Test cases added to check curve parameters and information for each
curve supported. Expected parameters are taken from references: SEC 2
for NIST, RFC 5639 for Brainpool, and RFC 7748 for curve25519/curve448.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
- Instead of macros, use direct calculations for array sizes
- Move variable declarations closer to first use
Signed-off-by: Janos Follath <janos.follath@arm.com>
Previously these tests depended on the definition from
inside the MD module, which in turn could be 32 or 64
bytes depending on whether MBEDTLS_SHA512_C was
defined. This is unnecessary, so a constant is itnroduced
instead.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Previously the whole .function file had a global dependency on
MBEDTLS_SHA1_C. This hasn't been correct for a long time:
- on principle, dependency declarations in .function files are for
compile-time dependencies;
- in practice, a number of test cases do not depend on SHA-1, as they only
use SHA-256 or SHA-512 - those cases should not be skipped in builds
without SHA-1;
- this was "taken advantage of" to skip dependency declarations for
test cases that only depended on SHA-1.
The previous commit removed the global dependency on SHA1_C; as a result
the test cases that actually depend on SHA-1 were not skipped in builds
without SHA-1. This commit fixes that by adding dependency declarations
where they belong: in the .data file.
All cases compute hashes using MD is available, or PSA otherwise; so
MD_OR_PSA is appropriate here.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
sed -i -f md_or_psa_hash.sed \
tests/suites/test_suite_pkcs1_v21.data
tests/suites/test_suite_pk.data
with md_or_psa_hash.sed containing:
s/MBEDTLS_MD5_C/MBEDTLS_HAS_ALG_MD5_VIA_MD_OR_PSA/g
s/MBEDTLS_RIPEMD160_C/MBEDTLS_HAS_ALG_RIPEMD160_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA1_C/MBEDTLS_HAS_ALG_SHA_1_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA224_C/MBEDTLS_HAS_ALG_SHA_224_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA256_C/MBEDTLS_HAS_ALG_SHA_256_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA384_C/MBEDTLS_HAS_ALG_SHA_384_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA512_C/MBEDTLS_HAS_ALG_SHA_512_VIA_MD_OR_PSA/g
(The only lines in pk.data that still had old-style dependencies where
the ones about PKCS1_V21.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Tests function with various ECP point conditions, covering freshly
initialized, zeroed, non-zero, and freed points.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
When USE_PSA_INIT() failed because lack of seedfile, mbedtls_x509write_csr_free()
crashed when called on an unitialized mbedtls_x509write_csr struct.
This moves mbedtls_x509write_csr_init before calling USE_PSA_INIT(),
which could probably fail, and uses the same flow in x509_csr_check()
and x509_csr_check_opaque().
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Unfortunately reusing the new function from the signed constant time
comparison is not trivial.
One option would be to do temporary conditional swaps which would prevent
qualifying input to const. Another way would be to add an additional
flag for the sign and make it an integral part of the computation, which
would defeat the purpose of having an unsigned core comparison.
Going with two separate function for now and the signed version can be
retired/compiled out with the legacy API eventually.
The new function in theory could be placed into either
`library/constant_time.c` or `library/bignum_new.c`. Going with the
first as the other functions in the second are not constant time yet and
this distinction seems more valuable for new (as opposed to belonging to
the `_core` functions.
Signed-off-by: Janos Follath <janos.follath@arm.com>
- We don't check for NULL pointers this deep in the library
- Accessing a NULL pointer when the limb number is 0 as a mistake is the
very similar to any other out of bounds access
- We could potentially mandate at least 1 limb representation for 0 but
we either would need to enforce it or the implementation would be less
robust.
- Allowing zero limb representation - (NULL, 0) in particular - for zero
is present in the legacy interface, if we disallow it, the
compatibility code will need to deal with this (more code size and
opportunities for mistakes)
In summary, interpreting (NULL, 0) as the number zero in the core
interface is the least of the two evils.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The test case where there were extra limbs in the MPI failed and this
commit contains the corresponding fix as well. (We used to use the
minimum required limbs instead of the actual limbs present.)
Signed-off-by: Janos Follath <janos.follath@arm.com>
Test data which is compared as a hex string now uses upper case to
match output of mbedtls_mpi_write_string() output. This removes usage
of strcasecmp().
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Cases where radix was explictly declared are removed in most cases,
replaced using script. bignum arguments are represented as hexadecimal
strings. This reduces clutter in test data and makes bit patterns
clearer.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
When USE_PSA is disabled and ECDSA_DETERMINISTIC is enabled, generating
ECDSA signatures via PK requires use of the hash via the MD layer (in
HMAC-DRBG, used by deterministic ECDSA).
When USE_PSA is enabled, ECDSA signatures via PK go through PSA which
always uses non-deterministic ECDSA, so does not rely on HMAC-DRBG/MD.
The condition used here is slightly too strong, but expressing exactly
the optimal condition seems more effort than it's worth for just 3 test
cases.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Using VIA_MD_OR_PSA_BASED_ON_USE_PSA was justified by the fact that
until a few commits ago, the test functions here computed hashes using
either MD or PSA, depending on whether USE_PSA was defined (which itself
was justified by the loose reasoning that "PK is USE_PSA territory").
A few commits ago, test code stopped computing hashes because the hash
values became part of the test data. PK itself does not compute hashes.
As a result, VIA_MD_OR_PSA_BASED_ON_USE_PSA is no longer justified.
There are now two kinds of tests:
- those that only rely on hash data (ECDSA, RSA PKCS#1 v1.5) should
depend on VIA_LOWLEVEL_OR_PSA as that is the minimal dependency, hence
the one used for data
- those that were the layer below PK will internally compute a hash (RSA
PKCS#1 v2.1): currently this hash is always computed using MD (on which
MBEDTLS_PKCS1_V21 depends), so legacy dependencies like MBEDTLS_SHA256_C
should be used for now. The previous dependency was morally wrong, it
didn't show in the driver-only tests only because PKCS#1 v2.1 is
disabled in this test for now.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Fix usage with sed:
s/MBEDTLS_OR_PSA_WANT_\([A-Z_0-9]*\)/MBEDTLS_HAS_\1_VIA_LOWLEVEL_OR_PSA/
s/MBEDTLS_USE_PSA_WANT_\([A-Z_0-9]*\)/MBEDTLS_HAS_\1_VIA_MD_OR_PSA_BASED_ON_USE_PSA/
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We had a message in the data file, and were computing its hash in the
test function. It is more efficient (and simpler when it comes to
dependencies) to directly have the message hash in the data file.
It was probably this way because some test vectors provide the message
for the sake of all-in-one implementation that hash-and-sign at once.
But our API gets a hash as the input and signs it. In unit tests, this
should be reflected in the signature of the test function, which should
take a hash as input.
The changes to the .data file were done using the following python
script:
import hashlib
suite = 'pkcs1_v21'
functions = {
'pkcs1_rsassa_pss_sign': (6, 8),
'pkcs1_rsassa_pss_verify': (4, 6),
'pkcs1_rsassa_pss_verify_ext': (4, 8),
}
def hash_ctx(s):
if s == 'MBEDTLS_MD_MD5':
return hashlib.md5()
if s == 'MBEDTLS_MD_SHA1':
return hashlib.sha1()
if s == 'MBEDTLS_MD_SHA224':
return hashlib.sha224()
if s == 'MBEDTLS_MD_SHA256':
return hashlib.sha256()
if s == 'MBEDTLS_MD_SHA384':
return hashlib.sha384()
if s == 'MBEDTLS_MD_SHA512':
return hashlib.sha512()
def fix(l):
parts = l.rstrip().split(":")
fun = parts[0]
if fun not in functions:
return l
(digest_idx, msg_idx) = functions[fun]
alg_str = parts[digest_idx]
if alg_str == "MBEDTLS_MD_NONE":
return l
h = hash_ctx(alg_str)
msg_str = parts[msg_idx]
msg_hex = msg_str[1:-1]
msg = bytes.fromhex(msg_hex)
h.update(msg)
msg_hash = h.hexdigest()
msg_hash_str = '"' + msg_hash + '"'
parts[msg_idx] = msg_hash_str
return ":".join(parts) + '\n'
filename = 'tests/suites/test_suite_' + suite + '.data'
with open(filename) as f:
lines = f.readlines()
lines = [fix(l) for l in lines]
with open(filename, 'w') as f:
f.writelines(lines)
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
We had a message in the data file, and were computing its hash in the
test function. It is more efficient (and simpler when it comes to
dependencies) to directly have the message hash in the data file.
It was probably this way because some test vectors provide the message
for the sake of all-in-one implementation that hash-and-sign at once.
But our API gets a hash as the input and signs it. In unit tests, this
should be reflected in the signature of the test function, which should
take a hash as input.
The changes to the .data file were done using the following python
script:
import hashlib
suite = 'ecdsa'
functions = {
'ecdsa_det_test_vectors': (3, 4),
'ecdsa_write_restart': (3, 4),
}
def hash_ctx(s):
if s == 'MBEDTLS_MD_MD5':
return hashlib.md5()
if s == 'MBEDTLS_MD_SHA1':
return hashlib.sha1()
if s == 'MBEDTLS_MD_SHA224':
return hashlib.sha224()
if s == 'MBEDTLS_MD_SHA256':
return hashlib.sha256()
if s == 'MBEDTLS_MD_SHA384':
return hashlib.sha384()
if s == 'MBEDTLS_MD_SHA512':
return hashlib.sha512()
def fix(l):
parts = l.rstrip().split(":")
fun = parts[0]
if fun not in functions:
return l
(alg_idx, msg_idx) = functions[fun]
alg_str = parts[alg_idx]
if alg_str == "MBEDTLS_MD_NONE":
return l
h = hash_ctx(alg_str)
msg_str = parts[msg_idx][1:-1]
h.update(msg_str.encode('ascii'))
msg_hash = h.hexdigest()
msg_hash_str = '"' + msg_hash.upper() + '"'
parts[msg_idx] = msg_hash_str
return ":".join(parts) + '\n'
filename = 'tests/suites/test_suite_' + suite + '.data'
with open(filename) as f:
lines = f.readlines()
lines = [fix(l) for l in lines]
with open(filename, 'w') as f:
f.writelines(lines)
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This is mostly:
sed -i 's/mbedtls_psa_translate_md/mbedtls_hash_info_psa_from_md/' \
library/*.c tests/suites/*.function
This should be good for code size as the old inline function was used
from 10 translation units inside the library, so we have 10 copies at
least.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Using static inline functions is bad for code size; the function from
md_internal.h was already used from 3 different C files, so already was
copied at least 3 times in the library, and this would only get worse
over time.
Use actual functions, and also share the actual data between them.
Provide a consistent set of operations. Conversion to/from
human-readable string was omitted for now but could be added later if
needed.
In the future, this can be used to replace other similar (inline)
functions that are currently scattered, including (but perhaps not
limited to):
- mbedtls_psa_translate_md() from psa_util.h
- mbedtls_md_info_from_psa() (indirectly) from psa_crypto_hash.h
- get_md_alg_from_psa() from psa_crypto_rsa.c
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Same rationale as previous "Rm useless use of MD" commits.
Here the first two test functions were already not depending on MD_C,
but the new version is much simpler, as it avoids having two versions of
the code depending on the value of USE_PSA.
Changes to the data file generated with the following Python script:
import hashlib
suite = 'pk'
functions = {
'pk_rsa_verify_test_vec': (2, 1, True),
'pk_rsa_verify_ext_test_vec': (2, 1, True),
'pk_sign_verify_restart': (6, 7, False),
}
def hash_ctx(s):
if s == 'MBEDTLS_MD_MD5':
return hashlib.md5()
if s == 'MBEDTLS_MD_SHA1':
return hashlib.sha1()
if s == 'MBEDTLS_MD_SHA224':
return hashlib.sha224()
if s == 'MBEDTLS_MD_SHA256':
return hashlib.sha256()
if s == 'MBEDTLS_MD_SHA384':
return hashlib.sha384()
if s == 'MBEDTLS_MD_SHA512':
return hashlib.sha512()
if s == 'MBEDTLS_MD_RIPEMD160':
return hashlib.new("ripemd160")
def fix(l):
parts = l.rstrip().split(":")
fun = parts[0]
if fun not in functions:
return l
(alg_idx, msg_idx, is_hex) = functions[fun]
alg_str = parts[alg_idx]
if alg_str == "MBEDTLS_MD_NONE" or alg_str == "255":
return l
h = hash_ctx(alg_str)
msg_str = parts[msg_idx][1:-1]
msg = bytes.fromhex(msg_str) if is_hex else bytes(msg_str, 'ascii')
h.update(msg)
msg_hash = h.hexdigest()
msg_hash_str = '"' + msg_hash + '"'
parts[msg_idx] = msg_hash_str
return ":".join(parts) + '\n'
filename = 'tests/suites/test_suite_' + suite + '.data'
with open(filename) as f:
lines = f.readlines()
lines = [fix(l) for l in lines]
with open(filename, 'w') as f:
f.writelines(lines)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Tests are not here to demonstrate best practice, but to test a specific
part of the code. Using an RNG provided by the test framework also makes
the test code more focused on what we actually mean to test.
This brings the number of tests skipped in test_suite_rsa in
test_psa_crypto_config_accel_hash_use_psa down to 0 (from 50).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Probably the result of copy-pasting: the test functions actually don't
use those modules at all.
This brings the number of tests skipped in test_suite_rsa in
test_psa_crypto_config_accel_hash_use_psa down to 50 (from 61).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This brings the number of tests skipped in test_suite_rsa in
test_psa_crypto_config_accel_hash_use_psa down to 61 (from 117).
The changes to the test data file were generated with:
sed -i -f or_psa_hash.sed tests/suites/test_suite_rsa.data
with or_psa_hash.sed containing:
s/MBEDTLS_MD5_C/MBEDTLS_OR_PSA_WANT_ALG_MD5/g
s/MBEDTLS_RIPEMD160_C/MBEDTLS_OR_PSA_WANT_ALG_RIPEMD160/g
s/MBEDTLS_SHA1_C/MBEDTLS_OR_PSA_WANT_ALG_SHA_1/g
s/MBEDTLS_SHA224_C/MBEDTLS_OR_PSA_WANT_ALG_SHA_224/g
s/MBEDTLS_SHA256_C/MBEDTLS_OR_PSA_WANT_ALG_SHA_256/g
s/MBEDTLS_SHA384_C/MBEDTLS_OR_PSA_WANT_ALG_SHA_384/g
s/MBEDTLS_SHA512_C/MBEDTLS_OR_PSA_WANT_ALG_SHA_512/g
Here the MBEDTLS_OR_PSA_xxx macros are the right choice as we just need
data about the hashes to be available.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Same rationale as two commits ago.
Changes to the data file generated with the following script:
import hashlib
suite = 'rsa'
functions = {
'mbedtls_rsa_pkcs1_sign': (3, 1),
'mbedtls_rsa_pkcs1_verify': (3, 1),
}
def hash_ctx(s):
if s == 'MBEDTLS_MD_MD5':
return hashlib.md5()
if s == 'MBEDTLS_MD_SHA1':
return hashlib.sha1()
if s == 'MBEDTLS_MD_SHA224':
return hashlib.sha224()
if s == 'MBEDTLS_MD_SHA256':
return hashlib.sha256()
if s == 'MBEDTLS_MD_SHA384':
return hashlib.sha384()
if s == 'MBEDTLS_MD_SHA512':
return hashlib.sha512()
if s == 'MBEDTLS_MD_RIPEMD160':
return hashlib.new("ripemd160")
def fix(l):
parts = l.rstrip().split(":")
fun = parts[0]
if fun not in functions:
return l
(alg_idx, msg_idx) = functions[fun]
alg_str = parts[alg_idx]
if alg_str == "MBEDTLS_MD_NONE" or alg_str == "255":
return l
h = hash_ctx(alg_str)
msg_str = parts[msg_idx]
msg_hex = msg_str[1:-1]
msg = bytes.fromhex(msg_hex)
h.update(msg)
msg_hash = h.hexdigest()
msg_hash_str = '"' + msg_hash + '"'
parts[msg_idx] = msg_hash_str
return ":".join(parts) + '\n'
filename = 'tests/suites/test_suite_' + suite + '.data'
with open(filename) as f:
lines = f.readlines()
lines = [fix(l) for l in lines]
with open(filename, 'w') as f:
f.writelines(lines)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This brings the number of tests skipped in test_suite_pkcs1_v15 in
test_psa_crypto_config_accel_hash_use_psa to 0.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We had a message in the data file, and were computing its hash in the
test function. It is more efficient (and simpler when it comes to
dependencies) to directly have the message hash in the data file.
It was probably this way because some test vectors provide the message
for the sake of all-in-one implementation that hash-and-sign at once.
But our API gets a hash as the input and signs it. In unit tests, this
should be reflected in the signature of the test function, which should
take a hash as input.
The changes to the .data file were done using the following python
script:
import hashlib
suite = 'pkcs1_v15'
functions = {
'pkcs1_rsassa_v15_sign': (10, 12),
'pkcs1_rsassa_v15_verify': (6, 8),
}
def hash_ctx(s):
if s == 'MBEDTLS_MD_MD5':
return hashlib.md5()
if s == 'MBEDTLS_MD_SHA1':
return hashlib.sha1()
if s == 'MBEDTLS_MD_SHA224':
return hashlib.sha224()
if s == 'MBEDTLS_MD_SHA256':
return hashlib.sha256()
if s == 'MBEDTLS_MD_SHA384':
return hashlib.sha384()
if s == 'MBEDTLS_MD_SHA512':
return hashlib.sha512()
def fix(l):
parts = l.rstrip().split(":")
fun = parts[0]
if fun not in functions:
return l
(alg_idx, msg_idx) = functions[fun]
alg_str = parts[alg_idx]
if alg_str == "MBEDTLS_MD_NONE":
return l
h = hash_ctx(alg_str)
msg_str = parts[msg_idx]
msg_hex = msg_str[1:-1]
msg = bytes.fromhex(msg_hex)
h.update(msg)
msg_hash = h.hexdigest()
msg_hash_str = '"' + msg_hash + '"'
parts[msg_idx] = msg_hash_str
return ":".join(parts) + '\n'
filename = 'tests/suites/test_suite_' + suite + '.data'
with open(filename) as f:
lines = f.readlines()
lines = [fix(l) for l in lines]
with open(filename, 'w') as f:
f.writelines(lines)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The encrypt/decrypt cases don't depend on actually computing a hash,
just on information about it being available, and this information is
guarded by MBEDTLS_OR_PSA_WANT_xxx.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Having the whole .function file depend on SHA-1 was wrong: dependencies
in .function files are for compile-time dependencies all functions in
this file build just fine without SHA-1. It's just some tests cases that
do need SHA-1 at runtime, use dependencies on those specific tests in
the .data file then.
This reduces the number of cases skipped in this test suite in
test_psa_crypto_config_accel_hash_use_psa from 28 (all of them) down to
12 (those that actually use SHA-1 as opposed to no hash).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Applied:
sed -i -f use_psa_hash.sed tests/suites/test_suite_pk.*
with use_psa_hash.sed as follows:
s/MBEDTLS_MD5_C/MBEDTLS_USE_PSA_WANT_ALG_MD5/g
s/MBEDTLS_RIPEMD160_C/MBEDTLS_USE_PSA_WANT_ALG_RIPEMD160/g
s/MBEDTLS_SHA1_C/MBEDTLS_USE_PSA_WANT_ALG_SHA_1/g
s/MBEDTLS_SHA224_C/MBEDTLS_USE_PSA_WANT_ALG_SHA_224/g
s/MBEDTLS_SHA256_C/MBEDTLS_USE_PSA_WANT_ALG_SHA_256/g
s/MBEDTLS_SHA384_C/MBEDTLS_USE_PSA_WANT_ALG_SHA_384/g
s/MBEDTLS_SHA512_C/MBEDTLS_USE_PSA_WANT_ALG_SHA_512/g
With this commit, test_suite_pk achieves parity between:
- crypto_full minus PKCS#1v2.1
- same minus MD (from all.sh's test_crypto_full_no_md)
and between:
- default config plus use_psa minus PKCS#1v2.1
- same with accelerators (test_psa_crypto_config_accel_hash_use_psa)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
While at it, also fix buffer size for functions that already depend on
USE_PSA: it should be PSA_HASH_MAX_SIZE for functions that always use
PSA, and the new macro MBEDTLS_USE_PSA_MD_MAX_SIZE for functions that
use it or not depending on USE_PSA.
The only case where MBEDTLS_MD_MAX_SIZE is OK is when the function
always uses MD - currently this is the case with
pk_sign_verify_restart() as it is incompatible with USE_PSA anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
When MD is only used to compute a size, use md_internal.h instead.
When it's actually used to compute a hash, mark the test function as
depending on it. This is probably suboptimal in the long run, and we
might want to either adapt the code so that it can use PSA Crypto
instead, or just pre-compute the hash in the test data.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The parameters for init_handshake_options had changed on the development
branch after this test was created, so fixing up this test in order to
correct build failures after merge.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Force a bad session_id_len before handshake wrapup. This should
result in a forced jump to a clean up of a serialized session.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Use escape mechanism defined in RFC 1779 when parsing commas and other
special characters in X509 DN values. Resolves failures when generating
a certificate with a CSR containing a comma in subject value.
Fixes#769.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
In Certificate message parsing tests with
invalid vector lengths, add checks that the
parsing failed on the expected overread check.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In asn1_write tests, when there's a parsing function corresponding to the
write function, call it and check that it can parse what we wrote.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test with the output buffer size up to *and including* the expected output
size plus one. `... < expected->len + 1` was evidently a mistake.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_asn1_write_mpi() correctly handles the sign bit, so there's no
reason not to test that it's handled correctly.
Fix copypasta in test data that was commented out.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a null pointer dereference when performing some operations on zero
represented with 0 limbs: mbedtls_mpi_mod_int() dividing by 2, or
mbedtls_mpi_write_string() in base 2.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
That way the concerned tests are also run in the
TLS 1.3 only configuration where a TLS 1.3
handshake is performed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The endpoint initialization function was setting up
a certificate but the client certificate was not
used because client authentication was not enabled
(not enabled in the default SSL server configuration).
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Functions called within the test mean that MBEDTLS_X509_CRT_PARSE_C
is a test dependency and so is declared in this commit.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Move the definition of the accessor so that it is not defined
within the MBEDTLS_X509_CRT_WRITE_C guards. Thus remove the
dependency from the test and test cases.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Add two test cases for accessor test. One test where desired
ext type is presentent and the other of when the ext type is
not present.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Systematically replace "TEST_ASSERT( $x <= $y )" by "TEST_LE_U( $x, $y )" in
test_suite_psa_crypto. In this file, all occurrences of this pattern are
size_t so unsigned.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We want to check:
1. actual output <= PSA_RAW_KEY_AGREEMENT_OUTPUT_SIZE (the output fits
if the caller uses the key-specific buffer size macro)
2. actual output <= PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE (the output fits
if the caller uses the generic buffer size macro)
3. PSA_RAW_KEY_AGREEMENT_OUTPUT_SIZE <= PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE
(consistency in the calculation)
We were only testing (1) and (2). Test (3) as well. (1) and (3) together
imply (2) so there's no need to test (2).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remaining hits seem to be hex data, certificates,
and other miscellaneous exceptions.
List generated by running codespell -w -L
keypair,Keypair,KeyPair,keyPair,ciph,nd
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Removes a case in mbedtls_asn1_named_data() where memcpy() could be
called with a null pointer and zero length. A test case is added for
this code path, to catch the undefined behavior when running tests with
UBSan.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Adds two comments to clarify 1) why an offset is used
in the call to psa_aead_verify() and 2) why the test of
.hits_finish is always 0 in this test case.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
For multipart encrpytion, call psa_cipher_finish(). This is not actually
necessary for non-pathological implementations of ECB (the only currently
supported IV-less cipher algorithm) because it requires the input to be a
whole number of blocks and non-pathological implementations emit the output
block from update() as soon as an input block is available. But in principle
a driver could delay output and thus require a call to finish().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Validate the size macros directly from the output length in the test data,
rather than using the value returned by the library. This is equivalent
since the value returned by the library is checked to be identical.
Enforce that SIZE() <= MAX_SIZE(), in addition to length <= SIZE(). This is
stronger than the previous code which merely enforced length <= SIZE() and
length <= MAX_SIZE().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Motivated by CVE-2022-21449, to which we're not vulnerable, but we
didn't have a test for it. Now we do.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We test some configurations using drivers where the driver doesn't
support certain hash algorithms, but declares that it supports
compound algorithms that use those hashes. Until this is fixed,
in those configurations, don't try to actually perform operations.
The built-in implementation of asymmetric algorithms that use a
hash internally only dispatch to the internal md module, not to
PSA. Until this is supported, don't try to actually perform
operations when the operation is built-in and the hash isn't.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
remove use of MBEDTLS_SSL_MINOR_VERSION_*
remove use of MBEDTLS_SSL_MAJOR_VERSION_*
(only remaining use is in tests/suites/test_suite_ssl.data)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible, as the struct is now smaller.
Reduce size of mbedtls_ssl_ciphersuite_t
members are defined using integral types instead of enums in
order to pack structure and reduce memory usage by internal
ciphersuite_definitions[]
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible on little-endian platforms,
but is compatible on big-endian platforms. For systems supporting
only TLSv1.2, the underlying values are the same (=> 3).
New setter functions are more type-safe,
taking argument as enum mbedtls_ssl_protocol_version:
mbedtls_ssl_conf_max_tls_version()
mbedtls_ssl_conf_min_tls_version()
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version instead of minor version number in tls_version.
Note: struct member size changed from unsigned char to uint16_t
Due to standard structure padding, the structure size does not change
unless alignment is 1-byte (instead of 2-byte or more)
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is compatible on little-endian platforms,
but not compatible on big-endian platforms. The enum values for
the lower byte of MBEDTLS_SSL_VERSION_TLS1_2 and of
MBEDTLS_SSL_VERSION_TLS1_3 matches MBEDTLS_SSL_MINOR_VERSION_3 and
MBEDTLS_SSL_MINOR_VERSION_4, respectively.
Note: care has been taken to preserve serialized session format,
which uses only the lower byte of the TLS version.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Ensure that the nominal run works properly, so that it's apparent that the
injected failure is responsible for the failure of the handshake.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
USE_PSA_DONE() already checks that there are no used key slots.
The call to TEST_ASSERT() wouldn't have worked properly on failure anyway,
since it would jump back to the exit label.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The timing module might include time.h on its own when on
a suitable platform, even if MBEDTLS_HAVE_TIME is disabled.
Co-authored-by: Tom Cosgrove <tom.cosgrove@arm.com>
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Similar to the previous commit, this commit removes
the word 'multi-part' from the encrypt setup tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
After other changes had taken place the call to
PSA_ASSERT( psa_get_key_attributes( key, &attributes ) )
was no longer needed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
For weistrass curves the pair is encoded as 0x04 || x || y.
Flipping one of the bits in the first byte should be a sure failure.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Force a bitflip in server key to make the raw key
agreement fail, and then verify that no key slots
are left open at the end. Use a Weierstrass curve
to have a high chance of failure upon encountering
such bitflip.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
This commit alters an ASSERT_COMPARE statement
at the end of the aead_encrypt_setup test. This is to
correct a mistake introduced by the preceding PR.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit adds the required changes that arose from
the first round of reviewing. The total_input_data argument
has been removed and so the .data file needed to be edited
also.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Adds test data for the test case where the insufficient
memory error is forced on the driver status.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit adds test data for the case where the
algorithm is not supported by the driver but
the fallback option is available in the library.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Otherwise the error status can be PSA_ERROR_INVALID_SIGNATURE instead of the
expected PSA_ERROR_NOT_SUPPORTED in some configurations. For example, the
RSA verification code currently checks the signature size first whenever
PSA_KEY_TYPE_RSA_PUBLIC_KEY is enabled, and only gets into
algorithm-specific code if this passes, so it returns INVALID_SIGNATURE even
if the specific algorithm is not supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
They're redundant with the automatically generated test cases, but it's
useful to have them when debugging issues with the test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit adds tests data for the encrypt setup function
to cover the case where there is insufficent memory when
trying to undertake the operation.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit adds test data needed to test the case where driver
does not support selected algorithm but the library does.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit adds a test called aead_encrypt_setup()
which tests that the relevant drivers get called the correct
amount of times when running the multipart AEAD encrypt
setup API.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This implies that when both TLS 1.2 and TLS 1.3
are included in the build all the TLS 1.2 tests
using the default configuration now go through
a version negotiation on the client side.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
To be compatible with the other functions `mbedtls_psa_hkdf_extract` and
`mbedtls_psa_hkdf_expand` use hash algorithm for parameter.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
- parameter name in function description
- test_suite_ecp.data: add new line at the end of file
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
The test suite test_suite_psa_crypto_op_fail now runs a large number
of automatically generated test cases which attempt to perform a
one-shot operation or to set up a multi-part operation with invalid
parameters. The following cases are fully covered (based on the
enumeration of valid algorithms and key types):
* An algorithm is not supported.
* The key type is not compatible with the algorithm (for operations
that use a key).
* The algorithm is not compatible for the operation.
Some test functions allow the library to return PSA_ERROR_NOT_SUPPORTED
where the test code generator expects PSA_ERROR_INVALID_ARGUMENT or vice
versa. This may be refined in the future.
Some corner cases with algorithms combining a key agreement with a key
derivation are not handled properly. This will be fixed in follow-up
commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test that hash operation functions fail when given a hash algorithm
that is not supported or an algorithm that is not a hash.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The new test suite psa_crypto_op_fail is intended for systematically
generated test cases that ensure that cryptographic operations with
invalid parameters fail as expected. I intend invalid parameters to
cover things like an invalid algorithm, an algorithm that is
incompatible with the operation, a key type that is incompatible with
the algorithm, etc.
This commit just creates the infrastructure. Subsequent commits will
add data generation and test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
CCM*-no-tag is currently available whenever CCM is, so declare
PSA_WANT_ALG_CCM_STAR_NO_TAG whenever PSA_WANT_ALG_CCM is declared and vice
versa.
Fix dependencies of test cases that use PSA_ALG_CCM_STAR_NO_TAG: some were
using PSA_WANT_ALG_CCM and some had altogether wrong dependencies.
This commit does not touch library code. There is still no provision for
providing CCM support without CCM*-no-tag or vice versa.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The PSA Crypto API uses 0 as the initial counter value, but the test vector
in RFC 7539 uses 1. So the unit tests here include an extra leading block.
The expected data for this leading block was calculated with Cryptodome.
#!/usr/bin/env python3
import re
from Cryptodome.Cipher import ChaCha20
key = bytes.fromhex('000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f')
nonce = bytes.fromhex('000000000000004a00000000')
encrypt = lambda pt: ChaCha20.new(key=key, nonce=nonce).encrypt(pt)
# Cryptodome uses counter=0, like PSA Crypto. Prepend a 64-byte input block #0
# so that the plaintext from RFC 7539 starts exactly at block #1.
header = b'The RFC 7539 test vector uses counter=1, but PSA uses counter=0.'
assert(len(header) == 64)
sunscreen = b"Ladies and Gentlemen of the class of '99: If I could offer you only one tip for the future, sunscreen would be it."
plaintext = header + sunscreen
zeros = b'\x00' * len(plaintext)
keystream = encrypt(zeros)
ciphertext = encrypt(plaintext)
print('RFC 7539 §2.4.2')
print('Keystream:')
print(re.sub(r'(..)', r'\1:', keystream[64:].hex()))
print('Ciphertext Subscreen:')
print(re.sub(r'(..)', r'\1 ', ciphertext[64:].hex()))
print('')
print(f"""\
PSA symmetric decrypt: ChaCha20, RFC7539 keystream
depends_on:PSA_WANT_ALG_STREAM_CIPHER:PSA_WANT_KEY_TYPE_CHACHA20
# Keystream from RFC 7539 §2.4.2, with an extra 64-byte output block prepended
# because the test vector starts at counter=1 but our API starts at counter=0.
cipher_decrypt:PSA_ALG_STREAM_CIPHER:PSA_KEY_TYPE_CHACHA20:"{key.hex()}":"{nonce.hex()}":"{zeros.hex()}":"{keystream.hex()}"
PSA symmetric decrypt: ChaCha20, RFC7539 sunscreen
depends_on:PSA_WANT_ALG_STREAM_CIPHER:PSA_WANT_KEY_TYPE_CHACHA20
# Test vector from RFC 7539 §2.4.2, with an extra 64-byte block prepended
# because the test vector starts at counter=1 but our API starts at counter=0.
cipher_decrypt:PSA_ALG_STREAM_CIPHER:PSA_KEY_TYPE_CHACHA20:"{key.hex()}":"{nonce.hex()}":"{ciphertext.hex()}":"{plaintext.hex()}"
""")
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* Remove expected_output_data: since asymmetric encryption is randomized,
it can't be useful.
* The decryption check needs the private exponent, not the public exponent.
* Use PSA macro for the expected ciphertext buffer size.
* Move RSA sanity checks to their own function for clarity.
* For RSAES-PKCS1-v1_5, check that the result of the private key operation
has the form 0x00 0x02 ... 0x00 M where M is the plaintext.
* For OAEP, check that the result of the private key operation starts with
0x00. The rest is the result of masking which it would be possible to
check here, but not worth the trouble of implementing.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add a call to `mbedtls_md_starts()` in the `mbedtls_md_process()`
test, as it violates the API usage. Fixes#2227.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
The X509write x509_csr_check reference file depends on
mbedtls_test_rnd_pseudo_rand being used to match the pre-generated data.
This calls x509_crt_verifycsr() like in x509_csr_check_opaque() when
MBEDTLS_USE_PSA_CRYPTO is defined.
Notably using PSA_ALG_DETERMINISTIC_ECDSA() in ecdsa_sign_wrap() makes
this test run without these changes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The pk_rsa_encrypt_test_vec() reference vector is calculated while using
mbedtls_test_rnd_pseudo_rand rng source, but since the RNG souce can't
be controlled when USE_PSA_CRYPTO is enabled we can't get the same
result.
The pk_rsa_encrypt_test_vec() fails when switching to mbedtls_test_rnd_std_rand
as rng source.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The test is based on the AEAD multi-part test, re-using the
design on aead_multipart_internal_func() to test differnet
sequence of psa_mac_update() for MAC update or verify.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Extend mbedtls_ssl_set_hs_own_cert() to reset handshake cert list
if cert provided is null. Previously, mbedtls_ssl_set_hs_own_cert()
only provided a way to append to the handshake certificate list,
without providing a way to replace the handshake certificate list.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
