mirror of
https://github.com/meshcore-dev/meshcore-cli.git
synced 2026-04-20 22:13:48 +00:00
211 lines
7.5 KiB
Markdown
211 lines
7.5 KiB
Markdown
# meshcore-cli
|
|
|
|
meshcore-cli : CLI interface to MeschCore companion app over BLE, TCP or Serial
|
|
|
|
## Install
|
|
|
|
Meshcore-cli depends on the [python meshcore](https://github.com/fdlamotte/meshcore_py) package. You can install both via `pip` or `pipx` using the command :
|
|
|
|
<pre>
|
|
$ pipx install meshcore-cli
|
|
</pre>
|
|
|
|
It will install you `meshcore-cli` and `meshcli`, which is an alias to the former.
|
|
|
|
If you want meshcore-cli to remember last BLE device, you should have some `$HOME/.config/meshcore` where configuration for meschcore-cli will be stored (if not it will use first device it finds).
|
|
|
|
## Usage
|
|
|
|
<pre>
|
|
$ meshcli <args> <commands>
|
|
</pre>
|
|
|
|
If using BLE, don't forget to pair your device first (using `bluetoothctl` for instance on Linux) or meshcli won't be able to communicate.
|
|
|
|
### Arguments
|
|
|
|
Arguments mostly deals with ble connection
|
|
|
|
<pre>
|
|
-h : prints this help
|
|
-j : json output
|
|
-a <address> : specifies device address (can be a name)
|
|
-d <name> : filter meshcore devices with name or address
|
|
-t <hostname> : connects via tcp/ip
|
|
-p <port> : specifies tcp port (default 5000)
|
|
-s <port> : use serial port <port>
|
|
-b <baudrate> : specify baudrate
|
|
</pre>
|
|
|
|
### Available Commands
|
|
|
|
Commands are given after arguments, they can be chained and some have shortcuts. Also prefixing a command with a dot ```.``` will force it to output json instead of synthetic result.
|
|
|
|
<pre>
|
|
General commands
|
|
chat : enter the chat (interactive) mode
|
|
chat_to <ct> : enter chat with contact to
|
|
infos : print informations about the node i
|
|
card : export this node URI e
|
|
ver : firmware version v
|
|
reboot : reboots node
|
|
sleep <secs> : sleeps for a given amount of secs s
|
|
Messenging
|
|
msg <name> <msg> : send message to node by name m {
|
|
wait_ack : wait an ack wa }
|
|
chan <nb> <msg> : send message to channel number <nb> ch
|
|
public : send message to public channel (0) dch
|
|
recv : reads next msg r
|
|
sync_msgs : gets all unread msgs from the node sm
|
|
wait_msg : wait for a message and read it wm
|
|
Management
|
|
advert : sends advert a
|
|
floodadv : flood advert
|
|
get <param> : gets a param, \"get help\" for more
|
|
set <param> <value> : sets a param, \"set help\" for more
|
|
time <epoch> : sets time to given epoch
|
|
clock : get current time
|
|
clock sync : sync device clock st
|
|
cli : send a cmd to node's cli (if avail) @
|
|
Contacts
|
|
contacts / list : gets contact list lc
|
|
share_contact <ct> : share a contact with others sc
|
|
export_contact <ct> : get a contact's URI ec
|
|
remove_contact <ct> : removes a contact from this node
|
|
reset_path <ct> : resets path to a contact to flood rp
|
|
change_path <ct> <pth> : change the path to a contact cp
|
|
Repeaters
|
|
login <name> <pwd> : log into a node (rep) with given pwd l [[
|
|
wait_login : wait for login (timeouts after 5sec) wl ]]
|
|
cmd <name> <cmd> : sends a command to a repeater (no ack) c [
|
|
wmt8 : wait for a msg (reply) with a timeout ]
|
|
req_status <name> : requests status from a node rs
|
|
wait_status : wait and print reply ws
|
|
</pre>
|
|
|
|
### Examples
|
|
|
|
<pre>
|
|
# gets info from first ble MC device it finds (was -s but now used for serial port)
|
|
$ meshcore-cli -d "" infos
|
|
INFO:meshcore:Scanning for devices
|
|
INFO:meshcore:Found device : C2:2B:A1:D5:3E:B6: MeshCore-t114_fdl
|
|
INFO:meshcore:BLE Connection started
|
|
{
|
|
"adv_type": 1,
|
|
"tx_power": 22,
|
|
"max_tx_power": 22,
|
|
"public_key": "993acd42fc779962c68c627829b32b111fa27a67d86b75c17460ff48c3102db4",
|
|
"adv_lat": 47.794,
|
|
"adv_lon": -3.428,
|
|
"radio_freq": 869.525,
|
|
"radio_bw": 250.0,
|
|
"radio_sf": 11,
|
|
"radio_cr": 5,
|
|
"name": "t114_fdl"
|
|
}
|
|
|
|
# getting time
|
|
$ meshcli -a C2:2B:A1:D5:3E:B6 clock
|
|
INFO:meshcore:BLE Connection started
|
|
Current time : 2025-04-18 08:19:26 (1744957166)
|
|
|
|
# If you're familiar with meshcli, you should have noted that
|
|
# now output is not json only, to get json output, use -j
|
|
# or prefix your commands with a dot
|
|
$ meshcli -a C2:2B:A1:D5:3E:B6 .clock
|
|
INFO:meshcore:BLE Connection started
|
|
{
|
|
"time": 1744957249
|
|
}
|
|
|
|
# Using -j, meshcli will return a json array of replies ...
|
|
$ meshcli -j -a C2:2B:A1:D5:3E:B6 clock
|
|
[
|
|
{
|
|
"time": 1744957261
|
|
}
|
|
]
|
|
|
|
# So if I reboot the node, and want to set time, I can chain the commands
|
|
# and get that kind of output (even better by feeding it to jq)
|
|
$ meshcli reboot
|
|
INFO:meshcore:BLE Connection started
|
|
$ meshcli -j clock clock sync clock | jq
|
|
[
|
|
{
|
|
"time": 1715770360
|
|
},
|
|
{},
|
|
{
|
|
"time": 1744957460
|
|
}
|
|
]
|
|
# Now check if time is ok with human output (I don't read epoch time yet)
|
|
$ meshcli clock
|
|
INFO:meshcore:BLE Connection started
|
|
Current time : 2025-04-18 08:26:25 (1744957585)
|
|
|
|
# Now you'll probably want to send some messages ...
|
|
# For that, there is the msg command, wait_ack
|
|
$ meshcli msg Techo_fdl "Hello T-Echo" wa
|
|
INFO:meshcore:BLE Connection started
|
|
Msg acked
|
|
|
|
# I can check the message on the techo
|
|
$ meshcli -d Techo sm
|
|
INFO:meshcore:Scanning for devices
|
|
INFO:meshcore:Found device : DE:B6:D0:68:D5:62: MeshCore-Techo_fdl
|
|
INFO:meshcore:BLE Connection started
|
|
t114_fdl(0): Hello T-Echo
|
|
|
|
# And reply using json output for more verbosity
|
|
[
|
|
{
|
|
"type": 0,
|
|
"expected_ack": "83059275",
|
|
"suggested_timeout": 4446
|
|
},
|
|
{
|
|
"code": "83059275"
|
|
}
|
|
]
|
|
|
|
# But this could have been done easier using the chat mode
|
|
# Here from the techo side. Note that un-acked messages will be
|
|
# signaled with an ! at the start of the prompt
|
|
$ meshcli chat
|
|
INFO:meshcore:BLE Connection started
|
|
Interactive mode, most commands from terminal chat should work.
|
|
Use "to" to selects contact, "list" to list contacts, "send" to send a message ...
|
|
Line starting with "$" or "." will issue a meshcli command.
|
|
"quit" or "q" will end interactive mode
|
|
t114_fdl(D): Hello T-Echo
|
|
EnsibsRoom> Hi
|
|
!EnsibsRoom> to t114_fdl
|
|
t114_fdl> Hi
|
|
t114_fdl(D): It took you long to reply ...
|
|
t114_fdl> I forgot to set the recipient with the to command
|
|
t114_fdl(D): It happens ...
|
|
t114_fdl>
|
|
|
|
# Loging into repeaters and sending commands is also possible
|
|
# directly from the chat, because we can use meshcli commands ;)
|
|
$ meshcli chat (pending msgs are shown at connexion ...)
|
|
INFO:meshcore:BLE Connection started
|
|
Interactive mode, most commands from terminal chat should work.
|
|
Use "to" to selects contact, "list" to list contacts, "send" to send a message ...
|
|
Line starting with "$" or "." will issue a meshcli command.
|
|
"quit" or "q" will end interactive mode
|
|
Techo_fdl(0): Cool to receive some msgs from you
|
|
Techo_fdl(D): Hi
|
|
Techo_fdl(D): I forgot to set the recipient with the to command
|
|
FdlRoom> $login FdlRoom password wl
|
|
Login success
|
|
FdlRoom> $cmd FdlRoom clock
|
|
FdlRoom(0): 06:40 - 18/4/2025 UTC
|
|
FdlRoom>
|
|
</pre>
|
|
|
|
|
|
|