* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
The companion_radio example was not restoring the GPS enabled/disabled
preference from flash after reboot. The preference was being saved
correctly when toggled via the mobile app, but on boot,
sensors.begin() -> initBasicGPS() unconditionally sets gps_active=false
and nothing subsequently restored the persisted state.
Added applyGpsPrefs() (matching the pattern in simple_repeater,
simple_sensor, and simple_room_server) and call it from main.cpp
after sensors.begin() to ensure the GPS hardware is initialized
before the saved preference is applied.
Adds a LEDManager class (src/helpers/ui/LEDManager.h) that centralizes
all LED control into one component with begin()/loop() lifecycle and
per-pin active-HIGH/LOW polarity support.
LED settings are exposed as custom vars (led.status, led.activity)
accessible via companion radio binary protocol, CLI set/get commands,
and the SensorManager settings interface.
Status LED modes: off, boot-30s, slow blink (200ms/4s), always on.
Activity LED modes: off, BLE only, LoRa TX only, BLE + LoRa TX.
Integrated into 23 board variants, replacing scattered hardcoded
digitalWrite calls in onBeforeTransmit/onAfterTransmit/powerOff.
- Change > to >= so stored value 1 means direct/0-hop only (liamcottle)
- Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl)
- Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Filter auto-add of new contacts by hop count (issues #1533, #1546).
Setting is configurable from the companion app via extended
CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.
This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
