rpcsx/rpcs3/Emu/Io/PadHandler.h

#pragma once

enum PortStatus
{
	CELL_PAD_STATUS_DISCONNECTED	= 0x00000000,
	CELL_PAD_STATUS_CONNECTED		= 0x00000001,
	CELL_PAD_STATUS_ASSIGN_CHANGES	= 0x00000002,
};

enum PortSettings
{
	CELL_PAD_SETTING_PRESS_ON		= 0x00000002,
	CELL_PAD_SETTING_SENSOR_ON		= 0x00000004,
	CELL_PAD_SETTING_PRESS_OFF		= 0x00000000,
	CELL_PAD_SETTING_SENSOR_OFF		= 0x00000000,
};

enum Digital1Flags
{
	CELL_PAD_CTRL_LEFT		= 0x00000080,
	CELL_PAD_CTRL_DOWN		= 0x00000040,
	CELL_PAD_CTRL_RIGHT		= 0x00000020,
	CELL_PAD_CTRL_UP		= 0x00000010,
	CELL_PAD_CTRL_START		= 0x00000008,
	CELL_PAD_CTRL_R3		= 0x00000004,
	CELL_PAD_CTRL_L3		= 0x00000002,
	CELL_PAD_CTRL_SELECT	= 0x00000001,
};

enum Digital2Flags
{
	CELL_PAD_CTRL_SQUARE	= 0x00000080,
	CELL_PAD_CTRL_CROSS		= 0x00000040,
	CELL_PAD_CTRL_CIRCLE	= 0x00000020,
	CELL_PAD_CTRL_TRIANGLE	= 0x00000010,
	CELL_PAD_CTRL_R1		= 0x00000008,
	CELL_PAD_CTRL_L1		= 0x00000004,
	CELL_PAD_CTRL_R2		= 0x00000002,
	CELL_PAD_CTRL_L2		= 0x00000001,
};

enum DeviceCapability
{
	CELL_PAD_CAPABILITY_PS3_CONFORMITY  = 0x00000001, //PS3 Conformity Controller
	CELL_PAD_CAPABILITY_PRESS_MODE      = 0x00000002, //Press mode supported
	CELL_PAD_CAPABILITY_SENSOR_MODE     = 0x00000004, //Sensor mode supported
	CELL_PAD_CAPABILITY_HP_ANALOG_STICK = 0x00000008, //High Precision analog stick
	CELL_PAD_CAPABILITY_ACTUATOR        = 0x00000010, //Motor supported
};

enum DeviceType
{
	CELL_PAD_DEV_TYPE_STANDARD		= 0,
	CELL_PAD_DEV_TYPE_BD_REMOCON	= 4,
	CELL_PAD_DEV_TYPE_LDD			= 5,
};

enum ButtonDataOffset
{
	CELL_PAD_BTN_OFFSET_DIGITAL1		= 2,
	CELL_PAD_BTN_OFFSET_DIGITAL2		= 3,
	CELL_PAD_BTN_OFFSET_ANALOG_RIGHT_X	= 4,
	CELL_PAD_BTN_OFFSET_ANALOG_RIGHT_Y	= 5,
	CELL_PAD_BTN_OFFSET_ANALOG_LEFT_X	= 6,
	CELL_PAD_BTN_OFFSET_ANALOG_LEFT_Y	= 7,
	CELL_PAD_BTN_OFFSET_PRESS_RIGHT		= 8,
	CELL_PAD_BTN_OFFSET_PRESS_LEFT		= 9,
	CELL_PAD_BTN_OFFSET_PRESS_UP		= 10,
	CELL_PAD_BTN_OFFSET_PRESS_DOWN		= 11,
	CELL_PAD_BTN_OFFSET_PRESS_TRIANGLE	= 12,
	CELL_PAD_BTN_OFFSET_PRESS_CIRCLE	= 13,
	CELL_PAD_BTN_OFFSET_PRESS_CROSS		= 14,
	CELL_PAD_BTN_OFFSET_PRESS_SQUARE	= 15,
	CELL_PAD_BTN_OFFSET_PRESS_L1		= 16,
	CELL_PAD_BTN_OFFSET_PRESS_R1		= 17,
	CELL_PAD_BTN_OFFSET_PRESS_L2		= 18,
	CELL_PAD_BTN_OFFSET_PRESS_R2		= 19,
	CELL_PAD_BTN_OFFSET_SENSOR_X		= 20,
	CELL_PAD_BTN_OFFSET_SENSOR_Y		= 21,
	CELL_PAD_BTN_OFFSET_SENSOR_Z		= 22,
	CELL_PAD_BTN_OFFSET_SENSOR_G		= 23,
};

static const u32 CELL_MAX_PADS = 127;
static const u32 CELL_PAD_MAX_PORT_NUM = 7;
static const u32 CELL_PAD_MAX_CODES = 64;

struct Button
{
	u32 m_offset;
	u32 m_keyCode;
	u32 m_outKeyCode;
	bool m_pressed;
	bool m_flush;

	Button(u32 offset, u32 keyCode, u32 outKeyCode)
		: m_pressed(false)
		, m_flush(false)
		, m_offset(offset)
		, m_keyCode(keyCode)
		, m_outKeyCode(outKeyCode)
	{
	}
};

struct Pad
{
	u32 m_port_status;
	u32 m_port_setting;
	u32 m_device_capability;
	u32 m_device_type;

	Array<Button> m_buttons;

	s16 m_analog_left_x;
	s16 m_analog_left_y;
	s16 m_analog_right_x;
	s16 m_analog_right_y;

	u16 m_press_right;
	u16 m_press_left;
	u16 m_press_up;
	u16 m_press_down;
	u16 m_press_triangle;
	u16 m_press_circle;
	u16 m_press_cross;
	u16 m_press_square;
	u16 m_press_L1;
	u16 m_press_L2;
	u16 m_press_R1;
	u16 m_press_R2;

	u16 m_sensor_x;
	u16 m_sensor_y;
	u16 m_sensor_z;
	u16 m_sensor_g;

	Pad(u32 port_status, u32 port_setting, u32 device_capability, u32 device_type)
		: m_port_status(port_status)
		, m_port_setting(port_setting)
		, m_device_capability(device_capability)
		, m_device_type(device_type)

		, m_analog_left_x(0)
		, m_analog_left_y(0)
		, m_analog_right_x(0)
		, m_analog_right_y(0)

		, m_press_right(0)
		, m_press_left(0)
		, m_press_up(0)
		, m_press_down(0)
		, m_press_triangle(0)
		, m_press_circle(0)
		, m_press_cross(0)
		, m_press_square(0)
		, m_press_L1(0)
		, m_press_L2(0)
		, m_press_R1(0)
		, m_press_R2(0)

		, m_sensor_x(0)
		, m_sensor_y(0)
		, m_sensor_z(0)
		, m_sensor_g(0)
	{
	}

	~Pad() { m_buttons.Clear(); }
};

struct PadInfo
{
	u32 max_connect;
	u32 now_connect;
	u32 system_info;
};

class PadHandlerBase
{
protected:
	PadInfo m_info;
	Array<Pad> m_pads;

public:
	virtual void Init(const u32 max_connect)=0;
	virtual void Close()=0;

	void Key(const u32 code, bool pressed)
	{
		for(u64 p=0; p<GetPads().GetCount(); ++p)
		{
			for(u64 b=0; b<GetButtons(p).GetCount(); b++)
			{
				Button& button = GetButtons(p).Get(b);
				if(button.m_keyCode != code) continue;

				GetPads()[p].m_port_status |= CELL_PAD_STATUS_ASSIGN_CHANGES;

				if(button.m_pressed && !pressed)
				{
					button.m_flush = true;
				}
				else
				{
					button.m_pressed = pressed;
				}
			}
		}
	}

	PadInfo& GetInfo() { return m_info; }
	Array<Pad>& GetPads() { return m_pads; }
	Array<Button>& GetButtons(const u32 pad) { return GetPads()[pad].m_buttons; }
};