ha7ilm/openwebrx
1
0
Fork 0
mirror of https://github.com/ha7ilm/openwebrx.git synced 2026-01-02 06:29:57 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity

Created Setting up OpenWebRX on a Raspberry Pi 2 (markdown)

András Retzler 2015-10-18 00:31:23 +02:00
parent 07f186b3b6
commit c8267042da
1 changed files with 21 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

21
Setting-up-OpenWebRX-on-a-Raspberry-Pi-2.md Normal file

@ -0,0 +1,21 @@
OpenWebRX should work out-of-the-box on your RPi, if you set it up by [going through this guide](http://ha5kfu.sch.bme.hu/openwebrx-quick-setup).
On this page I list some common errors that people have encountered:
## Some general advice to increase reliability and security
### Avoid possible file system corruption on poweroff
If you just pull the plug from your Raspberry without properly shutting it down, it may or may not boot the next time.
#### 1. Shutdown the RPi with `halt` every time
Use the proper command to halt the operating system:
sudo halt
You will see one of the LEDs blinking at a given time interval, and then both LEDs switch off.
#### 3. Start your system in read-only mode, and switch to read-write only if required.
In my article about [pi-rw](http://ha5kfu.sch.bme.hu/node/160) you will find advice on doing that.