LoRa_APRS_iGate/README.md

Richonguzman / CD2RXU LoRa APRS iGate

Firmware for Tx and Rx !!!

LoRa APRS iGATE for:

• LILYGO ESP32 LoRa v2-1-1.6
• ESP32 Wroom Dev + SX1278 LoRa Module for a DIY Version

---

Achievements:

• listening to LoRa packets the same as messages for Stations/Callsing in near 80Kms.
• transmiting messages listened from APRS-IS to LoRa

---

Instrucctions (add your information into the '/data/igate_conf.json'):

1.- Change "callsign" from "NOCALL-10" to your CALLSIGN + SSID

2.- Change "SSID" from "WiFi_AP_1" to your WIFI-NAME

3.- Change "Password" from "password_WiFi_2" to your WIFI-PASSWORD

4.- Add the GPS to "Latitude" and "Longitude" (info from GoogleMaps) of new LoRa iGate

5.- Change "passcode" from "XYZVW" to yours (remember that is 5 digits integer)

Enjoy!!!

Hope You Enjoy this, 73 !! CD2RXU , Valparaiso, Chile