Added NRF52840 power management core functionality:
- Boot‑voltage lockout
- Initial support for shutdown/reset reason storage and capture (via RESETREAS/GPREGRET2)
- LPCOMP wake (for voltage-driven shutdowns)
- VBUS wake (for voltage-driven shutdowns)
- Per-board shutdown handler for board-specific tasks
- Exposed CLI queries for power‑management status in CommonCLI.cpp
- Added documentation in docs/nrf52_power_management.md.
- Enabled power management support in Xiao nRF52840, RAK4631, Heltec T114 boards
As all NRF52 boards now have OTA support, let's remove the subclass
and integrate it into the base class.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
The startOTAUpdate() is the same for all NRF52 boards. Use a common
implementation for all boards that currently have a specific
implementation.
The following boards currently have an empty startOTAUpdate() for
whatever reasons and therefore are not inheriting NRF52BoardOTA to
keep the same state: Nano G2 Ultra, Seeed SenseCAP T1000-E,
Wio WM1110.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
Some NRF52 boards are able to use the internal power-efficient DC/DC
regulator. Add a new class that can be inherited by board classes to
enable this feature and reduce the power consumption.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
Use a common begin() method that can be called from derived classes
to contain the shared initialization code.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
Some versions of the Wio-SX1262 board don't have the button and the
pullup resistor populated. Enable the internal pullup to prevent
a floating pin and spurious button presses on those boards.
This fixes#1173.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
Add the necessary code to properly power-off the Xiao + Wio
companions. This way we can achieve around 15 microamps of power
consumption in the off state.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
The Xiao nRF52840 combined with the Wio-SX1262 is often used for
cheap and compact DIY companion nodes. The Wio actually has an onboard
pushbutton that can be used as user button. Enable support for the
button.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
Pulled the class out of main.cpp, made a header to go along with it, externed globals in headers to make them accessible to button code. Added button code to send an advert on double press. Refactored ini files to prevent linker errors.
* BasChatMesh: new onContactRequest(), for PAYLOAD_TYPE_REQ handling.
* companion, repeater and room_server: now with basic 'plumbing' to handle REQ_TYPE_GET_TELEMETRY_DATA (0x03).
* dependency: added CayenneLPP to libdeps
* all target.* modules now with a stub 'sensors' object.
