MAX_TEXT_LEN is automatically selected based on the LORA_CR build flag
defined in platformio.ini (e.g. -D LORA_CR=5).
CR4/5: 48 bytes (~16 JP chars, TX ~3808ms)
CR4/6: 32 bytes (~10 JP chars)
CR4/7: 24 bytes (~8 JP chars)
CR4/8: 16 bytes (~5 JP chars, default)
To enable CR4/5 for Japan, add -D LORA_CR=5 to your board's
build_flags in platformio.ini. Set LORA_CR=5 for WioTrackerL1 and RAK WisMesh Tag.
JP_STRICT limits MAX_TEXT_LEN to 1*CIPHER_BLOCK_SIZE (16 bytes) to keep
TX time under 4 seconds on SF12/BW125/CR4-8 (Japan LoRa settings).
SF12/BW125/CR4-8 airtime:
60 bytes total packet = ~3809ms (within 4s limit)
packet overhead ~44 bytes, leaving 16 bytes for text payload
Enabled only for WioTrackerL1 and RAK_WisMesh_Tag builds.
Sensors connected via the Grove I2C connector (D18/D17) were not detected
because the firmware scanned the OLED I2C bus (Wire, D14/D15) by default.
Adding ENV_PIN_SDA/SCL flags directs EnvironmentSensorManager to use Wire1,
matching the physical Grove connector pinout.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* MomentaryButton: new constructor 'multiclick' param
* WIoTrackerL1: now just use joystick, joystick press for KEY_ENTER, no multi-click for snappier UI
