mirror of
https://github.com/richonguzman/LoRa_APRS_iGate.git
synced 2026-01-23 17:20:15 +01:00
103 lines
5 KiB
Markdown
103 lines
5 KiB
Markdown
# Richonguzman / CD2RXU LoRa APRS iGate/Digirepeater
|
|
|
|
## If you have the 2023.06.12 firmware (or later) you can update newer <a href="https://github.com/richonguzman/LoRa_APRS_iGate/tree/main/firmware" target="_blank">in here</a> , look for newest an upload over OTA (without needing VSCODE)
|
|
|
|
This next generation LoRa iGate can work as:
|
|
- pure RX-iGate,
|
|
- Rx+Tx-iGate and distribute messages and weather forecasts to heard trackers, and
|
|
- Digipeater in simplex or split-frequency environment.
|
|
|
|
In all configurations the display shows the current stationMode, heard packets and events the iGate is currently performing.
|
|
|
|
But under the hood is much more:
|
|
|
|
- Sending events to remote syslog server.
|
|
- OTA update capability (for Firmware and Filesystem).
|
|
- RX first, TX will only be done if there is no traffic on the frequency.
|
|
- automatic update of the Lora symbol at APRS-IS, black "L" for pure RX, red "L" for TX capability, green star "L" for digipeater and blue round "L" for WX iGate.
|
|
- support for multiple WLAN with corresponding coordinates.
|
|
- support for BME280 sensors, sending to WX data to APRS-IS.
|
|
|
|
and more will come:
|
|
- Web-UI
|
|
- ...
|
|
|
|
__________________________________________
|
|
|
|
See also the software for LoRa Tracker https://github.com/richonguzman/LoRa_APRS_Tracker
|
|
|
|
__________________________________________
|
|
|
|
|
|
Instructions (add your information into the '/data/igate_conf.json'):
|
|
|
|
a) Change _callsign_ from "NOCALL-10" to your CALLSIGN + SSID.
|
|
|
|
b) Choose _stationMode_:
|
|
|
|
1 = RX iGate, black "L" as symbol
|
|
|
|
2 = Rx + TX iGate, red "L" as symbol, HAM only. RX will be sent to APRS-IS, Messages will be sent via Lora. Same frequency for RX and TX. By using this feature you have comply with the regulations of your country.
|
|
|
|
3 = Digipeater simplex, green "L" as symbol, HAM only. Received packets containing WIDEx-x in path will be digipeated on the same frequency. By using this feature you have comply with the regulations of your country.
|
|
|
|
4 = Digipeater split frequency, green "L" as symbol, HAM only. Received packets will be digipeated on a different frequency. Frequency separation must be 125kHz or more. By using this feature you have comply with the regulations of your country.
|
|
|
|
IgateComment and DigirepeaterComment will be sent to APRS-IS or via RF, depending on your stationmode
|
|
|
|
c) WiFi section:
|
|
|
|
adjust SSID and Password to you WiFi, add the GPS to "Latitude" and "Longitude" (info from GoogleMaps) of your new LoRa iGate. (If stationMode 3 or 4 selected, add also GPS info to Digirepeater Section).
|
|
|
|
d) APRS_IS section:
|
|
|
|
change "passcode" from "VWXYZ" to yours (remember that is 5 digits integer) and choose a server close to your location (see https://www.aprs2.net/)
|
|
|
|
e) LORA section:
|
|
|
|
adjust TX frequency and RX frequency matching your stationmode and country. Remember,
|
|
|
|
at stationmode 1, 2, and 3, RX and TX frequency shall be set to 433775000 (443.775MHz, deviations possible, depending on your country)
|
|
|
|
at stationmode 4, RX frequency shall be set to 433775000, TX frequency shall be set to 433900000 (deviations possible, depending on your country). There must be a frequency separation of 125kHz or more.
|
|
|
|
adjust power to your need, valid values are from 1 to 20
|
|
|
|
f) Syslog section:
|
|
|
|
adjust server and port to a suitable value if needed.
|
|
|
|
g) BME section:
|
|
|
|
adjust to "active" if BME280 sensor connected through I2C pins
|
|
|
|
__________________________________________
|
|
|
|
LoRa APRS iGATE/Digirepeater working on this boards:
|
|
- LILYGO ESP32 LoRa32 v2-1-1.6 and T3
|
|
- ESP32 Wroom + SX1278 LoRa Module for a DIY Version.
|
|
- HELTEC_WIFI_LORA_32_V2 (check "pins_config.h" and "display.cpp" for aditional configuration).
|
|
__________________________________________
|
|
Versions:
|
|
- 2023.02.10 First Beta (receiving LoRa Beacon/Packets and uploading to APRS-IS).
|
|
- 2023.02.17 Receiving Feed from APRS-IS.
|
|
- 2023.03.01 Tx Packet from APRS-IS to nearby LoRa Stations.
|
|
- 2023.05.12 Tx Packet from APRS-IS to LoRa-RF Correction.
|
|
- 2023.05.19 Saving Last-Heard Stations for validating Tx Responses.
|
|
- 2023.05.23 Processing Query's from RF/LoRa or APRS-IS (Send "Help" Message to test).
|
|
- 2023.06.06 Full repack of Code and adding _enableTx_ only for Ham Ops.
|
|
- 2023.06.08 Adding Digirepeater Functions.
|
|
- 2023.06.10 OTA update support for Firmware and Filesystem.
|
|
- 2023.06.12 Syslog added.
|
|
- 2023.06.17 Support for BME280 Module (Temperature, Humidity, Pressure) added.
|
|
- 2023.06.18 Info on Oled Screen mayor update, added RSSI and Distance to Listened Station.
|
|
- 2023.07.05 Adding monitor info of Battery connected.
|
|
- 2023.07.16 Small OTA, BME module update.
|
|
- 2023.07.31 StationMode5 added: iGate when WiFi and APRS available, DigiRepeater when not.
|
|
- 2023.08.05 Ground Height Correction for Pressure readings added
|
|
|
|
__________________________________________
|
|
|
|
Special Thanks to the help in testing and developing to Manfred (DC2MH) , for showing me the "way of good coding" to Tihomir (CA3TSK) and much more Ham Licence Ops all over the world.
|
|
|
|
# Hope You Enjoy this, 73 !! CD2RXU , Valparaiso, Chile |