Florent de Lamotte
341b69e3c9
sensor list command
2025-10-06 14:08:16 +02:00
Florent
e4f2d63b0a
cli_gps: use sensormanger to toggle gps on/off to keep state coherent
2025-10-05 20:31:25 +02:00
Florent
0502bc370d
CommonCLI: gps management commands
2025-10-05 19:23:52 +02:00
ripplebiz
3912bbdf7d
Merge pull request #821 from fdlamotte/ui_gps_page
...
ui_task: initial gps page
2025-10-02 18:54:23 +10:00
fdlamotte
c83abbeff6
ESM: add gps reset after begin
2025-09-28 09:20:59 +02:00
fdlamotte
030f0d5d82
location provider: reduce reset delay
2025-09-28 09:16:45 +02:00
Florent
76aa7cf488
ui_task: initial gps page
2025-09-23 12:08:34 +02:00
Florent
c1915a1133
ESM: delegate gps management to LocationProvider
2025-09-23 11:12:07 +02:00
ripplebiz
4aa58ade8a
Merge pull request #811 from fdlamotte/tracker_l1_environment_sensors
...
Tracker l1: environment sensors
2025-09-23 15:34:22 +10:00
Florent
611d61b6c6
tracker_l1: fix bme226 init in ESM to include all sensors
2025-09-22 19:10:01 +02:00
Quency-D
669bea04a0
add heltec_v4 board.
2025-09-22 19:58:27 +08:00
Florent
f9543bb7bb
tracker_l1: support for EnvironmentSensorManager
2025-09-21 22:14:22 +02:00
ripplebiz
ce39df599c
Merge pull request #763 from csrutil/fix-environment-sensor-node-altitude
...
Fix node_altitude not being set in EnvironmentSensorManager
2025-09-10 17:45:06 +10:00
Florent de Lamotte
d83cdc501f
ui: use LPPDataHelper and conditionals for sensors page
2025-09-09 16:32:41 +02:00
csrutil
cf93109cd5
✨ feat: add altitude support to environment sensor node telemetry
...
- Include actual node altitude in GPS telemetry instead of hardcoded 0.0f
- Extract altitude data from both ublox_GNSS and serial GPS sources
- Update debug logging to display altitude alongside lat/lon coordinates
2025-09-09 19:20:39 +08:00
recrof
d59724acd0
new variant: RAK WisMesh Tag
2025-09-05 16:21:19 +02:00
Alex Wolden
0c37eafd01
Fixed shunt value for ina226
2025-08-21 13:23:05 -07:00
Alex Wolden
c636536599
Add INA226 to rak
2025-08-20 22:23:54 -07:00
Martin Kudlacek
822850b4d5
Support for Sensirion SHT4x
2025-07-28 10:02:31 +02:00
Martin Kudlacek
a96d1022a0
Added support for TI INA260
2025-07-28 09:41:06 +02:00
taco
ef58ef460b
fix: BMP280 altitude was using incorrect library
2025-07-28 11:29:55 +10:00
Mike Cochrane
93802fe250
Add VL53L0X time-of-flight distance sensor to Heltec V3 Sensor
2025-07-18 22:01:47 +12:00
Mike Cochrane
9f2a77c92e
Add Melexis Contact-less Infrared Sensor - MLX90614 to Heltec V3 Sensor
2025-07-18 18:51:00 +12:00
Mike Cochrane
e4f7b9e37f
Allow the SDA and SCL pins for Environment sensors to be configured independantly. Add Heltec V3 Sensor.
2025-07-18 18:16:59 +12:00
cod3doomy
6b4592bfe2
Cleanup and fixes
...
-Added RAK_4631 define back
-Added includes for common RAK sensors that are currently supported in ESM
-Set global variables to static
-Reduced delay time within the RAK gps init sequence
2025-07-17 10:42:18 -07:00
cod3doomy
660ab0692f
RAK4631 ESM Migration
...
Changes to migrate sensor code to the ESM.
Added a separate GPS init sequence for the RAK that scans I2C and Serial1 on the various sockets of the various base boards to find the RAK12500. (and soon the RAK12501)
Removed the GPS specific envs from platformio.ini and enabled GPS for all envs.
Verified working with RAK12500 on RAK19007 sockets A and D, as well as RAK19003.
2025-07-16 19:04:50 -07:00
marcelverdult
58cffa8f76
Fixed Barometric Pressure Reading for BMP280
...
Measurement has to be divided by 100 same as BME280
2025-07-16 13:50:23 +02:00
jasper
7d47608985
Changed the Barometric Pressure value since it was a factor 100 to high
2025-07-08 21:16:03 +02:00
recrof
539f99a90f
removed unsupported(?) readAltitude
2025-07-02 16:50:47 +02:00
recrof
3832836eb2
EnvironmentSensorManager: add support for SHTC3 and LPS22HB
2025-07-02 16:42:35 +02:00
recrof
9530744ff4
add support for BMP280 temperature+pressure sensor
2025-06-29 00:17:46 +02:00
taco
84c2cfdcf2
fix: revert swapped GPS pins
...
reverted GPS pin behaviour and swapped GPS pins for tbeam variants.
2025-06-24 12:39:07 +10:00
cod3doomy
218b96e4aa
T-Beam refactor
...
There is a lot to this PR, so if there are any questions let me know.
The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions.
- Merged all T-Beam board.h files into one TBeamBoard.
- Added PMU code to identify different AXP chips.
- Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions
- Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions
- Enabled GPS on all T-Beam versions/models
- Enabled BME280 on the Supreme
I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.
2025-06-22 17:46:30 -07:00
taco
83842e4b25
fix: EnvironmentSensorManager.cpp: don't update location if GPS is turned off.
...
previously the location would always snap to the last heard GPS location after GPS had been on.
2025-06-21 10:09:28 +10:00
Scott Powell
6481ab1e31
* MicroNMEALocationProvider: clock param now NULL by default
2025-06-01 23:55:57 +10:00
Florent
1ac03f5592
t1000: remove sync custom var
2025-06-01 15:32:02 +02:00
Florent
c42e414a09
micronmea: was using global rtc_clock to sync instead of _clock
2025-06-01 14:12:22 +02:00
Florent
08aad7338b
gps : sync time on fix
2025-05-31 10:57:22 +02:00
Scott Powell
0defa837d8
* EnvironmentSensorManager: some tidy ups
2025-05-23 19:12:32 +10:00
taco
5987e95ce9
refactor: more conditionals for GPS
...
also re-added some missing returns.
2025-05-23 18:58:45 +10:00
taco
400c4353dc
REFACTOR: sensors are now wrapped in conditionals
2025-05-23 17:08:23 +10:00
taco
23f54dd924
fix: remove stray initSerialGPS call
2025-05-23 14:34:34 +10:00
taco
a466d3cf80
added serial GPS support to EnvironmentSensorClass
...
based on T114 serial GPS and EnvironmentSensorClass.
2025-05-22 15:36:20 +10:00
Normunds Gavars
c4df0ed1c5
Remove NUM_SENSOR_SETTINGS
2025-05-22 00:38:51 +03:00
Normunds Gavars
375a31a436
Remove INA219 wrapper
2025-05-22 00:28:20 +03:00
Normunds Gavars
af0d55548c
Remove unused defines
2025-05-22 00:22:43 +03:00
Normunds Gavars
98d94d9423
Remove sensor wrapper classes and simplify. Switch to Adafruit libs for sensors.
2025-05-22 00:19:00 +03:00
Normunds Gavars
5d9e7b4567
Remove unnecessary include
2025-05-19 20:30:58 +03:00
Normunds Gavars
3cf78a952b
Telemetry: Create BME280 sensor that can bu used across variants. Add to promicro.
2025-05-19 19:37:30 +03:00
Normunds Gavars
8a27743e43
Create sensor classes that can be shared across variants
2025-05-19 17:24:54 +03:00
