This is done to solve the problem with memory leak when pake abort status is forced. In this case the driver/build-in abort function was not executed.
After failure core clears the operation object and no successive abort call is possible.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Adapt pake test (passing NULL buffers is not allowed).
Passing the null buffer to psa_pake_output results in a hard fault.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
In the future key attributes will be available for opaque driver via psa_crypto_driver_pake_get_password_key().
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
- Add `alg` and `computation_stage` to `psa_pake_operation_s`.
Now when logic is moved to core information about `alg` is required.
`computation_stage` is a structure that provides a union of computation stages for pake algorithms.
- Move the jpake operation logic from driver to core. This requires changing driver entry points for `psa_pake_output`/`psa_pake_input` functions and adding a `computation_stage` parameter. I'm not sure if this solution is correct. Now the driver can check the current computation stage and perform some action. For jpake drivers `step` parameter is now not used, but I think it needs to stay as it might be needed for other pake algorithms.
- Removed test that seems to be redundant as we can't be sure that operation is aborted after failure.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
The mechanism of detecting unsupported ciphersuites
for OpenSSL client doesn't work on a modern OpenSSL.
At least, it fails on Travis CI which is installed
with OpenSSL 1.1.1f. So we need to skip ECDH cipher-
suites for O->m.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
This patch introduces the following changes:
* Documentation for `mbedtls_ecp_modulus_setup()`
moved to `ecp_invasive.h`.
* Added invalid modulus selector `MBEDTLS_ECP_MOD_NONE`.
* Adjusted negative tests to use invalid selectors.
* Reworded documentation.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
MBEDTLS_PSK_MAX_LEN main purpose is to determine
a miximum size for the TLS 1.2 pre-master secret.
This is not relevant to TLS 1.3 thus disable in
TLS 1.3 case the check against MBEDTLS_PSK_MAX_LEN
when setting during the handshake the PSK through
mbedtls_ssl_set_hs_psk(). This fixes the session
resumption with 384 bits PSKs when MBEDTLS_PSK_MAX_LEN
is smaller than that.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit add support to detect if openssl used for testing
supports static ECDH key exchange. Skip the ciphersutes if
openssl doesn't support them.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Previously calling get_num_ops more than once would have ended up with ops
getting double counted, and not calling inbetween completes would have ended up
with ops getting missed. Fix this by moving this to where the work is actually
done, and add tests for double calls to get_num_ops().
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
See docs/architecture/psa-migration/md-cipher-dispatch.md
Regarding testing, the no_md component was never very useful, as that's
not something people are likely to want to do: it was mostly useful as
executable documentation of what depends on MD. It's going to be even
less useful when more and more modules auto-enable MD_LIGHT or even
MD_C. So, recycle it to test the build with only MD_LIGHT, which is
something that might happen in practice, and is necessary to ensure that
the division is consistent.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
It was already marked as internal use only, and no longer used
internally. Also, it won't work when we dispatch to PSA.
Remove it before the MD_LIGHT split to avoid a corner case: it's
technically a hashing function, no HMAC or extra metadata, but we still
don't want it in MD_LIGHT really.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Comment originated from original version of this code, and the newer comment
which was added when it was pulled into a seperate function covers all cases.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
We do not need to expect to fail, running another complete in either sign or
verify after successful completion should also return BAD_STATE.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
If an error occurs, calling any function on the same operation should return
PSA_ERROR_BAD_STATE, and we were not honouring that for all errors. Add extra
failure tests to try and ratify this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
For sign and verify, the pointer passed in to the hash is not guaranteed to
remain valid inbetween calls, thus we need to store the hash in the
operation. Added a test to ensure this is the case.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Test for not having determnistic ECDSA was also being run when no ECDSA, and
this fails earlier. Fixed this and added a specific test for no ECDSA. Also
fixed (swapped) incorrect test descriptions.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Test for unsupported deterministic ECDSA was originally passing due to
incorrect code, fixing the code unfortunately broke the test.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Only 2 options were really possible anyway - complete in 1 op, or somewhere
between 2 and max ops. Anything else we cannot test due to implementation
specifics.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Make sure the number of ops is tested in the interruptible failure tests,
should they get through the interruptible loop part.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Ensure that num_ops is cleared when manual abort is called, but obviously not
when an operation just completes, and test this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
These tests check for failures, but can only fail where SIZE_MAX
exceeds some limit (UINT_MAX or UINT32_MAX) and do not fail
in this way otherwise - so guards are needed.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
The only remaining occurrences of TEST_ASSERT are now pointer comparison,
to NULL or to a reference md_info. That is, the output of the following
command is empty:
grep TEST_ASSERT tests/suites/test_suite_md.function |
egrep -v '= NULL|== md_info|md_info =='
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Since PSK cipher suites do not allow client certificate verification,
PSK test cases should be executed under VERIFY=NO. SUB_VERIFIES is
used to constrain verification option for PSK tests.
With aforementioned change, the latter check of
$VERIFY=YES && $TYPE!=PSK is redundant so it's removed.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
The contentInfo field of PKCS7 Signed Data structures can
optionally contain the content of the signature. Per RFC 2315
it can also contain any of the PKCS7 data types. Add test and
comments making it clear that the current implementation
only supports the DATA content type and the data must be empty.
Return codes should be clear whether content was invalid or
unsupported.
Identification and fix provided by:
- Demi Marie Obenour <demiobenour@gmail.com>
- Dave Rodgman <dave.rodgman@arm.com>
Signed-off-by: Nick Child <nick.child@ibm.com>
With the introduction of PSK_TESTS,
- Either `compat.sh -V NO` or `compat.sh -V YES` runs the PSK tests
- `compat.sh` or `compat.sh -V "NO YES"` runs PSK tests only once
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
There is no need to provide CA file in PSK. Thus VERIFY is
meaningless for PSK. This change omits the arguments passed to
the client and server for $VERIFY=YES.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
If the digest algorithm is not compiled into Mbedtls,
then any pkcs7 structure which uses this algorithm
should fail with MBEDTLS_ERR_PKCS7_INVALID_ALG.
Add test for this case.
Signed-off-by: Nick Child <nick.child@ibm.com>
MbedTLS CI uses python v3.5, f strings are not supported
until v3.6 . Remove f string's from generate_pkcs7_tests.py.
Signed-off-by: Nick Child <nick.child@ibm.com>
Not only was the size of 100 arbitrary, it's also not great for testing:
using MBEDTLS_MD_MAX_SIZE will get us an ASan error if it ever is too
small.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
For all test that want to use a hash, identify it by its numerical type
rather than a string. The motivation is that when we isolate the
MD-light subset from the larger MD, it won't have support for string
identifiers. Do the change for all tests, not just those that will
exercise functions in MD-light, for the sake of uniformity and because
numerical identifiers just feel better.
Note: mbedtls_md_info_from_string is still tested in md_info().
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
test_m32_xxx tests are x86 specific, but the support
function only identifies a 64-bit system. So the tests
will be run on arm64 host and cause a test failure.
This change restricts those tests to amd64/x86_64
only.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Previously, a loop in pkcs7_get_signers_info_set was not
getting covered by tests. This was because when there are
two or less signers, the loop will not execute.
Therefore, add new data files for another signer and use
three signers to generate a new pkcs7 DER file. Add a test
case to make sure that verification is still successfula and
use the test script to create ASN1 errors throoughout the
stucture:
./generate_pkcs7_tests.py ../data_files/pkcs7_data_3_signed.der
This results in the loop being executed.
Signed-off-by: Nick Child <nick.child@ibm.com>
Previously there were two test functions for verify.
One allowed for the verification of one certificate and
the other allowed for verification of two certificates.
Merge these two functions into one function that can take
any number of certificates as an argument.
Signed-off-by: Nick Child <nick.child@ibm.com>
Several PKCS7 invalid ASN1 Tests were failing due to extra
data bytes or incorrect content lengths going unnoticed. Make
the parser aware of possible malformed ASN1 data.
Signed-off-by: Nick Child <nick.child@ibm.com>
Add test calls to raw asn1 data with slight syntatical errors
Increases %branches covered from 70.4% to 87.7%.
Add a script which serves as documentation for how these new test
cases were generated:
./generate_pkcs7_tests.py ../data_files/pkcs7_data_cert_signed_sha256.der
./generate_pkcs7_tests.py ../data_files/pkcs7_data_multiple_signed.der
Signed-off-by: Nick Child <nick.child@ibm.com>
In the future, tests will be added which take in a char buffer
and buflen. Rather than duplicate code, have tests which
read from file and from buffer use the same helper function
Signed-off-by: Nick Child <nick.child@ibm.com>
Add a test to verify a hash which uses a different digest
algorithm than the one specified in the pkcs7.
Signed-off-by: Nick Child <nick.child@ibm.com>
Don't use external programs for string manipulation that the shell can do.
This makes the script a little faster (~10% when testing PSK).
For this commit, I only looked at code run in the innermost loop.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Python has a high startup cost, so go back to invoking it only once per
server start, rather than once per client start. This is a measurable
performance improvement (running time ~*0.5 with PSK, less dramatic with
asymmetric crypto).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We can detect PSK based on $TYPE. This allows more flexibility in how cipher
suites are spelled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Additionally fix the generation of test_csr_v3_all_malformed_extension_ns_cert_bitstream_tag.csr.der which was incorectly malformed.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
The fix_quasi_reduction function changed to static so checking the
invalid arguments are not needed anymore.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
Rename the function to 'fix_quasi_reduction' to better suite its functionality.
Also changed the name prefix to suite for the new module.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
In the python script I didn't use the word TODO because pylint doesn't
like that, but morally it's the same.
I removed the comment about "do we need a subset of compat.sh?" because
it turns out that `ssl-opt.sh` is already exercising all the key
exchanges:
% sed -n 's/.*force_ciphersuite=TLS-\([^ ]*\)-WITH.*/\1/p' tests/ssl-opt.sh | sort -u
DHE-PSK
DHE-RSA
ECDH-ECDSA
ECDHE-ECDSA
ECDHE-PSK
ECDHE-RSA
ECJPAKE
PSK
RSA
RSA-PSK
(the only omission is ECDH-RSA which is not of interest here and does
not actually differ from ECDH-ECDSA). So, we don't need a subset of
compat.sh because we're already getting enough testing from ssl-opt.sh
(not to mention test_suite_ssl).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The argument passed to translate_ciphers.py is calculated from $1 in
run_client instead of passed as third argument.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
These tests are not run in development because of the
overlapping !TLS_1_3 requirement and usage of full config.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The following shell command (requiring GNU grep) looks for algorithms and
key types, as well as IS and GET macros, that lack metadata tests:
```
for x in $(grep -Pho '(?<=^#define )PSA_(ALG|KEY_TYPE)_(?!CATEGORY_|NONE\b|\w+_(BASE|FLAG|MASK|CASE))\w+' include/psa/crypto_values.h include/psa/crypto_extra.h); do grep -qw $x tests/suites/test_suite_psa_crypto_metadata.* || echo $x; done
```
This may have false negatives: it only checks that the constants are
mentioned at least once, not that the tests are written correctly.
This has false positives:
* Types and algorithms that Mbed TLS does not support.
* PSA_ALG_ECDSA_IS_DETERMINISTIC, PSA_ALG_DSA_IS_DETERMINISTIC are peculiar
auxiliary macros that only apply to very specific algorithms and aren't
tested like the other IS macros.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add PSA_WANT_KEY_TYPE_PASSWORD and PSA_WANT_KEY_TYPE_PASSWORD_HASH to
psa/crypto_config.h, since the types PSA_KEY_TYPE_PASSWORD and
PSA_KEY_TYPE_PASSWORD_HASH are used by ECJPAKE.
The two key types are always enabled, like PSA_KEY_TYPE_DERIVE.
Add the key types to the metadata test suite as well.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename NotSupported to KeyTypeNotSupported, because it's only about testing
key management. For algorithms, not-supported is handled by OpFail.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This PR needs some change logs but there is a follow-up PR (issue #6935) that would change the change logs we would had here thus we will do them all while working on #6935.
Some of the tests use mbedtls_test_cli_key_rsa_der and
mbedtls_test_cli_crt_rsa_der, and these can be used with
specific ciphersuites.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Move translation of cipher suite names after filter_ciphersuites
so that filter is based on standard cipher suite names.
Furthermore, an additional flag is passed to run_client to
determine the type of translation of cipher suite names.
Therefore, client receives cipher suite names based on
its naming convention but the reporting output is still
the standard cipher suite names.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
With this commit, translate_ciphers.py would be based on standard
cipher suite names instead of MbedTLS naming convention.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
Since there is a plan to report and filter all cipher suite names
consistently, cipher suite names in compat.sh are changed to the
standard naming convention.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
This fixes the issue where excluding a file containing identifiers from checks would cause check_symbols_in_header to fail.
Signed-off-by: Aditya Deshpande <aditya.deshpande@arm.com>
Under Ubuntu-22.04, wait command prints out Terminated message.
Therefore server process is handled with identical ways like other
processes in compat.sh. In addition, PROCESS_ID is renamed as
SRV_PID to improve code readability.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
Under Ubuntu-22.04, wait command prints out Terminated message
if the process has been killed by kill command. This messes up
the output in compat.sh
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
Now the config dependencies used for ticket_flags
test cases are TLS 1.2 specified. Correct them to
MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_*
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
- added 2 new certificates: 1 for testing a serial which is full lenght
and another one for a serial which starts with 0x80
- added also proper Makefile and openssl configuration file to generate
these 2 new certificates
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Per gnutls anti replay issue, it needs millionsecond time delay for
improve the fail rate.
From test result of #6712, this can improve the fail rate from 4%
to 92%.
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Reject "weird" characters in text files, especially control characters that
might be escape sequences or that might cause other text to appear garbled
(as in https://trojansource.codes/).
Also reject byte sequences that aren't valid UTF-8.
Accept only ASCII (except most control characters), letters, some non-ASCII
punctuation and some mathematical and technical symbols. This covers
everything that's currently present in Mbed TLS ( §áèéëñóöüłŽ–—’“”…≥).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The part "driver: skipped/failed, reference: passed" didn't add any
information, but used up space on the screen and made the output
slightly harder to parse.
OTOH, now that we have multiple analyze_vs_reference tasks, we
should print out which one we're doing, so that that output makes sense
in case of a failure on the CI (which runs all tasks).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
It's a bit strange for tests/Makefile to clean up in library, but OTOH
it's also tests/Makefile that copies this file there.
Regardless, there was no place that cleaned up this file, and it needs to
be removed somewhere.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
For now, ignore test suites that don't have parity even is they should.
The purpose is just to prepare the infrastructure and map the work.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This is the basis for future work, we'll want to make sure everything
passes in this component.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Slightly re-organize (accel list at the top).
No need to disable USE_PSA or TLS 1.3 because they're already that way
in the default config.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Some PSA curves' symbols (PSA_WANT_) were not matching the corresponding
MBEDTLS_ECP_DP_. This was fixed together with the removal of extra code
when DEBUG_C is not enabled.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
mbedtls_test_psa_setup_key_derivation_wrap() returns 1 for success, 0
for error, so the test here was wrong.
This is just a hotfix in order to avoid a testing gap. Larger issues not
addressed here:
- I don't think we should just exit and mark the test as passed; if
we're not doing the actual testing this should be marked as SKIP.
- Returning 1 for success and 0 for failure is a violation of our
documented coding guidelines. We're also supposed to test with == 0 or
!= 0. Having consistent conventions is supposed to help avoid errors
like this.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Otherwise, in builds without PKSC1_V15, tests that are supposed to
accept the certificate will fail, because once the cert is OK they will
move on to checking the CRL and will choke on its non-PSS signature.
Tests that are supposed to reject the cert due to an invalid signature
from the CA will not check the CRL because they don't recognize the CA
as valid, so they have no reason to check the CA's CRL. This was hiding
the problem until the recent commit that added a test where the cert is
supposed to be accepted.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We've decided not to check it, see
https://github.com/Mbed-TLS/mbedtls/issues/5277
Also add a test that we accept the certificate with USE_PSA.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The code had an earlier version. Update to the new seed that
mpi_core_random_basic has moved to.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_mod_raw_random() and mbedtls_mpi_mod_random() were producing
output in the Montgomery representation, instead of obeying the
representation chosen in the modulus structure. Fix this.
Duplicate the test cases for mod-random output to have separate test cases
for each representation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This wasn't reported by pylint due to a pylint bug (apparently):
`pylint A B` doesn't complain about an unused import in B if A happens to
import and use the same module, which happens to be the case when we run
pylint on the CI.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These variables were both uses to select the default version of OpenSSL
to use for tests:
- when running compat.sh or ssl-opt.sh directly, OPENSSL_CMD was used;
- when running all.sh, OPENSSL was used.
This caused surprising situations if you had one but not the other set
in your environment. For example I used to have OPENSSL_CMD set but not
OPENSSL, so ssl-opt.sh was failing in some all.sh components but passing
when I ran it manually in the same configuration and build, a rather
unpleasant experience.
The natural name would be OPENSSL, and that's what set in the Docker
images used by the CI. However back in the 1.3.x days, that name was
already used in library/Makefile, so it was preferable to pick a
different one, hence OPENSSL_CMD. However the build system has not been
using this name since at least Mbed TLS 2.0.0, so it's now free for use
again (as demonstrated by the fact that it's been set in the CI without
causing any trouble).
So, unify things and use OPENSSL everywhere. Just leave an error message
for the benefit of developers which might have OPENSSL_CMD, not OPENSSL,
set in their environment from the old days.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Ideally the result of the generator would conform to the code style, but
this would be difficult, especially with respect to the placement of line
breaks in long logical lines. So, to avoid surprises when checking the style
of generated files (which happens in releases and in long-time support
branches), systematically skip generated files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Allow check_names.py to detect declarations of the form:
enum some_enum_name {
This pattern has only just appeared due to code style correction, which
explains why the issue was not previously noticed.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
The script was parsing the output from `make lcov` to extract numbers and
calculate percentages. But everything including the percentages is already
present in the output of `make lcov`, just with a slightly different
presentation. So replace all this by a simple extraction of the relevant
lines from the output of `make lcov`.
This is more robust than the previous code, which relied on `tail -n4` to
extract relevant lines, which broke when `make lcov` started to emit one
extra line at the end.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the basic/XXX=core test cases, use odd upper bounds, because the mod
version of random() only supports odd upper bounds (the upper bound is a
modulus and the mod modules only support odd moduli).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When including <test/bignum_helpers.h>, the library/ directory now needs to
be on the include path.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move bignum-related helper functions to their own files under tests/include
and tests/src. The primary motivation is that a subsequent commit will make
bignum_helpers.h include library/bignum*.h, but we want to be able to
include <test/helpers.h> without having the library directory on the include
path (we do this in some programs under programs/ intended for testing).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mpi_core_random_basic and mpi_random_values must generate the same random
sequences in order to get the expected test coverage (where we know we'll
hit certain numbers of retries). Facilitate this by defining the RNG seed
only once.
Fix the seed to explicitly list all 16 words of the key. This isn't strictly
required (missing initializer fields get the value zero), but it's clearer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is meant to adapt to the new library design in which
SHA224 and SHA256 can be built independently from each other.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is meant to adapt to the new library design in which
SHA384 and SHA512 can be built independently from each other.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Previously the same test was repeated twice.
Signed-off-by: Demi Marie Obenour <demiobenour@gmail.com>
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Tests are refactored to generate separate cases for 32-bit and 64-bit
limbs using arch_split. Duplicate arguments and branching in the test
function is removed.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
This is not new, it had always been the case, just not documented.
Pointed out by depends.py pkalgs (again, now that restartable is part of
full).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
muladd() (restartable or not) is only available when at least one short
weirstrass curve is enabled.
Found by depends.py curves (now that restartable is part of full).
Also, document that restartable only work for short weierstrass curves
(actually unrelated, but this made me think of that).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The previous commit declared that some tests cases in ssl-opt.sh depend
on USE_PSA being disabled, which is the right thing to do.
We had a check that forbade that - it was mainly meant to prevent
accidental re-introduction of such dependencies after we cleaned up a
number of cases where it was not warranted, but already at the time that
was controversial [1]. Now it's preventing us from doing the right
thing, so let's just remove it.
[1]: https://github.com/Mbed-TLS/mbedtls/pull/5742#discussion_r855112412
See also https://github.com/Mbed-TLS/mbedtls/pull/5907/ which also
removes this for a similar reason.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This fixes the two failures in test_suite_x509parse when both
ECP_RESTARTABLE and USE_PSA_CRYPTO are enabled.
The failure happened because the operation is dispatched to PSA when
restart is disabled (max_ops == 0).
Previously it was correct for this test function not to initialize PSA,
because it depends on ECP_RESTARTABLE which used to conflict with
USE_PSA_CRYPTO, but that's no longer the case.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The random-in-nrange test code has auxiliary functions that are common to all
the interfaces (core, mod_raw (upcoming), mod (upcoming), legacy), and does
some differential testing to check that all the layers consume the RNG in
the saame way. Test them all in the same test suite.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run the main test suites after running code style correction to check
that code style correction does not break these tests.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
It might not be obvious that this option goes beyond adding new
functions, but also automagically modifies the behaviour of TLS
in some circumstances. Moreover, the exact modifications and
circumstances were not documented anywhere outside the ChangeLog.
Fix that.
While at it, adjust the test that checks no restartable behaviour with
other key exchanges, to use a key exchange that allows cert-based client
authentication so that we can check that this is not restartable either.
We don't have any automated test checking that the server is never
affected. That would require adding an ec_max_ops command-line option to
ssl_server2 that never has any effect, just to check that it indeed
doesn't. I'm not sure that's worth it. I tested manually and could
confirm that the server never has restartable behaviour, even for the
parts that are shared between client and server such as cert chain
verification.
Note (from re-reading the code): all restartable behaviour is controlled
by the flag ssl->handshake->ecrs_enabled which is only client-side with
the ECDHE-ECDSA key exchange (TLS 1.2).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Test some cases where mbedtls_mpi_core_random() or mbedtls_mpi_random()
should return MBEDTLS_ERR_MPI_NOT_ACCEPTABLE. These test cases use a very
small range that makes the NOT_ACCEPTABLE case likely. The test code uses a
deterministic RNG whose implementation is in the test framework, so we know
that the tests will pass reproducibly unless the implementation the test
framework changes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function mpi_random_many() is the main function for testing the
get-random-in-range function. It validates that the random generator's
output is within the desired range, and performs some basic statistical
checks including checking that small ranges are covered exhaustively.
Switch this function from testing mbedtls_mpi_random() to testing
mbedtls_mpi_core_random(). This does not reduce the test coverage of
mbedtls_mpi_random() because the same properties are now validated
indirectly via mpi_random_values() which checks that mbedtls_mpi_random()
and mbedtls_mpi_core_random() produce identical values for identical inputs.
As of this commit, mpi_random_many() still uses some legacy mpi functions
internally because the corresponding functions don't exist yet in core.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For good cases, test that mbedtls_mpi_random() produces the same output as
mbedtls_mpi_core_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Compare a single-limb MPI with a multi-limb MPI. This is rather ad hoc, but
will be useful for mbedtls_mpi_core_random.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Added mixed cases:
- server using opaque password, while client not
- client using opaque password, while server not
Added a test with mismatched passwords in case both server and
client are using opaque passwords (the same test was already
present for the non-opaque case)
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is already covered by other already existing cases such as
"component_test_full_cmake_gcc_asan" which build with
"config.py full" and run all "ssl-opt.sh" test cases.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The commit "Preserve line breaks in comments before test functions"
only handled block comments. This commit handles line comments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When testing under Valgrind for constant flow, skip test suites that don't
have any constant-flow annotations, since the testing wouldn't do anything
more that testing with ordinary Valgrind (component_test_valgrind and
component_test_valgrind_psa). This is a significant time saving since
testing with Valgrind is very slow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is the first step in arranging that functions from constant_time.c are
tested in test_suite_constant_time.function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These are very CPU-intensive, so make it easy to skip them. And conversely,
make it easy to run them without the growing body of SSL tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
All builds using ASAN_CFLAGS were with Asan but no optimisation, making
them particularly slow. Indeed, we were overwriting CFLAGS which
defaults to -O2 and not using any -O in the replacement. (CMake already has
optimisations on with ASan.)
While at it, also remove -Wall -Wextra which are redundant as they are
already part of WARNING_CFLAGS which we are not overwriting.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
If the variable SKIP_TEST_SUITES is not defined with -D, but is defined
in an environment variable, tell cmake to get it from there.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Require equality for the number of limbs in the modulus and the residue.
This makes these functions consistent with residue_setup().
Signed-off-by: Janos Follath <janos.follath@arm.com>
The value was overwritten and the length wasn't used either. This latter
could have lead to a buffer overflow as well.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Test macros have goto instructions to the end where everything is freed.
We need to call init before that happens to make calling free functions
safe.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The external representation before included more than just endianness
(like reading in Mongtomery curve scalars or converting hashes to
numbers in a standard compliant way).
These are higher level concepts and are out of scope for Bignum and for
the modulus structure.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The external representation before included more than just endianness
(like reading in Mongtomery curve scalars or converting hashes to
numbers in a standard compliant way).
These are higher level concepts and are out of scope for Bignum and for
the modulus structure.
Passing endianness as a parameter is a step towards removing it from the
modulus structure.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The external representation before included more than just endianness
(like reading in Mongtomery curve scalars or converting hashes to
numbers in a standard compliant way).
These are higher level concepts and are out of scope for Bignum and for
the modulus structure.
Passing endianness as a parameter is a step towards removing it from the
modulus structure.
Signed-off-by: Janos Follath <janos.follath@arm.com>
In theory we could allow residues to have more allocated limbs than the
modulus, but we might or might not need it in the end.
Go for the simpler option for now and we can extend it later if we
really need it.
Signed-off-by: Janos Follath <janos.follath@arm.com>
We want to make sure that the value has at least as many limbs allocated
as the modulus as we need this to be able to do any operations in
constant time.
An invariant of the API is that the residue values are canonical, make
sure that the residue is compared to the entire modulus.
Signed-off-by: Janos Follath <janos.follath@arm.com>
This patch adjusts the I/O methods and the tests.
Documentation has also been updated to be more clear.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adjusts the logic of the size checking of the method,
and refactors the tests. Documentation has also been updated.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch is inverting the input type checking logic in the method,
in order to ensure that residue < modulus.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adds the following tests for the high levet IO api:
* mpi_mod_io_neg
* mpi_mod_io
Manually generated test data has also been included.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
CID is now enabled in the default config (as well as full), so it's
already tested in numerous all.sh components, not need to add one for
that.
We need a component for the legacy/compat option though as it's never
enabled in existing components. So, keep that one, but adjust the name
and fix a typo in a message.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We don't need to have two copies of the test with one of them depending
on legacy/compat CID: we can have just one copy, but make sure we run
ssl-opt.sh both in a build with standard CID and in a build with
legacy/compat - that's the job of all.sh (see next commit).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Per suggestion from Manuel, I removed this redundant test.
Signed-off-by: Hannes Tschofenig <hannes.tschofenig@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Added also extra text.
Signed-off-by: Hannes Tschofenig <hannes.tschofenig@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
OpenSSL may be configured to support features such as cipher suites or
protocol versions that are disabled by default. Enable them all: we're
testing, we don't care about enabling insecure stuff. This is not needed
with the builds of OpenSSL that we're currently using on the Jenkins CI, but
it's needed with more recent versions such as typically found on developer
machines, and with future CI additions.
The syntax to do that was only introduced in OpenSSL 1.1.0; fortunately we
don't need to do anything special with earlier versions.
With OpenSSL 1.1.1f on Ubuntu 20.04, this allows SHA-1 in certificates,
which is still needed for a few test cases in ssl-opt.sh. Curiously, this is
also needed for the cipher suite TLS-DHE-PSK-WITH-ARIA-128-GCM-SHA256 (and
no other, including other DHE-PSK or ARIA cipher suites).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
psa_cipher_encrypt() and psa_cipher_decrypt() sometimes add a zero offset to
a null pointer when the cipher does not use an IV. This is undefined
behavior, although it works as naively expected on most platforms. This
can cause a crash with modern Clang+ASan (depending on compiler optimizations).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test cases aim to mirror the legacy function, but needed the some
cases to be removed because:
- Null representation is not valid in core
- There are no negative numbers in core
- Bignum core doesn't do parameter checking and there are no promises for
even N
The _size variant of the test has been removed as bignum core doesn't do
parameter checking and there is no promises for inputs that are larger
than MBEDTLS_MPI_MAX_SIZE.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Now that we have a function that calls
mbedtls_mpi_core_ct_uint_table_lookup(), the compiler won't complain if
we make it static.
Signed-off-by: Janos Follath <janos.follath@arm.com>
- external errors are now checked in the specified point. If the
same error happens in another line, then this is not valid and
the test fails
- fixed some inconsistency in which injected error codes were not
taken from the data file. Now all the expected error code are
read from the data file
- added a couple of defines to shrink the code
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
As for ecjpake_setup(), now the test function can handle:
- "external" errors, through parameters set by the data file
- "internal" ones, through enums which inject ad-hoc failures
Similarly also ecjpake_rounds() can handle both type of errors,
but right now there's no erroneous case in the associated ".data"
file.
In both cases, after an error the current test is terminated.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Eventually we want it to be enabled by default
when TLS 1.3 is enabled but currently the
feature is on development thus it should not be
enabled by default.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Normally we need all the combinations, unique combinations make sense
only if the operation is commutative.
No changes to generated tests.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The class BaseTarget served two purposes:
- track test cases and target files for generation
- provide an abstract base class for individual test groups
Splitting these allows decoupling these two and to have further common
superclasses across targets.
No intended change in generated test cases.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Add a test case that would fail if all line comments were parsed before
block comments, and a test case that would fail if all block comments were
parsed before line comments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The value of the first sent signature algorithm is overwritten.
This test forces only a single algorithm to be sent and then
validates that the client received such algorithm.
04 03 is the expected value for SECP256R1_SHA256.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Now when operation holds pointer to dynamically allocated buffer for password key we can't do copy of the operation object in test instead we need to re-initialize operation object after error.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Looking for the .data file doesn't work in out-of-tree builds. Use the
.datax file instead. `make clean` removes all .datax files, so this resolves
the issue of executables not present on the current branch being left behind
after a branch change followed by a `make clean`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When x is the most negative value of a two's complement type,
`(unsigned_type)(-x)` has undefined behavior, whereas `-(unsigned_type)x`
has well-defined behavior and does what was intended.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Although negative zero is officially unsupported, we've had bugs related to
it in the past. So do test functions with a negative zero input.
There will likely be cases where we don't want to accept negative zero as if
it was valid, because it's too hard to handle. We'll add exceptions on a
case by case basis.
For the functions that are currently tested by the generated tests, the new
test cases pass.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The bignum module does not officially support "negative zero" (an
mbedtls_mpi object with s=-1 and all limbs zero). However, we have a
history of bugs where a function that should produce an official
zero (with s=1), produces a negative zero in some circumstances. So it's
good to check that the bignum functions are robust when passed a negative
zero as input. And for that, we need a way to construct a negative zero
from test case arguments.
There are checks that functions don't produce negative zeros as output in
the test suite. Skip those checks if there's a negative zero input: we
don't want functions to _create_ negative zeros, but we don't mind if
they _propagate_ negative zeros.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is to ensure that the MbedTLS based implementation of EC-JPAKE
is compatible with the PSA crypto one
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The already existing "x509_csr_check()" function is extended in order
to support/test also CSR's extensions. The test is performed by
adding an extended key usage.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add fields to mbedtls_ssl_context
Add write early data indication function
Add check whether write early data indication
Add early data option to ssl_client2
Add test cases for early data
Signed-off-by: Xiaokang Qian <xiaokang.qian@arm.com>
Fix error in memory allocation in test code, which was triggering an
error in test_memory_buffer_allocator.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
A core MPI must have at least 1 limb. We can no longer test with 0 limbs,
and we don't need to anyway, so don't try.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This way static analyzers have a chance of knowing we don't expect the
bignum functions to support empty inputs. As things are, Coverity keeps
complaining about it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of corrupting the public key part of the message,
corrupt the proof part. A proof is conceptually similar to a signature,
and changing anything in it should make it invalid with
a high probability.
Also, instead of shifting data, perform a bitflip.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The PSA_CRYPTO_C is excluded from typo check for the following
false negative report:
```
> include/mbedtls/check_config.h:329: 'PSA_CRYPTO_C' looks like a typo. It
was not found in any macros or any enums. If this is not a typo, put //no-
check-names after it.
|
329 | * Note: ECJPAKE_C depends on MD_C || PSA_CRYPTO_C. */
| ^^^^^^^^^^^^
```
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
This macro is expected to be defined out of the library, and there
is no definition in the library. Thus it needs to be excluded from
typo check.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Typos of PSA macro and enum names are not checked by check_names.py.
This commit extend the check list to include PSA_XXX references.
The words should be macro/enum names defined as public_macros,
internal_macros, private_macros and enums. This commit alse extend
the scope of enums to include those are defined in library/*.c.
A new type of macros "private", which are defined in library/*.c was
also added.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Add component_test_psa_config_accel_ecdh to all.sh to test key agreement driver wrapper with libtestdriver1.
Signed-off-by: Aditya Deshpande <aditya.deshpande@arm.com>
Looking for executables causes problems with leftover compiled test
suites from other branches when we forget to run make clean before
switching branches. Using the .data files is more robust as most of them
are tracked, so will be removed when switching branches.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
For the benefit of auto-formatting tools, move from the '$placeholder'
templating syntax to a new syntax of the form:
__MBEDTLS_TEST_TEMPLATE__PLACEHOLDER
This change allows the test code template to be almost entirely valid C.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Windows tests are failing pkcs7 verification due to differnt line
endings. Therefore, add make instuctions for building the data
files with Windows EOF instead. As a result, regenerate other data
files so that verification works.
Add these CRLF EOF files to the exception in check_files to ignore
the line endings.
Signed-off-by: Nick Child <nick.child@ibm.com>
Legacy Bignum is excluded as it doesn't get regular extensions like new
ones.
Each slot uses comments of their respective filetype. Since .data files
don't have a syntax for comments, dummy test cases are used. (These test
cases will never be executed and no noise will be added to tests.)
Signed-off-by: Janos Follath <janos.follath@arm.com>
I ran into a sequence where the assertion `stats[8] > 0` failed for the
range 1..272 with 100 iterations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Turn mpi_fill_random_internal() into mbedtls_mpi_core_fill_random(). It
had basically the right code except for how X is passed to the function.
Write unit tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* component_test_tls13_with_padding: just explicitly sets some options that
are identical with full.
* component_test_tls13_with_ecp_restartable: redundant since TLS 1.3 doesn't
have any support for restartable ECC.
* component_test_tls13_with_everest: not useful since TLS 1.3 doesn't call
ECDH directly, it just relies on the PSA abstraction.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_build_psa_accel_alg_ecdsa is subsumed by
component_test_psa_crypto_config_accel_ecdsa, which has the same
configuration and additionally runs the unit tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_TEST_HOOKS is not supposed to change the behavior of the library, so
it's generally good to have it on in functional tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This patch updates the tests `mpi_mod_raw_cond_swap()` &
`mpi_mod_raw_cond_assign()` to use a non-zero modulus
when invoking `mbedtls_mpi_mod_modulus_setup()`
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch addresses more review comments, and fixes
a circular depedency in the `mbedtls_mpi_mod_modulus_setup()`.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch addresses review comments with regards to style of
`mbedtls_mpi_mod_modulus_setup/free()`.
It also removes a test check which was triggering a use-after-free.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch updates the `mpi_mod_setup()` test suite
to check for incosistencies in the montgomery constant
data's lifecycle.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
Ensure MBEDTLS_SSL_DTLS_CONNECTION_ID and MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT
are unset when MBEDTLS_SSL_PROTO_DTLS is not set in tls13-only tests.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Also remove compat tests from reference component as results from this run are not included in outcome file.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Ensure MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT is unset where
MBEDTLS_SSL_DTLS_CONNECTION_ID is unset.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Use a dictionary to specify optional parameters for each task.
If the task is not specified then all tasks are executed.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
curves.pl, depends-hashes.pl, key-exchanges.pl and depends-pkalgs.pl are now superseded by depends.py.
Update all references to them accordingly.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
It's not needed as a feature. It gets reenabled automatically in
build_info.h like pk_write and pk_parse, but that's an implementation
detail.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the PSK exchange modes extension declare first
PSK ephemeral if we support both PSK ephemeral
and PSK. This is aligned with our implementation
giving precedence to PSK ephemeral over pure PSK
and improve compatibility with GnuTLS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This patch moves the following tests to test_suite_bignum_core:
* `mbedtls_mpi_core_get_mont_r2_unsafe_neg()`
* `mbedtls_mpi_core_get_mont_r2_unsafe()`
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adds the test for the method calculating the RR. The input/expected
data are generated manually using the following Python3 snippet:
~~~~~
import math
title="mpi_get_montgomery_constant_unsafe"
tt = title + " #{}"
in_data = [ "0f", ... ]
def limb_no(number, bil=64):
return int(math.ceil(int.bit_length(number)/(bil * 1.0)))
def calc_rr(number, bil=64 ):
return '{:x}'.format(pow(pow(2, limb_no(number, bil) * bil), 2, number))
def calc_rr_str(number, prefix=""):
rr64 = calc_rr(number)
rr32 = calc_rr(number, bil=32)
return '{}:"{:x}":"{}":"{}"'.format(prefix,number, rr32, rr64)
print("\n\n".join(["{}\n{}".format(tt.format(in_data.index(v)+1), calc_rr_str(int(v,base=16), title)) for v in in_data]))
~~~~~
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
Simplify TLS 1.3 dependencies taking into
account that
MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
implies that MBEDTLS_SSL_PROTO_TLS1_3 is
defined.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
