Remove useless hrr code
Share validate_cipher_suit between client and server
Fix test failure when tls13 only in server side
Change-Id: I5d6a7932bd8448ebf542bc86cdcab8862bc28e9b
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Refine named_group parsing
Refine cipher_suites parsing
Remove hrr related part
Share code between client and server side
Some code style changes
Change-Id: Ia9ffd5ef9c0b64325f633241e0ea1669049fe33a
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Use mbedtls_ssl_protocol_version in public structs, even when doing
so results in a binary-incompatible change to the public structure
(PR feedback from @ronald-cron-arm)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
remove use of MBEDTLS_SSL_MINOR_VERSION_*
remove use of MBEDTLS_SSL_MAJOR_VERSION_*
(only remaining use is in tests/suites/test_suite_ssl.data)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible, as the struct is now smaller.
Reduce size of mbedtls_ssl_ciphersuite_t
members are defined using integral types instead of enums in
order to pack structure and reduce memory usage by internal
ciphersuite_definitions[]
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible on little-endian platforms,
but is compatible on big-endian platforms. For systems supporting
only TLSv1.2, the underlying values are the same (=> 3).
New setter functions are more type-safe,
taking argument as enum mbedtls_ssl_protocol_version:
mbedtls_ssl_conf_max_tls_version()
mbedtls_ssl_conf_min_tls_version()
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
This implies that when both TLS 1.2 and TLS 1.3
are included in the build all the TLS 1.2 tests
using the default configuration now go through
a version negotiation on the client side.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In TLS 1.3 key sharing is not restricted to key
exchange with certificate authentication. It
happens in the PSK and ephemeral key exchange
mode as well where there is no certificate
authentication.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The TLS server code only support TLS 1.2 thus simplify
the check of the version proposed by the client.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In ssl_tls.c, move mbedtls_ssl_set_calc_verify_md() under the
"if defined(MBEDTLS_SSL_PROTO_TLS1_2)" pre-processor directive
as it is specific to TLS 1.2.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ssl_cli.c and ssl_srv.c to reflect the fact
that they are TLS 1.2 specific now. Align there new
names with the TLS 1.3 ones.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The `psa_ssl_status_to_mbedtls` function is not only used for
cipher operations so transalte to TLS error codes.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
Send data (call to mbedtls_ssl_flush_output()) only from
the loop over the handshake steps. That way, we do not
have to take care of the partial writings (MBEDTLS_ERR_SSL_WANT_WRITE
error code) on the network in handshake step handlers.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
These fields need to be enabled for 1.3 even if MBEDTLS_USE_PSA_CRYPTO isn't (1.3 should always use PSA).
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
This can be used to validate the server's choice of group in the PSA
case (this will be done in the next commit).
Note that new function doesn't depend on ECP_C, as it only requires
mbedtls_ssl_get_groups(), which is always available. As a general rule,
functions for defining and enforcing policy in the TLS module should not
depend on low-level modules but work with TLS-level identifiers are much
as possible, and this new function follows that principle.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Align the alert type in parse_server_hello
Remove MBEDTLS_SSL_COOKIE_C guard
Enable cookie for both DTLS and TLS1.3
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Move reset transcript for hrr to generic
Reset SHA256 or SHA384 other than both
Rename message layer reset
Add check log for hrr parse successfully
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Fix library references, tests and programs.
Testing is performed in the already present all.sh test.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
As we have now a minimal viable implementation of TLS 1.3,
let's remove EXPERIMENTAL from the config option enabling
it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
"mbedtls_ssl_handshake_params: reorder fields to save code size" moved this
filed earlier along with byte-sized fields that should be in the 128-element
access window on Arm Thumb. This took away precious room in the 128-byte
window. Move it back further out.
Results (same architecture, config-suite-b.h + MBEDTLS_ECDH_LEGACY_CONTEXT +
MBEDTLS_ECP_RESTARTABLE):
library/ssl_cli.o: 2860 -> 2816 (diff: 44)
library/ssl_msg.o: 3080 -> 3076 (diff: 4)
library/ssl_srv.o: 3340 -> 3300 (diff: 40)
library/ssl_tls.o: 6546 -> 6478 (diff: 68)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Reorder fields mbedtls_ssl_handshake_params in order to save code on Arm
Thumb builds. The general idea is to put often-used fields in the direct
access window of 128 elements from the beginning of the structure.
The reordering is a human selection based on a report of field offset and
use counts, and informed by measuring the code size with various
arrangements. Some notes:
* This is the same reordering as the corresponding commit in #5189 for 2.2x.
* I moved most byte-sized fields at the beginning where they're sure to be
in the direct access window.
* I moved buffering earlier because it can be around the threshold depending
on the configuration, and it's accessed in a lot of places.
* I moved several fields, including update_checksum and friends, early so
that they're guaranteed to be in the early access window.
Results (arm-none-eabi-gcc 7.3.1, build_arm_none_eabi_gcc_m0plus build):
library/ssl_cli.o: 19763 -> 19687 (diff: 76)
library/ssl_msg.o: 24874 -> 24834 (diff: 40)
library/ssl_srv.o: 20754 -> 20562 (diff: 192)
library/ssl_tls.o: 21003 -> 20907 (diff: 96)
library/ssl_tls13_client.o: 7284 -> 7272 (diff: 12)
library/ssl_tls13_generic.o: 4749 -> 4721 (diff: 28)
library/ssl_tls13_keys.o: 5133 -> 5077 (diff: 56)
Results (same architecture, config-suite-b.h + MBEDTLS_ECDH_LEGACY_CONTEXT +
MBEDTLS_ECP_RESTARTABLE):
library/ssl_cli.o: 3000 -> 2936 (diff: 64)
library/ssl_msg.o: 3084 -> 3080 (diff: 4)
library/ssl_srv.o: 3428 -> 3400 (diff: 28)
library/ssl_tls.o: 6754 -> 6730 (diff: 24)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace bitfields mbedtls_ssl_handshake_params by bytes. This saves some
code size, and since the bitfields weren't group, this doesn't increase the
RAM usage.
Replace several ints that only store values in the range 0..255 by uint8_t.
This can increase or decrease the code size depending on the architecture
and on how the field is used. I chose changes that save code size on Arm
Thumb builds and will save more after field reordering.
Leave the bitfields in struct mbedtls_ssl_hs_buffer alone: replacing them by
uint8_t slightly increases the code size.
Results (arm-none-eabi-gcc 7.3.1, build_arm_none_eabi_gcc_m0plus build):
library/ssl_cli.o: 19759 -> 19763 (diff: -4)
library/ssl_srv.o: 20790 -> 20754 (diff: 36)
library/ssl_tls13_keys.o: 5153 -> 5133 (diff: 20)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ssl_conf_groups allows supported groups for key
sharing to be configured via their IANA NamedGroup ID.
This is added in anticipation of PQC and Hybrid key
sharing algorithms being integrated into Mbed TLS.
mbedtls_ssl_conf_curves is deprecated in favor of
mbedtls_ssl_conf_groups. handshake_init has been
modified to translate and copy curves configured
via conf_curves into a heap allocatied array of
NamedGroup IDs. This allows the refactoring of code
interacting with conf_curve related variables (such
as curve_list) to use NamedGroup IDs while retaining
the deprecated API.
Signed-off-by: Brett Warren <brett.warren@arm.com>
TLS1.3:add read ptr and handshake kex modes
CI merge job: only "Session resume using tickets, DTLS: openssl client" failed in one component thus CI can be considered as passed.
TLS 1.3: ServerHello: add utils functions used by ServerHello
Regarding the merge job, there was only one of the failure we currently encounter on almost all PR (Session resume using tickets, DTLS: openssl client test case see #5012) thus we can consider that this PR passed CI.
This function is one common function in generic file, get it from
the encrypted extension and submit one patch independently.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Base on version config, `handshack_{clinet,server}_step`
will call different step function. TLS1.3 features will
be gradully added base on it.
And a new test cases is added to make sure it reports
`feature is not available`.
Change-Id: I4f0e36cb610f5aa59f97910fb8204bfbf2825949
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Check configuration parameter in structure setup
function to make sure the config data is available
and valid.
Current implementation checks the version config.
Available version configs are
- tls1_3 only
- tls1_2 only
issues: #4844
Change-Id: Ia762bd3d817440ae130b45f19b80a2868afae924
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
The helper `mbedtls_ssl_write_handshake_msg` writes a handshake message
and updates the handshake transcript.
With TLS 1.3, we need finer control over the checksum: updating
at message granularity is not sufficient. To allow for manual maintenance
of the checksum in those cases, refine `mbedtls_ssl_write_handshake_msg()`
into `mbedtls_ssl_write_handshake_msg_ext()` which takes a parameter
determining whether the checksum should be updated.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
In TLS 1.2 specific code, the internal helper functions
ssl_populate_transform() builds an SSL transform structure,
representing a specific record protection mechanism.
In preparation for a subsequent commit which will introduce
a similar helper function specific to TLS 1.3, this commmit
renames ssl_populate_transform() to ssl_tls12_populate_transform().
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Also remove preprocessor logic for MBEDTLS_CONFIG_FILE, since
build_info.h alreadyy handles it.
This commit was generated using the following script:
# ========================
#!/bin/sh
git ls-files | grep -v '^include/mbedtls/build_info\.h$' | xargs sed -b -E -i '
/^#if !?defined\(MBEDTLS_CONFIG_FILE\)/i#include "mbedtls/build_info.h"
//,/^#endif/d
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
ssl_server2 had a check that we never try to use a minor version lower
than 2 with DTLS, but that check is no longer needed, as there's no way
that would happen now that MBEDTLS_SSL_MINOR_VERSION_1 is no longer
public.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit makes the API
- mbedtls_ssl_get_output_max_frag_len()
- mbedtls_ssl_get_input_max_frag_len()
- mbedtls_ssl_get__max_frag_len()
for querying the state of the Maximum Fragment Length
extension internal.
Rationale: The value those APIs provide to the user is in
upper bounds for the size of incoming and outgoing records,
which can be used to size application data buffers apporpriately
before passing them to mbedtls_ssl_{read,write}(). However,
there are other factors which influence such upper bounds,
such as the MTU or other extensions (specifically, the
record_size_limit extension which is still to be implemented)
which should be taken into account.
There should be more general APIs for querying the maximum
size of incoming and outgoing records.
For the maximum size of outgoing records, we already have such,
namely mbedtls_ssl_get_max_out_record_payload().
For the maximum size of incoming records, a new API will be
added in a subsequent commit.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Conflicts:
library/version_features.c
programs/test/query_config.c
Files were removed in development branch and modified by current branch.
Conflicts fixes by removing them.
