meshcore-dev/MeshCore
1
0
Fork 0
mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-04-20 22:13:47 +00:00
Code Issues Projects Releases Packages Wiki Activity

Add centralized LEDManager for configurable LED behavior

Browse source 
Adds a LEDManager class (src/helpers/ui/LEDManager.h) that centralizes
all LED control into one component with begin()/loop() lifecycle and
per-pin active-HIGH/LOW polarity support.

LED settings are exposed as custom vars (led.status, led.activity)
accessible via companion radio binary protocol, CLI set/get commands,
and the SensorManager settings interface.

Status LED modes: off, boot-30s, slow blink (200ms/4s), always on.
Activity LED modes: off, BLE only, LoRa TX only, BLE + LoRa TX.

Integrated into 23 board variants, replacing scattered hardcoded
digitalWrite calls in onBeforeTransmit/onAfterTransmit/powerOff.
This commit is contained in:
Ryan Gregg 2026-03-20 18:19:44 -07:00
parent 467959cc3b
commit e2aa33b3a0
60 changed files with 497 additions and 185 deletions
Download patch file Download diff file Expand all files Collapse all files

5
variants/t1000-e/T1000eBoard.cpp
View file

@ -20,4 +20,9 @@ void T1000eBoard::begin() {
Wire.begin();
delay(10); // give sx1262 some time to power up
// Start LEDs with defaults; prefs are applied after loadPrefs()
static LEDManager _ledManager(LED_GREEN, -1);
ledManager = &_ledManager;
ledManager->begin(LED_STATUS_BOOT_30S, LED_ACTIVITY_BOTH);
}

6
variants/t1000-e/T1000eBoard.h
View file

@ -3,6 +3,7 @@
#include <MeshCore.h>
#include <Arduino.h>
#include <helpers/NRF52Board.h>
#include <helpers/ui/LEDManager.h>
class T1000eBoard : public NRF52BoardDCDC {
protected:
@ -80,9 +81,8 @@ public:
#ifdef BUTTON_PIN
while(digitalRead(BUTTON_PIN));
#endif
#ifdef LED_PIN
digitalWrite(LED_PIN, LOW);
#endif
if (ledManager) ledManager->powerOff();
#ifdef BUTTON_PIN
nrf_gpio_cfg_sense_input(BUTTON_PIN, NRF_GPIO_PIN_NOPULL, NRF_GPIO_PIN_SENSE_HIGH);