ripplebiz
1897f51458
Merge pull request #601 from khudson/dev
...
Adding support for Ikoka Stick with Seeed Xiao nRF54 baseboard.
2025-08-11 11:46:11 +10:00
ripplebiz
a2eed714f5
Merge pull request #595 from gumbero/main
...
Added room option to T-Beam SX1276
2025-08-11 11:30:29 +10:00
kelsey hudson
bed311313a
Adding support for Ikoka Stick with Seeed Xiao nRF54 baseboard.
...
Adds a new variant 'ikoka_stick_nrf' and associated support files. This is
based on the Xiao nRF54 code with pin numbers and functions changed to suit the
differences in hardware between the WIO SX1262 board and the Ikoka Stick.
Sets the default LoRa transmit power to 9dBm to avoid burning up the frontend
in Ikoka Sticks equipped with the Ebyte 33dBm S22 module on first boot.
Adds support for an SSD1306 display connected to the display header. Note the
display pinout is the same as the RAK4631 display header so make sure to use a
display wired accordingly (aliexpress etc. SSD1306s typically have Vcc & GND
reversed from what this board expects).
Adds support for display rotation to SSD1306Display via a platformIO define.
This support was added following the same paradigms found elsewhere in the code
for rotating a display.
2025-08-10 10:44:00 -07:00
gumbero
af7db5593b
Update platformio.ini
2025-08-10 14:25:43 +02:00
ripplebiz
72d13ca867
Merge pull request #594 from wel97459/dev
...
Changed waveshare_rp2040_lora radio_init function to use radio.std_init
2025-08-10 12:22:07 +10:00
Tomas Gabor
6e26a6a78c
Added room option to T-Beam SX1276
2025-08-09 21:28:31 +02:00
wel97459
331a29b082
Changed radio_init to use radio.std_init this also changes the preamble to 16 as before it was 8
2025-08-08 20:17:06 -07:00
ripplebiz
a310a5c4d5
Merge pull request #584 from 446564/nano-g2-gps-fix
...
nano g2 gps fixes
2025-08-07 12:57:07 +10:00
Ded
4d97bee02a
good oops
2025-08-06 18:52:57 -07:00
ripplebiz
6b2836ea07
Merge pull request #579 from alexbegoon/feature/add_meshimi_support
...
Add Meshimi support
2025-08-07 11:35:39 +10:00
446564
53c1f70412
various fixes for nano g2 gps
...
- baud rate changed to default
- switch state detected at boot to enable position
- small edge cases fixed
- more mesh debugging output added
Co-authored-by: LitBomb <lithangw@hotmail.com>
Co-authored-by: Nick from BOSTON
2025-08-06 11:41:37 -07:00
Alexander Begoon
fa3500944b
Add Meshimi configuration and environment setups in platformio.ini
2025-08-05 18:45:20 +02:00
Scott Powell
d1e13d0b9e
Revert "disable led light on t-echo device"
...
This reverts commit 55453e1136
2025-08-05 18:45:20 +02:00
TasmanDevil
6214b75e83
disable led light on t-echo device
2025-08-05 18:45:20 +02:00
Quency-D
fb8a4d12b1
refactor variants #393
2025-08-05 15:24:51 +08:00
Quency-D
612dde73e9
Add HELTEC MeshSolar board.
2025-08-04 14:29:49 +08:00
recrof
6861b0702f
create sensor template in platformio.ini, update heltec v3 and rak4631 to use new template
2025-08-02 21:40:56 +02:00
ripplebiz
d13dc10bf3
Merge pull request #564 from oltaco/fix-wiotracker-l1-board
...
WioTracker L1 various fixes
2025-08-02 19:36:57 +10:00
taco
a49b5aaba7
fix: wrong QSPI pins for wio tracker l1
2025-08-02 04:07:07 +10:00
ripplebiz
0a2d132d84
Merge pull request #547 from fdlamotte/sensors_gpio
...
sensors: gpio command
2025-08-01 19:06:44 +10:00
446564
dca20ea994
add wsl3 usb companion
2025-07-29 15:56:07 -07:00
Martin Kudlacek
822850b4d5
Support for Sensirion SHT4x
2025-07-28 10:02:31 +02:00
Martin Kudlacek
a96d1022a0
Added support for TI INA260
2025-07-28 09:41:06 +02:00
Scott Powell
b0946b3f6b
Revert "disable led light on t-echo device"
...
This reverts commit 55453e1136
2025-07-27 20:38:20 +10:00
TasmanDevil
55453e1136
disable led light on t-echo device
2025-07-25 22:53:56 +02:00
recrof
2e346bc61c
promicro: added sensor role
2025-07-24 17:37:35 +02:00
Rastislav Vysoky
9485488f6e
Merge branch 'ripplebiz:dev' into dev
2025-07-23 12:18:05 +02:00
recrof
e48e64ae84
fix: bad linker directory; added companion ble and usb roles
2025-07-23 12:17:40 +02:00
ripplebiz
c2266026a0
Merge pull request #541 from recrof/dev
...
enable all ESM sensors on RAK4631
2025-07-23 13:44:23 +10:00
Florent
b5a8a1a883
sensors: gpio command
2025-07-22 21:08:15 +02:00
recrof
f88ebad604
enable all sensors on RAK4631
2025-07-21 15:30:14 +02:00
taco
296a1e45fb
fix: Wio Tracker L1: correct joystick press button pin
2025-07-21 18:17:32 +10:00
ripplebiz
c6d4b7513f
Merge pull request #538 from oltaco/ct62-std-init
...
Heltec CT62: use radio.std_init()
2025-07-19 17:25:10 +10:00
taco
c5783660c4
radio.std_init() for heltec ct62
2025-07-19 16:09:54 +10:00
ripplebiz
a2e3e6607e
Merge pull request #534 from mikenz/heltec-v3-sensor
...
Allow the SDA and SCL pins for Environment sensors to be configured independently of the OLED I2C
2025-07-18 20:33:48 +10:00
Florent
9be28c2002
rak3x72: sensor target
2025-07-18 12:18:03 +02:00
Mike Cochrane
93802fe250
Add VL53L0X time-of-flight distance sensor to Heltec V3 Sensor
2025-07-18 22:01:47 +12:00
Mike Cochrane
9f2a77c92e
Add Melexis Contact-less Infrared Sensor - MLX90614 to Heltec V3 Sensor
2025-07-18 18:51:00 +12:00
Mike Cochrane
e4f7b9e37f
Allow the SDA and SCL pins for Environment sensors to be configured independantly. Add Heltec V3 Sensor.
2025-07-18 18:16:59 +12:00
cod3doomy
6b4592bfe2
Cleanup and fixes
...
-Added RAK_4631 define back
-Added includes for common RAK sensors that are currently supported in ESM
-Set global variables to static
-Reduced delay time within the RAK gps init sequence
2025-07-17 10:42:18 -07:00
cod3doomy
73b1ac5190
Merge branch 'ripplebiz:dev' into dev
2025-07-17 08:49:02 -07:00
cod3doomy
660ab0692f
RAK4631 ESM Migration
...
Changes to migrate sensor code to the ESM.
Added a separate GPS init sequence for the RAK that scans I2C and Serial1 on the various sockets of the various base boards to find the RAK12500. (and soon the RAK12501)
Removed the GPS specific envs from platformio.ini and enabled GPS for all envs.
Verified working with RAK12500 on RAK19007 sockets A and D, as well as RAK19003.
2025-07-16 19:04:50 -07:00
Rastislav Vysoky
2c9dc8d351
Merge branch 'ripplebiz:dev' into dev
2025-07-16 20:05:21 +02:00
taco
3f996ef4fc
fix: Wio Tracker L1: add DIO2 as rfSwitch and correct TCXO voltage.
2025-07-16 12:25:16 +10:00
Rastislav Vysoky
a6c8dc4866
Merge branch 'ripplebiz:dev' into dev
2025-07-15 12:19:51 +02:00
ripplebiz
2c9a2ee18f
Merge pull request #523 from recrof/patch-12
...
sensecap_solar: disable GPS until it's supported
2025-07-14 10:51:38 +10:00
Rastislav Vysoky
3c92c6aa3b
sensecap_solar: disable GPS until it's supported
2025-07-13 22:41:27 +02:00
Rastislav Vysoky
f9e595687e
Heltec Wireless Paper fix: radio init failed: -2
2025-07-13 15:21:02 +02:00
recrof
6be8e19a9f
move radiolib wrappers to dedicated directory
2025-07-13 11:37:33 +02:00
recrof
854a8dfe2f
move rak to nrf52_core, remove nrf52840_core
2025-07-12 20:06:56 +02:00
