Implement remote lna toggle cli cmd

examples/simple_repeater/MyMesh.cpp

@@ -801,6 +801,14 @@ MyMesh::MyMesh(mesh::MainBoard &board, mesh::Radio &radio, mesh::MillisecondCloc
   _prefs.advert_loc_policy = ADVERT_LOC_PREFS;
 
   _prefs.adc_multiplier = 0.0f; // 0.0f means use default board multiplier
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+#ifdef SX126X_RX_BOOSTED_GAIN
+  _prefs.sx126x_rx_boosted_gain = SX126X_RX_BOOSTED_GAIN;
+#else
+  _prefs.sx126x_rx_boosted_gain = 1; // enabled by default;
+#endif
+#endif
 }
 
 void MyMesh::begin(FILESYSTEM *fs) {
@@ -821,6 +829,12 @@ void MyMesh::begin(FILESYSTEM *fs) {
   radio_set_params(_prefs.freq, _prefs.bw, _prefs.sf, _prefs.cr);
   radio_set_tx_power(_prefs.tx_power_dbm);
 
+#if defined(USE_SX1262) || defined(USE_SX1268)
+  radio_set_rx_boosted_gain_mode(_prefs.sx126x_rx_boosted_gain);
+  MESH_DEBUG_PRINTLN("SX126x RX Boosted Gain Mode: %s",
+                     radio_get_rx_boosted_gain_mode() ? "Enabled" : "Disabled");
+#endif
+
   updateAdvertTimer();
   updateFloodAdvertTimer();
 

examples/simple_repeater/MyMesh.h

@@ -234,4 +234,10 @@ public:
 
   // To check if there is pending work
   bool hasPendingWork() const;
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+  void setRxBoostedGain(bool enable) override {
+    radio_set_rx_boosted_gain_mode(enable);
+  }
+#endif
 };

src/helpers/CommonCLI.cpp

@@ -51,19 +51,20 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     file.read((uint8_t *)&_prefs->tx_power_dbm, sizeof(_prefs->tx_power_dbm));        // 76
     file.read((uint8_t *)&_prefs->disable_fwd, sizeof(_prefs->disable_fwd));          // 77
     file.read((uint8_t *)&_prefs->advert_interval, sizeof(_prefs->advert_interval));  // 78
-    file.read((uint8_t *)pad, 1);                                                     // 79  was 'unused'
+    file.read((uint8_t *)pad, 1); // 79 : 1 byte unused
     file.read((uint8_t *)&_prefs->rx_delay_base, sizeof(_prefs->rx_delay_base));      // 80
     file.read((uint8_t *)&_prefs->tx_delay_factor, sizeof(_prefs->tx_delay_factor));  // 84
     file.read((uint8_t *)&_prefs->guest_password[0], sizeof(_prefs->guest_password)); // 88
     file.read((uint8_t *)&_prefs->direct_tx_delay_factor, sizeof(_prefs->direct_tx_delay_factor)); // 104
-    file.read(pad, 4);                                                                             // 108
+    file.read(pad, 4); // 108 : 4 bytes unused
     file.read((uint8_t *)&_prefs->sf, sizeof(_prefs->sf));                                         // 112
     file.read((uint8_t *)&_prefs->cr, sizeof(_prefs->cr));                                         // 113
     file.read((uint8_t *)&_prefs->allow_read_only, sizeof(_prefs->allow_read_only));               // 114
     file.read((uint8_t *)&_prefs->multi_acks, sizeof(_prefs->multi_acks));                         // 115
     file.read((uint8_t *)&_prefs->bw, sizeof(_prefs->bw));                                         // 116
     file.read((uint8_t *)&_prefs->agc_reset_interval, sizeof(_prefs->agc_reset_interval));         // 120
-    file.read(pad, 3);                                                                             // 121
+    file.read((uint8_t *)&_prefs->sx126x_rx_boosted_gain, sizeof(_prefs->sx126x_rx_boosted_gain)); // 121
+    file.read(pad, 2); // 122 : 2 byte unused
     file.read((uint8_t *)&_prefs->flood_max, sizeof(_prefs->flood_max));                           // 124
     file.read((uint8_t *)&_prefs->flood_advert_interval, sizeof(_prefs->flood_advert_interval));   // 125
     file.read((uint8_t *)&_prefs->interference_threshold, sizeof(_prefs->interference_threshold)); // 126
@@ -79,9 +80,9 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     file.read((uint8_t *)&_prefs->gps_interval, sizeof(_prefs->gps_interval));                     // 157
     file.read((uint8_t *)&_prefs->advert_loc_policy, sizeof (_prefs->advert_loc_policy));          // 161
     file.read((uint8_t *)&_prefs->discovery_mod_timestamp, sizeof(_prefs->discovery_mod_timestamp)); // 162
-    file.read((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier)); // 166
-    file.read((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));  // 170
-    // 290
+    file.read((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier));                 // 166
+    file.read((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));                          // 170
+    // next: 290
 
     // sanitise bad pref values
     _prefs->rx_delay_base = constrain(_prefs->rx_delay_base, 0, 20.0f);
@@ -108,6 +109,9 @@ void CommonCLI::loadPrefsInt(FILESYSTEM* fs, const char* filename) {
     _prefs->gps_enabled = constrain(_prefs->gps_enabled, 0, 1);
     _prefs->advert_loc_policy = constrain(_prefs->advert_loc_policy, 0, 2);
 
+    // sanitise settings
+    _prefs->sx126x_rx_boosted_gain = constrain(_prefs->sx126x_rx_boosted_gain, 0, 1); // boolean
+
     file.close();
   }
 }
@@ -135,19 +139,20 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
     file.write((uint8_t *)&_prefs->tx_power_dbm, sizeof(_prefs->tx_power_dbm));        // 76
     file.write((uint8_t *)&_prefs->disable_fwd, sizeof(_prefs->disable_fwd));          // 77
     file.write((uint8_t *)&_prefs->advert_interval, sizeof(_prefs->advert_interval));  // 78
-    file.write((uint8_t *)pad, 1);                                                     // 79  was 'unused'
+    file.write((uint8_t *)pad, 1); // 79 : 1 byte unused
     file.write((uint8_t *)&_prefs->rx_delay_base, sizeof(_prefs->rx_delay_base));      // 80
     file.write((uint8_t *)&_prefs->tx_delay_factor, sizeof(_prefs->tx_delay_factor));  // 84
     file.write((uint8_t *)&_prefs->guest_password[0], sizeof(_prefs->guest_password)); // 88
     file.write((uint8_t *)&_prefs->direct_tx_delay_factor, sizeof(_prefs->direct_tx_delay_factor)); // 104
-    file.write(pad, 4);                                                                             // 108
+    file.write(pad, 4); // 108 : 4 byte unused
     file.write((uint8_t *)&_prefs->sf, sizeof(_prefs->sf));                                         // 112
     file.write((uint8_t *)&_prefs->cr, sizeof(_prefs->cr));                                         // 113
     file.write((uint8_t *)&_prefs->allow_read_only, sizeof(_prefs->allow_read_only));               // 114
     file.write((uint8_t *)&_prefs->multi_acks, sizeof(_prefs->multi_acks));                         // 115
     file.write((uint8_t *)&_prefs->bw, sizeof(_prefs->bw));                                         // 116
     file.write((uint8_t *)&_prefs->agc_reset_interval, sizeof(_prefs->agc_reset_interval));         // 120
-    file.write(pad, 3);                                                                             // 121
+    file.write((uint8_t *)&_prefs->sx126x_rx_boosted_gain, sizeof(_prefs->sx126x_rx_boosted_gain)); // 121
+    file.write(pad, 2); // 122 : 2 byte unused
     file.write((uint8_t *)&_prefs->flood_max, sizeof(_prefs->flood_max));                           // 124
     file.write((uint8_t *)&_prefs->flood_advert_interval, sizeof(_prefs->flood_advert_interval));   // 125
     file.write((uint8_t *)&_prefs->interference_threshold, sizeof(_prefs->interference_threshold)); // 126
@@ -164,8 +169,8 @@ void CommonCLI::savePrefs(FILESYSTEM* fs) {
     file.write((uint8_t *)&_prefs->advert_loc_policy, sizeof(_prefs->advert_loc_policy));           // 161
     file.write((uint8_t *)&_prefs->discovery_mod_timestamp, sizeof(_prefs->discovery_mod_timestamp)); // 162
     file.write((uint8_t *)&_prefs->adc_multiplier, sizeof(_prefs->adc_multiplier));                 // 166
-    file.write((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));  // 170
-    // 290
+    file.write((uint8_t *)_prefs->owner_info, sizeof(_prefs->owner_info));                          // 170
+    // next: 290
 
     file.close();
   }
@@ -303,6 +308,10 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         sprintf(reply, "> %s", StrHelper::ftoa(_prefs->node_lat));
       } else if (memcmp(config, "lon", 3) == 0) {
         sprintf(reply, "> %s", StrHelper::ftoa(_prefs->node_lon));
+#if defined(USE_SX1262) || defined(USE_SX1268)
+      } else if (memcmp(config, "radio.lna", 9) == 0) {
+        sprintf(reply, "> %s", _prefs->sx126x_rx_boosted_gain ? "on" : "off");
+#endif
       } else if (memcmp(config, "radio", 5) == 0) {
         char freq[16], bw[16];
         strcpy(freq, StrHelper::ftoa(_prefs->freq));
@@ -473,6 +482,13 @@ void CommonCLI::handleCommand(uint32_t sender_timestamp, const char* command, ch
         _prefs->disable_fwd = memcmp(&config[7], "off", 3) == 0;
         savePrefs();
         strcpy(reply, _prefs->disable_fwd ? "OK - repeat is now OFF" : "OK - repeat is now ON");
+#if defined(USE_SX1262) || defined(USE_SX1268)
+      } else if (memcmp(config, "radio.lna ", 10) == 0) {
+        _prefs->sx126x_rx_boosted_gain = memcmp(&config[10], "on", 2) == 0;
+        strcpy(reply, "OK");
+        savePrefs();
+        _callbacks->setRxBoostedGain(_prefs->sx126x_rx_boosted_gain);
+#endif
       } else if (memcmp(config, "radio ", 6) == 0) {
         strcpy(tmp, &config[6]);
         const char *parts[4];

src/helpers/CommonCLI.h

@@ -52,6 +52,8 @@ struct NodePrefs { // persisted to file
   uint32_t discovery_mod_timestamp;
   float adc_multiplier;
   char owner_info[120];
+  // Power settings
+  uint8_t sx126x_rx_boosted_gain;
 };
 
 class CommonCLICallbacks {
@@ -87,6 +89,10 @@ public:
   virtual void restartBridge() {
     // no op by default
   };
+
+  virtual void setRxBoostedGain(bool enable) {
+    // no op by default
+  };
 };
 
 class CommonCLI {

src/helpers/radiolib/CustomSX1262.h

@@ -2,7 +2,7 @@
 
 #include <RadioLib.h>
 
-#define SX126X_IRQ_HEADER_VALID                     0b0000010000  //  4     4     valid LoRa header received
+#define SX126X_IRQ_HEADER_VALID                0b0000010000  //  4     4     valid LoRa header received
 #define SX126X_IRQ_PREAMBLE_DETECTED           0x04
 
 class CustomSX1262 : public SX1262 {
@@ -92,4 +92,10 @@ class CustomSX1262 : public SX1262 {
       bool detected = (irq & SX126X_IRQ_HEADER_VALID) || (irq & SX126X_IRQ_PREAMBLE_DETECTED);
       return detected;
     }
+
+    uint8_t getRxBoostedGainMode() {
+      uint8_t rxGain = 0;
+      readRegister(RADIOLIB_SX126X_REG_RX_GAIN, &rxGain, 1);
+      return rxGain;
+    }
 };

src/helpers/radiolib/CustomSX1262Wrapper.h

@@ -3,6 +3,10 @@
 #include "CustomSX1262.h"
 #include "RadioLibWrappers.h"
 
+#ifndef USE_SX1262
+#define USE_SX1262
+#endif
+
 class CustomSX1262Wrapper : public RadioLibWrapper {
 public:
   CustomSX1262Wrapper(CustomSX1262& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }

src/helpers/radiolib/CustomSX1268.h

@@ -2,7 +2,7 @@
 
 #include <RadioLib.h>
 
-#define SX126X_IRQ_HEADER_VALID                     0b0000010000  //  4     4     valid LoRa header received
+#define SX126X_IRQ_HEADER_VALID                0b0000010000  //  4     4     valid LoRa header received
 #define SX126X_IRQ_PREAMBLE_DETECTED           0x04
 
 class CustomSX1268 : public SX1268 {
@@ -84,4 +84,10 @@ class CustomSX1268 : public SX1268 {
       bool detected = (irq & SX126X_IRQ_HEADER_VALID) || (irq & SX126X_IRQ_PREAMBLE_DETECTED);
       return detected;
     }
+
+    uint8_t getRxBoostedGainMode() {
+      uint8_t rxGain = 0;
+      readRegister(RADIOLIB_SX126X_REG_RX_GAIN, &rxGain, 1);
+      return rxGain;
+    }
 };

src/helpers/radiolib/CustomSX1268Wrapper.h

@@ -3,6 +3,10 @@
 #include "CustomSX1268.h"
 #include "RadioLibWrappers.h"
 
+#ifndef USE_SX1268
+#define USE_SX1268
+#endif
+
 class CustomSX1268Wrapper : public RadioLibWrapper {
 public:
   CustomSX1268Wrapper(CustomSX1268& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }

src/helpers/radiolib/CustomSX1276Wrapper.h

@@ -3,6 +3,10 @@
 #include "CustomSX1276.h"
 #include "RadioLibWrappers.h"
 
+#ifndef USE_SX1276
+#define USE_SX1276
+#endif
+
 class CustomSX1276Wrapper : public RadioLibWrapper {
 public:
   CustomSX1276Wrapper(CustomSX1276& radio, mesh::MainBoard& board) : RadioLibWrapper(radio, board) { }

variants/ebyte_eora_s3/platformio.ini

@@ -30,6 +30,7 @@ build_flags =
   -D SX126X_DIO2_AS_RF_SWITCH=true
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
   -D SX126X_CURRENT_LIMIT=140
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/ebyte_eora_s3/target.cpp

@@ -83,3 +83,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/ebyte_eora_s3/target.h

@@ -27,3 +27,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/generic-e22/platformio.ini

@@ -33,6 +33,7 @@ build_src_filter = ${Generic_E22.build_src_filter}
   +<../examples/simple_repeater/*.cpp>
 build_flags =
   ${Generic_E22.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
@@ -79,6 +80,7 @@ build_src_filter = ${Generic_E22.build_src_filter}
   +<../examples/simple_repeater/*.cpp>
 build_flags =
   ${Generic_E22.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
@@ -101,6 +103,7 @@ build_src_filter = ${Generic_E22.build_src_filter}
   +<../examples/simple_repeater/*.cpp>
 build_flags =
   ${Generic_E22.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1268
   -D WRAPPER_CLASS=CustomSX1268Wrapper
   -D LORA_TX_POWER=22
@@ -147,6 +150,7 @@ build_src_filter = ${Generic_E22.build_src_filter}
   +<../examples/simple_repeater/*.cpp>
 build_flags =
   ${Generic_E22.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1268
   -D WRAPPER_CLASS=CustomSX1268Wrapper
   -D LORA_TX_POWER=22

variants/generic-e22/target.cpp

@@ -46,3 +46,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/generic-e22/target.h

@@ -19,3 +19,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_ct62/platformio.ini

@@ -5,6 +5,7 @@ build_flags =
   ${esp32_base.build_flags}
   -I variants/heltec_ct62
   -D HELTEC_HT_CT62=1
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D ESP32_CPU_FREQ=80

variants/heltec_ct62/target.cpp

@@ -34,4 +34,14 @@ void radio_set_tx_power(int8_t dbm) {
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
-}
+}
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_ct62/target.h

@@ -17,4 +17,9 @@ bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
-mesh::LocalIdentity radio_new_identity();
+mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_e213/platformio.ini

@@ -6,6 +6,7 @@ build_flags =
   -I variants/heltec_e213
   -D Vision_Master_E213
   -D ARDUINO_USB_CDC_ON_BOOT=1
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D P_LORA_DIO_1=14

variants/heltec_e213/target.cpp

@@ -52,3 +52,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_e213/target.h

@@ -26,4 +26,9 @@ bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
-mesh::LocalIdentity radio_new_identity();
+mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_e290/platformio.ini

@@ -6,6 +6,7 @@ build_flags =
   -I variants/heltec_e290
   -D Vision_Master_E290
   -D ARDUINO_USB_CDC_ON_BOOT=1
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/heltec_e290/target.cpp

@@ -52,3 +52,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_e290/target.h

@@ -26,4 +26,9 @@ bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
-mesh::LocalIdentity radio_new_identity();
+mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_mesh_solar/platformio.ini

@@ -9,6 +9,7 @@ build_flags =  ${nrf52_base.build_flags}
   -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
   -I variants/heltec_mesh_solar
   -D HELTEC_MESH_SOLAR
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/heltec_mesh_solar/target.cpp

@@ -121,3 +121,13 @@ bool SolarSensorManager::setSettingValue(const char* name, const char* value) {
   }
   return false;  // not supported
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_mesh_solar/target.h

@@ -44,3 +44,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_t114/platformio.ini

@@ -21,6 +21,7 @@ build_flags = ${nrf52_base.build_flags}
   -D P_LORA_MISO=23
   -D P_LORA_MOSI=22
   -D P_LORA_TX_LED=35
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/heltec_t114/target.cpp

@@ -62,3 +62,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_t114/target.h

@@ -33,3 +33,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_t190/platformio.ini

@@ -6,6 +6,7 @@ build_flags =
   -I variants/heltec_t190
   -I src/helpers/ui
   -D HELTEC_VISION_MASTER_T190
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D P_LORA_DIO_1=14

variants/heltec_t190/target.cpp

@@ -52,3 +52,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_t190/target.h

@@ -26,4 +26,9 @@ bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
-mesh::LocalIdentity radio_new_identity();
+mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_tracker/platformio.ini

@@ -14,6 +14,7 @@ build_flags =
   -D P_LORA_SCLK=9
   -D P_LORA_MISO=11
   -D P_LORA_MOSI=10
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/heltec_tracker/target.cpp

@@ -124,3 +124,13 @@ bool HWTSensorManager::setSettingValue(const char* name, const char* value) {
   }
   return false;  // not supported
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_tracker/target.h

@@ -45,3 +45,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_tracker_v2/platformio.ini

@@ -7,6 +7,7 @@ build_flags =
   -I variants/heltec_tracker_v2
   -D HELTEC_TRACKER_V2
   -D ESP32_CPU_FREQ=160
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D P_LORA_TX_LED=18

variants/heltec_tracker_v2/target.cpp

@@ -58,3 +58,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_tracker_v2/target.h

@@ -28,3 +28,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_v2/target.cpp

@@ -50,4 +50,4 @@ void radio_set_tx_power(int8_t dbm) {
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
-}
+}

variants/heltec_v2/target.h

@@ -27,3 +27,5 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+bool radio_get_rx_boosted_gain_mode();

variants/heltec_v3/platformio.ini

@@ -14,6 +14,7 @@ build_flags =
   -D P_LORA_SCLK=9
   -D P_LORA_MISO=11
   -D P_LORA_MOSI=10
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/heltec_v3/target.cpp

@@ -58,3 +58,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_v3/target.h

@@ -28,3 +28,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_v4/platformio.ini

@@ -7,6 +7,7 @@ build_flags =
   -I variants/heltec_v4
   -D HELTEC_LORA_V4
   -D ESP32_CPU_FREQ=80
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D P_LORA_TX_LED=35

variants/heltec_v4/target.cpp

@@ -58,3 +58,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_v4/target.h

@@ -32,3 +32,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/heltec_wireless_paper/platformio.ini

@@ -13,6 +13,7 @@ build_flags =
   -D P_LORA_SCLK=9
   -D P_LORA_MISO=11
   -D P_LORA_MOSI=10
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/heltec_wireless_paper/target.cpp

@@ -51,3 +51,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/heltec_wireless_paper/target.h

@@ -26,4 +26,9 @@ bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
-mesh::LocalIdentity radio_new_identity();
+mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/ikoka_handheld_nrf/platformio.ini

@@ -7,6 +7,7 @@ build_flags = ${nrf52_base.build_flags}
   -I variants/ikoka_handheld_nrf
   -UENV_INCLUDE_GPS
   -D IKOKA_NRF52
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D P_LORA_TX_LED=11

variants/ikoka_handheld_nrf/target.cpp

@@ -44,3 +44,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/ikoka_handheld_nrf/target.h

@@ -27,3 +27,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/ikoka_nano_nrf/platformio.ini

@@ -11,6 +11,7 @@ build_flags = ${nrf52_base.build_flags}
   -I src/helpers/nrf52
   -D P_LORA_TX_LED=11
   -D DISPLAY_CLASS=NullDisplayDriver
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D P_LORA_DIO_1=D1

variants/ikoka_nano_nrf/target.cpp

@@ -42,3 +42,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/ikoka_nano_nrf/target.h

@@ -26,3 +26,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/ikoka_stick_nrf/platformio.ini

@@ -12,6 +12,7 @@ build_flags = ${nrf52_base.build_flags}
   -D P_LORA_TX_LED=11
   -D DISPLAY_CLASS=SSD1306Display
   -D DISPLAY_ROTATION=2
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D P_LORA_DIO_1=D1

variants/ikoka_stick_nrf/target.cpp

@@ -42,3 +42,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/ikoka_stick_nrf/target.h

@@ -26,3 +26,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/keepteen_lt1/platformio.ini

@@ -4,6 +4,7 @@ board = keepteen_lt1
 build_flags = ${nrf52_base.build_flags}
   -I variants/keepteen_lt1
   -D KEEPTEEN_LT1
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/keepteen_lt1/target.cpp

@@ -49,3 +49,13 @@ mesh::LocalIdentity radio_new_identity() {
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
 
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif
+

variants/keepteen_lt1/target.h

@@ -28,3 +28,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/lilygo_t3s3/platformio.ini

@@ -22,6 +22,7 @@ build_flags =
   -D SX126X_DIO2_AS_RF_SWITCH=true
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
   -D SX126X_CURRENT_LIMIT=140
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/lilygo_t3s3/target.cpp

@@ -46,3 +46,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/lilygo_t3s3/target.h

@@ -27,3 +27,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/lilygo_t3s3_sx1276/target.h

@@ -26,4 +26,6 @@ bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
-mesh::LocalIdentity radio_new_identity();
+mesh::LocalIdentity radio_new_identity();
+
+bool radio_get_rx_boosted_gain_mode();

variants/lilygo_tbeam_1w/platformio.ini

@@ -8,6 +8,7 @@ build_flags =
 
   ; Radio - SX1262 with high-power PA (32dBm max output)
   ; Note: Set SX1262 output to 22dBm max, external PA provides additional gain
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D P_LORA_DIO_1=1

variants/lilygo_tbeam_1w/target.cpp

@@ -62,3 +62,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/lilygo_tbeam_1w/target.h

@@ -25,3 +25,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/lilygo_tbeam_SX1262/platformio.ini

@@ -9,6 +9,7 @@ build_flags =
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
   -D SX126X_CURRENT_LIMIT=140
   -D SX126X_RX_BOOSTED_GAIN=1
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D DISPLAY_CLASS=SSD1306Display

variants/lilygo_tbeam_SX1262/target.cpp

@@ -53,3 +53,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/lilygo_tbeam_SX1262/target.h

@@ -27,3 +27,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/lilygo_tbeam_SX1276/target.cpp

@@ -57,4 +57,4 @@ void radio_set_tx_power(int8_t dbm) {
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
-}
+}

variants/lilygo_tbeam_SX1276/target.h

@@ -27,3 +27,5 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+bool radio_get_rx_boosted_gain_mode();

variants/lilygo_tbeam_supreme_SX1262/platformio.ini

@@ -7,6 +7,7 @@ build_flags =
   -D TBEAM_SUPREME_SX1262
   -D SX126X_CURRENT_LIMIT=140
   -D SX126X_RX_BOOSTED_GAIN=1
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D DISPLAY_CLASS=SH1106Display

variants/lilygo_tbeam_supreme_SX1262/target.cpp

@@ -50,3 +50,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/lilygo_tbeam_supreme_SX1262/target.h

@@ -24,4 +24,9 @@ bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
-mesh::LocalIdentity radio_new_identity();
+mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/lilygo_tdeck/platformio.ini

@@ -11,6 +11,7 @@ build_flags =
   -D ARDUINO_USB_CDC_ON_BOOT=1
   -D PIN_USER_BTN=0  ; Trackball button
   -D PIN_PERF_POWERON=10 ; Peripheral power pin
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/lilygo_tdeck/target.cpp

@@ -52,4 +52,14 @@ void radio_set_tx_power(int8_t dbm) {
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng); // create new random identity
-}
+}
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/lilygo_tdeck/target.h

@@ -28,4 +28,9 @@ bool radio_init();
 uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
-mesh::LocalIdentity radio_new_identity();
+mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/lilygo_techo/platformio.ini

@@ -8,6 +8,7 @@ build_flags = ${nrf52_base.build_flags}
   -I lib/nrf52/s140_nrf52_6.1.1_API/include
   -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
   -D LILYGO_TECHO
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/lilygo_techo/target.cpp

@@ -51,3 +51,13 @@ mesh::LocalIdentity radio_new_identity() {
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
 
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif
+

variants/lilygo_techo/target.h

@@ -29,3 +29,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/lilygo_techo_lite/platformio.ini

@@ -8,6 +8,7 @@ build_flags = ${nrf52_base.build_flags}
   -I lib/nrf52/s140_nrf52_6.1.1_API/include
   -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
   -D LILYGO_TECHO
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/lilygo_techo_lite/target.cpp

@@ -50,3 +50,13 @@ mesh::LocalIdentity radio_new_identity() {
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
 
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif
+

variants/lilygo_techo_lite/target.h

@@ -29,3 +29,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/lilygo_tlora_c6/platformio.ini

@@ -23,6 +23,7 @@ build_flags =
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
   -D SX126X_CURRENT_LIMIT=140
   -D SX126X_RX_BOOSTED_GAIN=1
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/lilygo_tlora_c6/target.cpp

@@ -46,3 +46,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/lilygo_tlora_c6/target.h

@@ -18,3 +18,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/lilygo_tlora_v2_1/target.cpp

@@ -46,4 +46,4 @@ void radio_set_tx_power(int8_t dbm) {
 mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
-}
+}

variants/lilygo_tlora_v2_1/target.h

@@ -27,3 +27,5 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+bool radio_get_rx_boosted_gain_mode();

variants/m5stack_unit_c6l/platformio.ini

@@ -22,6 +22,7 @@ build_flags =
   -D SX126X_DIO3_TCXO_VOLTAGE=1.8
   -D SX126X_CURRENT_LIMIT=140
   -D SX126X_RX_BOOSTED_GAIN=1
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/m5stack_unit_c6l/target.h

@@ -19,3 +19,7 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(uint8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/mesh_pocket/platformio.ini

@@ -9,6 +9,7 @@ build_flags =  ${nrf52_base.build_flags}
   -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
   -I variants/mesh_pocket
   -D HELTEC_MESH_POCKET
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22

variants/mesh_pocket/target.cpp

@@ -42,3 +42,13 @@ mesh::LocalIdentity radio_new_identity() {
   RadioNoiseListener rng(radio);
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif

variants/mesh_pocket/target.h

@@ -31,3 +31,8 @@ mesh::LocalIdentity radio_new_identity();
 
 extern SensorManager sensors;
 
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif
+

variants/meshadventurer/platformio.ini

@@ -41,6 +41,7 @@ build_src_filter = ${Meshadventurer.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
 build_flags =
   ${Meshadventurer.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
@@ -89,6 +90,7 @@ build_src_filter = ${Meshadventurer.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
 build_flags =
   ${Meshadventurer.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
@@ -112,6 +114,7 @@ build_src_filter = ${Meshadventurer.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
 build_flags =
   ${Meshadventurer.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1268
   -D WRAPPER_CLASS=CustomSX1268Wrapper
   -D LORA_TX_POWER=22
@@ -160,6 +163,7 @@ build_src_filter = ${Meshadventurer.build_src_filter}
   +<helpers/ui/SSD1306Display.cpp>
 build_flags =
   ${Meshadventurer.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1268
   -D WRAPPER_CLASS=CustomSX1268Wrapper
   -D LORA_TX_POWER=22
@@ -186,6 +190,7 @@ build_src_filter = ${Meshadventurer.build_src_filter}
 build_flags =
   ${Meshadventurer.build_flags}
   -I examples/companion_radio/ui-new
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
@@ -208,6 +213,7 @@ build_src_filter = ${Meshadventurer.build_src_filter}
 build_flags =
   ${Meshadventurer.build_flags}
   -I examples/companion_radio/ui-new
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
@@ -226,6 +232,7 @@ lib_deps =
 extends = Meshadventurer
 build_flags =
   ${Meshadventurer.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
@@ -244,6 +251,7 @@ lib_deps =
 extends = Meshadventurer
 build_flags =
   ${Meshadventurer.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22
@@ -271,6 +279,7 @@ build_src_filter = ${Meshadventurer.build_src_filter}
 build_flags =
   ${Meshadventurer.build_flags}
   -I examples/companion_radio/ui-new
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1268
   -D WRAPPER_CLASS=CustomSX1268Wrapper
   -D LORA_TX_POWER=22
@@ -293,6 +302,7 @@ build_src_filter = ${Meshadventurer.build_src_filter}
 build_flags =
   ${Meshadventurer.build_flags}
   -I examples/companion_radio/ui-new
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1268
   -D WRAPPER_CLASS=CustomSX1268Wrapper
   -D LORA_TX_POWER=22
@@ -311,6 +321,7 @@ lib_deps =
 extends = Meshadventurer
 build_flags =
   ${Meshadventurer.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1268
   -D WRAPPER_CLASS=CustomSX1268Wrapper
   -D LORA_TX_POWER=22
@@ -329,6 +340,7 @@ lib_deps =
 extends = Meshadventurer
 build_flags =
   ${Meshadventurer.build_flags}
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1268
   -D WRAPPER_CLASS=CustomSX1268Wrapper
   -D LORA_TX_POWER=22

variants/meshadventurer/target.cpp

@@ -50,6 +50,16 @@ mesh::LocalIdentity radio_new_identity() {
   return mesh::LocalIdentity(&rng);  // create new random identity
 }
 
+#if defined(USE_SX1262) || defined(USE_SX1268)
+void radio_set_rx_boosted_gain_mode(bool rxbgm) {
+  radio.setRxBoostedGainMode(rxbgm);
+}
+
+bool radio_get_rx_boosted_gain_mode() {
+  return radio.getRxBoostedGainMode();
+}
+#endif
+
 void MASensorManager::start_gps() {
   if(!gps_active) {
     MESH_DEBUG_PRINTLN("starting GPS");

variants/meshadventurer/target.h

@@ -47,3 +47,8 @@ uint32_t radio_get_rng_seed();
 void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
 void radio_set_tx_power(int8_t dbm);
 mesh::LocalIdentity radio_new_identity();
+
+#if defined(USE_SX1262) || defined(USE_SX1268)
+bool radio_get_rx_boosted_gain_mode();
+void radio_set_rx_boosted_gain_mode(bool rxbgm);
+#endif

variants/meshtiny/platformio.ini

@@ -6,6 +6,7 @@ build_flags = ${nrf52_base.build_flags}
   -I lib/nrf52/s140_nrf52_6.1.1_API/include
   -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
   -I variants/meshtiny
+  -D USE_SX1262
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
   -D LORA_TX_POWER=22