Use a more straightforward condition to note that session resumption
is happening.
Co-authored-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
After opening a file containing sensitive data, call mbedtls_setbuf() to
disable buffering. This way, we don't expose sensitive data to a memory
disclosure vulnerability in a buffer outside our control.
This commit adds a call to mbedtls_setbuf() after each call to fopen(),
except:
* In ctr_drbg.c, in load_file(), because this is only used for DH parameters
and they are not confidential data.
* In psa_its_file.c, in psa_its_remove(), because the file is only opened
to check its existence, we don't read data from it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add a platform function mbedtls_setbuf(), defaulting to setbuf().
The intent is to allow disabling stdio buffering when reading or writing
files with sensitive data, because this exposes the sensitive data to a
subsequent memory disclosure vulnerability.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To test version negotiation with tls12 OpenSSL/GnuTLS server, If
`rsa_pss_rsae_*` were sent to server before `rsa_pkcs_*`, server
will return `rsa_pss_rsae_*` as key exchange sig alg. OpenSSL/GnuTLS
can work with this case. mbedTLS will fail due to `rsa_pss_rsae_*`
unsupported.
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Rename ssl_tls13_write_hello_retry_request_coordinate to
ssl_tls13_prepare_hello_retry_request as it is more
aligned with what the function does.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename server_hello_coordinate to preprocess_server_hello
as it is more aligned with what the function does.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Align the organization of the EncryptedExtensions
message parsing code with the organization of the
other message parsing codes.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use escape mechanism defined in RFC 1779 when parsing commas and other
special characters in X509 DN values. Resolves failures when generating
a certificate with a CSR containing a comma in subject value.
Fixes#769.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Fix an issue whereby a variable was used to check the size of incoming
TLS records against the configured maximum prior to it being set to the
right value.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
According to the TLS 1.3 standard the CCS records must be unencrypted.
When a record is not encrypted the counter, used in the dynamic IV
creation, is not incremented.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
Previously, the transforms were populated before extension
parsing, which resulted in the client rejecting a server
hello that contained a connection ID.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Fix a null pointer dereference when performing some operations on zero
represented with 0 limbs: mbedtls_mpi_mod_int() dividing by 2, or
mbedtls_mpi_write_string() in base 2.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This could lead to a potential buffer overread with small
MBEDTLS_SSL_IN_CONTENT_LEN.
Change the bound calculations so that it is apparent
what lengths and sizes are used.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Fixed a bug that the little-endian Microblaze does not work when MBEDTLS_HAVE_ASM is defined.
Signed-off-by: Kazuyuki Kimura <kim@wing.ocn.ne.jp>
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Fix an issue reported by Coverity whereby some constant time functions
called from the ssl decrypt code could potentially access uninitialised
memory.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Unify parsing of the signature algorithms extension in TLS 1.2 and TLS 1.3
CI ABI API check job failure is expected as the PR do some changes in ssl_misc.h.
@RcColes if you eventually want to request some changes, they can be done in a follow-up PR.
The bit length of m is leaked through through timing in ecp_mul_mxz().
Initially found by Manuel Pégourié-Gonnard on ecp_mul_edxyz(), which has
been inspired from ecp_mul_mxz(), during initial review of the EdDSA PR.
See: https://github.com/Mbed-TLS/mbedtls/pull/3245#discussion_r490827996
Fix that by using grp->nbits + 1 instead, which anyway is very close to
the length of m, which means there is no significant performance impact.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
psa_raw_key_agreement() returned PSA_ERROR_INVALID_ARGUMENT instead of
PSA_ERROR_BUFFER_TOO_SMALL when the output buffer was too small for ECDH,
the only algorithm that is currently implemented. Make it return the correct
error code.
The reason for the wrong error code is that ecdh.c returns
MBEDTLS_ERR_ECP_BAD_INPUT_DATA, presumably for similarith with dhm.c. It
might make sense to change ecdh.c to use MBEDTLS_ERR_ECP_BUFFER_TOO_SMALL,
but dhm.c doesn't have an existing BUFFER_TOO_SMALL error. To minimize the
impact of the fix, handle this in the PSA layer.
Fixes#5735.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These issues were flagged by Coverity as instances where a local
variable may be used prior to being initialized. Please note that
none of these changes fixes any particular bug, this is just an attempt
to add more robustness.
Signed-off-by: Leonid Rozenboim <leonid.rozenboim@oracle.com>
Remaining hits seem to be hex data, certificates,
and other miscellaneous exceptions.
List generated by running codespell -w -L
keypair,Keypair,KeyPair,keyPair,ciph,nd
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Rename local variables and to simplify things use static_assert to
determine if the default signiture algorithms are not fit into the
SSL handshake structure.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
Rename `mbedtls_ssl_sig_hash_set_find` function to a suitable name
and rewrite to operate TLS signature algorithm identifiers.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
Introduce a new macro MBEDTLS_TLS_SIG_NONE for invalid signiture algorithm.
It is intended to use in common code of TLS 1.2 and 1.3.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
Removes a case in mbedtls_asn1_named_data() where memcpy() could be
called with a null pointer and zero length. A test case is added for
this code path, to catch the undefined behavior when running tests with
UBSan.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
When ALG_TLS12_PSK_TO_MS() is used, first derivation is correct
but the following derivations output data is incorrect.
This is because input key is erased in psa_tls12_prf_psk_to_ms_set_key()
since commit 03faf5d2c1.
Fixes: 03faf5d2c1 ("psa_tls12_prf_psk_to_ms_set_key: clear buffers after usage")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Then mbedtls_pk_error_from_psa_rsa() also needs to be guarded with
PSA_WANT_KEY_TYPE_RSA_KEY_PAIR to be used by pk_opaque_rsa_decrypt()
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reduce the amount of ifdef's by making the USE_PSA_CRYPTO and
non-USE_PSA_CRYPTO definitions independent.
No behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Reduce the imbrications between preprocessor directives and C instructions.
Handle encrypt-then-mac separately.
No behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace custom LIB_INSTALL_DIR with standard CMAKE_INSTALL_LIBDIR variable.
For backward compatibility, set CMAKE_INSTALL_LIBDIR if LIB_INSTALL_DIR is set.
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Several call sites flagged by Coverity that may potentially cause
a pointer argument to be NULL.
In two cases the issue is using a function call as a parameter to
a second function, where the first function may return NULL, while
the second function does not check for the NULL argument value.
Remaining case is when static configuration is mixed with run-time
decision, that could result in a data buffer argument being NULL.
Signed-off-by: Leonid Rozenboim <leonid.rozenboim@oracle.com>
Remove useless hrr code
Share validate_cipher_suit between client and server
Fix test failure when tls13 only in server side
Change-Id: I5d6a7932bd8448ebf542bc86cdcab8862bc28e9b
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Refine named_group parsing
Refine cipher_suites parsing
Remove hrr related part
Share code between client and server side
Some code style changes
Change-Id: Ia9ffd5ef9c0b64325f633241e0ea1669049fe33a
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Remove cookie support from server side
Change code to align with coding styles
Re-order functions of client_hello
Change-Id: If31509ece402f8276e6cac37f261e0b166d05e18
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Compilers are likely to generate shorter assembly for loops of the
form `while( cnt-- ) { ... }` rather than
`for( ; count >= X; count -= X ) { ... }`. (E.g. the latter needs
a subtract+compare+branch after each loop, while the former only
needs decrement+branch).
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Overly restrictive protocol version negotiation checks might be
"version intolerant". TLS 1.3 and DTLS 1.3 move the version to
the "supported_versions" ClientHello extension.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Use mbedtls_ssl_protocol_version in public structs, even when doing
so results in a binary-incompatible change to the public structure
(PR feedback from @ronald-cron-arm)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
remove use of MBEDTLS_SSL_MINOR_VERSION_*
remove use of MBEDTLS_SSL_MAJOR_VERSION_*
(only remaining use is in tests/suites/test_suite_ssl.data)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible, as the struct is now smaller.
Reduce size of mbedtls_ssl_ciphersuite_t
members are defined using integral types instead of enums in
order to pack structure and reduce memory usage by internal
ciphersuite_definitions[]
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible on little-endian platforms,
but is compatible on big-endian platforms. For systems supporting
only TLSv1.2, the underlying values are the same (=> 3).
New setter functions are more type-safe,
taking argument as enum mbedtls_ssl_protocol_version:
mbedtls_ssl_conf_max_tls_version()
mbedtls_ssl_conf_min_tls_version()
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version instead of minor version number in tls_version.
Note: struct member size changed from unsigned char to uint16_t
Due to standard structure padding, the structure size does not change
unless alignment is 1-byte (instead of 2-byte or more)
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is compatible on little-endian platforms,
but not compatible on big-endian platforms. The enum values for
the lower byte of MBEDTLS_SSL_VERSION_TLS1_2 and of
MBEDTLS_SSL_VERSION_TLS1_3 matches MBEDTLS_SSL_MINOR_VERSION_3 and
MBEDTLS_SSL_MINOR_VERSION_4, respectively.
Note: care has been taken to preserve serialized session format,
which uses only the lower byte of the TLS version.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Removing the trimming has significant memory impact. While it is clearly what
we want to do eventually for constant-time'ness, it should be fixed alongside
a strategy to contain the ramifications on memory usage.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The variable is a local variable for the i386 bignum assembly only;
introduce it as part of the start/finish macros.
It can be noted that the variable is initialize to 0 within MULADDC_INIT,
so there are no data dependencies across blocks of MULADDC_INIT/CORE/STOP.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The timing module might include time.h on its own when on
a suitable platform, even if MBEDTLS_HAVE_TIME is disabled.
Co-authored-by: Tom Cosgrove <tom.cosgrove@arm.com>
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Having such implementation might cause issues for those that
expect to have a working implementation.
Having a compile-time error is better in such case.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
A previous commit has changed the signature of mpi_mul_hlp, making the length
of the output explicit. This commit adjusts mpi_montmul() accordingly.
It also fixes a comment on the required size of the temporary value
passed to mpi_montmul() (but does not change the call-sites).
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
A previous commit has changed the signature of mpi_mul_hlp(), making
the length of the output explicit.
This commit adjusts mbedtls_mpi_mul_int() to this change.
Along the way, we make the code simpler and more secure by not calculating
the minimal limb-size of A. A previous comment indicated that this was
functionally necessary because of the implementation of mpi_mul_hlp() --
if it ever was, it isn't anymore.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The previous commit has changed the signature of mpi_mul_hlp(),
making the length of the output explicit.
This commit adjusts the call-site in mbedtls_mpi_mul_mpi() to
this new signature.
A notable change to the multiplication strategy had to be made:
mbedtls_mpi_mul_mpi() performs a simple row-wise schoolbook
multiplication, which however was so far computed iterating
rows from top to bottom. This leads to the undesirable consequence
that as lower rows are calculated and added to the temporary
result, carry chains can grow. It is simpler and faster to
iterate from bottom to top instead, as it is guaranteed that
there will be no carry when adding the next row to the previous
temporary result: The length of the output in each iteration
can be fixed to len(B)+1.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The helper `mpi_mul_hlp()` performs a multiply-accumulate
operation `d += s * b`, where `d,b` are MPIs and `b` is a scalar.
Previously, only the length of `s` was specified, while `d` was
assumed to be 0-terminated of unspecified length.
This was leveraged at the end of the core multiplication steps
computingg the first `limb(s)` limbs of `d + s*b`: Namely, the
routine would keep on adding the current carry to `d` until none
was left. This can, in theory, run for an arbitrarily long time
if `d` has a tail of `0xFF`s, and hence the assumption of
`0`-termination.
This solution is both fragile and insecure -- the latter because
the carry-loop depends on the result of the multiplication.
This commit changes the signature of `mpi_mul_hlp()` to receive
the length of the output buffer, which must be greater or equal
to the length of the input buffer.
It is _not_ assumed that the output buffer is strictly larger
than the input buffer -- instead, the routine will simply return
any carry that's left. This will be useful in some applications
of this function. It is the responsibility of the caller to either
size the output appropriately so that no carry will be left, or
to handle the carry.
NOTE: The commit leaves the library in a state where it cannot
be compiled since the call-sites of mpi_mul_hlp() have
not yet been adjusted. This will be done in the subsequent
commits.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
It doesn't make sense for psa_mac_verify() to return
PSA_ERROR_BUFFER_TOO_SMALL since it doesn't have an output buffer. But this
was happening when requesting the verification of an unsupported algorithm
whose output size is larger than the maximum supported MAC size, e.g.
HMAC-SHA-512 when building with only SHA-256 support. Arrange to return
PSA_ERROR_NOT_SUPPORTED instead.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In some cases, a cipher operation for an unsupported algorithm could succeed
in psa_cipher_{encrypt,decrypt}_setup() and fail only when input is actually
fed. This is not a major bug, but it has several minor downsides: fail-late
is harder to diagnose for users than fail-early; some code size can be
gained; tests that expect failure for not-supported parameters would have to
be accommodated to also accept success.
This commit at least partially addresses the issue. The only completeness
goal in this commit is to pass our full CI, which discovered that disabling
only PSA_WANT_ALG_STREAM_CIPHER or PSA_WANT_ALG_ECB_NO_PADDING (but keeping
the relevant key type) allowed cipher setup to succeed, which caused
failures in test_suite_psa_crypto_op_fail.generated in
component_test_psa_crypto_config_accel_xxx.
Changes in this commit:
* mbedtls_cipher_info_from_psa() now returns NULL for unsupported cipher
algorithms. (No change related to key types.)
* Some code that is only relevant for ECB is no longer built if
PSA_WANT_ALG_ECB_NO_PADDING is disabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Otherwise the systematically generated algorithm-not-supported tests
complain when they try to start an operation and succeed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Otherwise the systematically generated algorithm-not-supported tests
complain when they try to start an operation and succeed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This check can be removed as if the buffer is too small for the key, then export will fail.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
As we may offer ciphersuites not compatible with
TLS 1.3 in the ClientHello check that the selected
one is compatible with TLS 1.3.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use the actual minimum and maximum of the minor
version to be negotiated to filter ciphersuites
to propose rather than the ones from the
configuration.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add check in ServerHello supported_versions parsing
that the length of the extension data is exactly
two.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This implies that when both TLS 1.2 and TLS 1.3
are included in the build all the TLS 1.2 tests
using the default configuration now go through
a version negotiation on the client side.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In TLS 1.3 key sharing is not restricted to key
exchange with certificate authentication. It
happens in the PSK and ephemeral key exchange
mode as well where there is no certificate
authentication.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add some MBEDTLS_SSL_PROTO_TLS1_3 guards that will
be necessary when the ClientHello writing code is
made available when MBEDTLS_SSL_PROTO_TLS1_2 is
enabled.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This can only be TLS 1.2 now in this structure and when
adding support for TLS 1.2 or 1.3 version negotiation
the highest configured version can be TLS 1.3.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The TLS server code only support TLS 1.2 thus simplify
the check of the version proposed by the client.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
ssl_tls12_client.c contains only TLS 1.2 specific
code thus remove some checks on the minor version
version being MBEDTLS_SSL_MINOR_VERSION_3. No aim
for completeness, ssl_parse_server_hello() is not
reworked here for example.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In ssl_tls.c, move mbedtls_ssl_set_calc_verify_md() under the
"if defined(MBEDTLS_SSL_PROTO_TLS1_2)" pre-processor directive
as it is specific to TLS 1.2.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
ssl_set_handshake_prfs() is TLS 1.2 specific and only called
from TLS 1.2 only code thus no need to pass the TLS minor
version of the currebt session.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In TLS 1.3, a PSA ECDH private key may be created
even if MBEDTLS_SSL_USA_PSA_CRYPTO is disabled. We
must destroy this key if still referenced by an
handshake context when we free such context.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In case of TLS 1.3 and hybrid TLS 1.2/1.3, propose
PKCS1 v1.5 signatures with SHA_384/512 not only
SHA_256. There is no point in not proposing them
if they are available.
In TLS 1.3 those could be useful for certificate
signature verification.
In hybrid TLS 1.2/1.3 this allows to propose for
TLS 1.2 the same set of signature algorithms.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This has although the benefit of getting rid of a
potential integer overflow (though very unlikely
and probably harmless).
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ssl_cli.c and ssl_srv.c to reflect the fact
that they are TLS 1.2 specific now. Align there new
names with the TLS 1.3 ones.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
To be compatible with the other functions `mbedtls_psa_hkdf_extract` and
`mbedtls_psa_hkdf_expand` use hash algorithm for parameter.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
Encrypt-Then-Mac (ETM) is supported in Mbed TLS TLS
1.2 server only for the CBC cipher mode thus make it
clear in the SSL context.
The previous code was ok as long as the check of
the ETM status was done only in the case of the CBC
cipher mode but fragile as #5573 revealed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove state MBEDTLS_SSL_CLIENT_CCS_AFTER_CLIENT_HELLO cause no early data
Change code styles and comments
Fix cookie write issues
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Provide an additional pair of #defines, MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
and MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY. At most one of them may be
specified. If used, it is necessary to compile with -march=armv8.2-a+sha3.
The MBEDTLS_SHA512_PROCESS_ALT and MBEDTLS_SHA512_ALT mechanisms
continue to work, and are mutually exclusive with SHA512_USE_A64_CRYPTO.
There should be minimal code size impact if no A64_CRYPTO option is set.
The SHA-512 implementation was originally written by Simon Tatham for PuTTY,
under the MIT licence; dual-licensed as Apache 2 with his kind permission.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
The `psa_ssl_status_to_mbedtls` function is not only used for
cipher operations so transalte to TLS error codes.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
- use mbedtls_ecp_point_write_binary() instead mbedtls_mpi_write_binary().
- add check for ECDH curve type in server's certificate
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Send data (call to mbedtls_ssl_flush_output()) only from
the loop over the handshake steps. That way, we do not
have to take care of the partial writings (MBEDTLS_ERR_SSL_WANT_WRITE
error code) on the network in handshake step handlers.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Even if certificate authentication is disabled at build
time, go through the MBEDTLS_SSL_CLIENT_CERTIFICATE state.
It simplifies overall the code for a small code size
cost when certificate authentication is disabled at build
time. Furthermore that way we have only one point in the
code where we switch to the handshake keys for record
encryption.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
MBEDTLS_HAVE_TIME is documented as: "System has time.h and time()."
If that is not defined, do not attempt to include time.h.
A particular problem is platform-time.h, which should only be included if
MBEDTLS_HAVE_TIME is defined, which makes everything messier. Maybe it
should be refactored to have the check inside the header.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Extend mbedtls_ssl_set_hs_own_cert() to reset handshake cert list
if cert provided is null. Previously, mbedtls_ssl_set_hs_own_cert()
only provided a way to append to the handshake certificate list,
without providing a way to replace the handshake certificate list.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
The Mbed TLS coding standard specifies that "check" functions must return 0
for success (i.e. feature present), while "has" functions should return 1 for
true. Since we were using "check" to do the actual check, and "has" to get the
cached value, having inverted values here would be confusing. Therefore,
rename "check" to "determine", as that's what those functions are doing.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
Sign rsa is not thread safe. Remove it from current code.
And a thread-safe version should be re-introduce in future.
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Use conditional compilation flags for building ECC key derivation code consistent with flags used for mbedtls_ecc_group_of_psa().
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
Perform the following optimizations:
- fix used flags for conditional compilation
- remove redundant N variable
- move loop used to generate valid k value to helper function
- fix initial value of status
- fix comments
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
The following error was reported by CI for win32/release builds:
37>Done Building Project "C:\builds\workspace\mbed-tls-pr-head_PR-5139-head\worktrees\tmp_nn5muy8\visualc\VS2010\gen_entropy.vcxproj.metaproj" (Rebuild target(s)).
67>c:\builds\workspace\mbed-tls-pr-head_pr-5139-head\worktrees\tmp_nn5muy8\library\psa_crypto.c(4840): fatal error C1001: An internal error has occurred in the compiler. [C:\builds\workspace\mbed-tls-pr-head_PR-5139-head\worktrees\tmp_nn5muy8\visualc\VS2010\key_ladder_demo.vcxproj]
(compiler file 'f:\dd\vctools\compiler\utc\src\p2\main.c', line 228)
To work around this problem, try simplifying or changing the program near the locations listed above.
Please choose the Technical Support command on the Visual C++
Help menu, or open the Technical Support help file for more information
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
Add accessors to mbedtls_ssl_context: user data, version
ABI-API-checking fails which was expected as this PR adds a new field in mbedtls_ssl_context and mbedtls_ssl_config.
Provide an additional pair of #defines, MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
and MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY. At most one of them may be
specified. If used, it is necessary to compile with -march=armv8-a+crypto.
The MBEDTLS_SHA256_PROCESS_ALT and MBEDTLS_SHA256_ALT mechanisms
continue to work, and are mutually exclusive with A64_CRYPTO.
There should be minimal code size impact if no A64_CRYPTO option is set.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
Function mbedtls_x509write_crt_set_key_identifier
was implemented to provide functionality of both
mbedtls_x509write_crt_set_authority_key_identifier
and
mbedtls_x509write_crt_set_subject_key_identifier.
Signed-off-by: pespacek <peter.spacek@silabs.com>
Change from MBEDTLS_ERR_ERROR_GENERIC_ERROR
to MBEDTLS_ERR_PLATFORM_HW_ACCEL_FAILED
where PSA crypto is used.
Signed-off-by: pespacek <peter.spacek@silabs.com>
Generate ECDH private key using psa_generate_key()
Export the public part of the ECDH private key using psa_export_public_key()
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
ctr_drbg is a local variable and thus needs initialisation every time
LLVMFuzzerTestOneInput() is called, the rest of the variables inside the
if(initialised) block are all static.
Add extra validation to attempt to catch this issue in future.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
These fields need to be enabled for 1.3 even if MBEDTLS_USE_PSA_CRYPTO isn't (1.3 should always use PSA).
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
Duplicate a test case but with a different expected error
due to error translation to and from PSA.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The non-PSA path has a debug message here, so let's have a similar one
in the PSA case - just add the curve ID to be a bit more informative.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This can be used to validate the server's choice of group in the PSA
case (this will be done in the next commit).
Note that new function doesn't depend on ECP_C, as it only requires
mbedtls_ssl_get_groups(), which is always available. As a general rule,
functions for defining and enforcing policy in the TLS module should not
depend on low-level modules but work with TLS-level identifiers are much
as possible, and this new function follows that principle.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
There's no way currently (see below regarding the future) that ECC-based
key exchanges are enabled without ECP_C being defined. So, the #if was
fully redundant with the checks surrounding the function, as it always
evaluated to true.
The situation arose as, in the old days (before Mbed TLS 2.0),
mbedtls_ssl_conf_curves() (or ssl_set_curves() as it was called back
then) was optional, controlled by its own compile-time option
POLARSSL_SSL_SET_CURVES. So, in turn mbedtls_ssl_check_curve() depended
on POLARSSL_SSL_SET_CURVES too, and all calls to it were guarded by
that.
When it was made non-optional, a blind
s/POLARSSL_SSL_SET_CURVES/MBEDTLS_ECP_C/ was done, which resulted in
stupid situations like this with redundant checks for ECP_C.
Note regarding the future: at some point it will be possible to compile
with ECC-based key exchanges but without ECP_C. This doesn't change
anything to the reasoning above: mbedtls_ssl_check_curve() will be
available in all builds where ECC is used; it will just need a new
definition (with new guards), but that doesn't change anything for its
callers.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Initially this function was doing something because the output format of
psa_export_public() didn't match the ECPoint format that TLS wants.
Then it became a no-op then the output format of psa_export_public()
changed, but it made sense to still keep the function in case the format
changed again. Now that the PSA Crypto API has reached 1.0 status, this
is unlikely to happen, so the no-op function is no longer useful.
Removing it de-clutters the code a bit; while at it we can remove a
temporary stack buffer (that was up to 133 bytes).
It's OK to remove this function even if it was declared in a public
header, as there's a warning at the top of the file saying it's not part
of the public API.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As PSA_ALG_IS_AEAD( transform->psa_alg ) can't be used as switch labels (switch labels must be constant expressions, they have to be evaluated at compile time) refactor switch to "if else" statement.
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
Align the alert type in parse_server_hello
Remove MBEDTLS_SSL_COOKIE_C guard
Enable cookie for both DTLS and TLS1.3
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Add comments for parse hrr key share and cookie
Change variable names based on RFC8466
Refine fatal allerts in parse server hello and hrr
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Move reset transcript for hrr to generic
Reset SHA256 or SHA384 other than both
Rename message layer reset
Add check log for hrr parse successfully
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Avoid coping random bytes in hrr
Send illegal parameter alert when cipher suite mismatch
Send illegal parameter alert when supported_version not exist
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
The implementation was silently overwriting the IV length to 12
even though the caller passed a different value.
Change the behavior to signal that a different length is not supported.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The implementation was silently overwriting the IV length to 12
even though the caller passed a different value.
Change the behavior to signal that a different length is not supported.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Previously, ecp_add_mixed(), commputing say P+Q, would allow for the
Q parameter to have an unset Z coordinate as a shortcut for Z == 1.
This was leveraged during computation and usage of the T-table
(storing low multiples of the to-be-multiplied point on the curve).
It is a potentially error-prone corner case, though, since an MPIs
with unset data pointer coordinate and limb size 0 is also a valid
representation of the number 0.
As a first step towards removing ECP points with unset Z coordinate,
the constant time T-array getter ecp_select_comb() has previously
been modified to return 'full' mbedtls_ecp_point structures,
including a 1-initialized Z-coordinate.
Similarly, this commit ...
- Modifies ecp_normalize_jac_many() to set the Z coordinates
of the points it operates on to 1 instead of freeing them.
- Frees the Z-coordinates of the T[]-array explicitly
once the computation and normalization of the T-table has finished.
As a minimal functional difference between old and new code,
the new code also frees the Z-coordinate of T[0]=P, which the
old code did not.
- Modifies ecp_add_mixed() to no longer allow unset Z coordinates.
Except for the post-precomputation storage form of the T[] array,
the code does therefore no longer use EC points with unset Z coordinate.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
psa_aead_encrypt_setup() and psa_aead_decrypt_setup() were returning
PSA_ERROR_INVALID_ARGUMENT, while the same failed checks were producing
PSA_ERROR_NOT_SUPPORTED if they happened in psa_aead_encrypt() or
psa_aead_decrypt().
The PSA Crypto API 1.1 spec will specify PSA_ERROR_INVALID_ARGUMENT
in the case that the supplied algorithm is not an AEAD one.
Also move these shared checks to a helper function, to reduce code
duplication and ensure that the functions remain in sync.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
ecp_select_comb() did previously not set the Z coordinate of the target point.
Instead, callers would either set it explicitly or leave it uninitialized,
relying on the (only partly upheld) convention that sometimes an uninitialized
Z value represents 1.
This commit modifies ecp_select_comb() to always set the Z coordinate to 1.
This comes at the cost of memory for a single coordinate, which seems worth
it for the increased robustness.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
At the end of the benchmark program, heap stats are printed, and these
stats will be wrong if we reset counters in the middle.
Also remove the function to reset counters, in order to encourage other
programs to behave correctly as well.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This improves readibility and prepares for further changes
like the introduction of a single double-width temporary for
ECP arithmetic.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Fix library references, tests and programs.
Testing is performed in the already present all.sh test.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
`ecp_add_mixed()` and `ecp_double_jac()` are the core subroutines
for elliptic curve arithmetic, and as such crucial for the performance
of ECP primitives like ECDHE and ECDSA.
This commit provides a very slight simplification and performance and
memory usage improvement to `ecp_add_mixed()` by removing the use of
three temporary MPIs used for coordinate calculations.
Where those variables were used, the code now writes directly to the
coordinate MPIs of the target elliptic curve point.
This is a valid change even if there is aliasing between input and
output, since at the time any of the coordinate MPIs in question is
written, the corresponding coordinates of both inputs are no longer
read.
(The analogous change in `ecp_double_jac()` can not be made since
this property does not hold for `ecp_double_jac()`.)
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit removes code from the Montgomery multiplication routine
`mpi_montmul()` which seems to serve no purpose.
Details: `mpi_montmul()` uses a temporary storage `T` for intermediate
results which is assumed to be of twice the size as the inputs to be
multiplied, and which is used as follows: After the i-th (i=0,1,...)
iteration, the n-limb word starting at `T->p + i + 1` contains the
Montgomery multiplication of B with the limbs 0,..,i of A, and the
variable `d` points to `T->p + i + 1`. In particular, after `n` iterations,
`T->p + n` holds the full multiplication
(subject to conditional subtraction).
As a consequence of this way of using the temporary `T`, the contents
of `{T->p, ..., T->p + i}` are irrelevant after the i-th iteration. Nonetheless,
the code copies `A[i]` to `T->p[i]` at the end of the i-th iterations, which is
redundant and can be removed.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
* Updated the default argument to create less noise with argument
passing.
* Reworded ChangeLog to match MbedTLS documentation/ announcement
requirements
Signed-off-by: Archana <archana.madhavan@silabs.com>
Pylint errors are fixed.
The Python script is improved to take default arguments when not
passed (eg invoked from root of the tree)
check-generated-files.sh and CMakeLists.sh updated.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Moved python script generate_driver_wrappers.py under scripts and
corresponding template file under script/data_files.
Signed-off-by: Archana <archana.madhavan@silabs.com>
The file psa_crypto_driver_wrappers.c is deleted to be autogenerated.
Updated psa_crypto_driver_wrappers.h, this file only contains the
prototypes for the driver wrappers, we don't expect this to be auto
generated.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Having an automatically generated header file makes it harder to have
working build scripts. The content of ssl_debug_helpers_generated.h isn't
likely to change often, so we can update it manually.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Running `generate_ssl_debug_helpers.py` generates both
`ssl_debug_helpers_generated.c` and `ssl_debug_helpers_generated.h`.
List the `.h` file as well as the `.c` file in `check-generated-files.sh` so
that `check-generated-files.sh -u` will complain if it isn't up to date.
List it in `Makefile` and `CMakeLists.txt` so that parallel builds know when
to wait until the `.h` file is present. In `Makefile`, declare the `.c` file
as depending on the `.h` file for order. This way, a dependency for either
will wait until the `.h` file is present, and since the `.h` file is
generated after the `.c` file, this guarantees that the `.c` file is
present.
This fixes random failures of `make -j` from a fresh checkout.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Zeroize temporary buffers used to sanity-check the signature.
If there is an error, overwrite the tentative signature in the output
buffer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Declare mbedtls_md functions as MBEDTLS_CHECK_RETURN_TYPICAL, meaning that
their return values should be checked.
Do check the return values in our code. We were already doing that
everywhere for hash calculations, but not for HMAC calculations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Zeroize local MAC variables used for CBC+HMAC cipher suites. In encryption,
this is just good hygiene but probably not needed for security since the
data protected by the MAC that could leak is about to be transmitted anyway.
In DTLS decryption, this could be a security issue since an adversary could
learn the MAC of data that they were trying to inject. At least with
encrypt-then-MAC, the adversary could then easily inject a datagram with
a corrected packet. TLS would still be safe since the receiver would close
the connection after the bad MAC.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_pk_parse_key() makes a temporary copy of the key when it calls
pk_parse_key_pkcs8_encrypted_der(), because that function requires a
writable buffer. pk_parse_key_pkcs8_encrypted_der() always rejects an
empty password, so skip calling it in that case, which allows us to
skip the allocation as well.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
As we have now a minimal viable implementation of TLS 1.3,
let's remove EXPERIMENTAL from the config option enabling
it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
"mbedtls_ssl_handshake_params: reorder fields to save code size" moved this
filed earlier along with byte-sized fields that should be in the 128-element
access window on Arm Thumb. This took away precious room in the 128-byte
window. Move it back further out.
Results (same architecture, config-suite-b.h + MBEDTLS_ECDH_LEGACY_CONTEXT +
MBEDTLS_ECP_RESTARTABLE):
library/ssl_cli.o: 2860 -> 2816 (diff: 44)
library/ssl_msg.o: 3080 -> 3076 (diff: 4)
library/ssl_srv.o: 3340 -> 3300 (diff: 40)
library/ssl_tls.o: 6546 -> 6478 (diff: 68)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The current testing of the PSA configuration is
based on test code located in the library itself.
Remove this code as we are moving to using a
test library instead.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename test driver entry points to
libtestdriver1_<name of the Mbed TLS entry point>.
This aligns with the renaming of all Mbed TLS APIs
for the test driver library (that will be put in place
in the following commits) to avoid name conflicts
when linking it with the Mbed TLS library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of the driver test entry points to be
provided by a test driver library, move their prototypes
to tests directory.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In psa_asymmetric_encrypt/decrypt(), always return
PSA_ERROR_INVALID_ARGUMENT if the key is a PSA key
and the algorithm is not a PSA algorithm we know
about, whether RSA is supported or not.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define test driver entry points that provide an alternative
to Mbed TLS driver entry points only when the PSA configuration
is used. Their purpose is only to test the PSA configuration
thus there is no good reason to use them out of this scope.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The test entry points defined in psa_crypto_hash.c
and psa_crypto_mac.c are supposed to be exact
clones of the Mbed TLS driver entry points. Thus
the operation type should be the Mbed TLS operation
type not a test one. There was no compilation error
as the hash and cipher operation test types are
currently equal to the Mbed TLS ones.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Align RSA/ECP sign/verify hash dispatch with the
corresponding code of the library. The library
code was modified recently but not the test code
one and these modifications ease the following work.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reorder fields mbedtls_ssl_handshake_params in order to save code on Arm
Thumb builds. The general idea is to put often-used fields in the direct
access window of 128 elements from the beginning of the structure.
The reordering is a human selection based on a report of field offset and
use counts, and informed by measuring the code size with various
arrangements. Some notes:
* This is the same reordering as the corresponding commit in #5189 for 2.2x.
* I moved most byte-sized fields at the beginning where they're sure to be
in the direct access window.
* I moved buffering earlier because it can be around the threshold depending
on the configuration, and it's accessed in a lot of places.
* I moved several fields, including update_checksum and friends, early so
that they're guaranteed to be in the early access window.
Results (arm-none-eabi-gcc 7.3.1, build_arm_none_eabi_gcc_m0plus build):
library/ssl_cli.o: 19763 -> 19687 (diff: 76)
library/ssl_msg.o: 24874 -> 24834 (diff: 40)
library/ssl_srv.o: 20754 -> 20562 (diff: 192)
library/ssl_tls.o: 21003 -> 20907 (diff: 96)
library/ssl_tls13_client.o: 7284 -> 7272 (diff: 12)
library/ssl_tls13_generic.o: 4749 -> 4721 (diff: 28)
library/ssl_tls13_keys.o: 5133 -> 5077 (diff: 56)
Results (same architecture, config-suite-b.h + MBEDTLS_ECDH_LEGACY_CONTEXT +
MBEDTLS_ECP_RESTARTABLE):
library/ssl_cli.o: 3000 -> 2936 (diff: 64)
library/ssl_msg.o: 3084 -> 3080 (diff: 4)
library/ssl_srv.o: 3428 -> 3400 (diff: 28)
library/ssl_tls.o: 6754 -> 6730 (diff: 24)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace bitfields mbedtls_ssl_handshake_params by bytes. This saves some
code size, and since the bitfields weren't group, this doesn't increase the
RAM usage.
Replace several ints that only store values in the range 0..255 by uint8_t.
This can increase or decrease the code size depending on the architecture
and on how the field is used. I chose changes that save code size on Arm
Thumb builds and will save more after field reordering.
Leave the bitfields in struct mbedtls_ssl_hs_buffer alone: replacing them by
uint8_t slightly increases the code size.
Results (arm-none-eabi-gcc 7.3.1, build_arm_none_eabi_gcc_m0plus build):
library/ssl_cli.o: 19759 -> 19763 (diff: -4)
library/ssl_srv.o: 20790 -> 20754 (diff: 36)
library/ssl_tls13_keys.o: 5153 -> 5133 (diff: 20)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't use the output buffer in psa_aead_generate_nonce()
to pass the generated nonce to the driver as a local
attacker could potentially control it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Don't use the output buffer in psa_cipher_encrypt()
to pass the generated IV to the driver as local
attacker could potentially control it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Align the execution of cipher one-shot APIs with
that of cipher multi-part APIs: always exit
through the exit-labelled section.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Don't use the output buffer in psa_cipher_generate_iv()
to pass the generated IV to the driver as local
attacker could potentially control it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move fields around to have fewer accesses outside the 128-element Thumb
direct access window.
Make the same change as in 2.27+, for the same small benefit.
Results (arm-none-eabi-gcc 7.3.1, build_arm_none_eabi_gcc_m0plus build):
library/psa_crypto.o: 16434 -> 16414 (diff: 20)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove support signature PKCS1 v1.5 in CertificateVerify.
Remove useless server states in test script
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Change client test code to support rsa pss signatures
Add test cases for rsa pss signature in ssl-opt.sh
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
psa_key_derivation_output_key: prioritize BAD_STATE over NOT_PERMITTED
If psa_key_derivation_output_key() is called on an operation which hasn't been
set up or which has been aborted, return PSA_ERROR_BAD_STATE. Only return
PSA_ERROR_NOT_PERMITTED if the operation state is ok for
psa_key_derivation_input_bytes() or psa_key_derivation_output_bytes() but not
ok to output a key.
Ideally psa_key_derivation_output_key() would return PSA_ERROR_NOT_PERMITTED
only when psa_key_derivation_output_bytes() is possible, but this is clumsier
to implement.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Previously passing a NULL or zero length password into either
mbedtls_pkcs12_pbe() or mbedtls_pkcs12_derive() could cause an infinate
loop, and it was also possible to pass a NULL password, with a non-zero
length, which would cause memory corruption.
I have fixed these errors, and improved the documentation to reflect the
changes and further explain what is expected of the inputs.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Remove client certificate verify in tests.
Change the layout of structure to fix abi_api check issues.
Add comments of Finished.
Align with the coding styles.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
This is a workaround for an issue with mkstemp() in older MinGW releases that
causes simultaneous creation of .a files in the same directory to fail.
Fixes#5146
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
Change debug messag for server finished.
Change name of generate_application_keys.
Remove the client vertificate tests from ssl-opt.sh.
Add test strings for server finished in ssl-opt.sh.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Move set_state function into client
Add back export_key callback function in generate
application keys
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Fix the variable not inialized issue, remove the client
certificate related code, remove early data related code.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
The current definition of PSA_ALG_IS_HASH_AND_SIGN includes
PSA_ALG_RSA_PKCS1V15_SIGN_RAW and PSA_ALG_ECDSA_ANY, which don't strictly
follow the hash-and-sign paradigm: the algorithm does not encode a hash
algorithm that is applied prior to the signature step. The definition in
fact encompasses what can be used with psa_sign_hash/psa_verify_hash, so
it's the correct definition for PSA_ALG_IS_SIGN_HASH. Therefore this commit
moves definition of PSA_ALG_IS_HASH_AND_SIGN to PSA_ALG_IS_SIGN_HASH, and
replace the definition of PSA_ALG_IS_HASH_AND_SIGN by a correct one (based
on PSA_ALG_IS_SIGN_HASH, excluding the algorithms where the pre-signature
step isn't to apply the hash encoded in the algorithm).
In the definition of PSA_ALG_SIGN_GET_HASH, keep the condition for a nonzero
output to be PSA_ALG_IS_HASH_AND_SIGN.
Everywhere else in the code base (definition of PSA_ALG_IS_SIGN_MESSAGE, and
every use of PSA_ALG_IS_HASH_AND_SIGN outside of crypto_values.h), we meant
PSA_ALG_IS_SIGN_HASH where we wrote PSA_ALG_IS_HASH_AND_SIGN, so do a
global replacement.
```
git grep -l IS_HASH_AND_SIGN ':!include/psa/crypto_values.h' | xargs perl -i -pe 's/ALG_IS_HASH_AND_SIGN/ALG_IS_SIGN_HASH/g'
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The makefile build specifies -L. -lmbedx509 -lmbedcrypto flags first,
and only then object files referencing symbols from those libraries.
In this order the linker will not add the linked libraries to the
DT_NEEDED section because they are not referenced yet (at least that
happens for me on ubuntu 20.04 with the default gnu compiler tools).
By first specifying the object files and then the linked libraries, we
do end up with libmbedx509 and libmbedcrypto in the DT_NEEDED sections.
This way running dlopen(...) on libmedtls.so just works.
Note that the CMake build does this by default.
Signed-off-by: Harmen Stoppels <harmenstoppels@gmail.com>
The refactoring is needed for the group api to work
properly. Code is modified to use mbedtls_get_supported_groups
instead of direct access so that both deprecated and new api
are useable.
Signed-off-by: Brett Warren <brett.warren@arm.com>
mbedtls_ssl_conf_groups allows supported groups for key
sharing to be configured via their IANA NamedGroup ID.
This is added in anticipation of PQC and Hybrid key
sharing algorithms being integrated into Mbed TLS.
mbedtls_ssl_conf_curves is deprecated in favor of
mbedtls_ssl_conf_groups. handshake_init has been
modified to translate and copy curves configured
via conf_curves into a heap allocatied array of
NamedGroup IDs. This allows the refactoring of code
interacting with conf_curve related variables (such
as curve_list) to use NamedGroup IDs while retaining
the deprecated API.
Signed-off-by: Brett Warren <brett.warren@arm.com>
To test c <= high, instead of testing the sign of (high + 1) - c, negate the
sign of high - c (as we're doing for c - low). This is a little easier to
read and shaves 2 instructions off the arm thumb build with
arm-none-eabi-gcc 7.3.1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
n was used for two different purposes. Give it a different name the second
time. This does not seem to change the generated code when compiling with
optimization for size or performance.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of doing constant-flow table lookup, which requires 64 memory loads
for each lookup into a 64-entry table, do a range-based calculation, which
requires more CPU instructions per range but there are only 5 ranges.
I expect a significant performance gain (although smaller than for decoding
since the encoding table is half the size), but I haven't measured. Code
size is slightly smaller.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Document what each local variable does when it isn't obvious from the name.
Don't reuse a variable for different purposes.
This commit has very little impact on the generated code (same code size on
a sample Thumb build), although it does fix a theoretical bug that 2^32
spaces inside a line would be ignored instead of treated as an error.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of doing constant-flow table lookup, which requires 128 memory loads
for each lookup into a 128-entry table, do a range-based calculation, which
requires more CPU instructions per range but there are only 5 ranges.
Experimentally, this is ~12x faster on my PC (based on
programs/x509/load_roots). The code is slightly smaller, too.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Base64 decoding uses equality comparison tests for characters that don't
leak information about the content of the data other than its length, such
as whitespace. Do this with '=' as well, since it only reveals information
about the length. This way the table lookup can focus on character validity
and decoding value.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When the option is On, CMake will have rules to generate the generated
files using scripts etc. When the option is Off, CMake will assume the
files are available from the source tree; in that mode, it won't require
any extra tools (Perl for example) compared to when we committed the
files to git.
The intention is that users will never need to adjust this option:
- in the development branch (and features branches etc.) the option is
always On (development mode);
- in released tarballs, which include the generated files, we'll switch
the option to Off (release mode) in the same commit that re-adds the
generated files.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This comment is about how the functions are implemented, not about their
public interface, so it doesn't belong in the header file.
It applies to everything in constant_time.c so moved there.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
TLS1.3:add read ptr and handshake kex modes
CI merge job: only "Session resume using tickets, DTLS: openssl client" failed in one component thus CI can be considered as passed.
TLS 1.3: ServerHello: add utils functions used by ServerHello
Regarding the merge job, there was only one of the failure we currently encounter on almost all PR (Session resume using tickets, DTLS: openssl client test case see #5012) thus we can consider that this PR passed CI.
PSA_ALG_RSA_PSS algorithm now accepts only the same salt length for
verification that it produces when signing, as documented.
Fixes#4946.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move GCM's update output buffer length verification
from PSA AEAD to the built-in implementation of the GCM.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The requirement of minimum 15 bytes for output buffer in
psa_aead_finish() and psa_aead_verify() does not apply
to the built-in implementation of the GCM.
Alternative implementations are expected to verify the
length of the provided output buffers and to return
the MBEDTLS_ERR_GCM_BUFFER_TOO_SMALL in case the
buffer length is too small.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
This function is one common function in generic file, get it from
the encrypted extension and submit one patch independently.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
When not using DEBUG_C, but using the DTLS CID feature -
a null pointer was accessed in ssl_tls.c.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
This option only gated an ability to set a callback,
but was deemed unnecessary as it was yet another define to
remember when writing tests, or test configurations. Fixes#4653.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Switch from using MBEDTLS_PSA_BUILTIN_ macros over to using PSA_WANT_
macros, as code was moved from the internal drivers to the PSA Core.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Nonce length checks are now being used in the oneshot AEAD code as well,
which passes variant algorithms, not the base version, so need to
convert to base if necessary.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
The equality checker functions always return 0 or 1 value,
thus the type of return value can be the same dispite of the
size of the parameters.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Tne unpadding part of `mbedtls_rsa_rsaes_pkcs1_v15_decrypt` function is
contant-time therefore it moved to a separate function to be prepared
for moving to the contant-time module.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Add a constant-time function with size_t parameter for choosing
between two integer values, like the ?: ternary operator.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
All function declaration provided by ssl_invasive.h is needed only for
testing purposes and all of them are provided by constant_time.h as well.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Elinimate macros defined by modules locally in the functions that are
moving to the new constant-time module.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
There were multiple functions called mbedtls_cf_size_bool_eq. They had exactly
the same behavior, so move the one in bignum.c and remove the other.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Declare all AES and DES functions that return int as needing to have
their result checked, and do check the result in our code.
A DES or AES block operation can fail in alternative implementations of
mbedtls_internal_aes_encrypt() (under MBEDTLS_AES_ENCRYPT_ALT),
mbedtls_internal_aes_decrypt() (under MBEDTLS_AES_DECRYPT_ALT),
mbedtls_des_crypt_ecb() (under MBEDTLS_DES_CRYPT_ECB_ALT),
mbedtls_des3_crypt_ecb() (under MBEDTLS_DES3_CRYPT_ECB_ALT).
A failure can happen if the accelerator peripheral is in a bad state.
Several block modes were not catching the error.
This commit does the following code changes, grouped together to avoid
having an intermediate commit where the build fails:
* Add MBEDTLS_CHECK_RETURN to all functions returning int in aes.h and des.h.
* Fix all places where this causes a GCC warning, indicating that our code
was not properly checking the result of an AES operation:
* In library code: on failure, goto exit and return ret.
* In pkey programs: goto exit.
* In the benchmark program: exit (not ideal since there's no error
message, but it's what the code currently does for failures).
* In test code: TEST_ASSERT.
* Changelog entry.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Also fiixed the following merge problems:
crypto_struct.h : Added MBEDTLS_PRIVATE to psa_aead_operation_s
members (merge conflict)
psa_crypto_aead.c : Added ciphertext_length to mbedtls_gcm_finish
call (change of API during development)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Add memory constraints to the aarch64 inline assembly in MULADDC_STOP.
This fixes an issue where Clang 12 and 13 were generating
non-functional code on aarch64 platforms. See #4962, #4943
for further details.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Now that support for earlier version have been removed, we no longer
need to care about them.
Since TLS 1.3 is being gradually introduced, we might still need a
version check in some places - but here the function is called
ssl_tls12_populate_tranform() and TLS 1.3 has its own function
mbedtls_ssl_tls13_populate_transform(), so when this function is called
we just know we're using TLS 1.2.
Reviewer hint: use the -b option of git diff / git show
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Use the encoding from an upcoming version of the specification.
Add as much (or as little) testing as is currently present for Camellia.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
MULADDC_CORE reads from (%%rsi) and writes to (%%rdi). This fragment is
repeated up to 16 times, and %%rsi and %%rdi are s and d on entry
respectively. Hence the complete asm statement reads 16 64-bit words
from memory starting at s, and writes 16 64-bit words starting at d.
Without any declaration of modified memory, Clang 12 and Clang 13 generated
non-working code for mbedtls_mpi_mod_exp. The constraints make the unit
tests pass with Clang 12.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This parameter was set but not used, which was pointless. Clang 14 detects
this and legitimately complains.
Remove the parameter. This is an internal function, only called once. The
caller already has a sufficient check on the output buffer size which
applies in more cases, so there is no real gain in robustness in adding the
same check inside the internal function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The target attributes for key copy could have key bits and
type zeroed. If so, they need to be overwritten/ inherited
from the source key.
This is now forcefully overwritten after validating the
optional attributes. As a result assigning attributes type
and bits after copy are no longer necessary.
Signed-off-by: Archana <archana.madhavan@silabs.com>
A minimal test driver extension is added to support
copy of opaque keys within the same location.
Test vector support is extended to cover opaque keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
The validation against key width and max key bits is extended to
all key types from the existing validation for only symmetric keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
-Add test driver support to import/export while wrapping keys
meant to be stored in the PSA core as opaque( emulating an
SE without storage ).
-Export validate_unstructured_key_bit_size as
psa_validate_unstructured_key_bit_size, thereby changing its scope.
-Improve the import/export test cases in test_suite_psa_crypto to also
cover opaque keys, thereby avoiding duplication.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Create a new sizing function for determining the size required for key
storage based on the input key data.
This is required for key imports where the key length might need to be
derived from the data.
Signed-off-by: Archana <archana.madhavan@silabs.com>
The report of RSA public exponent for opaque keys is not
supported. Do not attempt to compute the RSA public
exponent of an RSA opaque key associated to a driver
implementing the new driver interface when
MBEDTLS_PSA_CRYPTO_SE_C is disabled.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Slot number key attribute is specific of dynamically
registered drivers and should thus not be computed/
returned in case of keys associated to drivers
implementing the new unified driver interface.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Clarify the purpose of
psa_get_and_lock_transparent_key_slot_with_policy() and
define it even when MBEDTLS_PSA_CRYPTO_SE_C is disabled
for the purpose of static drivers.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
cleanup `ssl_tls13_write_client_hello_body`, fix comments issues.
And move ciphersuites to separate function
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
This reverts commit cc88b34f7942f57ea0fd27ee4b3e29f49c91f10e.
It causes many test fail. It should be re-considered.
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
mbedtls_cipher_setkey takes an int argument. Cast explicitly, otherwise MSVC
complains.
Where possible, just stick to size_t.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Warning reported with IAR compiler:
"mbedtls\library\pkparse.c",1167 Warning[Pe550]: variable "ret" was set but never used
Signed-off-by: Kenneth Soerensen <knnthsrnsn@gmail.com>
Conflicts:
library/ccm.c
Conflict resolved by re-applying the MBEDTLS_BYTE_0 macro.
Conflict resolved by ignoring the MBEDTLS_PUT_UINT16_BE macro
used in development branch on the 'b' buffer, because the 'b'
buffer is removed in current branch.
exchange groups of the byte reading macros with MBEDTLS_PUT_UINTxyz
and then shift the pointer afterwards. Easier to read as you can
see how big the data is that you are putting in, and in the case of
UINT32 AND UINT64 it saves some vertical space.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
exchange groups of the byte reading macros with MBEDTLS_PUT_UINTxyz
and then shift the pointer afterwards. Easier to read as you can
see how big the data is that you are putting in, and in the case of
UINT32 AND UINT64 it saves some vertical space.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Move common encrypt / decrypt code into common function, and roll in
previously refactored setup checks function, as this is now the only
place it is called.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
minor changes, such as improving the documentation for the byte reading
macros, and using MBEDTLS_PUT_UINT16_xy in place of byte reading
macro combinations
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Replace the contents of MBEDTLS_PUT_UINTx_yz contained inconsitent
but similar/duplicate code to the MBEDTLS_BYTE_x macros. Therefore
the contents of the macros now utilise the byte reading macros.
MBEDTLS_PUT_UINT64_LE's written order was also not consitent with
the other PUT macros, so that was modified.
Documentation comment said LSB instead of MSB and that has also been
resolved.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
byte shifting opertations throughout library/ were only replaced with
the byte reading macros when an 0xff mask was being used.
The byte reading macros are now more widley used, however they have not
been used in all cases of a byte shift operation, as it detracted from
the immediate readability or otherwise did not seem appropriate.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Copy over the GET/PUT_UINT64_LE/BE macros from aes.c and sha512.c
Add the MBEDTLS_ prefix to all 4 macros.
Modify the GET_UINT64 macros to no longer take a target variable
as a parameter, so when the macro function is called it must be
assigned to a variable in the same statement.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The CHAR macros casted to an unsigned char which in this project
is garunteed to be 8 bits - the same as uint8_t (which BYTE casts
to) therefore, instances of CHAR have been swapped with BYTE and
the number of macros have been cut down
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
aria.c has a shift by 3 bytes, but does not use the 0xff masking.
aparently this is not a problem and it is tidier to use the maco.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Imrpoved the descriptions of the macros and parameters and
changing the name of the MBEDTLS_PUT_UINT... macro parameters
to be more descriptive
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
These cast to an unsigned char rather than a uint8_t
like with MBEDTLS_BYTE_x
These save alot of space and will improve maintence by
replacing the appropriate code with MBEDTLS_CHAR_x
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The GET macros used to write to a macro parameter, but now
they can be used to assign a value to the desired variable
rather than pass it in as an argument and have it modified
in the macro function.
Due to this MBEDTLS_BYTES_TO_U32_LE is the same as
MBEDTLS_GET_UINT32_LE and was there for replaced in the
appropriate files and removed from common.h
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Added documenttion comments to common.h and removed the changelog
as it is not really necessary for refactoring.
Also modified a comment in aria.c to be clearer
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Although these only appear in one file: psa_crypto_storage.c
it is tidy to give it the same prefix as the UINT32 macros
and to store them in the fame file
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
As per tests/scripts/check-names.sh, macros in
library/ header files should be prefixed with
MBEDTLS_
The macro functions in common.h where also indented
to comply with the same test
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The use of the BYTE_x macro in nist_kw did not seem appropriate
in hind sight as it is working with a character array not an int
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
missed do-while around function-like macros (UINT32_BE and
UINT_LE macros) originally present in the indivdual files,
before being moved to common.h.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
32-bit integer manipulation macros (little edian):
GET_UINT32_LE and PUT_UINT32_LE appear in several
files in library/.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Also provided brief comment in common.h for
BYTES_TO_U32_LE. comment/documentation will
probably need to be edited further for all
recent additions to library/common.h
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
32-bit integer manipulation macros (big edian):
GET_UINT32_BE and PUT_UINT32_BE appear in several
files in library/.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The macro BYTES_TO_U32_LE appears in poly1305.c and
chacha20.c.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To improve readability by saving horizontal and vertical space.
Removed unecessary & 0xFF.
Byte reading macros implemented in library/common.h, All files
containing "& 0xff" were modified.
Comments/Documentation not yet added to the macro definitions.
Fixes#4274
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To keep consistent with ssl_{clien2t,server2}.
Change-Id: I08dbe47a3d9b778ba3acad283f608fef4e63c626
CustomizedGitHooks: yes
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
The psa_open_key API depends on MBEDTLS_PSA_CRYPTO_STORAGE_C.
This is unnecessary for builtin keys and so is fixed.
Updated an open_fail test vector keeping with the same.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Add the missing nonce length checks (this function is being used by
oneshot functions as well as multipart, and thus all cipher suites are
being used) and cover the case where a NULL buffer gets passed in.
Extended the set nonce test to cover this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Remove error clearing from ccm_starts() and ccm_set_lengths().
Add error check in ccm_update_ad(), ccm_update() and ccm_finish().
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Move logic to ccm_starts, ccm_set_lengths, ccm_update_ad,
ccm_update and ccm_finish
Use separate variable to track context state.
Encode first block only if both mbedtls_ccm_starts() and
mbedtls_ccm_set_lengths() were called.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Base on version config, `handshack_{clinet,server}_step`
will call different step function. TLS1.3 features will
be gradully added base on it.
And a new test cases is added to make sure it reports
`feature is not available`.
Change-Id: I4f0e36cb610f5aa59f97910fb8204bfbf2825949
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Check configuration parameter in structure setup
function to make sure the config data is available
and valid.
Current implementation checks the version config.
Available version configs are
- tls1_3 only
- tls1_2 only
issues: #4844
Change-Id: Ia762bd3d817440ae130b45f19b80a2868afae924
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
The helper `mbedtls_ssl_write_handshake_msg` writes a handshake message
and updates the handshake transcript.
With TLS 1.3, we need finer control over the checksum: updating
at message granularity is not sufficient. To allow for manual maintenance
of the checksum in those cases, refine `mbedtls_ssl_write_handshake_msg()`
into `mbedtls_ssl_write_handshake_msg_ext()` which takes a parameter
determining whether the checksum should be updated.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
- Improves readability
- Will be useful when we introduce MPS as an alternative msg layer.
- Will be useful when we need to reset the messaging layer upon
receipt of a HelloRetryRequest in TLS 1.3.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The AEAD additional data (AAD) is computed differently in TLS 1.3
compared to TLS 1.2, but this change hasn't yet been reflected in
the codee, rendering the current implementation of
```
mbedtls_ssl_{encrypt,decrypt}_buf()
```
not standard compliant.
This commit fixes this by adjusting the AAD extraction function
ssl_extract_add_data_from_record() and its call-sites.
Please see the documentation of the code for an explanation
of how the AAD has changed from TLS 1.2 to TLS 1.3.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds the TLS 1.3 specific internal function
```
mbedtls_ssl_tls13_populate_transform()
```
which creates an instance of the SSL transform structure
`mbedtls_ssl_transform` representing a TLS 1.3 record protection
mechanism.
It is analogous to the existing internal helper function
```
ssl_tls12_populate_transform()
```
which creates transform structures representing record
protection mechanisms in TLS 1.2 and earlier.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
In TLS 1.2 specific code, the internal helper functions
ssl_populate_transform() builds an SSL transform structure,
representing a specific record protection mechanism.
In preparation for a subsequent commit which will introduce
a similar helper function specific to TLS 1.3, this commmit
renames ssl_populate_transform() to ssl_tls12_populate_transform().
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Instances of `mbedtls_ssl_session` represent data enabling session resumption.
With the introduction of TLS 1.3, the format of this data changes. We therefore
need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish
1.2 and 1.3 sessions.
This commit introduces such a TLS-version field to mbedtls_ssl_session.
The change has a few ramifications:
- Session serialization/deserialization routines need to be adjusted.
This is achieved by adding the TLS-version after the header of
Mbed TLS version+config, and by having the subsequent structure
of the serialized data depend on the value of this field.
The details are described in terms of the RFC 8446 presentation language.
The 1.2 session (de)serialization are moved into static helper functions,
while the top-level session (de)serialization only parses the Mbed TLS
version+config header and the TLS-version field, and dispatches according
to the found version.
This way, it will be easy to add support for TLS 1.3 sessions in the future.
- Tests for session serialization need to be adjusted
- Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3,
we will need to have some logic comparing the TLS version of the proposed session
to the negotiated TLS version. For now, however, we only support TLS 1.2,
and no such logic is needed. Instead, we just store the TLS version in the
session structure at the same point when we populate mbedtls_ssl_context.minor_ver.
The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and
`mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved.
However, with both fields being private and explicitly marked so, this can happen
in a later change.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Previous code checked that the buffer was big enough for the tag size
for the given algorithm, however chachapoly finish expects a 16 byte
buffer passed in, no matter what. If we start supporting smaller
chachapoly tags in the future, this could potentially end up in buffer
overflow, so add a safety check.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
The internal verify endpoint was only calling the finish endpoint to get
a tag to compare against the tag passed in. Moved this logic to the
driver wrapper (still allowing a driver to call verify if required) and
removed the internal implementation endpoint.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
We already did this on failure, but make sure the buffer does not leak
what was in it previously on success
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
mbedtls_ecp_read_key and mbedtls_ecp_write_key are updated to include
support for Curve448 as prescribed by RFC 7748 §5.
Test suites have been updated to validate curve448 under Montgomery
curves.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Remove a check in rsa_rsassa_pkcs1_v15_encode() that
is not needed because the same check is performed
earlier. This check was added in #4707.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Fix initialization of mbedtls_psa_cipher_operation_t by not initializing the mbedtls_cipher_context_t typed field completely.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Introduce new codes:
* MBEDTLS_ERR_SSL_UNSUPPORTED_EXTENSION
* MBEDTLS_ERR_SSL_NO_APPLICATION_PROTOCOL
These are returned when the corresponding alert is raised.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
New name MBEDTLS_ERR_SSL_BAD_CERTIFICATE
Also, replace some instances of MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE
by MBEDTLS_ERR_SSL_DECODE_ERROR and MBEDTLS_ERR_SSL_ILLEGAL_PARAMETER
as fit.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Also remove preprocessor logic for MBEDTLS_CONFIG_FILE, since
build_info.h alreadyy handles it.
This commit was generated using the following script:
# ========================
#!/bin/sh
git ls-files | grep -v '^include/mbedtls/build_info\.h$' | xargs sed -b -E -i '
/^#if !?defined\(MBEDTLS_CONFIG_FILE\)/i#include "mbedtls/build_info.h"
//,/^#endif/d
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
These macros were moved into a header and now check-names.sh is failing.
Add an MBEDTL_ prefix to the macro names to make it pass.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The error is currently never returned to any function that PSA calls,
but keep mbedtls_to_psa_error up to date in case this changes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The functions mbedtls_pk_sign(), mbedtls_pk_sign_restartable(),
mbedtls_ecdsa_write_signature() and mbedtls_ecdsa_write_signature_restartable()
now take an extra parameter indicating the size of the output buffer for the
signature.
No change to RSA because for RSA, the output size is trivial to calculate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources (RFC
7748 say we MAY reject 0 as a result) and recommended by some to reject
those points (either to ensure contributory behaviour, or to protect
against timing attack when the underlying field arithmetic is not
constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Janos Follath <janos.follath@arm.com>
Without this parameter, it would be hard for callers to know how many bytes
of output the function wrote into the output buffer. It would be possible,
since the cumulated output must have the same length as the cumulated input,
but it would be cumbersome for the caller to keep track.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The persistence level PSA_KEY_PERSISTENCE_READ_ONLY can now only be used
as intended, for keys that cannot be modified through normal use of the API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_psa_get_stats() was written back before lifetimes were
structured as persistence and location. Fix its classification of
volatile external keys and internal keys with a non-default
persistence.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Clang was complaining and check-names.sh too
This only duplicates macros, so no impact on code size. In 3.0 we can
probably avoid the duplication by using an internal header under
library/ but this won't work for 2.16.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources
(RFC 7748 say we MAY reject 0 as a result) and recommended by some to
reject those points (either to ensure contributory behaviour, or to
protect against timing attack when the underlying field arithmetic is
not constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* development: (66 commits)
Document the return type change in the migration guide
Fix return type of example key export callbacks
Add change log
psa: mac: Add driver dispatch tests for psa_mac_verify
psa: mac: Add driver delegation support for psa_mac_verify()
psa: mac: Introduce psa_mac_compute_internal
psa: mac: Add driver dispatch tests for psa_mac_compute
psa: mac: Improve MAC finalization code
psa: mac: Add driver delegation support for psa_mac_compute()
psa: mac: Add MAC compute builtin implementation
psa: mac: Improve implementation of psa_mac_finalize_alg_and_key_validation()
psa: mac: Split psa_mac_setup()
psa: mac: Re-organize psa_mac_setup() internal function
Move export callback and context to the end of SSL context
Improve ChangeLog wording for key export
Remove return value from key export callback
Make key export callback and context connection-specific
Remove all occurrences of TLS < 1.2 PRF identifier
Remote key export identifier used for TLS < 1.2.
Add missing documentation for key export callback parameters
...
Ensure finish only called when encrypting and verify only called for
decrypting, and add tests to ensure this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
I wrote a function to determine the base algorithm given a variant,
however this is already implemented by
PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Where hashlen was previously ignored when the hash length could be
inferred from an md_alg parameter, the two must now match.
Adapt the existing tests accordingly. Adapt the sample programs accordingly.
This commit does not add any negative testing.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The loop exits early iff there is a nonzero limb, so i==0 means that
all limbs are 0, whether the number of limbs is 0 or not.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a bug introduced in "Fix multiplication producing a negative zero" that
caused the sign to be forced to +1 when A > 0, B < 0 and B's low-order limb
is 0.
Add a non-regression test. More generally, systematically test combinations
of leading zeros, trailing zeros and signs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In mbedtls_mpi_read_string, if the string is empty, return an empty bignum
rather than a bignum with one limb with the value 0.
Both representations are correct, so this is not, in principle, a
user-visible change. The change does leak however through
mbedtls_mpi_write_string in base 16 (but not in other bases), as it writes a
bignum with 0 limbs as "" but a bignum with the value 0 and at least one
limb as "00".
This change makes it possible to construct an empty bignum through
mbedtls_mpi_read_string, which is especially useful to construct test
cases (a common use of mbedtls_mpi_read_string, as most formats use in
production encode numbers in binary, to be read with mbedtls_mpi_read_binary
or mbedtls_mpi_read_binary_le).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix mbedtls_mpi_mul_mpi() when one of the operands is zero and the
other is negative. The sign of the result must be 1, since some
library functions do not treat {-1, 0, NULL} or {-1, n, {0}} as
representing the value 0.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Shifting TA and TB before the loop is not necessary. If A != 0, it will be
done at the start of the loop iteration. If A == 0, then lz==0 and G is
correctly set to B after 0 loop iterations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a null pointer dereference in mbedtls_mpi_exp_mod(X, A, N, E, _RR) when
A is the value 0 represented with 0 limbs.
Make the code a little more robust against similar bugs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* development: (236 commits)
Changing the key length to 32 bytes in one of the PSA cipher setup tests
Removal of RC4 certs and fixes to docs and tests
Fix fd range for select on Windows
Refactor file descriptor checks into a common function
Removing global variable and moving variant function comment block
Fix typo in doc'n of session resumption API
Code review fixes
Fix warning in some configurations
Fix cmake build of fuzz_privkey
Fix async support in ssl_server2
Improve ChangeLog and migration guide entries
Use a proper DRBG in programs
Use the dedicated dummy_random in fuzzing programs
Fix cmake build of programs
Add ChangeLog and migration guide entries
Simplify internal code
Remove "internal RNG" code from ECP
Remove config option MBEDTLS_ECP_NO_INTERNAL_RNG
Add RNG params to private key parsing
Add RNG parameter to check_pair functions
...
Remove a case that cannot be triggered as PSA_ALG_SIGN_GET_HASH always
returns 0 for raw algorithms.
Signed-off-by: Janos Follath <janos.follath@arm.com>
PSA Crypto always passed MBEDTLS_MD_NONE to Mbed TLS, which worked well
as Mbed TLS does not use this parameter for anything beyond determining
the input lengths.
Some alternative implementations however check the consistency of the
algorithm used for pre-hash and for other uses in verification (verify
operation and mask generation) and fail if they don't match. This makes
all such verifications fail.
Furthermore, the PSA Crypto API mandates that the pre-hash and internal
uses are aligned as well.
Fixes#3990.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Introduce psa_mac_compute_internal with an
additional `is_sign` parameter compared to
the psa_mac_compute API. The intent is to
call psa_mac_compute_internal() from
psa_mac_verify() as well to compute the
message MAC.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix mbedtls_net_poll() and mbedtls_net_recv_timeout() often failing with
MBEDTLS_ERR_NET_POLL_FAILED on Windows: they were testing that the file
descriptor is in range for fd_set, but on Windows socket descriptors are not
limited to a small range. Fixes#4465.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Re-organize psa_mac_setup() to prepare the move
to a dedicated function of the additional checks
on the algorithm and the key attributes done by
this function. We want to move those checks in
a dedicated function to be able to do them
without duplicating them in psa_mac_compute().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reverting some deleted tests and changing the deprecated algo
Deleting deprecated headers from /alt-dummy dir
Corrections to the comments
Removal of deleted functions from compat-2.x.h
Corrections to tests/data_files/Makefile
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
For TLS, secp256k1 is deprecated by RFC 8422 §5.1.1. For X.509,
secp256k1 is not deprecated, but it isn't used in practice, especially
in the context of TLS where there isn't much point in having an X.509
certificate which most peers do not support. So remove it from the
default profile. We can add it back later if there is demand.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rewrite mbedtls_debug_print_mpi to be simpler and smaller. Leverage
mbedtls_mpi_bitlen() instead of manually looking for the leading
zeros.
Fix#4608: the old code made an invalid memory dereference when
X->n==0 (freshly initialized bignum with the value 0).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
TLS used to prefer larger curves, under the idea that a larger curve has a
higher security strength and is therefore harder to attack. However, brute
force attacks are not a practical concern, so this was not particularly
meaningful. If a curve is considered secure enough to be allowed, then we
might as well use it.
So order curves by resource usage. The exact definition of what this means
is purposefully left open. It may include criteria such as performance and
memory usage. Risk of side channels could be a factor as well, although it
didn't affect the current choice.
The current list happens to exactly correspond to the numbers reported by
one run of the benchmark program for "full handshake/s" on my machine.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Upgrade the default list of hashes and curves allowed for TLS. The list is
now aligned with X.509 certificate verification: hashes and curves with at
least 255 bits (Curve25519 included), and RSA 2048 and above.
Remove MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE which would no
longer do anything.
Document more precisely what is allowed by default.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Upgrade the default X.509 certificate verification profile
mbedtls_x509_crt_profile_default to the former value of
mbedtls_x509_crt_profile_next, which is hashes and curves with at least 255
bits (Curve25519 included), and RSA 2048 and above.
Document more precisely what goes into the default profile.
Keep the "next" profile unchanged for now.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This makes it easier to ensure that crypto_spe.h is included everywhere it
needs to be, and that it's included early enough to do its job (it must be
included before any mention of psa_xxx() functions with external linkage,
because it defines macros to rename these functions).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We know that Montgomery multiplication will never be called without an
RNG, so make that clear from the beginning of the function.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This is necessary for the case where the public part of an EC keypair
needs to be computed from the private part - either because it was not
included (it's an optional component) or because it was compressed (a
format we can't parse).
This changes the API of two public functions: mbedtls_pk_parse_key() and
mbedtls_pk_parse_keyfile().
Tests and programs have been adapted. Some programs use a non-secure RNG
(from the test library) just to get things to compile and run; in a
future commit this should be improved in order to demonstrate best
practice.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- mbedtls_ecp_check_pub_priv() because it calls ecp_mul()
- mbedtls_pk_check_pair() because it calls the former
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
It was indirectly calling ecp_mul() without an RNG. That's actually the
rare case where this should be allowed, as ecp_muladd() is typically
used on non-secret data (to verify signatures or ZKPs) and documented as
not being constant-time.
Refactor a bit in order to keep the ability to call ecp_mul() without a
RNG, but not exposed publicly (except though muladd).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Fix trivial faulty calls in ECP test suite and ECP/ECJPAKE self-tests (by
adding a dummy RNG).
Several tests suites are not passing yet, as a couple of library
function do call ecp_mul() with a NULL RNG. The complexity of the fixes
range from "simple refactoring" to "requires API changes", so these will
be addressed in separate commits.
This makes the option MBEDTLS_ECP_NO_INTERNAL_RNG, as well as the whole
"internal RNG" code, obsolete. This will be addressed in a future
commit, after getting the test suites to pass again.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
(This commit is best reviewed using `git show -b` as indentation levels
have changed.)
The documentation already states that the RNG parameter is mandatory,
since PRs #4488 and #4515. There are several families of functions to
consider here:
- private-key operations (sign, decrypt) all call
mbedtls_rsa_private() where this commit adds a non-NULL check;
- encrypt operations need an RNG for masking/padding and already had a
non-NULL check since #4515 (conditional on \p mode before that)
- verify operations no longer take an RNG parameter since #4515
So, after this commit, all RSA functions that accept an RNG will reach a
non-NULL check before the RNG is used.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Removes conditional code blocks relating
to MBEDTLS_SSL_TRUNCATED_HMAC from ssl_cli.c
and ssl_srv.c.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removes conditional code compilation blocks
and code paths relating to the
MBEDTLS_SSL_TRUNCATED_HMAC config option.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Implement one-shot MAC APIs, psa_mac_compute and psa_mac_verify, introduced in PSA Crypto API 1.0.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
mbedtls_dhm_get_value can be seen as either a copy function or a getter
function. Given the name and the semantics, it's more of a getter, even if
it "gets" by doing a copy. Therefore, put the context first, and the
selector next, leaving the output for last.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add two functions mbedtls_dhm_get_len() and mbedtls_dhm_get_bitlen() to
query the length of the modulus in bytes or bits.
Remove the len field: the cost of calling mbedtls_dhm_get_len() each time
it's needed is negligible, and this improves the abstraction of the DHM
module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When MBEDTLS_RSA_ALT is defined, mbedtls_rsa_context does not necessarily
have fields called N and E of type mbedtls_mpi. Don't emit pk_debug
information with MBEDTLS_RSA_ALT. This is not ideal but at least the
library compiles.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
library/ecp_alt.h (declaring individual functions of the ECP module that can
be substituted, included when building the library with
MBEDTLS_ECP_INTERNAL_ALT enabled) clashes with ecp_alt.h (not provided,
declaring types of the ECP module when the whole implementation is
substituted, included when building the library with MBEDTLS_ECP_ALT enabled).
Depending on the search path during build, this can make MBEDTLS_ECP_ALT
unusable.
Rename library/ecp_alt.h to follow the naming convention of other alt headers:
MBEDTLS_XXX_ALT corresponds to xxx_alt.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
include/mbedtls/ssl.h
include/psa/crypto_struct.h
Conflicts fixed by using the code from development branch
and manually re-applying the MBEDTLS_PRIVATE wrapping.
Unrelated to RSA (only used in ECP), but while improving one
mbedtls_safe_cond_xxx function, let's improve the other as well.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
mbedtls_mpi_cf_bool_eq() is a verbatim copy of mbedtls_ssl_cf_bool_eq()
Deduplication will be part of a future task.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Remove padding parameters as mbedtls_rsa_init()
cannot return an error code when padding
parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
mbedtls_rsa_set_padding() now returns the error
code MBEDTLS_ERR_RSA_INVALID_PADDING when
padding parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This change enables automatic detection and consumption of Mbed TLS
library targets from within other CMake projects. By generating an
`MbedTLSConfig.cmake` file, consuming projects receive a more complete
view of these targets, allowing them to be used as dependencies which
properly inherit the transitive dependencies of the libraries.
This is fairly fragile, as it seems Mbed TLS's libraries do not appear
to properly model their dependencies on other targets, including
third-party dependencies. It is, however, sufficient for building and
linking the compiled Mbed TLS libraries when there are no third-party
dependencies involved. Further work is needed for more complex
use-cases, but this will likely meet the needs of most projects.
Resolves#298. Probably useful for #2857.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Calling mbedtls_mpi_cmp_int reveals the number of leading zero limbs
to an adversary who is capable of very fine-grained timing
measurements. This is very little information, but could be practical
with secp521r1 (1/512 chance of the leading limb being 0) if the
adversary can measure the precise timing of a large number of
signature operations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
ssl_server2 had a check that we never try to use a minor version lower
than 2 with DTLS, but that check is no longer needed, as there's no way
that would happen now that MBEDTLS_SSL_MINOR_VERSION_1 is no longer
public.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit removes the API
```
mbedtls_ssl_conf_ciphersuites_for_version()
```
which allows to configure lists of acceptable ciphersuites
for each supported version of SSL/TLS: SSL3, TLS 1.{0,1,2}.
With Mbed TLS 3.0, support for SSL3, TLS 1.0 and TLS 1.1
is dropped. Moreover, upcoming TLS 1.3 support has a different
notion of cipher suite and will require a different API.
This means that it's only for TLS 1.2 that we require
a ciphersuite configuration API, and
```
mbedtls_ssl_conf_ciphersuites()
```
can be used for that. The version-specific ciphersuite
configuration API `mbedtls_ssl_conf_ciphersuites_for_version()`,
in turn, is no longer needed.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The idiom "resize an mpi to a given size" appeared 4 times. Unify it
in a single function. Guarantee that the value is set to 0, which is
required by some of the callers and not a significant expense where
not required.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since the internal function mpi_fill_random_internal() assumes that X
has the right size, there is no need to call grow().
To further simplify the function, set the sign outside, and zero out
the non-randomized part directly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In real life, min << N and the probability that mbedtls_mpi_random()
fails to find a suitable value after 30 iterations is less than one in
a billion. But at least for testing purposes, it's useful to not
outright reject "silly" small values of N, and for such values, 30
iterations is not enough to have a good probability of success.
Pick 250 iterations, which is enough for cases like (min=3, N=4), but
not for cases like (min=255, N=256).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This comment is no longer in the specific context of generating a
random point on an elliptic curve.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_random() uses mbedtls_mpi_cmp_mpi_ct(), which requires its
two arguments to have the same storage size. This was not the case
when the upper bound passed to mbedtls_mpi_random() had leading zero
limbs.
Fix this by forcing the result MPI to the desired size. Since this is
not what mbedtls_mpi_fill_random() does, don't call it from
mbedtls_mpi_random(), but instead call a new auxiliary function.
Add tests to cover this and other conditions with varying sizes for
the two arguments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of generating blinding values and keys in a not-quite-uniform way
(https://github.com/ARMmbed/mbedtls/issues/4245) with copy-pasted code,
use mbedtls_mpi_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
dhm_make_common includes a piece of code that is identical to
dhm_random_below except for returning a different error code in one
case. Call dhm_random_below instead of repeating the code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
P-1 is as bad as 1 as a blinding value. Don't accept it.
The chance that P-1 would be randomly generated is infinitesimal, so
this is not a practical issue, but it makes the code cleaner. It was
inconsistent to accept P-1 as a blinding value but not as a private key.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Unify the common parts of mbedtls_dhm_make_params and mbedtls_dhm_make_public.
No intended behavior change, except that the exact error code may
change in some corner cases which are too exotic for the existing unit
tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of generating blinding values in a not-quite-uniform way
(https://github.com/ARMmbed/mbedtls/issues/4245) with copy-pasted
code, use mbedtls_mpi_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since mbedtls_mpi_random() is not specific to ECC code, move it from
the ECP module to the bignum module.
This increases the code size in builds without short Weierstrass
curves (including builds without ECC at all) that do not optimize out
unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename mbedtls_ecp_gen_privkey_sw to mbedtls_mpi_random since it has
no particular connection to elliptic curves beyond the fact that its
operation is defined by the deterministic ECDSA specification. This is
a generic function that generates a random MPI between 1 inclusive and
N exclusive.
Slightly generalize the function to accept a different lower bound,
which adds a negligible amount of complexity.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ecp_gen_privkey_mx generates a random number with a certain
top bit set. Depending on the size, it would either generate a number
with that top bit being random, then forcibly set the top bit to
1 (when high_bit is not a multiple of 8); or generate a number with
that top bit being 0, then set the top bit to 1 (when high_bit is a
multiple of 8). Change it to always generate the top bit randomly
first.
This doesn't make any difference in practice: the probability
distribution is the same either way, and no supported or plausible
curve has a size of the form 8n+1 anyway. But it slightly simplifies
reasoning about the behavior of this function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't calculate the bit-size of the initially generated random number.
This is not necessary to reach the desired distribution of private
keys, and creates a (tiny) side channel opportunity.
This changes the way the result is derived from the random number, but
does not affect the resulting distribution.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The library rejected an RNG input of all-bits-zero, which led to the
key 2^{254} (for Curve25519) having a 31/32 chance of being generated
compared to other keys. This had no practical impact because the
probability of non-compliance was 2^{-256}, but needlessly
complicated the code.
The exception was added in 98e28a74e3 to
avoid the case where b - 1 wraps because b is 0. Instead, change the
comparison code to avoid calculating b - 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For Montgomery keys, n_bits is actually the position of the highest
bit and not the number of bits, which would be 1 more (fence vs
posts). Rename the variable accordingly to lessen the confusion.
No semantic change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Put the Montgomery and short Weierstrass implementations of
mbedtls_ecp_gen_privkey into their own function which can be tested
independently, but will not be part of the public ABI/API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Prepare to isolate the Montgomery and short Weierstrass
implementations of mbedtls_ecp_gen_privkey into their own function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When mbedtls_nist_kw_wrap was called with output=NULL and out_size=0, it
performed arithmetic on the null pointer before detecting that the output
buffer is too small and returning an error code. This was unlikely to have
consequences on real-world hardware today, but it is undefined behavior and
UBSan with Clang 10 flagged it. So fix it (fix#4025).
Fix a similar-looking pattern in unwrap, though I haven't verified that it's
reachable there.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_ECP_FIXED_POINT_OPTIM aims to speed up ecc multiplication performance.
We compute the comb table in runtime now. It is a costly operation.
This patch add a pre-computed table to initialize well-known curves. It speed up ECDSA signature verify process in runtime by using more ROM size.
Signed-off-by: kXuan <kxuanobj@gmail.com>
The implementation documentation of
```
mbedtls_ssl_tls1_3_derive_early_secrets()
```
mentioned the PSK binder key, which is misleading because the
function doesn't actually calculate it.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds helper functions to ssl_tls13_keys.[ch]
allowing to derive the secrets specific to each stage of
a TLS 1.3 handshake (early, handshake, application) from
the corresponding master secret (early secret, handshake
secret, master secret).
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit makes the API
- mbedtls_ssl_get_output_max_frag_len()
- mbedtls_ssl_get_input_max_frag_len()
- mbedtls_ssl_get__max_frag_len()
for querying the state of the Maximum Fragment Length
extension internal.
Rationale: The value those APIs provide to the user is in
upper bounds for the size of incoming and outgoing records,
which can be used to size application data buffers apporpriately
before passing them to mbedtls_ssl_{read,write}(). However,
there are other factors which influence such upper bounds,
such as the MTU or other extensions (specifically, the
record_size_limit extension which is still to be implemented)
which should be taken into account.
There should be more general APIs for querying the maximum
size of incoming and outgoing records.
For the maximum size of outgoing records, we already have such,
namely mbedtls_ssl_get_max_out_record_payload().
For the maximum size of incoming records, a new API will be
added in a subsequent commit.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Public structs members are considered private and should not
be used by users application.
MBEDTLS_PRIVATE(member) macro is intended to clearly indicate
which members are private.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Some padding checks in rsa.c were
erroneously removed in a previous
commit and are restored in this
commit.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
