Kenneth Privitt
973dde078e
Backoff-Defaults: enable collison avoidance
2026-04-14 17:25:58 -07:00
Wessel Nieboer
0a13ac7fc7
Default button polarity to active-LOW across all firmware types
...
Nearly all LoRa boards use a boot button that pulls to ground when
pressed.
2026-04-04 13:19:13 +02:00
terminalvelocity23
08de3fb01f
Make sendNodeDiscoverReq() public for post-boot discovery
2026-03-30 22:35:05 +03:00
Scott Powell
467959cc3b
* version 1.14.1
2026-03-20 12:32:41 +11:00
João Brázio
92bef49c55
Merge branch 'dev' into 2026/remote-lna
2026-03-16 09:40:10 +00:00
João Brázio
274e00df50
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-16 09:37:55 +00:00
Scott Powell
fcfdc5fc5b
* Repeater and Room Server: flood advert timer now uses the path_hash_mode pref
2026-03-16 13:56:19 +11:00
Scott Powell
bb8dc5b55b
Merge branch 'main' into dev
2026-03-12 18:14:56 +11:00
ripplebiz
792f299986
Merge pull request #1873 from Specter242/codex/sensecap-solar-led-poweroff-parity
...
sensecap solar: add poweroff/shutdown support and nrf52 PM parity
2026-03-12 18:13:14 +11:00
ripplebiz
cf0cc851d4
Merge pull request #1297 from ViezeVingertjes/feature/duty-cycle-token-bucket
...
Implement token bucket duty cycle enforcement
2026-03-08 23:54:32 +11:00
ripplebiz
29be7e293c
Merge pull request #1877 from DanielNovak/fix-countbefore-sentinel-regression
...
Fix countBefore regression: replace sentinel with getOutboundTotal()
2026-03-07 18:48:02 +11:00
Scott Powell
3fe2dd7f48
* ver 1.14.0
2026-03-06 12:20:04 +11:00
João Brázio
3e7fb4add1
Add setRxBoostedGain method declaration and implementation for SX1262/SX1268
2026-03-05 18:48:40 +00:00
João Brázio
9a95e25ef2
Remove unused RX boosted gain mode functions and related preprocessor directives across multiple variants
2026-03-05 18:38:57 +00:00
João Brázio
f858f2e4bb
Rename sx126x_rx_boosted_gain to rx_boosted_gain
2026-03-05 18:14:47 +00:00
João Brázio
8df87d5609
Merge remote-tracking branch 'upstream/dev' into 2026/remote-lna
2026-03-05 17:21:38 +00:00
Scott Powell
5684b4f1b8
* LOOP_DETECT_MODERATE bug fix
2026-03-05 17:38:51 +11:00
Scott Powell
e233346bf0
* repeater: new "get/set loop.detect {off | minimal | moderate | strict }"
2026-03-05 16:26:09 +11:00
Daniel Novak
c7568a8db0
Replace 0xFFFFFFFF sentinel with explicit getOutboundTotal()
...
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.
This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
2026-02-28 17:19:04 +01:00
Specter242
e08dcbdd03
sensecap solar: stabilize wake pin and add button hold poweroff
2026-02-27 22:51:19 -05:00
João Brázio
64a16d7ad2
Merge branch 'dev' into 2026/remote-lna
2026-02-27 10:32:14 +00:00
Scott Powell
a66773bac0
* CommonCLI: added "get/set path.hash.mode "
2026-02-23 14:25:19 +11:00
Scott Powell
3e76161e9c
* refactor of Contact/Client out_path_len (stored in files), from signed to unsigned byte (+2 squashed commits)
...
Squashed commits:
[f326e25] * misc
[fa5152e] * new 'path mode' parsing in Dispatcher
2026-02-21 19:35:51 +11:00
Liam Cottle
bbc5f0c11a
Merge pull request #1718 from realtag-github/repeater-v1.13-implement-discover
...
discover sends a single repeater discovery request and populates the neighbor list; self is excluded
2026-02-17 23:53:28 +13:00
Scott Powell
5de3e1bf32
* repeater: slight increase to default direct.txdelay
2026-02-17 20:10:13 +11:00
3DPGG
3e53df5082
Fix LilyGo_TLora_V2_1_1_6_terminal_chat build
...
This change addresses two issues. The first is that the
LilyGo_TLora_V2_1_1_6_terminal_chat build would try to compile
simple_repeater/MyMesh.cpp. All other examples of terminal chat
targets are instead building simple_secure_chat/main.cpp . This
change would align this build to the rest of the builds.
The second issue, found during the course of investigating the
first, stems from simple_repeater/MyMesh.cpp using the
MAX_NEIGHBOURS #define to control whether the neighbor list is kept.
Repeaters that keep this list must define this value, and if the
value is not defined, then all neighbor-related functionality is
compiled out. However, the code that replies to
REQ_TYPE_GET_NEIGHBOURS did not properly check for this #define,
and thus any target that compiles simple_repeater/MyMesh.cpp
without defining MAX_NEIGHBOURS would get an undefined variable
compilation error.
As a practical matter though, there are no targets that compile
simple_repeater/MyMesh.cpp AND do not define MAX_NEIGHBOURS,
except this build due to the first issue. As a result, the
second issue is addressed only as a matter of completeness. The
expected behavior with this change is that such a repeater would
send a valid reply indicating zero known neighbors.
2026-02-16 18:10:29 -08:00
realtag
0770618ee2
Allow repeater discovery even if repeater mode is disabled on the requesting repeater.
2026-02-17 01:39:04 +00:00
realtag
bf9c6cb50f
Increased the timeout timer to 60 seconds, up from 30 seconds.
2026-02-17 01:22:17 +00:00
realtag
87c78a98bd
discover.neighbors sends a tagged repeater discovery request and only accepts matching repeater responses
2026-02-17 01:04:14 +00:00
realtag
e8785dd9b0
discover sends a single repeater discovery request and populates the neighbor list; self is excluded
2026-02-17 00:41:24 +00:00
Scott Powell
e2571accbe
* ver 1.13.0
2026-02-15 17:24:37 +11:00
João Brázio
71136671bd
Implement remote lna toggle cli cmd
2026-02-10 15:02:23 +00:00
ripplebiz
f6fc05601c
Merge pull request #1609 from weebl2000/bridge-always-has-work
...
Bridge always has work (prevents sleep)
2026-02-08 22:42:05 +11:00
Liam Cottle
10eacc4e95
Merge pull request #1316 from weebl2000/allow-negative-tx
...
Allow negative tx
2026-02-08 12:43:10 +13:00
Wessel Nieboer
c4c287d01b
Bridge always has work (prevents sleep)
2026-02-07 15:39:24 +01:00
Wessel Nieboer
d0720c63c2
Allow negative tx power
...
Like SX1262 allows -9 dBm lowest, some allow lower but that probably
isn't useful
2026-02-06 02:24:51 +01:00
João Brázio
18473333df
Merge remote-tracking branch 'upstream/dev' into 2026/t114-sensors
2026-02-05 13:36:22 +00:00
João Brázio
5cb26b91f6
Refactor Heltec T114 sensor management
2026-02-05 13:35:04 +00:00
taco
a342ab8437
nrf52: allow repeater to sleep when idle
2026-02-01 14:51:27 +11:00
Scott Powell
465776d667
* ver 1.12.0
2026-01-29 21:12:31 +11:00
ripplebiz
d81616ec68
Merge pull request #1476 from mattzzw/region_via_LoRa
...
Add cli command `region list {allowed|denied}`, enable output of region cmd via remote cli
2026-01-27 11:07:22 +11:00
Matthias Wientapper
0805a47f35
Add output of region cmd via lora cli
...
Add cli commands "region list {allowed|denied}"
2026-01-26 17:44:43 +01:00
liamcottle
d13bc446de
added build flag to enable/disable boot advert
2026-01-26 22:39:39 +13:00
liamcottle
ed589f9620
boot adverts are now zero hop instead of flood
2026-01-26 22:20:36 +13:00
ripplebiz
4b7684c7df
Merge pull request #1477 from Cisien/dev
...
Expose a counter to track RadioLib receive errors
2026-01-26 19:04:48 +11:00
Chris
c16bcd2fe3
Expose a counter to track RadioLib receive errors
...
This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).
2026-01-24 20:06:29 -08:00
taco
96ef5e5efe
allow set prv.key from remote, validate new prv.key
2026-01-25 01:32:48 +11:00
taco
988287bfd7
recalc ClientACL shared_secrets at startup
2026-01-25 01:32:44 +11:00
taco
6336bd5b72
refactor ClientACL and CommonCLI, add ClientACL::clear()
2026-01-25 01:31:53 +11:00
Scott Powell
69a71d0e25
* repeater login response, FIRMWARE_VER_LEVEL now bumped to 2
2026-01-12 17:47:51 +11:00
