This is normally equivalent, but works even if some other header defines a
macro called warn_unused_result.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An empty expansion is possible, but as documented its effect is to disable
the feature, so that isn't a good example. Instead, use the GCC
implementation as the default: it's plausible that it could work even on
compilers that don't advertise themselves as sufficiently GCC-like to define
__GNUC__, and if not it gives users a concrete idea of what the macro is
supposed to do.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For all of these functions, the only possible failures are a hardware
accelerator (not possible unless using an ALT implementation), an internal
error or runtime corruption.
Exception: the self-tests, which serve little purpose if their status isn't
tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Define macros MBEDTLS_CHECK_RETURN_CRITICAL, MBEDTLS_CHECK_RETURN_TYPICAL
and MBEDTLS_CHECK_RETURN_OPTIONAL so that we can indicate on a
function-by-function basis whether checking the function's return value is
almost always necessary (CRITICAL), typically necessary in portable
applications but unnecessary in some reasonable cases (TYPICAL), or
typically unnecessary (OPTIONAL).
Update the documentation of MBEDTLS_CHECK_RETURN accordingly. This is split
between the user documentation (Doxygen, in config.h) and the internal
documentation (non-Doxygen, in platform_util.h, of minor importance since
the macro isn't meant to be used directly).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Declare all AES and DES functions that return int as needing to have
their result checked, and do check the result in our code.
A DES or AES block operation can fail in alternative implementations of
mbedtls_internal_aes_encrypt() (under MBEDTLS_AES_ENCRYPT_ALT),
mbedtls_internal_aes_decrypt() (under MBEDTLS_AES_DECRYPT_ALT),
mbedtls_des_crypt_ecb() (under MBEDTLS_DES_CRYPT_ECB_ALT),
mbedtls_des3_crypt_ecb() (under MBEDTLS_DES3_CRYPT_ECB_ALT).
A failure can happen if the accelerator peripheral is in a bad state.
Several block modes were not catching the error.
This commit does the following code changes, grouped together to avoid
having an intermediate commit where the build fails:
* Add MBEDTLS_CHECK_RETURN to all functions returning int in aes.h and des.h.
* Fix all places where this causes a GCC warning, indicating that our code
was not properly checking the result of an AES operation:
* In library code: on failure, goto exit and return ret.
* In pkey programs: goto exit.
* In the benchmark program: exit (not ideal since there's no error
message, but it's what the code currently does for failures).
* In test code: TEST_ASSERT.
* Changelog entry.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Put this macro before a function declaration to indicate that its result
must be checked. This commit supports GCC-like compilers and MSVC >=2012.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Also fiixed the following merge problems:
crypto_struct.h : Added MBEDTLS_PRIVATE to psa_aead_operation_s
members (merge conflict)
psa_crypto_aead.c : Added ciphertext_length to mbedtls_gcm_finish
call (change of API during development)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
The API reached 1.0.0 some time ago, and we've caught up with the
incompatible changes already.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Use the encoding from an upcoming version of the specification.
Add as much (or as little) testing as is currently present for Camellia.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This was already documented for mbedtls_md_info_t. Also document it for
mbedtls_pk_info_t (where it's fairly obvious since the structure is not
defined in a public header) and for mbedtls_cipher_info_t (where it's not
obvious since the structure is defined in a public header).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The structures mbedtls_x509_time, mbedtls_x509_crl_entry, mbedtls_x509_crl,
mbedtls_x509_crt, mbedtls_x509_san_other_name,
mbedtls_x509_subject_alternative_name, mbedtls_x509_csr are designed to
expose the result of parsing X.509 data. Document many of their fields as
being publicly readable.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The structures mbedtls_asn1_buf, mbedtls_asn1_bitstring,
mbedtls_asn1_sequence and mbedtls_asn1_named_data are designed to allow
access to data after parsing. Make their fields public.
Document that chaining fields are essentially read-only.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
On platforms with BSD-like sockets, it is useful for applications to have
access to the underlying file descriptor so that they can use functions like
select() and poll().
Do not promise that the field will exist on other platforms such as
Windows (where the type and name of the field are technically wrong because
Windows socket handles are actually not file descriptors).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add functions to read the type, mode, name and key_bitlen fields from
mbedtls_cipher_info_t. These are the fields that applications are most
likely to care about.
TLS code also uses iv_size and block_size, which it might make sense to
expose, but most applications shouldn't need those, so I'm not exposing them
for now.
Call the new functions in unit tests, so they're at least smoke-tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The whole point of this structure is to provide information, both for the
library's own sake and to applications.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
library/ccm.c
Conflict resolved by re-applying the MBEDTLS_BYTE_0 macro.
Conflict resolved by ignoring the MBEDTLS_PUT_UINT16_BE macro
used in development branch on the 'b' buffer, because the 'b'
buffer is removed in current branch.
The numerical identifier of the CID extension hasn't been settled yet
and different implementations use values from different drafts. Allow
configuring the value at compile time.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move logic to ccm_starts, ccm_set_lengths, ccm_update_ad,
ccm_update and ccm_finish
Use separate variable to track context state.
Encode first block only if both mbedtls_ccm_starts() and
mbedtls_ccm_set_lengths() were called.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Now that descriptions of error codes no longer have to be on the same line
for the sake of generate_errors.pl, move them to their own line before the
definition. This aligns them with what we do for other definitions, and
means that we no longer need to have very long lines containing both the C
definition and the comment.
```
perl -i -pe 's~^(#define +MBEDTLS_ERR_\w+ +-\w+) */\*[*!]<(.*)\*/~/**$2*/\n$1~' include/mbedtls/*.h
```
This commit does not change the output of generate_errors.pl.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instances of `mbedtls_ssl_session` represent data enabling session resumption.
With the introduction of TLS 1.3, the format of this data changes. We therefore
need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish
1.2 and 1.3 sessions.
This commit introduces such a TLS-version field to mbedtls_ssl_session.
The change has a few ramifications:
- Session serialization/deserialization routines need to be adjusted.
This is achieved by adding the TLS-version after the header of
Mbed TLS version+config, and by having the subsequent structure
of the serialized data depend on the value of this field.
The details are described in terms of the RFC 8446 presentation language.
The 1.2 session (de)serialization are moved into static helper functions,
while the top-level session (de)serialization only parses the Mbed TLS
version+config header and the TLS-version field, and dispatches according
to the found version.
This way, it will be easy to add support for TLS 1.3 sessions in the future.
- Tests for session serialization need to be adjusted
- Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3,
we will need to have some logic comparing the TLS version of the proposed session
to the negotiated TLS version. For now, however, we only support TLS 1.2,
and no such logic is needed. Instead, we just store the TLS version in the
session structure at the same point when we populate mbedtls_ssl_context.minor_ver.
The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and
`mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved.
However, with both fields being private and explicitly marked so, this can happen
in a later change.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Although checking if the key was symmetric was correct, its easier to
read if we just check the block length is not zero before we use it in a
division.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Enable Curve448 support
Add test vectors to evaluate
* RFC 7748
* a known-answer public key export test.
* a known-answer ECDH (X448) test.
Signed-off-by: Archana <archana.madhavan@silabs.com>
If PSA_CIPHER_ENCRYPT_OUTPUT_SIZE was called on a non symmetric key,
then a divide by zero could happen, as PSA_CIPHER_BLOCK_LENGTH will
return 0 for such a key, and PSA_ROUND_UP_TO_MULTIPLE will divide by the
block length.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fix initialization of mbedtls_psa_cipher_operation_t by not initializing the mbedtls_cipher_context_t typed field completely.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
