zach
850d57a8f2
Refactor float conversion in CommonCLI to use strtof for improved precision and add ftoa3 function for formatting floats with three decimal places in TxtDataHelpers to fix display issue in app and repeater config ui in web
...
REPO:
1. Flash a repeater
2. Connect over lora
3. Set bw to 42.7 KHZ
It will revert back due to converting a double to a float.
REPO2:
1.Flash Repeater
2. Apply float fix
3. Set to say 20.8
4. try to get value via app or web cli repeater config
It wil show blank because it doesnt return a good value. It would be something like 20.7999992 which the app and web apps dont like so the ftoa3 rounds it and returns a 3 decimal point float
2025-11-14 21:51:28 -07:00
Stephan Rodemeier
16c294ce60
Allow SF smaller than 7 to be saved
2025-11-13 22:25:55 +01:00
ripplebiz
ba6b8535c9
Merge pull request #971 from fdlamotte/remove_set_setting_by_key
...
SensorManager: remove setSettingByKey
2025-11-11 23:40:13 +11:00
Florent
90e26129ee
Merge branch 'dev' into remove_set_setting_by_key
2025-11-11 12:23:12 +01:00
Scott Powell
b31d3e7b5f
* added StrHelper::fromHex()
2025-11-09 16:17:49 +11:00
Scott Powell
963290ea15
* repeater: various "region" CLI changes
...
* transport codes 0000 and FFFF reserved
2025-11-07 14:42:06 +11:00
Scott Powell
ddac13ae80
* repeater: CLI, added "region put" and "region remove" commands
2025-11-06 21:40:52 +11:00
Scott Powell
cf547da857
* RegionMap: get/set Home Region
...
* repeater: admin CLI, changed "allowf *", "denyf *", added "home"
2025-11-06 17:28:45 +11:00
Scott Powell
7419ed71f7
* region filtering now applied in allowPacketForward()
2025-11-06 12:27:25 +11:00
Scott Powell
82b4c1e6b0
* new PAYLOAD_TYPE_CONTROL (11)
...
* repeater: onControlDataRecv(), now responds to new CTL_TYPE_NODE_DISCOVER_REQ (zero hop only)
* node prefs: new discovery_mod_timestamp (will be set to affect when node should respond to DISCOVERY_REQ's )
2025-11-06 00:56:54 +11:00
Scott Powell
9ebeb477aa
* RegionMap: inverted 'flags' to _deny_ bits
...
* Mesh: new filterRecvFloodPacket() for overriding
* repeater CLI: 'allow' -> 'allowf' or 'denyf'
2025-11-05 14:34:44 +11:00
Scott Powell
d9ff3a4d02
* Mesh: new sendFlood() overload with transport codes.
...
* BaseChatMesh: sendFloodScoped(), for overriding with some outbound 'scope' / TransportKey
* companion: new 'send_scope' variable.
2025-11-04 01:21:56 +11:00
Scott Powell
ecd30f4d36
* new CLI commands: region, region load, region save, region get, region allow
2025-11-03 22:53:14 +11:00
Scott Powell
f797744f7c
* misc RegionMap and key store methods
2025-11-03 18:14:44 +11:00
Scott Powell
03fc949014
* setting up framework for Regions, TransportKeys, etc
2025-11-03 14:23:32 +11:00
ripplebiz
5b4544b9fe
Merge pull request #889 from fdlamotte/sensecap_indicator
...
Sensecap indicator
2025-11-03 11:09:17 +11:00
ripplebiz
920ac51c8c
Merge pull request #998 from tahnok/bmp085-sensor
...
Add support for bmp085/bmp180 temperature/pressure sensor
2025-11-03 10:58:22 +11:00
Scott Powell
7755400a35
* Companion: Now using transport codes { 0, 0 } when Share contact zero hop.
...
* Repeater: onAdvertRecv(), adverts via Share now NOT added to neighbours table
2025-10-31 20:40:22 +11:00
ripplebiz
7ad45d113c
Merge pull request #993 from recrof/allow_lower_bw_sf
...
allow saving spreading factor from 5 and bandwidth from 7.8kHz
2025-10-31 16:58:35 +11:00
Scott Powell
7abe6c9693
* Upping max channel hash conflicts to 4 (was 2)
2025-10-31 16:54:58 +11:00
Scott Powell
3d9378d91e
* Fix for VolatileRTCClock wrapping around to initial synced time every 49 days
2025-10-30 16:45:50 +11:00
Michael Hart
81ab944682
Adds serial commands to get stats
...
- Added formatStatsReply, formatRadioStatsReply, and formatPacketStatsReply methods in MyMesh for both simple_repeater, simple_room_server, and simple_sensor.
- Updated CommonCLI to handle new stats commands.
2025-10-28 23:55:49 -07:00
Woodie-07
0e259a63ed
lr1110 irq fixes
...
fix incorrect irqs used in isReceiving. also remove getTimeOnAir override as fixed upstream
2025-10-25 22:12:30 +01:00
fdlamotte
6d6db10ac5
Merge pull request #1012 from Woodie-07/dev
...
New workaround for LR1110 shift issue
2025-10-25 09:14:11 +02:00
Woodie-07
2981fc70e1
new workaround
2025-10-24 20:12:02 +01:00
Wesley Ellis
4cfbd3bad5
Switch BMP085 mode to 0 for ULTRALOWPOWER
2025-10-22 16:53:11 -04:00
Wesley Ellis
ac15131296
Add support for bmp085/bmp180 temperature/pressure sensor
2025-10-22 16:17:06 -04:00
recrof
87677fda76
allow spreading factor from 5 and bandwidth from 7.8kHz
2025-10-22 15:15:29 +02:00
ripplebiz
dab44a1bb0
Merge pull request #967 from fdlamotte/remove_target_h_dep
...
CommonCli: Remove dependency on target.h
2025-10-19 14:25:20 +11:00
ripplebiz
53a2ae97ea
Merge pull request #923 from recrof/tlora_1.6_cleanup
...
TLora V2.1 1.6 cleanup
2025-10-19 14:15:55 +11:00
ripplebiz
798725d450
Merge pull request #922 from recrof/station_g2_cleanup
...
station g2 cleanup
2025-10-19 14:11:20 +11:00
ripplebiz
a222578041
Merge pull request #921 from recrof/heltec_v2_cleanup
...
heltec v2 cleanup
2025-10-19 14:07:16 +11:00
ripplebiz
ebf4599c92
Merge pull request #920 from recrof/heltec_v3_cleanup
...
heltec v3 cleanup
2025-10-19 14:01:50 +11:00
Florent
37dc715a8e
SensorManager: remove setSettingByKey
2025-10-18 23:37:58 +02:00
Florent
ce70792309
lgfx_display: better handle display class construction
2025-10-18 14:03:27 +02:00
Florent
3210475f35
CommonCli: Remove dependency on target.h
2025-10-18 12:33:43 +02:00
ripplebiz
666447eafc
Merge pull request #955 from liquidraver/dev
...
Add simple BME680 support to RAK (RAK1906)
2025-10-18 15:06:05 +11:00
fdlamotte
15ecf186fa
Merge pull request #953 from Woodie-07/dev
...
LR1110 packet shift issue workaround
2025-10-17 15:26:09 +02:00
Woodie-07
02351abc2d
change println to debug macro in lr1110 patch
2025-10-16 16:25:18 +01:00
liquidraver
3c48f01601
BME680 library doesn't have altitude calculation, we can add it here to match other sensors'
2025-10-16 11:29:22 +02:00
liquidraver
0e7486552d
Add simple BME680 support to RAK with adafruit library
2025-10-16 10:17:23 +02:00
Scott Powell
cd920693ec
* UITask: new UI_HAS_JOYSTICK
...
* MomentaryButton: new constructor 'multiclick' param
* WIoTrackerL1: now just use joystick, joystick press for KEY_ENTER, no multi-click for snappier UI
2025-10-16 17:33:22 +11:00
Scott Powell
d3be6afccb
* fix for non-RAK targets
2025-10-15 22:51:05 +11:00
Scott Powell
fa8c31be88
* fix for RAK12500 GPS (I2C)
2025-10-15 22:47:55 +11:00
ripplebiz
34b9a1c9dc
Merge pull request #916 from Quency-D/dev-heltec_tracker_v2
...
add heltec tracker v2
2025-10-14 12:45:15 +11:00
fdlamotte
633538d9c7
Merge pull request #918 from recrof/xiao_c3_refresh
...
xiao c3 cleanup
2025-10-12 19:10:47 +02:00
Woodie-07
8426fddcb7
workaround for LR1110 shift issue
...
it seems that if the LR1110 radio hears a packet corrupted in a specific way, it'll report a packet of 0 length and with the header error IRQ set. every packet received afterwards will then be shifted to the right by 4 bytes on top of the radio's reported offset. this can occur multiple times with the shift increasing by 4 bytes each time. thus, this patch will read from an additional offset after hearing the trigger packet.
transmitting seems to reset the shift - unsure exactly what operation resets it but standby() is called after tx so patch assumes shift is 0 after standby(). more investigation may be needed here.
2025-10-12 16:09:57 +01:00
Scott Powell
93c0180740
* Refactor: advert_loc_policy now applied in new method CommonCLI::buildAdvertData()
2025-10-12 12:49:26 +11:00
Scott Powell
837e7dcbdb
* Advert type fix
...
* GPS pref defaults tidy
2025-10-12 12:33:20 +11:00
recrof
69cddbca4e
move LilyGoTLoraBoard.h to variants, use template in platformio.ini, cleanup
2025-10-12 00:32:26 +02:00
