meshcore-dev/MeshCore
1
0
Fork 0
mirror of https://github.com/meshcore-dev/MeshCore.git synced 2026-04-20 22:13:47 +00:00
Code Issues Projects Releases Packages Wiki Activity

Add centralized LEDManager for configurable LED behavior

Browse source 
Adds a LEDManager class (src/helpers/ui/LEDManager.h) that centralizes
all LED control into one component with begin()/loop() lifecycle and
per-pin active-HIGH/LOW polarity support.

LED settings are exposed as custom vars (led.status, led.activity)
accessible via companion radio binary protocol, CLI set/get commands,
and the SensorManager settings interface.

Status LED modes: off, boot-30s, slow blink (200ms/4s), always on.
Activity LED modes: off, BLE only, LoRa TX only, BLE + LoRa TX.

Integrated into 23 board variants, replacing scattered hardcoded
digitalWrite calls in onBeforeTransmit/onAfterTransmit/powerOff.
This commit is contained in:
Ryan Gregg 2026-03-20 18:19:44 -07:00
parent 467959cc3b
commit e2aa33b3a0
60 changed files with 497 additions and 185 deletions
Download patch file Download diff file Expand all files Collapse all files

10
variants/thinknode_m6/ThinkNodeM6Board.cpp
View file

@ -10,12 +10,12 @@ void ThinkNodeM6Board::begin() {
Wire.begin();
#ifdef P_LORA_TX_LED
pinMode(P_LORA_TX_LED, OUTPUT);
digitalWrite(P_LORA_TX_LED, LOW);
#endif
delay(10); // give sx1262 some time to power up
// Start LEDs with defaults; prefs are applied after loadPrefs()
static LEDManager _ledManager(PIN_LED_RED, PIN_LED_BLUE);
ledManager = &_ledManager;
ledManager->begin(LED_STATUS_BOOT_30S, LED_ACTIVITY_BOTH);
}
uint16_t ThinkNodeM6Board::getBattMilliVolts() {

13
variants/thinknode_m6/ThinkNodeM6Board.h
View file

@ -3,6 +3,7 @@
#include <Arduino.h>
#include <MeshCore.h>
#include <helpers/NRF52Board.h>
#include <helpers/ui/LEDManager.h>
// built-ins
#define VBAT_MV_PER_LSB (0.73242188F) // 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
@ -23,25 +24,19 @@ public:
void begin();
uint16_t getBattMilliVolts() override;
#if defined(P_LORA_TX_LED)
void onBeforeTransmit() override {
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
if (ledManager) ledManager->onBeforeTransmit();
}
void onAfterTransmit() override {
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
if (ledManager) ledManager->onAfterTransmit();
}
#endif
const char* getManufacturerName() const override {
return "Elecrow ThinkNode M6";
}
void powerOff() override {
// turn off all leds, sd_power_system_off will not do this for us
#ifdef P_LORA_TX_LED
digitalWrite(P_LORA_TX_LED, LOW);
#endif
if (ledManager) ledManager->powerOff();
// power off board
sd_power_system_off();