We are looking at the exponent at limb granularity and therefore
exponent bits can't go below 32.
The `mpi_` prefix is also removed as it is better not to have prefix at
all than to have just a partial. (Full prefix would be overly long and
would hurt readability.)
Signed-off-by: Janos Follath <janos.follath@arm.com>
Now that we have a function that calls
mbedtls_mpi_core_ct_uint_table_lookup(), the compiler won't complain if
we make it static.
Signed-off-by: Janos Follath <janos.follath@arm.com>
On platforms with size_t different from int, mismatch between size_t and
mpi_uint can cause incorrect results or complaints from the compiler.
Signed-off-by: Janos Follath <janos.follath@arm.com>
mpi_core_exp_mod: Cast local variable explicitly
Signed-off-by: Janos Follath <janos.follath@arm.com>
In this way, in case of error, it is not possible to continue using
the same psa_pake_operation_t without reinitializing it.
This should make the PSA pake's behavior closer to what expected by
the specification
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The first half of the table is not used, let's reuse index 0 for the
result instead of appending it in the end.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The table size was set before the configured window size bound was
applied which lead to out of bounds access when the configured window
size bound is less.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The window size starts giving diminishing returns around 6 on most
platforms and highly unlikely to be more than 31 in practical use cases.
Still, compilers and static analysers might complain about this and
better to be pedantic.
Co-authored-by: Gilles Peskine <gilles.peskine@arm.com>
Signed-off-by: Janos Follath <janos.follath@arm.com>
With small exponents (for example, when doing RSA-1024 with CRT, each
prime is 512 bits and we'll use wsize = 5 which may be smaller that the
maximum - or even worse when doing public RSA operations which typically
have a 16-bit exponent so we'll use wsize = 1) the usage of W will have
pre-computed values, then empty space, then the accumulator at the very
end.
Move X next to the precomputed values to make accesses more efficient
and intuitive.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Elements of W didn't all have the same owner: all were owned by this
function, except W[x_index]. It is more robust if we make a proper copy
of X.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Out of window zeroes were doing squaring on the output variable
directly. This leaks the position of windows and the out of window
zeroes.
Loading the output variable from the table in constant time removes this
leakage.
Signed-off-by: Janos Follath <janos.follath@arm.com>
It might happen that the psa_pake_output() function returns
elements which are not exactly 32 or 65 bytes as expected, but
1 bytes less.
As a consequence, insted of hardcoding the expected value for
the length in the output buffer, we write the correct one as
obtained from psa_pake_output()
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
NEW_SESSION_TICKETS* are processed in handshake_step.
Change the stop condition from `mbedtls_ssl_is_handshake_over`
to directly check.
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Inlined functions might cause the compiled code to have different sizes
depending on the usage and this not acceptable in some cases.
Therefore read/write functions used in the initial key exchange are
moved to a standard C file.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The value of the first sent signature algorithm is overwritten.
This test forces only a single algorithm to be sent and then
validates that the client received such algorithm.
04 03 is the expected value for SECP256R1_SHA256.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Fix bug whereby the supported signature algorithm list sent by the
server in the certificate request would not leave enough space for the
length to be written, and thus the first element would get overwritten,
leaving two random bytes in the last entry.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
When x is the most negative value of a two's complement type,
`(unsigned_type)(-x)` has undefined behavior, whereas `-(unsigned_type)x`
has well-defined behavior and does what was intended.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix undefined behavior (typically harmless in practice) of
mbedtls_mpi_add_mpi(), mbedtls_mpi_add_abs() and mbedtls_mpi_add_int() when
both operands are 0 and the left operand is represented with 0 limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Additionally use psa_get_and_lock_key_slot_with_policy() to obtain key.
This requires making this function public. This will have to be solved while adding driver dipatch for EC-JPAKE.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
In mbedtls_mpi_add_mpi() and mbedtls_mpi_sub_mpi(), and by extention
mbedtls_mpi_add_int() and mbedtls_mpi_sub_int(), when the resulting value
was zero, the sign bit of the result was incorrectly set to -1 when the
left-hand operand was negative. This is not a valid mbedtls_mpi
representation. Fix this: always set the sign to +1 when the result is 0.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_add_mpi() and mbedtls_mpi_sub_mpi() have the same logic, just
with one bit to flip in the sign calculation. Move the shared logic to a new
auxiliary function. This slightly reduces the code size (if the compiler
doesn't inline) and reduces the maintenance burden.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add fields to mbedtls_ssl_context
Add write early data indication function
Add check whether write early data indication
Add early data option to ssl_client2
Add test cases for early data
Signed-off-by: Xiaokang Qian <xiaokang.qian@arm.com>
This patch updates the `mbedtls_mpi_mod_raw_conv_xx()` methods
as follows:
* Renamed for simplicity: conv_fwd -> from_mont_rep, conv_inv -> to_mont_rep.
* Uncoupled the dependency on the legaly bignum interface.
* `mbedtls_mpi` is no longer used for temporary buffer allocation.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
A core MPI must have at least 1 limb. We can no longer test with 0 limbs,
and we don't need to anyway, so don't try.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix the PSA_XXX typos detected by check_names.py.
PSA_WANT is actually not typo, but would cause a false negative
result. So PSA_WANT is reworded to PSA_WANT_xxx.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Add component_test_psa_config_accel_ecdh to all.sh to test key agreement driver wrapper with libtestdriver1.
Signed-off-by: Aditya Deshpande <aditya.deshpande@arm.com>
Legacy Bignum is excluded as it doesn't get regular extensions like new
ones.
Each slot uses comments of their respective filetype. Since .data files
don't have a syntax for comments, dummy test cases are used. (These test
cases will never be executed and no noise will be added to tests.)
Signed-off-by: Janos Follath <janos.follath@arm.com>
Turn mpi_fill_random_internal() into mbedtls_mpi_core_fill_random(). It
had basically the right code except for how X is passed to the function.
Write unit tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove an unnecessary debug print (whoops).
Use new error code for when the x509 is expired.
When there are no signers return invalid certificate.
Signed-off-by: Nick Child <nick.child@ibm.com>
Co-authored-by: Dave Rodgman <dave.rodgman@arm.com>
Signed-off-by: Nick Child <nick.child@ibm.com>
This will be needed for extracting modular exponentiation from the
prototype. The function signature is kept aligned to the prototype, but
the implementation is new. (The implementation of this function in the
prototype has further optimisations which are out of scope for now.)
The function is not reused in the bignum counterpart as it will become
redundant soon.
This function is meant to be static, but doesn't have the qualifier as
it is not used yet and would cause compiler warnings. The
MBEDTLS_STATIC_TESTABLE macro will be added in a later commit.
Signed-off-by: Janos Follath <janos.follath@arm.com>
This skips zeroizing additional pointers to data.
(Note: actual sensitive data should still be zeroized when freed.)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
This patch addresses more review comments, and fixes
a circular depedency in the `mbedtls_mpi_mod_modulus_setup()`.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch addresses review comments with regards to style of
`mbedtls_mpi_mod_modulus_setup/free()`.
It also removes a test check which was triggering a use-after-free.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch updates the `mbedtls_mpi_mod_modulus_setup/free()`
methods to precalculate mm and rr(Montgomery const squared) during
setup and zeroize it during free.
A static `set_mont_const_square()` is added to manage the memory allocation
and parameter checking before invoking the
`mbedtls_mpi_core_get_mont_r2_unsafe()`
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
In the PSK exchange modes extension declare first
PSK ephemeral if we support both PSK ephemeral
and PSK. This is aligned with our implementation
giving precedence to PSK ephemeral over pure PSK
and improve compatibility with GnuTLS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
'mbedtls_mpi_core_get_mont_R2_unsafe' aligns const
keyword to match the style of the rest of the module.
Documentation is also updated to remove
`MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED`.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
Mark unused variables when compiling without
SHA256 and SHA384. In future a proper dependency
will be added to TLS 1.2 to enforce either of these hashes
to be on.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
One version was already surrounded by the USE_PSA define,
so the VIA_XX_OR_XX macros were removed;
Second version is when USE_PSA is undefined, so MBEDTLS_
macros can be used.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Introduce and use
MBEDTLS_SSL_HANDSHAKE_WITH_PSK_ENABLED to
guard TLS code (both 1.2 and 1.3) specific
to handshakes involving PSKs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Introduce and use
MBEDTLS_SSL_HANDSHAKE_WITH_CERT_ENABLED to
guard TLS code (both TLS 1.2 and 1.3) specific
to handshakes involving certificates.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_SOME_PSK_ENABLED
instead of MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED to guard
code specific to one of the TLS 1.3 key exchange mode with
PSK.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
instead of MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED to guard
code specific to the TLS 1.3 ephemeral key exchange mode.
Use it also for the dependencies of TLS 1.3 only tests
relying on ephemeral key exchange mode, but for
tests in tls13-kex-modes.sh where the change is done
later using all
MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_.*ENABLED macros.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Check that the identity length is not
zero in ssl_conf_set_psk_identity()
as it is done in
mbedtls_ssl_conf_has_static_psk().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When deriving the handshake stage master
secret, in the case of a PSK only build,
the only possible key exchange mode is PSK
and there is no ephemeral key exchange
shared secret in that case. Thus do not
error out in that case in the first
phae of the derivation dedicated to the
shared secret.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
`handshake->premaster` was used to store the
(EC)DHE shared secret but in TLS 1.3 there is
no need to store it in a context.
Futhermore, `handshake->premaster` and more
specifically its sizing is TLS 1.2 specific
thus better to not use it in TLS 1.3.
Allocate a buffer to store the shared secret
instead. Allocation instead of a stack buffer
as the maintenance of the size of such buffer
is harder (new elliptic curve for ECDHE,
support for FFDHE ... ).
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In mbedtls_ssl_tls13_evolve_secret() avoid
to copy the input buffer into a local buffer
as the copy is avoidable.
This also fixes a potential overflow as the
size of the local buffer was not checked when
copying into it.
With the current calls to mbedtls_ssl_tls13_evolve_secret()
no buffer overflow was expected to happen though.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit contains the function prototype for mbedtls_mpi_core_shift_r,
and the implementation minimally modified from mbedtls_mpi_shift_r.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This caused problems if a config with SHA512 was
compiled after a config without it and the seedfile
did not contain enough data.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
When building SHA512 without SHA384,
there are some code paths that resulted
in unused variables or usage of undefined code.
This commit fixes that.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
