Eventually we want it to be enabled by default
when TLS 1.3 is enabled but currently the
feature is on development thus it should not be
enabled by default.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Normally we need all the combinations, unique combinations make sense
only if the operation is commutative.
No changes to generated tests.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The class BaseTarget served two purposes:
- track test cases and target files for generation
- provide an abstract base class for individual test groups
Splitting these allows decoupling these two and to have further common
superclasses across targets.
No intended change in generated test cases.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Add a test case that would fail if all line comments were parsed before
block comments, and a test case that would fail if all block comments were
parsed before line comments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Looking for the .data file doesn't work in out-of-tree builds. Use the
.datax file instead. `make clean` removes all .datax files, so this resolves
the issue of executables not present on the current branch being left behind
after a branch change followed by a `make clean`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Although negative zero is officially unsupported, we've had bugs related to
it in the past. So do test functions with a negative zero input.
There will likely be cases where we don't want to accept negative zero as if
it was valid, because it's too hard to handle. We'll add exceptions on a
case by case basis.
For the functions that are currently tested by the generated tests, the new
test cases pass.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is to ensure that the MbedTLS based implementation of EC-JPAKE
is compatible with the PSA crypto one
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The PSA_CRYPTO_C is excluded from typo check for the following
false negative report:
```
> include/mbedtls/check_config.h:329: 'PSA_CRYPTO_C' looks like a typo. It
was not found in any macros or any enums. If this is not a typo, put //no-
check-names after it.
|
329 | * Note: ECJPAKE_C depends on MD_C || PSA_CRYPTO_C. */
| ^^^^^^^^^^^^
```
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
This macro is expected to be defined out of the library, and there
is no definition in the library. Thus it needs to be excluded from
typo check.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Typos of PSA macro and enum names are not checked by check_names.py.
This commit extend the check list to include PSA_XXX references.
The words should be macro/enum names defined as public_macros,
internal_macros, private_macros and enums. This commit alse extend
the scope of enums to include those are defined in library/*.c.
A new type of macros "private", which are defined in library/*.c was
also added.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Add component_test_psa_config_accel_ecdh to all.sh to test key agreement driver wrapper with libtestdriver1.
Signed-off-by: Aditya Deshpande <aditya.deshpande@arm.com>
Looking for executables causes problems with leftover compiled test
suites from other branches when we forget to run make clean before
switching branches. Using the .data files is more robust as most of them
are tracked, so will be removed when switching branches.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
For the benefit of auto-formatting tools, move from the '$placeholder'
templating syntax to a new syntax of the form:
__MBEDTLS_TEST_TEMPLATE__PLACEHOLDER
This change allows the test code template to be almost entirely valid C.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Windows tests are failing pkcs7 verification due to differnt line
endings. Therefore, add make instuctions for building the data
files with Windows EOF instead. As a result, regenerate other data
files so that verification works.
Add these CRLF EOF files to the exception in check_files to ignore
the line endings.
Signed-off-by: Nick Child <nick.child@ibm.com>
* component_test_tls13_with_padding: just explicitly sets some options that
are identical with full.
* component_test_tls13_with_ecp_restartable: redundant since TLS 1.3 doesn't
have any support for restartable ECC.
* component_test_tls13_with_everest: not useful since TLS 1.3 doesn't call
ECDH directly, it just relies on the PSA abstraction.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_build_psa_accel_alg_ecdsa is subsumed by
component_test_psa_crypto_config_accel_ecdsa, which has the same
configuration and additionally runs the unit tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_TEST_HOOKS is not supposed to change the behavior of the library, so
it's generally good to have it on in functional tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Also remove compat tests from reference component as results from this run are not included in outcome file.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Ensure MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT is unset where
MBEDTLS_SSL_DTLS_CONNECTION_ID is unset.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Use a dictionary to specify optional parameters for each task.
If the task is not specified then all tasks are executed.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
curves.pl, depends-hashes.pl, key-exchanges.pl and depends-pkalgs.pl are now superseded by depends.py.
Update all references to them accordingly.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
It's not needed as a feature. It gets reenabled automatically in
build_info.h like pk_write and pk_parse, but that's an implementation
detail.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove requires_key_exchange_with_cert_in_tls12_enabled
and use `requires_any_configs_enabled` directly instead.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
instead of MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED to guard
code specific to the TLS 1.3 ephemeral key exchange mode.
Use it also for the dependencies of TLS 1.3 only tests
relying on ephemeral key exchange mode, but for
tests in tls13-kex-modes.sh where the change is done
later using all
MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_.*ENABLED macros.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add TLS 1.3 specific configuration options
to enable/disable the support for TLS 1.3
key exchange modes.
These configurations are introduced to
move away from the aforementioned
enablement/disablement based on
MBEDTLS_KEY_EXCHANGE_xxx_ENABLED options
that relate to group of TLS 1.2
ciphersuites.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
It just got renamed, and it's also not the most canonical example since it's
a somewhat deprecated interface. Make a different module the example.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Align the name of the bignum test suite with the source module (which was
renamed from mpi.c to bignum.c in the PolarSSL 1.x days). This also brings
it into line with the test suites for the low-level bignum interfaces.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Many bignum tests have multiple calculated result values, so return
these as a list, rather than formatting as a string.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Separate file is added for classes used to generate cases for tests
in bignum_core.function. Common elements of the BignumOperation class
are added to classes in a new common file, for use across files.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
When building SHA512 without SHA384,
there are some code paths that resulted
in unused variables or usage of undefined code.
This commit fixes that.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The test coverage reduction introduced in
dc25cee lowered the coverage of hash tests
due to intertwining dependencies.
This commit introduces a new class for building
a domain using both the complementary
and exclusive classes.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Disable exclusive jobs that run with a single
config disabled. A lot more bugs should be found by running jobs with only one config
of a family enabled.
This will also lessen the burden on the CI.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Remove old and add new dependencies.
Introduce a way to handle non-trivial problems
stemming from exclusive group testing.
Exclude SHA256 and SHA512, as these are tested
in SHA224 and SHA384 jobs, respectively.
Change config.h to mbedtls_config.h).
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Add a domain for cipher base algorithms (block permutations and stream
ciphers), a domain for block cipher chaining modes and a domain for
block cipher padding modes.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Start each job from the full config minus some memory management
settings and the job-specific settings.
The original content of config.h no longer influences the
configurations used for the jobs (but it still influences what jobs
may run, in that the set of jobs is partly built by parsing #define
and //#define lines in config.h).
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Unify curves.pl, key-exchanges.pl, depends-pkalgs.pl and
depends-hashes.pl into a single, newly-written script.
For curves, key exchanges and hashes, in addition to testing
all-but-one settings in the group like the old scripts, also run the
tests with a single option in the group.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Remove SHA256 dependencies from tests, fix incorrect boolean logic in
check_config, and change depends_hashes.pl to disable LMS in one test
Signed-off-by: Raef Coles <raef.coles@arm.com>
MBEDTLS_SSL_TICKET_C depends now on: MBEDTLS_GCM_C || MBEDTLS_CCM_C || MBEDTLS_CHACHAPOLY_C.
All features are disabled in this config.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
PSA crypto currently needs MBEDTLS_PK_PARSE_C to parse RSA keys to do almost
anything with them (import, get attributes, export public from private, any
cryptographic operations). Force it on, for symmetry with what we're doing
for MBEDTLS_PK_WRITE_C. Fixes#6409.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Disable non-crypto features that can't be called through the PSA API, as
well as algorithms that have no PSA interface.
This serves as a non-regression test for #6408 and #6409.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In verbose mode, the full output of each failing suite is printed out,
which for some suites runs in the 1000s of lines. If you didn't redirect
output to a file, this is a lot to scroll and can make it hard to
quickly identify which test suites failed.
So, let's print out that information at the end. This is useful
information for starting to figure out what went wrong.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Both functions are calling mbedtls_cipher_auth_[encrypt/decrypt]_ext() functions. These functions are guarded with MBEDTLS_CIPHER_MODE_AEAD || MBEDTLS_NIST_KW_C flags - make it consistent.
As a result ssl_server2 won't build now with MBEDTLS_SSL_SESSION_TICKETS enabled (mbedtls_cipher_auth_[encrypt/decrypt]_ext() functions not available).
Mark MBEDTLS_SSL_SESSION_TICKETS as dependent on MBEDTLS_CIPHER_MODE_AEAD || MBEDTLS_NIST_KW_C and disable MBEDTLS_SSL_SESSION_TICKETS in stream cipher only build.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Stating from the default config means a few things are implicitly
excluded; starting from the full config makes it all fully explicit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
When pylint runs in parallel, it loses the ability to detect duplicated code
across modules. Duplicated code is usually a bad thing, so give pylint the
opportunity to let us know.
This makes pylint slightly slower, but going from 2 threads to 1 does not
make it anywhere close to twice as slow. On my machine, with Python 3.5,
pylint -j2 takes about 12s while single-threaded pylint takes about 16s
of wall clock time.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We had 4 identical copies of the check_repo_path function. Replace them by a
single copy in the build_tree module where it naturally belongs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_vsnprintf replacement works like mbedtls_snprintf replacement, so
copy the requirements for MBEDTLS_PLATFORM_VSNPRINTF_ALT.
(MBEDTLS_PLATFORM_xxx_MACRO shouldn't require MBEDTLS_PLATFORM_C, but that's
a separate preexisting problem which I do not try address at this time.)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We have Python code both for test code generation
(tests/scripts/generate_test_code.py) and now for test data generation.
Avoid the ambiguous expression "test generation".
This commit renames the Python module and adjusts all references to it. A
subsequent commit will adjust the documentation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Previous changes used the docstring of the test_generation module,
which does not inform a user about the script.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Don't look for MBED keywords on the autogenerated
psa_crypto_driver_wrappers.c file. This is needed since the naming of
constants is dependent on the driver json and the naming conventions
used through the library is stuck at a place where it does not swing
either way ( mbedtls_ / psa_).
Signed-off-by: Archana <archana.madhavan@silabs.com>
Signed-off-by: Asfandyar Orakzai <asfandyar.orakzai@silabs.com>
Wrapper function for itertools.combinations_with_replacement, with
explicit cast due to imprecise typing with older versions of mypy.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
The DTLS 1.2 CID specification has been published as RFC 9146. This PR updates the implementation to match the RFC content.
Signed-off-by: Hannes Tschofenig <hannes.tschofenig@arm.com>
BaseTarget-derived targets are now added to TestGenerator.targets in
initialization. This reduces repeated code in generate_xxx_tests.py
scripts which use this framework.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
When generating combinations of values, `itertools.combinations` will
not allow inputs to be repeated. This is replaced so that cases where
input values match are generated, i.e. ("0", "0").
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Other programs/*/Makefile are only created by CMake, but programs/fuzz has
its own Makefile in the repository. Fixes#6247.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Version of pylint used in CI does not recognize abstract subclasses of
BaseTarget, so disable warning in these abstract classes.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Previous implementation mixed the test case generation and the
recursive generation calls together. A separate method is added to
generate test cases for the current class' test function. This reduces
the need to override generate_tests().
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Previously MD_C was auto-enabled based on the fact that ALG_RSA_PSS was
requested, but that's no longer the case since the previous commit.
We can fix this in one of two ways: either enable MD_C, or enable all
the PSA_WANT_ALG_SHA_xxx that are needed for test. Go for MD_C because
it's a single line and avoids having to enumerate a list that might grow
in the future.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Test coverage not there yet, as the entire test_suite_pkcs1_v21 is
skipped so far - dependencies to be adjusted in a future commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Internal macros are not present as symbols, visible or usable outside
the compilation unit and it is safe to allow them to have a name without
namespace prefix.
We also allow them to start with lower case letters as some of our
internal macros already have names like that.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Adds python script for generation of bignum test cases, with initial
classes for mpi_cmp_mpi test cases. Build scripts are updated to
generate test data.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
The test script all.sh contains the component
component_build_armcc
testing that Mbed TLS builds using Arm Compiler 5 and 6,
on a variety of platforms.
However, the component does not exercise inline assembly
for Arm, since
- MBEDTLS_HAVE_ASM is unset, and
- Some Arm inline assembly is only used if the level of
optimization is not 0.
This commit changes the test component to ensure that
inline assembly is built by setting MBEDTLS_HAVE_ASM
as well as enabling optimization level 1 (-O1).
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
test_suite_pk still passes, with the same number of skipped tests as in
the default config minus PKCS#1v2.1
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently the test suites are passing because a lot of tests
functions/cases explicitly depend on SHAxxx_C, resulting in them being
skipped in this build. The goal of the next few commits is going to make
them pass and achieve test parity with a non-accelerated build for
selected modules.
Note: compared to the previous component, I'm using 'make tests' not
'make' (ie not building program) because I'm betting build failures
(some header not found) in programs which are not my interest atm.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add a platform function mbedtls_setbuf(), defaulting to setbuf().
The intent is to allow disabling stdio buffering when reading or writing
files with sensitive data, because this exposes the sensitive data to a
subsequent memory disclosure vulnerability.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Update to a branch with a fix for the test case
"expected error for psa_raw_key_agreement - Small buffer size"
since we just fixed the corresponding bug.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remaining hits seem to be hex data, certificates,
and other miscellaneous exceptions.
List generated by running codespell -w -L
keypair,Keypair,KeyPair,keyPair,ciph,nd
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Remove no_supported HMAC generate/import tests when !PSA_KEY_TYPE_HMAC as HMAC key creation works regardless of PSA_WANT_KEY_TYPE_HMAC.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
component_test_cmake_out_of_source was running the ssl-opt.sh test case
"Fallback SCSV: beginning of list", but this test case was removed in Mbed
TLS 3.0, so ssl-opt.sh was running nothing, which is not an effective test.
In 2.x, the test case was chosen because it uses an additional auxiliary
program tests/scripts/tcp_client.pl. This auxiliary program is no longer
used. So instead, run at least one test case that's sure to exist.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, len) == aead_alg` when
`len == PSA_AEAD_TAG_LENGTH(aead_alg)`. So skip this case when testing
the printing of constants.
This fixes one test case due to the way arguments of
`PSA_ALG_AEAD_WITH_SHORTENED_TAG` are enumerated (all algorithms are tested
for a value of `len` which isn't problematic, and all values of `len` are
tested for one algorithm).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There's nothing wrong with ECC keys on Brainpool curves,
but operations with them are very slow. So we only exercise them
with a single algorithm, not with all possible hashes. We do
exercise other curves with all algorithms so test coverage is
perfectly adequate like this.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
RSA-OAEP requires the key to be larger than a function of the hash size.
Ideally such combinations would be detected as a key/algorithm
incompatibility. However key/algorithm compatibility is currently tested
between the key type and the algorithm without considering the key size, and
this is inconvenient to change. So as a workaround, dispense
OAEP-with-too-small-hash from exercising, without including it in the
automatic operation-failure test generation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In key read tests, add usage flags that are suitable for the key type and
algorithm. This way, the call to exercise_key() in the test not only checks
that exporting the key is possible, but also that operations on the key are
possible.
This triggers a number of failures in edge cases where the generator
generates combinations that are not valid, which will be fixed in subsequent
commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This currently makes all the descriptions unambiguous even when truncated at
66 characters, as the unit test framework does.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The output of generate_psa_tests.py is almost unchanged: the differences are
only spaces after commas (now consistently omitted).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When generating storage format tests, pass usage flags around as a list, and
format them as the last thing.
In Storagekey(), simplify the addition of implicit usage flags: this no
longer requires parsing.
The output is unchanged.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the generated storage format test cases, cover all supported
algorithms for each key type. This is a step towards exercising
the key with all the algorithms it supports; a subsequent commit
will generate a policy that permits the specified algorithms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use the new generic is_public method.
Impact on generated cases: there are new HMAC test cases for SIGN_HASH. It
was a bug that these test cases were previously not generated.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`curves.pl` (invoked by `all.sh test_depends_curves`, and
`all.sh test_depends_curves_psa`) currently runs two series of tests:
* For each curve, test with only that curve enabled.
* For each curve, test with all curves but that one.
Originally this script was introduced to validate test dependencies, and for
that all-but-one gives better results because it handles test cases that
require multiple curves. Then we extended the script to also test with a
single curve, which matches many real-world setups and catches some product
bugs. Single-curve testing also validates test dependencies in a more
limited way.
Remove all-but-one curve testing, because it doesn't add much to the test
coverage. Mainly, this means that we now won't detect if a test case
declares two curve dependencies but actually also depends on a third. This
is an acceptable loss.
The trigger for removing all-but-one curve testing is that this will make
the job take only about half as long, and the length of the job was a bit of
a problem. Resolves#5729.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_test_CID_no_debug was added specifically to be a non-regression
test for https://github.com/Mbed-TLS/mbedtls/issues/3998. Running compat.sh
in the newly introduced config-ccm-psk-dtls1_2.h is also a non-regression
test for that bug. Therefore component_test_CID_no_debug is redundant for
its primary purpose.
Of course every configuration is different, but the additional coverage from
component_test_CID_no_debug is minimal, unlike config-ccm-psk-dtls1_2.h
which is a plausible real-world configuration.
In mbedtls-2.28, component_test_CID_no_debug was never added, and running
the unit tests in that configuration does not trigger the #3998 bug, only
compat.sh does. So, rather than backport component_test_CID_no_debug to
2.28.2, I am removing it from 3.2.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It no longer makes sense, either in -e or -f: those ciphersuites have
been removed anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
mbedtls/mbedtls_config.h (formerly mbedtls/config.h) used to be included
directly in many places, so we wanted to test that all of these places
allowed the MBEDTLS_CONFIG_FILE override. Now mbedtls/mbedtls_config.h is
only included via build_info.h, so this is not relevant anymore.
It is no longer particularly useful to test MBEDTLS_CONFIG_FILE with the
full config, but it isn't harmful either, so keep it that way.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When running check-generated-files in update mode, all generated files were
regenerated. As a consequence,
```
tests/scripts/check-generated-files.sh -u && make
```
always caused most of the code to be rebuilt. Now, if a file hasn't changed,
preserve its original modification time (and other metadata), so the command
above doesn't rebuild anything that has actually not changed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For TLS 1.3 tests, do not force TLS 1.3
version on client to play the negotiation
game whenever possible.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This implies that when both TLS 1.2 and TLS 1.3
are included in the build all the TLS 1.2 tests
using the default configuration now go through
a version negotiation on the client side.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ssl_cli.c and ssl_srv.c to reflect the fact
that they are TLS 1.2 specific now. Align there new
names with the TLS 1.3 ones.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add all of the group pairs for hrr cases
Re-order some parameters
Change-Id: Id7e131d1ed4279bbd586613800df7bd87dfa4c54
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Change run title
Remove dedicate ciphersuite and sig alg
Update test cases
Change-Id: Ic0e9adf56062e744f7bafbc6bb562baeaafd89f0
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Integrate two options into one
Use one dedicate cipher suite TLS_AES_256_GCM_SHA384
Use on dedicate signature algorithm ecdsa_secp384r1_sha384
Change-Id: Icbe39b985e1942edc4b1e37ce3352eed4f316ab7
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Provide an additional pair of #defines, MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
and MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY. At most one of them may be
specified. If used, it is necessary to compile with -march=armv8.2-a+sha3.
The MBEDTLS_SHA512_PROCESS_ALT and MBEDTLS_SHA512_ALT mechanisms
continue to work, and are mutually exclusive with SHA512_USE_A64_CRYPTO.
There should be minimal code size impact if no A64_CRYPTO option is set.
The SHA-512 implementation was originally written by Simon Tatham for PuTTY,
under the MIT licence; dual-licensed as Apache 2 with his kind permission.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
The test suite test_suite_psa_crypto_op_fail now runs a large number
of automatically generated test cases which attempt to perform a
one-shot operation or to set up a multi-part operation with invalid
parameters. The following cases are fully covered (based on the
enumeration of valid algorithms and key types):
* An algorithm is not supported.
* The key type is not compatible with the algorithm (for operations
that use a key).
* The algorithm is not compatible for the operation.
Some test functions allow the library to return PSA_ERROR_NOT_SUPPORTED
where the test code generator expects PSA_ERROR_INVALID_ARGUMENT or vice
versa. This may be refined in the future.
Some corner cases with algorithms combining a key agreement with a key
derivation are not handled properly. This will be fixed in follow-up
commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test that hash operation functions fail when given a hash algorithm
that is not supported or an algorithm that is not a hash.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The new test suite psa_crypto_op_fail is intended for systematically
generated test cases that ensure that cryptographic operations with
invalid parameters fail as expected. I intend invalid parameters to
cover things like an invalid algorithm, an algorithm that is
incompatible with the operation, a key type that is incompatible with
the algorithm, etc.
This commit just creates the infrastructure. Subsequent commits will
add data generation and test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generate "with implication" and "without implication" usage test cases
separately.
The set of generated test cases is unchanged. The order, and the description
of "with implication" test cases, changes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When doing builds with PSA enabled or with debug traces enabled, convey this
in $MBEDTLS_TEST_CONFIGURATION and in the terminal logs.
This fixes a bug that the outcome file did not distinguish entries from
test cases run in a reference configuration with or without PSA.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
User-visible changes:
* With no argument, configurations are now tested in a deterministic order.
* When given arguments, configurations are now tested in the order given.
* When given arguments, if the same configuration is passed multiple times,
it will now be tested multiple times.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To be able to test utility programs for an absence of time.h, we need a
baremetal config that is not crypto only. Add one.
Signed-off-by: Daniel Axtens <dja@axtens.net>
baremetal compiles should not include time.h, as MBEDTLS_HAVE_TIME is
undefined. To test this, provide an overriding include directory that
has a time.h which throws a meaningful error if included.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Running mypy was optional for a transition period when it wasn't installed
on the CI. Now that it is, make it mandatory, to avoid silently skipping an
expected check if mypy doesn't work for some reason.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Many test cases in ssl-opt.sh need error messages (MBEDTLS_ERROR_C) or SSL
traces (MBEDTLS_DEBUG_C). Some sample configurations don't include these
options. When running ssl-opt.sh on those configurations, enable the
required options. They must be listed in the config*.h file, commented out.
Run ssl-opt in the following configurations with debug options:
ccm-psk-tls1_2, ccm-psk-dtls1_2, suite-b.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
1. Copy config-ccm-psk-tls1_2.h
2. Add DTLS support
3. Add some TLS and DTLS features that are useful in low-bandwidth,
low-reliability networks
4. Reduce the SSL buffer to a very small size
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Expand abi_check.py to look for backward incompatibilities not only in
the interface exposed to application code (and to some extent driver
code), but also to the interface exposed via the storage format, which
is relevant when upgrading Mbed TLS on a device with a PSA keystore.
Strictly speaking, the storage format checks look for regressions in
the automatically generated storage format test data. Incompatible
changes that are not covered by the generated tests will also not be
covered by the interface checker.
A known defect in this commit is that the --brief output is not brief
for storage format checks.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Provide an additional pair of #defines, MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
and MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY. At most one of them may be
specified. If used, it is necessary to compile with -march=armv8-a+crypto.
The MBEDTLS_SHA256_PROCESS_ALT and MBEDTLS_SHA256_ALT mechanisms
continue to work, and are mutually exclusive with A64_CRYPTO.
There should be minimal code size impact if no A64_CRYPTO option is set.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
