* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
Remove the "clock cannot go backwards" restriction from all set-time
paths (CLI `time`, `clock sync`, companion radio CMD_SET_DEVICE_TIME,
and simple_secure_chat). The ESP32-S3 RTC drifts 5-10% during deep
sleep, making backwards correction necessary after even a few days.
Add safeElapsedSecs() helper in ArduinoHelpers.h that clamps elapsed
time to 0 when a stored timestamp appears to be in the future after a
clock correction. Applied to:
- Neighbor "heard X ago" displays in simple_repeater
- UI time displays in companion_radio
- TimeSeriesData calculations in simple_sensor
Switch BaseChatMesh connection expiry from RTC timestamps to monotonic
millis(), making it immune to RTC adjustments from GPS, NTP, or manual
sync. Rename last_activity to last_activity_ms to reflect the change.
The companion_radio example was not restoring the GPS enabled/disabled
preference from flash after reboot. The preference was being saved
correctly when toggled via the mobile app, but on boot,
sensors.begin() -> initBasicGPS() unconditionally sets gps_active=false
and nothing subsequently restored the persisted state.
Added applyGpsPrefs() (matching the pattern in simple_repeater,
simple_sensor, and simple_room_server) and call it from main.cpp
after sensors.begin() to ensure the GPS hardware is initialized
before the saved preference is applied.
- Change > to >= so stored value 1 means direct/0-hop only (liamcottle)
- Clamp max_hops to 63 on write since getPathHashCount() caps at 63 (robekl)
- Update comments to reflect encoding: 0=no limit, 1=direct only, N=up to N-1 hops
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Filter auto-add of new contacts by hop count (issues #1533, #1546).
Setting is configurable from the companion app via extended
CMD_SET/GET_AUTOADD_CONFIG protocol (0 = no limit, 1-63 = max hops).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Instead of overloading getOutboundCount() with a magic sentinel value,
add a dedicated getOutboundTotal() method to the PacketManager interface
that returns the total queue size without time filtering.
This eliminates the fragile convention that caused the regression and
makes the two operations — time-filtered count vs total count —
explicitly separate in the API.
