meshcore-dev/MeshCore
1
0
Fork 0
mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-04-20 22:13:47 +00:00
Code Issues Projects Releases Packages Wiki Activity
2646 commits 4 branches 95 tags 201 MiB
Commit graph

2646 commits

This branch
This branch
All branches
Author SHA1 Message Date
Malkavien
8056344b86 fix(waveshare-rp2040): add SX126X_RXEN=17 to restore RX sensitivity 
The Waveshare RP2040-LoRa board has an RF switch with two complementary
control lines:
- DIO2 (CTRL)  -- driven automatically by the SX1262 chip: HIGH on TX,
  LOW on RX
- GPIO17 (!CTRL) -- was not configured in MeshCore, so it floated and
  the switch never properly selected the LNA/RX path

Without this pin driven, the RF switch never switches to RX mode,
resulting in completely degraded reception. TX was unaffected because
DIO2 alone is sufficient to activate the TX path.

Adding SX126X_RXEN=17 lets RadioLib drive GPIO17 as the complement of
DIO2, so the switch correctly routes the signal to the LNA on receive.

Reference: https://files.waveshare.com/wiki/RP2040-LoRa/Rp2040-lora-sch.pdf
 2026-04-12 14:49:42 +02:00
Liam Cottle
a9de5bfc0c
Merge pull request #1612 from weebl2000/default-button-low 
Default button polarity to active-LOW across all firmware types
 2026-04-12 23:30:28 +12:00
Liam Cottle
612aa66fc8
Merge pull request #2075 from pcmoore/working-ina3221 
RFE: allow for INA3221 macro overrides in platform.io files
 2026-04-12 22:49:17 +12:00
Liam Cottle
f2b61f1ce5
Merge pull request #1425 from thomasabbott/tcxo_voltage_fix_rp2040 
RP2040 Update SX126X_DIO3_TCXO_VOLTAGE to 1.8 V
 2026-04-12 22:45:00 +12:00
Liam Cottle
c92cd219d1
Merge pull request #2164 from Snayler/dev 
Fix Heltec Wireless Paper battery reading
 2026-04-12 21:17:42 +12:00
Snayler
d360931aa7
Merge branch 'meshcore-dev:dev' into dev 2026-04-10 18:31:52 +01:00
Liam Cottle
be780491ac
Merge pull request #2263 from jirogit/fix/thinknode-m5-wifi-credentials 
fix: remove real WiFi credentials from ThinkNode M5 variant
 2026-04-06 21:23:40 +12:00
me
d9cfd075a5 fix: remove real WiFi credentials from ThinkNode M5 variant 
variants/thinknode_m5/platformio.ini contained actual WiFi SSID and
password credentials (Livebox-633C) committed by mistake. Replaced
with placeholder values consistent with other variants (myssid/mypwd).
 2026-04-05 22:50:59 -07:00
Wessel Nieboer
057542625b
Fix T1000E press=high 2026-04-04 13:19:13 +02:00
Wessel Nieboer
0a13ac7fc7
Default button polarity to active-LOW across all firmware types 
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
 2026-04-04 13:19:13 +02:00
Andy Shinn
fb726e48c2
Allows us to have custom PlatformIO envs and configs (#2234)
Some checks are pending
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Waiting to run
PR Build Check / build (Heltec_v3_repeater) (push) Waiting to run
PR Build Check / build (Heltec_v3_room_server) (push) Waiting to run
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Waiting to run
PR Build Check / build (PicoW_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Waiting to run
PR Build Check / build (RAK_4631_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_room_server) (push) Waiting to run
PR Build Check / build (wio-e5-mini_repeater) (push) Waiting to run
 2026-04-04 17:34:29 +13:00
Liam Cottle
0afd5a9336
Merge pull request #2244 from jirogit/fix/generic-espnow-advert-name 
fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room')
 2026-04-04 17:24:50 +13:00
Liam Cottle
d04ff17b8c
Merge pull request #2243 from jirogit/fix/thinknode-m5-advert-name 
fix: correct ADVERT_NAME for ThinkNode M5 (was M2)
 2026-04-04 17:23:44 +13:00
jirogit
6769b74df6 fix: correct ADVERT_NAME for Generic ESPNow room server (was 'Heltec Room') 
env:Generic_ESPNOW_room_svr was using 'Heltec Room' as ADVERT_NAME,
causing Generic ESPNow room server nodes to advertise with the wrong
device name on the mesh.
 2026-04-03 19:08:15 -07:00
jirogit
ce32d91ecb fix: correct ADVERT_NAME for ThinkNode M5 (was M2) 
Repeater and Room Server environments in variants/thinknode_m5/platformio.ini
were using 'Thinknode M2' as the ADVERT_NAME, causing M5 nodes to advertise
with the wrong device name on the mesh.

- env:ThinkNode_M5_Repeater: 'Thinknode M2 Repeater' -> 'Thinknode M5 Repeater'
- env:ThinkNode_M5_room_server: 'Thinknode M2 Room Server' -> 'Thinknode M5 Room Server'
 2026-04-03 18:55:39 -07:00
KPrivitt
27f732653b
Added RAK12035 Soil Moisture and Temperature Sensor (#2223)
Some checks failed
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (Heltec_v3_repeater) (push) Has been cancelled
PR Build Check / build (Heltec_v3_room_server) (push) Has been cancelled
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Has been cancelled
PR Build Check / build (PicoW_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (RAK_4631_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_room_server) (push) Has been cancelled
PR Build Check / build (wio-e5-mini_repeater) (push) Has been cancelled
 2026-04-03 22:54:24 +13:00
ripplebiz
f5c0a7440d
Merge pull request #2227 from Quency-D/fix-BME680
Some checks failed
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (Heltec_v3_repeater) (push) Has been cancelled
PR Build Check / build (Heltec_v3_room_server) (push) Has been cancelled
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Has been cancelled
PR Build Check / build (PicoW_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (RAK_4631_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_room_server) (push) Has been cancelled
PR Build Check / build (wio-e5-mini_repeater) (push) Has been cancelled
Fixed the initialization error of the BME680 sensor.
 2026-04-02 15:51:26 +11:00
Liam Cottle
d0450bca99
Merge pull request #2228 from liamcottle/refactor/gat562-mesh-watch 
Refactor GAT562 Mesh Watch
 2026-04-02 17:19:12 +13:00
Quency-D
2cbe0c0398 Fixed the initialization error of the BME680 sensor. 2026-04-02 10:24:17 +08:00
Liam Cottle
b934daa990
Merge pull request #2007 from khudson/r1neo
Some checks are pending
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Waiting to run
PR Build Check / build (Heltec_v3_repeater) (push) Waiting to run
PR Build Check / build (Heltec_v3_room_server) (push) Waiting to run
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Waiting to run
PR Build Check / build (PicoW_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Waiting to run
PR Build Check / build (RAK_4631_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_room_server) (push) Waiting to run
PR Build Check / build (wio-e5-mini_repeater) (push) Waiting to run
Muzi Works R1 Neo support
 2026-04-02 00:36:44 +13:00
Liam Cottle
fcad0dc7ed
Apply suggestion from @weebl2000 
Co-authored-by: Wessel <wessel@weebl.me>
 2026-04-02 00:27:58 +13:00
Liam Cottle
8fc9e1736c
Apply suggestion from @weebl2000 
Co-authored-by: Wessel <wessel@weebl.me>
 2026-04-02 00:23:52 +13:00
liamcottle
b37201db89 double press top button to go back on gat562 mesh watch 2026-04-01 21:51:32 +13:00
liamcottle
1a897a3b5f use top button to wake hibernated gat562 mesh watch 2026-04-01 21:50:33 +13:00
Liam Cottle
856df241ee
Merge pull request #2138 from MGJ520/dev_GAT562_Mesh_Watch13
Some checks failed
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (Heltec_v3_repeater) (push) Has been cancelled
PR Build Check / build (Heltec_v3_room_server) (push) Has been cancelled
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Has been cancelled
PR Build Check / build (PicoW_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (RAK_4631_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_room_server) (push) Has been cancelled
PR Build Check / build (wio-e5-mini_repeater) (push) Has been cancelled
Support for GAT562 Mesh Watch13 device
 2026-03-31 21:54:38 +13:00
Liam Cottle
7fc32639a6
Merge pull request #2202 from terminalvelocity23/fix/discover-neighbors-public 
Move sendNodeDiscoverReq() from private to public to enable post-boot neighbor discovery
 2026-03-31 21:27:27 +13:00
ripplebiz
f8fcc1717a
Merge pull request #2190 from brianwiddas/espnow-missing-methods 
Add missing methods in ESPNOWRadio()
 2026-03-31 15:24:27 +11:00
terminalvelocity23
08de3fb01f Make sendNodeDiscoverReq() public for post-boot discovery 2026-03-30 22:35:05 +03:00
Brian Widdas
811ac1cd02 Add missing methods in ESPNOWRadio() 
ESP-NOW radios (ie, Generic_ESPNOW_* variants) do not compile due to
missing methods

Changes in January 2026 (019bbf74) to add additional stats (receive errors)
to CMD_GET_STATS was not implemented in the ESPNOWRadio() class

Changes in March 2026 (9a95e25e) to add setRxBoostedGainMode to all devices
rather than just SX1262/SX1268 were not applied to the ESPNowRadio() driver

Specifically, this change adds the following to ESPNOWRadio()
* getPacketsRecvErrors()    - always returns 0
* getRxBoostedGainMode()    - always returns false
* setRxBoostedGainMode()    - does nothing
 2026-03-30 04:25:08 +01:00
ripplebiz
bdeb7d8053
Merge pull request #1982 from weebl2000/radiolib7.6.0
Some checks are pending
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Waiting to run
PR Build Check / build (Heltec_v3_repeater) (push) Waiting to run
PR Build Check / build (Heltec_v3_room_server) (push) Waiting to run
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Waiting to run
PR Build Check / build (PicoW_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Waiting to run
PR Build Check / build (RAK_4631_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_room_server) (push) Waiting to run
PR Build Check / build (wio-e5-mini_repeater) (push) Waiting to run
Bump RadioLib to 7.6.0
 2026-03-30 14:02:08 +11:00
Scott Powell
efc875b1b6 * more notes about number_allocations 2026-03-30 13:53:16 +11:00
Scott Powell
6fb8e60b5f * number_allocations.md data-type range changes 2026-03-30 11:53:27 +11:00
Scott Powell
515af35b13 * docs changes for PAYLOAD_TYPE_GRP_DATA 2026-03-29 06:33:35 +11:00
Snayler
bfdd5fb571
Fix formatting of ADC_MULTIPLIER definition 2026-03-27 01:23:04 +00:00
Snayler
4b25f0a3df
Add correct ADC_MULTIPLIER definition to Heltec Wireless Paper 2026-03-27 01:19:46 +00:00
Snayler
50e9456f28
Define ADC_MULTIPLIER for adjustable ADC calculation 2026-03-27 01:17:39 +00:00
MGJ
76be69dcde Reduce unnecessary compilation time 2026-03-26 16:32:00 +08:00
ripplebiz
517f2f1efd
Merge pull request #1961 from weebl2000/dutycycle-command
Some checks failed
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (Heltec_v3_repeater) (push) Has been cancelled
PR Build Check / build (Heltec_v3_room_server) (push) Has been cancelled
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Has been cancelled
PR Build Check / build (PicoW_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (RAK_4631_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_room_server) (push) Has been cancelled
PR Build Check / build (wio-e5-mini_repeater) (push) Has been cancelled
Add get/set dutycycle command
 2026-03-26 11:54:41 +11:00
fdlamotte
15b246924e
Merge pull request #2121 from archef2000/patch-1
Some checks are pending
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Waiting to run
PR Build Check / build (Heltec_v3_repeater) (push) Waiting to run
PR Build Check / build (Heltec_v3_room_server) (push) Waiting to run
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Waiting to run
PR Build Check / build (PicoW_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Waiting to run
PR Build Check / build (RAK_4631_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_room_server) (push) Waiting to run
PR Build Check / build (wio-e5-mini_repeater) (push) Waiting to run
Fix typo for ThinkNode M5 room server environment
 2026-03-25 16:03:09 -04:00
Scott Powell
2325973fec * Companion: applyGPSPrefs() now just in one place (moved out of UITask)
Some checks are pending
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Waiting to run
PR Build Check / build (Heltec_v3_repeater) (push) Waiting to run
PR Build Check / build (Heltec_v3_room_server) (push) Waiting to run
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Waiting to run
PR Build Check / build (PicoW_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Waiting to run
PR Build Check / build (RAK_4631_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_room_server) (push) Waiting to run
PR Build Check / build (wio-e5-mini_repeater) (push) Waiting to run
 2026-03-25 16:26:51 +11:00
Liam Cottle
8637a749f7
Merge pull request #2018 from got-root/fix/companion-radio-gps-persistence
Some checks are pending
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Waiting to run
PR Build Check / build (Heltec_v3_repeater) (push) Waiting to run
PR Build Check / build (Heltec_v3_room_server) (push) Waiting to run
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Waiting to run
PR Build Check / build (PicoW_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Waiting to run
PR Build Check / build (RAK_4631_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_room_server) (push) Waiting to run
PR Build Check / build (wio-e5-mini_repeater) (push) Waiting to run
fix(companion_radio): apply persisted GPS enabled setting on boot for ui-orig devices
 2026-03-25 09:38:03 +13:00
Alejandro Ramirez
f8dbdce6bb
fix: apply persisted GPS enabled setting on boot for companion radio 
The companion_radio example was not restoring the GPS enabled/disabled
preference from flash after reboot. The preference was being saved
correctly when toggled via the mobile app, but on boot,
sensors.begin() -> initBasicGPS() unconditionally sets gps_active=false
and nothing subsequently restored the persisted state.

Added applyGpsPrefs() (matching the pattern in simple_repeater,
simple_sensor, and simple_room_server) and call it from main.cpp
after sensors.begin() to ensure the GPS hardware is initialized
before the saved preference is applied.
 2026-03-24 09:10:09 -05:00
MGJ
cd6c09a0d9 Support for GAT562 Mesh Watch13 device 2026-03-24 14:16:48 +08:00
Wessel Nieboer
37d1a75e7c
Merge branch 'dutycycle-command' of github.com:weebl2000/MeshCore into dutycycle-command 2026-03-24 03:08:54 +01:00
Wessel Nieboer
fb08fc0b1e
restore docs 2026-03-24 03:08:18 +01:00
Liam Cottle
bdf10506f2
Merge pull request #2134 from jeroenvermeulen/station-g2-default-radio-rxgain
Some checks are pending
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Waiting to run
PR Build Check / build (Heltec_v3_repeater) (push) Waiting to run
PR Build Check / build (Heltec_v3_room_server) (push) Waiting to run
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Waiting to run
PR Build Check / build (PicoW_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Waiting to run
PR Build Check / build (RAK_4631_repeater) (push) Waiting to run
PR Build Check / build (RAK_4631_room_server) (push) Waiting to run
PR Build Check / build (wio-e5-mini_repeater) (push) Waiting to run
Fix default radio.rxgain for Station G2
 2026-03-24 14:11:08 +13:00
Jeroen Vermeulen
da689c8e91
Fix default radio.rxgain for Station G2 
As @LitBomb pointed out in his [comment](https://github.com/meshcore-dev/MeshCore/issues/2118#issuecomment-4108168109) on #2118 RX Boosted Gain should not be enabled for the Station G2.

This change is a fix for #2124 to make the default of `radio.rxgain` to be OFF on the Station G2.

This restores the pre-1.14.1 behaviour with the only change being the user is now able to change the setting in the CLI.
 2026-03-23 23:06:42 +01:00
Wessel Nieboer
728b586c3a
Address comments 2026-03-23 14:31:08 +01:00
Wessel Nieboer
741392889d
Fix memcp compare length off by one 
Co-authored-by: ViezeVingertjes <michael.overhorst@gmail.com>
 2026-03-23 14:31:08 +01:00
Wessel Nieboer
0aa0ec1f16
Add get/set dutycycle command 
We translate to af internally, it's easier to store and doesn't break
stored prefs. Made get/set af command show deprecated, but it still
works fine.
 2026-03-23 14:31:07 +01:00