Use mbedtls_test_read_mpi_core() to read the test data. Among other
benefits, X and Y are now allocated to their exact size, so analyzers (Asan,
Valgrind, Coverity, ...) have a chance of complaining if the tested function
overflows the buffer.
Remove TEST_CF_PUBLIC calls which are no longer necessary.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When testing a function that is supposed to be constant-flow, we declare the
inputs as constant-flow secrets with TEST_CF_SECRET. The result of such a
function is itself a constant-flow secret, so it can't be tested with
comparison operators.
In TEST_EQUAL, TEST_LE_U and TEST_LE_S, declare the values to be compared as
public. This way, test code doesn't need to explicitly declare results as
public if they're only used by one of these macros.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This comment (which used to be attached to the implementation, and should
not have been moved to the header file) is incorrect: the library function
mbedtls_mpi_read_string preserves leading zeros as desired, but does not
create a zero-limb object for an empty string.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The length in bytes is used with the 'len' prefix and
the length in limbs is used with the 'limbs' prefix.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
Both functions are calling mbedtls_cipher_auth_[encrypt/decrypt]_ext() functions. These functions are guarded with MBEDTLS_CIPHER_MODE_AEAD || MBEDTLS_NIST_KW_C flags - make it consistent.
As a result ssl_server2 won't build now with MBEDTLS_SSL_SESSION_TICKETS enabled (mbedtls_cipher_auth_[encrypt/decrypt]_ext() functions not available).
Mark MBEDTLS_SSL_SESSION_TICKETS as dependent on MBEDTLS_CIPHER_MODE_AEAD || MBEDTLS_NIST_KW_C and disable MBEDTLS_SSL_SESSION_TICKETS in stream cipher only build.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Instead of fully validating beforehand
signature algorithms with regards to the
private key, do minimum validation and then
just try to compute the signature. If it
fails try another reasonable algorithm if any.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When selecting the server certificate based on
the signature algorithms supported by the client,
check the signature algorithms as close as possible
to the way they are checked to compute the
signature for the server to prove it possesses
the private key associated to the certificate.
That way we minimize the odds of selecting a
certificate for which the server will not be
able to compute the signature to prove it
possesses the private key associated to the
certificate.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Stating from the default config means a few things are implicitly
excluded; starting from the full config makes it all fully explicit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
CMakeLists.txt was calling generate_psa_tests.py and siblings to list the
generated test data files with a --directory option, intended the output to
be this argument textually. This used to work, but no longer does, because
the --directory argument is relative to the current directory when the
Python script is invoked, and the script now shows an absolute path.
CMakeLists.txt now completely ignores the directory part of the listed data
file paths and builds its own. The base_xxx_files variables now contain
actual base names, without a "suites/" prefix. This makes it more robust
with respect to the behavior of the Python script, but it will break if
we put data files in multiple different directories one day.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When pylint runs in parallel, it loses the ability to detect duplicated code
across modules. Duplicated code is usually a bad thing, so give pylint the
opportunity to let us know.
This makes pylint slightly slower, but going from 2 threads to 1 does not
make it anywhere close to twice as slow. On my machine, with Python 3.5,
pylint -j2 takes about 12s while single-threaded pylint takes about 16s
of wall clock time.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We had 4 identical copies of the check_repo_path function. Replace them by a
single copy in the build_tree module where it naturally belongs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_vsnprintf replacement works like mbedtls_snprintf replacement, so
copy the requirements for MBEDTLS_PLATFORM_VSNPRINTF_ALT.
(MBEDTLS_PLATFORM_xxx_MACRO shouldn't require MBEDTLS_PLATFORM_C, but that's
a separate preexisting problem which I do not try address at this time.)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We have Python code both for test code generation
(tests/scripts/generate_test_code.py) and now for test data generation.
Avoid the ambiguous expression "test generation".
This commit renames the Python module and adjusts all references to it. A
subsequent commit will adjust the documentation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Previous changes used the docstring of the test_generation module,
which does not inform a user about the script.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
As a public header, it should no longer include common.h, just use
build_info.h which is what we actually need anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Don't look for MBED keywords on the autogenerated
psa_crypto_driver_wrappers.c file. This is needed since the naming of
constants is dependent on the driver json and the naming conventions
used through the library is stuck at a place where it does not swing
either way ( mbedtls_ / psa_).
Signed-off-by: Archana <archana.madhavan@silabs.com>
Signed-off-by: Asfandyar Orakzai <asfandyar.orakzai@silabs.com>
jsonschema is added to the ci scripts and Dockerfile
Signed-off-by: Archana <archana.madhavan@silabs.com>
Signed-off-by: Asfandyar Orakzai <asfandyar.orakzai@silabs.com>
(1) Add in driver jsons.
(2) Improve Python scripts to take JSON file directory and template
directory paths as arguments.
(3) Add in file augment template files to template common functionality
(4) render tempplates for Header files, ID generation and key
management.
(5) Changed driver ID nomenclature to be in synch with function names.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Signed-off-by: Asfandyar Orakzai <asfandyar.orakzai@silabs.com>
Initializing return status variables to CORRUPTION_DETECTED is a second line
of defense in library code in case there's a code path where we forget to
assign to the variable. This isn't useful in test code. In any case, here,
we might as well define the variable at the point of use.
This fixes a build error in configurations with MBEDTLS_ERROR_C and
MBEDTLS_PSA_CRYPTO_C both disabled, because then mbedtls/error.h isn't
included so MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED isn't defined.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We used to include platform.h only when MBEDTLS_PLATFORM_C was enabled, and
to define ad hoc replacements for mbedtls_xxx functions on a case-by-case
basis when MBEDTLS_PLATFORM_C was disabled. The only reason for this
complication was to allow building individual source modules without copying
platform.h. This is not something we support or recommend anymore, so get
rid of the complication: include platform.h unconditionally.
There should be no change in behavior since just including the header should
not change the behavior of a program.
This commit replaces most occurrences of conditional inclusion of
platform.h, using the following code:
```
perl -i -0777 -pe 's!#if.*\n#include "mbedtls/platform.h"\n(#else.*\n(#define (mbedtls|MBEDTLS)_.*\n|#include <(stdarg|stddef|stdio|stdlib|string|time)\.h>\n)*)?#endif.*!#include "mbedtls/platform.h"!mg' $(git grep -l '#include "mbedtls/platform.h"')
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Wrapper function for itertools.combinations_with_replacement, with
explicit cast due to imprecise typing with older versions of mypy.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
BaseTarget-derived targets are now added to TestGenerator.targets in
initialization. This reduces repeated code in generate_xxx_tests.py
scripts which use this framework.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Especially for a sequence of similar lines of test code, or where the result of
an expression is being compared to a short integer (especially 0 or 1).
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
When generating combinations of values, `itertools.combinations` will
not allow inputs to be repeated. This is replaced so that cases where
input values match are generated, i.e. ("0", "0").
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Other programs/*/Makefile are only created by CMake, but programs/fuzz has
its own Makefile in the repository. Fixes#6247.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test certs were originally generated with an old version of Mbed TLS
that used printableString where we now use utf8string (e.g., in the
organizationName). Otherwise the certs are identical.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Version of pylint used in CI does not recognize abstract subclasses of
BaseTarget, so disable warning in these abstract classes.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Spec values are now always used for test data, and conversion to
internal representation is done in the test function.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Previous implementation mixed the test case generation and the
recursive generation calls together. A separate method is added to
generate test cases for the current class' test function. This reduces
the need to override generate_tests().
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
The unit tests were created by capturing runs of the existing function during
execution of existing unit tests.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
The test cases use the following MPI values:
0 1 fffe ffffffff 100000000 20000000000000 ffffffffffffffff
10000000000000000 1234567890abcdef0 fffffffffffffffffefefefefefefefe
100000000000000000000000000000000 1234567890abcdef01234567890abcdef0
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
1234567890abcdef01234567890abcdef01234567890abcdef01234567890abcdef0
4df72d07b4b71c8dacb6cffa954f8d88254b6277099308baf003fab73227f34029643b5a263f66e0d3c3fa297ef71755efd53b8fb6cb812c6bbf7bcf179298bd9947c4c8b14324140a2c0f5fad7958a69050a987a6096e9f055fb38edf0c5889eca4a0cfa99b45fbdeee4c696b328ddceae4723945901ec025076b12b
and the following scalars. The .data files include two sets of results (final
accumulator and carry) for the cases sizeof(mbedtls_mpi_uint) == 4 or 8.
0 3 fe ff ffff 10000 ffffffff 100000000 7f7f7f7f7f7f7f7f 8000000000000000
fffffffffffffffe
The lines in the .data file were generated by the following script
#!/usr/bin/env perl
#
# mpi-test-core-mla.pl - generate/run MPI tests in Perl for mbedtls_mpi_core_mla()
#
use strict;
use warnings;
use Math::BigInt;
use sort 'stable';
my @mla_mpis = qw(
0 1 fffe ffffffff 100000000 20000000000000 ffffffffffffffff
10000000000000000 1234567890abcdef0 fffffffffffffffffefefefefefefefe
100000000000000000000000000000000 1234567890abcdef01234567890abcdef0
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
1234567890abcdef01234567890abcdef01234567890abcdef01234567890abcdef0
4df72d07b4b71c8dacb6cffa954f8d88254b6277099308baf003fab73227f34029643b5a263f66e0d3c3fa297ef71755efd53b8fb6cb812c6bbf7bcf179298bd9947c4c8b14324140a2c0f5fad7958a69050a987a6096e9f055fb38edf0c5889eca4a0cfa99b45fbdeee4c696b328ddceae4723945901ec025076b12b
);
my @mla_scalars = qw(
0 3 fe ff ffff 10000 ffffffff 100000000 7f7f7f7f7f7f7f7f 8000000000000000
fffffffffffffffe
);
my @mla_full_mpis = qw(
0 1 3 f fe ff 100 ff00 fffe ffff 10000
fffffffe ffffffff 100000000 1f7f7f7f7f7f7f
8000000000000000 fefefefefefefefe fffffffffffffffe ffffffffffffffff
10000000000000000 1234567890abcdef0
fffffffffffffffffefefefefefefefe fffffffffffffffffffffffffffffffe ffffffffffffffffffffffffffffffff
100000000000000000000000000000000 1234567890abcdef01234567890abcdef0
fffffffffffffffffffffffffffffffffffffffffffffffffefefefefefefefe
fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
10000000000000000000000000000000000000000000000000000000000000000
1234567890abcdef01234567890abcdef01234567890abcdef01234567890abcdef0
4df72d07b4b71c8dacb6cffa954f8d88254b6277099308baf003fab73227f34029643b5a263f66e0d3c3fa297ef71755efd53b8fb6cb812c6bbf7bcf179298bd9947c4c8b14324140a2c0f5fad7958a69050a987a6096e9f055fb38edf0c5889eca4a0cfa99b45fbdeee4c696b328ddceae4723945901ec025076b12b
);
my @mla_full_scalars = qw(
0 1 3 f fe ff 100 ff00 fffe ffff 10000
fffffffe ffffffff 100000000
8000000000000000 fefefefefefefefe fffffffffffffffe ffffffffffffffff
);
generate_tests();
sub generate_tests {
generate_mbedtls_mpi_core_mla();
}
sub generate_mbedtls_mpi_core_mla {
my $sub_name = (caller(0))[3]; # e.g. main::generate_mbedtls_mpi_sub_mpi
my ($ignore, $test_name) = split("main::generate_", $sub_name);
my @cases = ();
for my $ah (@mla_mpis) {
for my $bh (@mla_mpis) {
for my $ch (@mla_scalars) {
# a += b * c (c is scalar)
# a_len >= b_len. need carry out.
my $a = Math::BigInt->from_hex($ah);
my $b = Math::BigInt->from_hex($bh);
my $c = Math::BigInt->from_hex($ch);
my $max = ($a > $b) ? $a : $b;
my $bound4 = bound_mpi4($max);
my $bound8 = bound_mpi8($max);
my $r = $a + $b * $c;
my ($r4, $cy4) = ($r->copy(), 0);
my ($r8, $cy8) = ($r->copy(), 0);
($cy4, $r4) = $r4->bdiv($bound4);
($cy8, $r8) = $r8->bdiv($bound8);
my $rh4 = $r4->to_hex();
my $rh8 = $r8->to_hex();
my $cyh4 = $cy4->to_hex();
my $cyh8 = $cy8->to_hex();
# If the scalar c is too big for 1 x 4-byte MPI, we can only run this test on a system with 8-byte MPIs
my $depends = mpi4s($c) > 1 ? "MBEDTLS_HAVE_INT64" : "";
my $desc = "$test_name #NUMBER: 0x$ah + 0x$bh * 0x$ch = (0x$rh4, carry 0x$cyh4)/(0x$rh8, carry 0x$cyh8)EXPLAIN";
my $case = output($test_name, str($ah), str($bh), str($ch), str($rh4), str($cyh4), str($rh8), str($cyh8));
push(@cases, [$case, $desc, $depends]);
}
}
}
output_cases(" (for when sizeof(mbedtls_mpi_uint) == 4/8)", @cases);
}
sub output_cases {
my ($explain, @cases) = @_;
my $count = 1;
for my $c (@cases) {
my ($case, $desc, $dep) = @$c;
$desc =~ s/NUMBER/$count/; $count++;
if (defined($explain) && $desc =~ /EXPLAIN/) {
$desc =~ s/EXPLAIN/$explain/;
$explain = "";
}
my $depends = "";
$depends = "depends_on:$dep\n" if defined($dep) && length($dep);
print <<EOF;
$desc
$depends$case
EOF
}
}
# The first number (a power of 2) that won't fit in the number of MPIs
# needed for the given number
sub bound_mpi4 {
my $one = Math::BigInt->new(1); # blsft modifies caller
return $one->blsft(bits_mpi4($_[0]));
}
sub bound_mpi8 {
my $one = Math::BigInt->new(1); # blsft modifies caller
return $one->blsft(bits_mpi8($_[0]));
}
# How many bits (a multiple of 32) needed to store the specified number
# when using 4-byte MPIs
sub bits_mpi4 {
return 32 * mpi4s($_[0]);
}
# How many bits (a multiple of 64) needed to store the specified number
# when using 8-byte MPIs
sub bits_mpi8 {
return 64 * mpi8s($_[0]);
}
# How many 4-byte MPIs needed to store the specified number
sub mpi4s {
my ($n) = @_;
my $h = $n->to_hex();
return int((length($h) + 7) / 8);
}
# How many 8-byte MPIs needed to store the specified number
sub mpi8s {
my ($n) = @_;
my $h = $n->to_hex();
return int((length($h) + 15) / 16);
}
sub output {
#run_test(@_);
return join(":", @_);
}
sub str {
return '"' . $_[0] . '"';
}
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
The test cases use the following MPI values.
The .data file includes two results, for the cases when
sizeof(mbedtls_mpi_uint) == 4 or 8.
0 1 3 f fe ff 100 ff00 fffe ffff 10000
fffffffe ffffffff 100000000 1f7f7f7f7f7f7f
8000000000000000 fefefefefefefefe fffffffffffffffe ffffffffffffffff
10000000000000000 1234567890abcdef0
fffffffffffffffffefefefefefefefe fffffffffffffffffffffffffffffffe
ffffffffffffffffffffffffffffffff 100000000000000000000000000000000
1234567890abcdef01234567890abcdef0
fffffffffffffffffffffffffffffffffffffffffffffffffefefefefefefefe
fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
10000000000000000000000000000000000000000000000000000000000000000
1234567890abcdef01234567890abcdef01234567890abcdef01234567890abcdef0
4df72d07b4b71c8dacb6cffa954f8d88254b6277099308baf003fab73227f34029643b5a263f66e0d3c3fa297ef71755efd53b8fb6cb812c6bbf7bcf179298bd9947c4c8b14324140a2c0f5fad7958a69050a987a6096e9f055fb38edf0c5889eca4a0cfa99b45fbdeee4c696b328ddceae4723945901ec025076b12b
The lines in the .data file were generated by the following script
#!/usr/bin/env perl
#
# mpi-test-core-sub.pl - generate/run MPI tests in Perl for mbedtls_mpi_core_sub()
#
use strict;
use warnings;
use Math::BigInt;
use sort 'stable';
my @sub_mpis = qw(
0 1 3 f fe ff 100 ff00 fffe ffff 10000
fffffffe ffffffff 100000000 1f7f7f7f7f7f7f
8000000000000000 fefefefefefefefe fffffffffffffffe ffffffffffffffff
10000000000000000 1234567890abcdef0
fffffffffffffffffefefefefefefefe fffffffffffffffffffffffffffffffe ffffffffffffffffffffffffffffffff
100000000000000000000000000000000 1234567890abcdef01234567890abcdef0
fffffffffffffffffffffffffffffffffffffffffffffffffefefefefefefefe
fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
10000000000000000000000000000000000000000000000000000000000000000
1234567890abcdef01234567890abcdef01234567890abcdef01234567890abcdef0
4df72d07b4b71c8dacb6cffa954f8d88254b6277099308baf003fab73227f34029643b5a263f66e0d3c3fa297ef71755efd53b8fb6cb812c6bbf7bcf179298bd9947c4c8b14324140a2c0f5fad7958a69050a987a6096e9f055fb38edf0c5889eca4a0cfa99b45fbdeee4c696b328ddceae4723945901ec025076b12b
);
generate_tests();
sub generate_tests {
generate_mbedtls_mpi_core_sub();
}
sub generate_mbedtls_mpi_core_sub {
my $sub_name = (caller(0))[3]; # e.g. main::generate_mbedtls_mpi_sub_mpi
my ($ignore, $test_name) = split("main::generate_", $sub_name);
my @cases = ();
for my $ah (@sub_mpis) {
for my $bh (@sub_mpis) {
my $a = Math::BigInt->from_hex($ah);
my $b = Math::BigInt->from_hex($bh);
my ($rh4, $rh8, $carry);
if ($a >= $b) {
my $r = $a - $b;
$rh4 = $rh8 = $r->to_hex();
$carry = 0;
} else {
my $r4 = bound_mpi4($b) + $a - $b;
my $r8 = bound_mpi8($b) + $a - $b;
$rh4 = $r4->to_hex();
$rh8 = $r8->to_hex();
$carry = 1;
}
my $desc = "$test_name #NUMBER: 0x$ah - 0x$bh = 0x$rh4/${rh8}EXPLAIN, carry ${carry}";
my $case = output($test_name, str($ah), str($bh), str($rh4), str($rh8), $carry);
push(@cases, [$case, $desc]);
}
}
output_cases(" (for when sizeof(mbedtls_mpi_uint) == 4/8)", @cases);
}
sub output_cases {
my ($explain, @cases) = @_;
my $count = 1;
for my $c (@cases) {
my ($case, $desc, $dep) = @$c;
$desc =~ s/NUMBER/$count/; $count++;
if (defined($explain) && $desc =~ /EXPLAIN/) {
$desc =~ s/EXPLAIN/$explain/;
$explain = "";
}
my $depends = "";
$depends = "depends_on:$dep\n" if defined($dep) && length($dep);
print <<EOF;
$desc
$depends$case
EOF
}
}
# The first number (a power of 2) that won't fit in the number of MPIs
# needed for the given number
sub bound_mpi4 {
my $one = Math::BigInt->new(1); # blsft modifies caller
return $one->blsft(bits_mpi4($_[0]));
}
sub bound_mpi8 {
my $one = Math::BigInt->new(1); # blsft modifies caller
return $one->blsft(bits_mpi8($_[0]));
}
# How many bits (a multiple of 32) needed to store the specified number
# when using 4-byte MPIs
sub bits_mpi4 {
return 32 * mpi4s($_[0]);
}
# How many bits (a multiple of 64) needed to store the specified number
# when using 8-byte MPIs
sub bits_mpi8 {
return 64 * mpi8s($_[0]);
}
# How many 4-byte MPIs needed to store the specified number
sub mpi4s {
my ($n) = @_;
my $h = $n->to_hex();
return int((length($h) + 7) / 8);
}
# How many 8-byte MPIs needed to store the specified number
sub mpi8s {
my ($n) = @_;
my $h = $n->to_hex();
return int((length($h) + 15) / 16);
}
sub output {
return join(":", @_);
}
sub str {
return '"' . $_[0] . '"';
}
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
The test cases use the following MPI values.
The .data file only includes those (a, b) values where a <= b, and gives the
sum unconditionally; the test code exercises a >= b and cond == 0 using these
values. The .data file gives two values for the carry out, which are for when
sizeof(mbedtls_mpi_uint) == 4 or 8.
0 1 3 f fe ff 100 ff00 fffe ffff 10000
fffffffe ffffffff 100000000 1f7f7f7f7f7f7f
8000000000000000 fefefefefefefefe fffffffffffffffe ffffffffffffffff
10000000000000000 1234567890abcdef0
fffffffffffffffffefefefefefefefe fffffffffffffffffffffffffffffffe
ffffffffffffffffffffffffffffffff 100000000000000000000000000000000
1234567890abcdef01234567890abcdef0
fffffffffffffffffffffffffffffffffffffffffffffffffefefefefefefefe
fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
10000000000000000000000000000000000000000000000000000000000000000
1234567890abcdef01234567890abcdef01234567890abcdef01234567890abcdef0
4df72d07b4b71c8dacb6cffa954f8d88254b6277099308baf003fab73227f34029643b5a263f66e0d3c3fa297ef71755efd53b8fb6cb812c6bbf7bcf179298bd9947c4c8b14324140a2c0f5fad7958a69050a987a6096e9f055fb38edf0c5889eca4a0cfa99b45fbdeee4c696b328ddceae4723945901ec025076b12b
The lines in the .data file were generated by the following script
```
#!/usr/bin/env perl
#
# mpi-test-core-add-if.pl - generate MPI tests in Perl for mbedtls_mpi_core_add_if()
#
use strict;
use warnings;
use Math::BigInt;
use sort 'stable';
my @add_mpis = qw(
0 1 3 f fe ff 100 ff00 fffe ffff 10000
fffffffe ffffffff 100000000 1f7f7f7f7f7f7f
8000000000000000 fefefefefefefefe fffffffffffffffe ffffffffffffffff
10000000000000000 1234567890abcdef0
fffffffffffffffffefefefefefefefe fffffffffffffffffffffffffffffffe ffffffffffffffffffffffffffffffff
100000000000000000000000000000000 1234567890abcdef01234567890abcdef0
fffffffffffffffffffffffffffffffffffffffffffffffffefefefefefefefe
fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe
ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
10000000000000000000000000000000000000000000000000000000000000000
1234567890abcdef01234567890abcdef01234567890abcdef01234567890abcdef0
4df72d07b4b71c8dacb6cffa954f8d88254b6277099308baf003fab73227f34029643b5a263f66e0d3c3fa297ef71755efd53b8fb6cb812c6bbf7bcf179298bd9947c4c8b14324140a2c0f5fad7958a69050a987a6096e9f055fb38edf0c5889eca4a0cfa99b45fbdeee4c696b328ddceae4723945901ec025076b12b
);
generate_tests();
sub generate_tests {
generate_mbedtls_mpi_core_add_if();
}
sub generate_mbedtls_mpi_core_add_if {
my $sub_name = (caller(0))[3]; # e.g. main::generate_mbedtls_mpi_add_mpi
my ($ignore, $test_name) = split("main::generate_", $sub_name);
my @cases = ();
for my $ah (@add_mpis) {
for my $bh (@add_mpis) {
my $a = Math::BigInt->from_hex($ah);
my $b = Math::BigInt->from_hex($bh);
next if $a > $b; # don't need to repeat test cases
# $b is the larger (or equal) of the two numbers. That's the number of limbs
# we'll be using.
my $bound4 = bound_mpi4($b);
my $bound8 = bound_mpi8($b);
my $r = $a + $b;
my ($r4, $carry4) = ($r->copy(), 0);
my ($r8, $carry8) = ($r->copy(), 0);
($carry4, $r4) = $r4->bdiv($bound4);
($carry8, $r8) = $r8->bdiv($bound8);
my $rh4 = $r4->to_hex();
my $rh8 = $r8->to_hex();
my $desc = "$test_name #NUMBER: 0x$ah + 0x$bh = (0x$rh4, carry $carry4)/(0x$rh8, carry $carry8)EXPLAIN";
my $case = output($test_name, str($ah), str($bh), str($rh4), $carry4, str($rh8), $carry8);
push(@cases, [$case, $desc]);
}
}
output_cases(" (for when sizeof(mbedtls_mpi_uint) == 4/8)", @cases);
}
sub output_cases {
my ($explain, @cases) = @_;
my $count = 1;
for my $c (@cases) {
my ($case, $desc, $dep) = @$c;
$desc =~ s/NUMBER/$count/; $count++;
if (defined($explain) && $desc =~ /EXPLAIN/) {
$desc =~ s/EXPLAIN/$explain/;
$explain = "";
}
my $depends = "";
$depends = "depends_on:$dep\n" if defined($dep) && length($dep);
print <<EOF;
$desc
$depends$case
EOF
}
}
# The first number (a power of 2) that won't fit in the number of MPIs
# needed for the given number
sub bound_mpi4 {
my $one = Math::BigInt->new(1); # blsft modifies caller
return $one->blsft(bits_mpi4($_[0]));
}
sub bound_mpi8 {
my $one = Math::BigInt->new(1); # blsft modifies caller
return $one->blsft(bits_mpi8($_[0]));
}
# How many bits (a multiple of 32) needed to store the specified number
# when using 4-byte MPIs
sub bits_mpi4 {
return 32 * mpi4s($_[0]);
}
# How many bits (a multiple of 64) needed to store the specified number
# when using 8-byte MPIs
sub bits_mpi8 {
return 64 * mpi8s($_[0]);
}
# How many 4-byte MPIs needed to store the specified number
sub mpi4s {
my ($n) = @_;
my $h = $n->to_hex();
return int((length($h) + 7) / 8);
}
# How many 8-byte MPIs needed to store the specified number
sub mpi8s {
my ($n) = @_;
my $h = $n->to_hex();
return int((length($h) + 15) / 16);
}
sub output {
return join(":", @_);
}
sub str {
return '"' . $_[0] . '"';
}
```
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
PSK hash alg of server is sha256. If client send only
tls-aes-256-gcm-384, there is no valid ciphersuite
available, handshake should be abort.
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
A number of places lacked the necessary dependencies on one of
the used features: MD, key exchange with certificate,
entropy, or ETM.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The same elements are now also used when MBEDTLS_USE_PSA_CRYPTO
is defined and respective SHA / MD5 defines are missing.
A new set of macros added in #6065 is used to reflect these dependencies.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The same elements are now also used when MBEDTLS_USE_PSA_CRYPTO
is defined and respective SHA / MD5 defines are missing.
A new set of macros added in #6065 is used to reflect these dependencies.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
TEST_EQUAL(), has the benefit of outputting the values that don't match,
which can make debugging simpler.
Scope:
- Recently added new test functions
- Checks making sure the test case/data is consistent is out of scope
- Only checks where printing the values is likely to be helpful
Signed-off-by: Janos Follath <janos.follath@arm.com>
MBEDTLS_CMAC_C dependency is ivalid.
"PEM read (unknown encryption algorithm)" needs MBEDTLS_CIPHER_MODE_CBC dependency as
otherwise this test is failing in test_when_no_ciphersuites_have_mac configuration
because mbedtls_pem_read_buffer() returns a different error (MBEDTLS_ERR_PEM_FEATURE_UNAVAILABLE).
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
- Improve test descriptions
- Add more test cases with return value of 1
- Remove the mbedtls prefix from the test function
Signed-off-by: Janos Follath <janos.follath@arm.com>
Add tests for a case in ECDSA signing where an invalid public
key is accepted in signature verification.
Test data taken from the OSS-fuzz issue, and additional
generated with python-ecdsa.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
MBEDTLS_SSL_IANA_TLS_GROUP_SECP192R1 and friends are not members of the mbedtls_ecp_group_id enum
Found by clang's -Wassign-enum
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
This is done to be able to bild test_psa_crypto_config_accel_hash component where MD5 is only available accelerated (PSA_WANT_ALG_MD5 is enabled and MBEDTLS_MD5_C is disabled) but MBEDTLS_USE_PSA_CRYPTO is disabled.
So the build should not attempt to enable pem_pbkdf1.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Test cases added to check curve parameters and information for each
curve supported. Expected parameters are taken from references: SEC 2
for NIST, RFC 5639 for Brainpool, and RFC 7748 for curve25519/curve448.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
- Instead of macros, use direct calculations for array sizes
- Move variable declarations closer to first use
Signed-off-by: Janos Follath <janos.follath@arm.com>
Previously these tests depended on the definition from
inside the MD module, which in turn could be 32 or 64
bytes depending on whether MBEDTLS_SHA512_C was
defined. This is unnecessary, so a constant is itnroduced
instead.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Previously the whole .function file had a global dependency on
MBEDTLS_SHA1_C. This hasn't been correct for a long time:
- on principle, dependency declarations in .function files are for
compile-time dependencies;
- in practice, a number of test cases do not depend on SHA-1, as they only
use SHA-256 or SHA-512 - those cases should not be skipped in builds
without SHA-1;
- this was "taken advantage of" to skip dependency declarations for
test cases that only depended on SHA-1.
The previous commit removed the global dependency on SHA1_C; as a result
the test cases that actually depend on SHA-1 were not skipped in builds
without SHA-1. This commit fixes that by adding dependency declarations
where they belong: in the .data file.
All cases compute hashes using MD is available, or PSA otherwise; so
MD_OR_PSA is appropriate here.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
sed -i -f md_or_psa_hash.sed \
tests/suites/test_suite_pkcs1_v21.data
tests/suites/test_suite_pk.data
with md_or_psa_hash.sed containing:
s/MBEDTLS_MD5_C/MBEDTLS_HAS_ALG_MD5_VIA_MD_OR_PSA/g
s/MBEDTLS_RIPEMD160_C/MBEDTLS_HAS_ALG_RIPEMD160_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA1_C/MBEDTLS_HAS_ALG_SHA_1_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA224_C/MBEDTLS_HAS_ALG_SHA_224_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA256_C/MBEDTLS_HAS_ALG_SHA_256_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA384_C/MBEDTLS_HAS_ALG_SHA_384_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA512_C/MBEDTLS_HAS_ALG_SHA_512_VIA_MD_OR_PSA/g
(The only lines in pk.data that still had old-style dependencies where
the ones about PKCS1_V21.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Previously MD_C was auto-enabled based on the fact that ALG_RSA_PSS was
requested, but that's no longer the case since the previous commit.
We can fix this in one of two ways: either enable MD_C, or enable all
the PSA_WANT_ALG_SHA_xxx that are needed for test. Go for MD_C because
it's a single line and avoids having to enumerate a list that might grow
in the future.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Test coverage not there yet, as the entire test_suite_pkcs1_v21 is
skipped so far - dependencies to be adjusted in a future commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Internal macros are not present as symbols, visible or usable outside
the compilation unit and it is safe to allow them to have a name without
namespace prefix.
We also allow them to start with lower case letters as some of our
internal macros already have names like that.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Tests function with various ECP point conditions, covering freshly
initialized, zeroed, non-zero, and freed points.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
When USE_PSA_INIT() failed because lack of seedfile, mbedtls_x509write_csr_free()
crashed when called on an unitialized mbedtls_x509write_csr struct.
This moves mbedtls_x509write_csr_init before calling USE_PSA_INIT(),
which could probably fail, and uses the same flow in x509_csr_check()
and x509_csr_check_opaque().
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Adds python script for generation of bignum test cases, with initial
classes for mpi_cmp_mpi test cases. Build scripts are updated to
generate test data.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Unfortunately reusing the new function from the signed constant time
comparison is not trivial.
One option would be to do temporary conditional swaps which would prevent
qualifying input to const. Another way would be to add an additional
flag for the sign and make it an integral part of the computation, which
would defeat the purpose of having an unsigned core comparison.
Going with two separate function for now and the signed version can be
retired/compiled out with the legacy API eventually.
The new function in theory could be placed into either
`library/constant_time.c` or `library/bignum_new.c`. Going with the
first as the other functions in the second are not constant time yet and
this distinction seems more valuable for new (as opposed to belonging to
the `_core` functions.
Signed-off-by: Janos Follath <janos.follath@arm.com>
- We don't check for NULL pointers this deep in the library
- Accessing a NULL pointer when the limb number is 0 as a mistake is the
very similar to any other out of bounds access
- We could potentially mandate at least 1 limb representation for 0 but
we either would need to enforce it or the implementation would be less
robust.
- Allowing zero limb representation - (NULL, 0) in particular - for zero
is present in the legacy interface, if we disallow it, the
compatibility code will need to deal with this (more code size and
opportunities for mistakes)
In summary, interpreting (NULL, 0) as the number zero in the core
interface is the least of the two evils.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The test case where there were extra limbs in the MPI failed and this
commit contains the corresponding fix as well. (We used to use the
minimum required limbs instead of the actual limbs present.)
Signed-off-by: Janos Follath <janos.follath@arm.com>
Test data which is compared as a hex string now uses upper case to
match output of mbedtls_mpi_write_string() output. This removes usage
of strcasecmp().
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Cases where radix was explictly declared are removed in most cases,
replaced using script. bignum arguments are represented as hexadecimal
strings. This reduces clutter in test data and makes bit patterns
clearer.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
When USE_PSA is disabled and ECDSA_DETERMINISTIC is enabled, generating
ECDSA signatures via PK requires use of the hash via the MD layer (in
HMAC-DRBG, used by deterministic ECDSA).
When USE_PSA is enabled, ECDSA signatures via PK go through PSA which
always uses non-deterministic ECDSA, so does not rely on HMAC-DRBG/MD.
The condition used here is slightly too strong, but expressing exactly
the optimal condition seems more effort than it's worth for just 3 test
cases.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Allow PSK exchange mode on GnuTLS server for
NewSessionTicket message test as otherwise
the GnuTLS server does not send tickets.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Using VIA_MD_OR_PSA_BASED_ON_USE_PSA was justified by the fact that
until a few commits ago, the test functions here computed hashes using
either MD or PSA, depending on whether USE_PSA was defined (which itself
was justified by the loose reasoning that "PK is USE_PSA territory").
A few commits ago, test code stopped computing hashes because the hash
values became part of the test data. PK itself does not compute hashes.
As a result, VIA_MD_OR_PSA_BASED_ON_USE_PSA is no longer justified.
There are now two kinds of tests:
- those that only rely on hash data (ECDSA, RSA PKCS#1 v1.5) should
depend on VIA_LOWLEVEL_OR_PSA as that is the minimal dependency, hence
the one used for data
- those that were the layer below PK will internally compute a hash (RSA
PKCS#1 v2.1): currently this hash is always computed using MD (on which
MBEDTLS_PKCS1_V21 depends), so legacy dependencies like MBEDTLS_SHA256_C
should be used for now. The previous dependency was morally wrong, it
didn't show in the driver-only tests only because PKCS#1 v2.1 is
disabled in this test for now.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Fix usage with sed:
s/MBEDTLS_OR_PSA_WANT_\([A-Z_0-9]*\)/MBEDTLS_HAS_\1_VIA_LOWLEVEL_OR_PSA/
s/MBEDTLS_USE_PSA_WANT_\([A-Z_0-9]*\)/MBEDTLS_HAS_\1_VIA_MD_OR_PSA_BASED_ON_USE_PSA/
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
