The existing implementation restarts the loop immediately after
finding a range_data instance that updates the trampled_range.
This commit refactors this method to continue the loop with the updated
trampled_range, and then repeat only those range_data instances that
were iterated through before the trampled_range was last updated.
As a result, the number of total iterations required is reduced.
When the trampled range changes, get_intersecting_set restarts the
outer loop. However, due to an off-by-one error, it skips the first
cache entry when doing so. This can cause a texture not to be
correctly unlocked, which could lead to issues or even deadlocks.
This commit fixes this off-by-one error.
- Avoid re-locking memory if there is no reason to do so (no draws issued)
- Actively bound regions should always get written to the backing cache
- Forcefully read memory during download if writes to the target have occured since last sync event
- Some applications (e.g Backbreaker) use an evil hack to resolve MSAA.
The application respecifies a formerly AA region as a region with no AA then performs a framebuffer feedback lookup.
The old memory keeps AA during read, but writes back to itself with AA resolved.
This is evil on several levels but it just happens to work on PS3
1. rsx: Rework section synchronization using the new memory mirrors
2. rsx: Tweaks
- Simplify peeking into the current rsx::thread instance.
Use a simple rsx::get_current_renderer instead of asking fxm for the same
- Fix global rsx super memory shm block management
3. rsx: Improve memory validation. test_framebuffer() and
tag_framebuffer() are simplified due to mirror support
4. rsx: Only write back confirmed memory range to avoid overapproximation errors in blit engine
5. rsx: Explicitly mark clobbered flushable sections as dirty to have them
removed
6. rsx: Cumulative fixes
- Reimplement rsx::buffered_section management routines
- blit engine subsections are not hit-tested against confirmed/committed memory range
Not all applications are 'honest' about region bounds, making the real cpu range useless for blit ops
- gl/vk: Fix subresource copy/blit
- gl/vk: Fix default_component_map reading
- vk: Reimplement cell readback path and improve software channel decoder
- Properly name the subresource layout field - its in blocks not bytes!
- Implement d24s8 upload from memory correctly
- Do not ignore DEPTH_FLOAT textures - they are depth textures and abide by the depth compare rules
- NOTE: Redirection of 16-bit textures is not implemented yet
- Ignore unlocked blit sections [TODO]
- Do not attempt blit on hw if bytesize is unsupported
- gl: Implement typeless memory transfers
Uses pbo to handle type-agnostic memory transfer
- Reimplements render target views used for sampling
- Optimizes access using an encoded control token
- Adds proper encoding for 24-bit textures (DRGB8 -> ORGB/OBGR)
- Adds proper encoding for ABGR textures (ABGR8 -> ARGB8)
- Silence some compiler warnings as well
- TODO: Real texture views for OGL current method is a hack
- Separate TXB from TXL: They are completely different!
- Properly perform TMU emulation in the fragment shader. Implemens SRGB conversion and alphakill at the moment
- Properly perform ROP emulation in the fragment shader. Implements FRAMEBUFFER_SRGB. While support on the chip looks to be incomplete (and wierd), it does work
- Document some more bits in SHADER_CONTROL register
- Forces Bitcast of texture data if input format cannot possibly be the
same as the existing texture format
- rsx: Other minor improvements to texture cache :-
- remove obsolete blit engine incompatibility warning. The texture will be re-uploaded if it is indeed incompatible
- Implement warn_once and err_once to avoid spamming the log with systemic errors
- Track mispredicted flushes
- Reswizzle bitcasted texture data to native layout
TODO: Also needs reshuffle according to input remap vector
- Identify depth textures reaching the gpu via shader_read upload path
- Use correct timestamp counter for opengl
- inline draw_state::test_property because msvc doesnt do it for us
- Implement flush-always behaviour to partially fix readback from a currently bound fbo
- Without this, only the first read is correct, as more draws are added the results become 'wrong'
- Fixes WCB and cpublit behviour
- Synchronize blit_dst surfaces to avoid data loss when gpu texture scaling is used
- Its still faster in such cases to disable gpu texture scaling but some types cannot be disabled without force cpu blit (e.g framebuffer transfers)
- Memory management tuning
- rsx: on-demand texture cache rescanning for unprotected sections
- rsx: Only framebuffer resources are upscaled
- Do not resize regular blit engine resources
- Lazy initialize readback buffer when using opengl
-- These measures should help minimize vram usage
- Do not assume texture2D when creating new textures
- Flag invalid texture cache if readonly texture is trampled by fbo memory.
Avoids binding a stale handle to the pipeline and is rare enough that it should not hurt performance
- Force mipmap count to 1 if sampling from an RTV/DSV
- TODO: Better wcb flush detection, it should be better to re-upload the texture after it has been dwnloaded if expected mipmaps are > 1
- Sometimes square renders are done to surfaces with pitch=64 and re-uploaded with swizzle scanning
-- This setup avoids discarding targets if they are square and pitch == 64
- Abort nv406e semaphore acquire if the rsx thread stalls/crashes
- Fix texture size approximation to take mipmaps into account. Fixes some games hanging with WCB
- Avoid unprotecting memory until just before we have to write the data
- Avoids race conditions where the caller thread takes too long to enter the second phase and another thread accesses the "bad" memory
- Discard intentionally invalidated framebuffer resources. These are created after a flush has happened, forcing reupload since contents cannot be guaranteed (strict mode only)
- Fix for blits using vulkan; dont use the copy method if formats do not match, use generic blit instead
- Fix texture cache blit behaviour when src has AA enabled and dst is a blit dst texture with or without AA
-- This requires handling AA resolve by removing a half downscale on multisampled axes
- Return all ones when a vertex attribute is disabled.
-- Some games forget to enable vertex attributes actually needed by the fs
- texture_cache: Fix internal size calculation for subresources
- vk: Delay dynamic state updates until just about to draw to ensure no flush has discarded the cb state
- Support for raster offsets in surface descriptors (looks to be unused)
- Do not tag disabled render targets when using MRT (pitch = 64)
- Add missing notify_surface_changed() call for openGL
- Use AA mode to predict surface compression. Compression mode is useless without AA activated
- Rewrites most image subresource fetch routines to use the new heuristic
- Fix rsx:🧵:find_tile. FEED000(X) can be substituted for (X) in the code
-- Fixes alot of failures when looking for tiled regions
rsx: Fix antialiased unnormalized coords
- scaling factors are inverse to allow proper coordinates to be computed in fs
- Reimplement fragment program fetch and rewrite texture upload mechanism
-- All of these steps should only be done at most once per draw call
-- Eliminates continously checking the surface store for overlapping addresses as well
addenda - critical fixes
- gl: Bind TIU before starting texture operations as they will affect the currently bound texture
- vk: Reuse sampler objects if possible
- rsx: Support for depth resampling for depth textures obtained via blit engine
vk/rsx: Minor fixes
- Fix accidental imageview dereference when using WCB if texture memory occupies FB memory
- Invalidate dirty framebuffers (strict mode only)
- Normalize line endings because VS is dumb
to flush_all is up to date. Should prevent recursive exceptions
Partially revert Jarves' fix to invalidate cache on tile unbind. This will
need alot more work. Fixes hangs
- This allows for better handling of deferred flushes.
-- There's still no guarantee that cache contents will have changed between the set acquisition and following flush operation
-- Hopefully this is rare enough that it doesnt cause serious issues for now
- vk: Always reopen primary command buffers. They should only be closed in flush_command_queue
- If uploading a texture and there are collisions with protected buffers, do not rebuild the cache
- Perform writes via flush before reprotecting pages that were not trampled
- Only flush no pages once
- Refactor invalidate memory functions into one function
- Add cached object rebuilding functionality to avoid throwing away useful memory on an invalidate
- Added debug monitoring of texture unit VRAM usage
rsx: Conditional lock hack removed
vulkan - Fixes
- Remove unused texture class
- Fix native pitch calculation (WCB)
rsx: Catch hanging begin/end pairs when flushing deferred draw calls
vulkan: Register DXT compressed formats
vulkan: Register depth formats
gl: Workaround for 'texture stitching' when gathering flip surface
- TODO: Add a proper flip hack option
rsx: Fix texture memory size calculation
- DXT textures dont have real pitch. Since pitch is used to calculate memory size, make sure it always evaluates to rsx_size
rsx: Fix cpu copy detection
rsx: Validate blit dst surface and dont make assumptions about region blit order
- Also relax restrictions on memory owned by the blit engine if strict rendering is not enabled
rsx: Fix depth texture detection
rsx: Do not manually offset into dst. The overlapped range check does so automatically
rsx: Minor optimizations
rsx: Minor fixes
- Fix to detect incompatible formats when using GPU texture scaling and show message
- Better 'is_depth_texture' algorithm to eliminate false positives
- Limits buffer size to min 720 in the Y axis (1024 section causes conflicts in some cases - TODO)
rsx: Fixups to allow large textures for blit operation
- Also includes checks for both leaking sections and blit regions for vulkan
hotfix for hanging when using WCB
addendum - unlock both ro and no blocks before attempting to copy memory blocks
gl: Fixups for ARB_explicit_uniform_location
- Forces glsl v 430 to make use of the extension
rsx/vk: Rework texture cache to minimize recursive access violations
- Also modifies the vulkan commandbuffer begin/end/submit mechanism
gl: Fix cached_texture_section::is_flushable to take memory protection into account
rsx: Fix blit dst offset calculation
gl/vk/rsx: Refactoring; unify texture cache code
gl: Fixups
- Removes rsx::gl::texture class and leave gl::texture intact
- Simplify texture create and upload mechanisms
- Re-enable texture uploads with the new texture cache mechanism
rsx: texture cache - check if bit region fits into dst texture before attempting to copy
gl/vk: Cleanup
- Set initial texture layout to DST_OPTIMAL since it has no data in it anyway at the start
- Move structs outside of classes to avoid clutter
