Wessel Nieboer 329e408197 Hold GC1109 PA_POWER during deep sleep for LNA RX wake ... The GC1109 FEM needs its VFEM_Ctrl pin held HIGH during deep sleep to keep the LNA active, enabling proper RX sensitivity for wake-on-packet. Without this, the LNA is unpowered during sleep and RX wake sensitivity is degraded by ~17dB. Release RTC holds in begin() after configuring GPIO registers (not before) to ensure glitch-free pin transitions on wake. Trade-off: ~6.5mA additional sleep current for significantly improved wake-on-packet range.		2026-02-28 19:05:31 +01:00
..
HeltecV4Board.cpp	Hold GC1109 PA_POWER during deep sleep for LNA RX wake	2026-02-28 19:05:31 +01:00
HeltecV4Board.h	add heltec_v4 board.	2025-09-22 19:58:27 +08:00
pins_arduino.h	add heltec_v4 board.	2025-09-22 19:58:27 +08:00
platformio.ini	Reverted to use GPIO 17, 18 as I2C for Heltec v4 repeater	2026-02-18 22:38:24 +07:00
target.cpp	Disabled periph_power for Heltec v4's display	2026-02-18 22:32:01 +07:00
target.h	Allow negative tx power	2026-02-06 02:24:51 +01:00