- Doesn't account for dynamic libraries loaded after the fact,
but usually good enough since
1) Those aren't even present in some games
2) They usually only have about 1 or 2 fragments (dialogs) each.
- Make all texture access on non-existent textures return 0
- If border color is closer to 0, then set alpha to 0 as well (might break some corner cases with alpha test)
- Zero initialize null sampler
- Force mipmap count to 1 if sampling from an RTV/DSV
- TODO: Better wcb flush detection, it should be better to re-upload the texture after it has been dwnloaded if expected mipmaps are > 1
- Sometimes square renders are done to surfaces with pitch=64 and re-uploaded with swizzle scanning
-- This setup avoids discarding targets if they are square and pitch == 64
- Abort nv406e semaphore acquire if the rsx thread stalls/crashes
- Fix texture size approximation to take mipmaps into account. Fixes some games hanging with WCB
- Avoid unprotecting memory until just before we have to write the data
- Avoids race conditions where the caller thread takes too long to enter the second phase and another thread accesses the "bad" memory
- Reorganize storage hash vs ucode hash
- Scan for actual fragment program start in case leading NOPed code precedes the actual instructions
-- e.g FEAR2 Demo has over 32k of padding before actual program code that messes up hashes
- Fix VERTEX_DATA_3F_M element alignment (its 16 bytes per attribute)
- Fix DATA_2S_X interpretation type. Its signed 16-bit unnormalized (s32k) and not signed normalized (s1)
- Zeta pitch is ignored by real HW for some reason
- Monitor ptch value changes as well since they may affect disabled surfaces
- TODO: Verify if MRT pitch is really taken into consideration
- Discard intentionally invalidated framebuffer resources. These are created after a flush has happened, forcing reupload since contents cannot be guaranteed (strict mode only)
- Fix for blits using vulkan; dont use the copy method if formats do not match, use generic blit instead
- Handle aliased depth + color target by disabling depth writes. This looks to be the correct way
- Add support for generic passes that cannot be done using general imaging operations. Lays the framework for tons of features and effects
- Implement RGBA->D24D8 casting. Sometimes games will split depth texture into RGBA8 then use the new RGBA8 as a depth texture directly
-- This happens alot in ps3 games and I'm not sure why. Its likely the ps3 did not sample fp values with linear filtering so this is a workaround
-- Only implemented for openGL at the moment
-- Requires a workaround for an AMD driver bug
* Input: further work on remapping Xinput and begin work on remapping DS4
* Input: Improve pad_settings_dialog a bit and begin Remapping for XInput
* Input: begin evdev remapping and change all handlers to use cfg::string
* Input: finish work on remapping evdev
and some more crap
* Input: finish work on remapping Xinput and DS4
* Input: add DS4 Colors to DS4 config
* Input: Improve DS4 deadzone scaling
Jarves made some mistakes, so I'll fix them in the follow up commit
* Input: fix Jarves fixes on DS4 deadzone
and remove unnecessary usage of toUtf8
* Input: add primitive batterychecks to XInput and DS4
* Input: add mmjoystick remapping
* Input: Fix evdev and some Vibration issues
* Input: adjust capabilities to fix stick input for games like LoS 2
also fix threshold slider minimum
also add ps button to all the handlers
* Input: Further evdev work
based on danilaml code review and own debugging:
Fixed path issue, <= 0 issue, some captures, const, axis with same codes.
Adds a map to each device that differentiates negative and positive axis mappings.
adjusted rest of the file to tabs (ListDevices and beginning of threadProc)
* Input: use 20ms vibration update time for xbox one elite controllers.
* Input: Fix return type of Clamp()
* Input: Evdev Fix
* Input: Evdev Optional GetNextButtonPress
presumably better than the other
* Input: review changes
* Input: evdev: fix wrong index in axis handling
move bindpadtodevice down to keep consistency between handlers and not get crazy
* Input: evdev: fix expensive add_device in GetNextButtonPress
* cleanup
* Input: mmjoy: fix type
* Input: evdev: final fixes
* Input: evdev: exclude unnecessary buttons while mapping Xbox 360 or DS4
* Input: add deadzone preview by passing necessary values in callback
use 0.5 of max value for threshold in pad dialog
* Input: get rid of all-uppercase variables
Added force_boot to force boot on cmdline boot.
Load() caused a Stop() that exited the application with "Exit RPCS3 when process finishes" enabled. Now Stop is only called if the emu is not stopped
* Thread: unbreak on BSDs after dbc9bdfe02
Utilities/Thread.cpp:1920:2: error: unknown type name 'cpu_set_t'; did you mean 'cpusetid_t'?
cpu_set_t cs;
^~~~~~~~~
cpusetid_t
/usr/include/sys/types.h:84:22: note: 'cpusetid_t' declared here
typedef __cpusetid_t cpusetid_t;
^
Utilities/Thread.cpp:1921:2: error: use of undeclared identifier 'CPU_ZERO'
CPU_ZERO(&cs);
^
Utilities/Thread.cpp:1922:2: error: use of undeclared identifier 'CPU_SET'
CPU_SET(core, &cs);
^
Utilities/Thread.cpp:1923:48: error: unknown type name 'cpu_set_t'; did you mean 'cpusetid_t'?
pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cs);
^~~~~~~~~
cpusetid_t
* JIT: use MAP_32BIT on Linux and FreeBSD
Unless RLIMIT_DATA is low enough FreeBSD by default reserves lower 2Gb
for brk(2) style heap, ignoring mmap(2) address hint requested by RPCS3.
Passing MAP_32BIT fixes the following crash
Assertion failed: ((Type == ELF::R_X86_64_32 && (Value <= UINT32_MAX)) || (Type == ELF::R_X86_64_32S && ((int64_t)Value <= INT32_MAX && (int64_t)Value >= INT32_MIN))), function resolveX86_64Relocation, file /usr/ports/devel/llvm40/work/llvm-4.0.1.src/lib/ExecutionEngine/RuntimeDyld/RuntimeDyldELF.cpp, line 287.
* build: unbreak -DVULKAN_PREBUILT with system glslang on Unix
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:4:10: fatal error: '../../../../Vulkan/glslang/SPIRV/GlslangToSpv.h' file not found
#include "../../../../Vulkan/glslang/SPIRV/GlslangToSpv.h"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
rpcs3/CMakeFiles/rpcs3.dir/Emu/RSX/VK/VKCommonDecompiler.cpp.o: In function `vk::compile_glsl_to_spv(std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >&, glsl::program_domain, std::__1::vector<unsigned int, std::__1::allocator<unsigned int> >&)':
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x50e): undefined reference to `glslang::TProgram::TProgram()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x51d): undefined reference to `glslang::TShader::TShader(EShLanguage)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x542): undefined reference to `glslang::TShader::setStrings(char const* const*, int)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x581): undefined reference to `glslang::TShader::parse(TBuiltInResource const*, int, EProfile, bool, bool, EShMessages, glslang::TShader::Includer&)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x5d6): undefined reference to `glslang::TProgram::link(EShMessages)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x5f1): undefined reference to `glslang::GlslangToSpv(glslang::TIntermediate const&, std::__1::vector<unsigned int, std::__1::allocator<unsigned int> >&, glslang::SpvOptions*)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x5ff): undefined reference to `glslang::TShader::getInfoLog()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x61a): undefined reference to `glslang::TShader::getInfoDebugLog()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x630): undefined reference to `glslang::TShader::~TShader()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x63c): undefined reference to `glslang::TProgram::~TProgram()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x6d2): undefined reference to `glslang::TShader::~TShader()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x6de): undefined reference to `glslang::TProgram::~TProgram()'
rpcs3/CMakeFiles/rpcs3.dir/Emu/RSX/VK/VKCommonDecompiler.cpp.o: In function `vk::initialize_compiler_context()':
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x6f5): undefined reference to `glslang::InitializeProcess()'
rpcs3/CMakeFiles/rpcs3.dir/Emu/RSX/VK/VKCommonDecompiler.cpp.o: In function `vk::finalize_compiler_context()':
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x856): undefined reference to `glslang::FinalizeProcess()'
* build/msvc: add missing glslang include directory after 6bb3f1b4d75c
"c:\projects\rpcs3\rpcs3\VKGSRender.vcxproj" (default target) (15) ->
(ClCompile target) ->
Emu\RSX\VK\VKCommonDecompiler.cpp(4): fatal error C1083: Cannot open include file: 'SPIRV/GlslangToSpv.h': No such file or directory [c:\projects\rpcs3\rpcs3\VKGSRender.vcxproj]
- Fix texture cache blit behaviour when src has AA enabled and dst is a blit dst texture with or without AA
-- This requires handling AA resolve by removing a half downscale on multisampled axes
- Return all ones when a vertex attribute is disabled.
-- Some games forget to enable vertex attributes actually needed by the fs
- texture_cache: Fix internal size calculation for subresources
- vk: Delay dynamic state updates until just about to draw to ensure no flush has discarded the cb state
- In rare cases the driver derefs a nullptr and dies, taking the emulator with it
- From testing, it seems the vram is indeed freed when this happens so its "safe" to continue
- Support for raster offsets in surface descriptors (looks to be unused)
- Do not tag disabled render targets when using MRT (pitch = 64)
- Add missing notify_surface_changed() call for openGL
- Use AA mode to predict surface compression. Compression mode is useless without AA activated
- Rewrites most image subresource fetch routines to use the new heuristic
- Fix rsx:🧵:find_tile. FEED000(X) can be substituted for (X) in the code
-- Fixes alot of failures when looking for tiled regions
rsx: Fix antialiased unnormalized coords
- scaling factors are inverse to allow proper coordinates to be computed in fs
- Remove generic throws from the rsx pipeline. Stops the rsx thread from silently dying leaving the emulator in a hung state
- Hackplement add_signed and reverse_subtract_signed blend modes
- Reimplement fragment program fetch and rewrite texture upload mechanism
-- All of these steps should only be done at most once per draw call
-- Eliminates continously checking the surface store for overlapping addresses as well
addenda - critical fixes
- gl: Bind TIU before starting texture operations as they will affect the currently bound texture
- vk: Reuse sampler objects if possible
- rsx: Support for depth resampling for depth textures obtained via blit engine
vk/rsx: Minor fixes
- Fix accidental imageview dereference when using WCB if texture memory occupies FB memory
- Invalidate dirty framebuffers (strict mode only)
- Normalize line endings because VS is dumb
to flush_all is up to date. Should prevent recursive exceptions
Partially revert Jarves' fix to invalidate cache on tile unbind. This will
need alot more work. Fixes hangs
- Identify minimize/restore events as separate from regular resize and do not react to them
- Enable message queue consumption after loading the shaders cache. Also hides the frame in this step
-- This fixes the 'start fullscreen' bug when running vulkan
- This allows for better handling of deferred flushes.
-- There's still no guarantee that cache contents will have changed between the set acquisition and following flush operation
-- Hopefully this is rare enough that it doesnt cause serious issues for now
- vk: Always reopen primary command buffers. They should only be closed in flush_command_queue
- If uploading a texture and there are collisions with protected buffers, do not rebuild the cache
- Perform writes via flush before reprotecting pages that were not trampled
- Only flush no pages once
- Refactor invalidate memory functions into one function
- Add cached object rebuilding functionality to avoid throwing away useful memory on an invalidate
- Added debug monitoring of texture unit VRAM usage
- Emulate primitive restart in software whenever we get the chance
- Ensure PRIMITIVE_RESTART is never active when LIST topologies are active
- Reimplement TRIANGLE_FAN, POLYGON and QUAD expansion
- This communication is important in communicating window events. Helps properly synchronize swapchain management on vulkan and stops nvidia crashing
- Do not block the message queue lest the driver detect window as not responding
Implement sys_net syscalls
Clean libnet functions
Use libnet.sprx
Use libhttp.sprx
Use libssl.sprx
Use librudp.sprx
Implement sys_ss_random_number_generator
* spu: Rewrite interpreter fast FM
- Partially implement accurate FM
- Fix FMA/FMS/FNMS by removing an optimization that does not work for INF (cmpunord)
- cmpunord does not catch all cases of an extended result/overflow
- NOTE: FM still does not handle corner cases well (e.g inf * 1.2 because SPU does not have concept of inf)
rsx: Conditional lock hack removed
vulkan - Fixes
- Remove unused texture class
- Fix native pitch calculation (WCB)
rsx: Catch hanging begin/end pairs when flushing deferred draw calls
vulkan: Register DXT compressed formats
vulkan: Register depth formats
gl: Workaround for 'texture stitching' when gathering flip surface
- TODO: Add a proper flip hack option
rsx: Fix texture memory size calculation
- DXT textures dont have real pitch. Since pitch is used to calculate memory size, make sure it always evaluates to rsx_size
rsx: Fix cpu copy detection
rsx: Validate blit dst surface and dont make assumptions about region blit order
- Also relax restrictions on memory owned by the blit engine if strict rendering is not enabled
rsx: Fix depth texture detection
rsx: Do not manually offset into dst. The overlapped range check does so automatically
rsx: Minor optimizations
rsx: Minor fixes
- Fix to detect incompatible formats when using GPU texture scaling and show message
- Better 'is_depth_texture' algorithm to eliminate false positives
- Limits buffer size to min 720 in the Y axis (1024 section causes conflicts in some cases - TODO)
rsx: Fixups to allow large textures for blit operation
- Also includes checks for both leaking sections and blit regions for vulkan
hotfix for hanging when using WCB
addendum - unlock both ro and no blocks before attempting to copy memory blocks
gl: Fixups for ARB_explicit_uniform_location
- Forces glsl v 430 to make use of the extension
rsx/vk: Rework texture cache to minimize recursive access violations
- Also modifies the vulkan commandbuffer begin/end/submit mechanism
gl: Fix cached_texture_section::is_flushable to take memory protection into account
rsx: Fix blit dst offset calculation
gl/vk/rsx: Refactoring; unify texture cache code
gl: Fixups
- Removes rsx::gl::texture class and leave gl::texture intact
- Simplify texture create and upload mechanisms
- Re-enable texture uploads with the new texture cache mechanism
rsx: texture cache - check if bit region fits into dst texture before attempting to copy
gl/vk: Cleanup
- Set initial texture layout to DST_OPTIMAL since it has no data in it anyway at the start
- Move structs outside of classes to avoid clutter
gl: Fix multidraw [WIP]
rsx: Ignore vertex base when data source is generated using arithmetic
vk: Check pending flag before doing fence poke
vk/gl: Fix for inlined array and immediate draws
rsx: Collapse joined draws when batching
rsx: Blit engine improvements
- Always handle blits to and from framebuffers through the GPU
- Handle depth surfaces properly when using GL
- Check for format mismatches when blitting to the surface store [WIP]
- Make each frame context own its own memory
- Fix GPU blit
- Fix image layout transitions in flip
vk: Improve frame-local memory usage tracking to prevent overwrites
- Also slightly bumps VRAM requirements for stream buffers to help with running out of storage
- Fixes flickering and missing graphics in some cases. Flickering is still there and needs more work
vk: Up vertex attribute heap size and increase the guard size on it
vulkan: Reorganize memory management
vulkan: blit cleanup
vulkan: blit engine improvements
- Override existing image mapping when conflicts detected
- Allow blitting of depth/stencil surfaces
Fix rsx offscreen-render-to-display-buffer-blit surface reads
- Also, properly scale display output height if reading from compressed tile
gl: Fix broken dst height computation
- The extra padding is only there to force power-of-2 sizes and isnt used
gl: Ignore compression scaling if output is rendered to in a renderpass
rsx/gl/vk: Cleanup for GPU texture scaling. Initial impl [WIP]
- TODO: Refactor more shared code into RSX/common
Implemented _sys_process_exit2 syscall
Rewritten sys_game_process_exitspawn
Rewritten sys_game_process_exitspawn2
Implemented _sys_process_atexitspawn
Implemented _sys_process_at_Exitspawn
And some other changes
* Fixed sys_get_random_number generating less bytes than needed, and ceiling the buffer size in 0x1000 instead of failing
* Corrected alignment check in libgcm
* Now calling callback of sceNpManagerRegisterCallback
* Fixed trophies
Removes libad from ignore list.
It will only affect games that call for it, making them progress further with the Recompiler instead of dying in Unregistered Function, as there's no HLE implementation of libad.
Tested with Guitar Hero 5 [BLES00576]
- QUAD_STRIP evaluates to TRIANGLE_STRIP in memory. The memory layout is identical.
- The only difference between the two modes would be the primitive_ID but that doesnt matter on RSX
- Its worth noting that results will be different between the two modes if input vertices are non-coplanar for every set of N verts
Games like Tales of Vesperia seem to be using a random memory allocator with very low collision chance.
This means objects are very unlikely to be reused in such games leading to pile-up
- Do not set zfunc if alphakill is not enabled. This is because at the moment alphakill requires a different shader to be built
- use glsl loop-unroll friendly comparison; skip vertex input compare if either key requests it
- Minor tweaks to fp key generation
