Multipart decrypt now always expects positive result (i.e. the plaintext
that is passed in). Added new test that expects fail, and does no
multipart versions and concentrates on aead_verify.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Previous tests only tested when the expected lengths were set to zero.
New test sends all data/ad then goes over by one byte.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
i.e Check correct buffer size +1 and correct buffer size -1 (where
applicable) to check too big and too small cases, and hopefully catch
edge cases.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Ensure that the test actually does something, rather than skipping both
parts, also add comment to this effect.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fix opaque key test vector dependency to PSA_CRYPTO_DRIVER_TEST
instead of MBEDTLS_PSA_CRYPTO_DRIVERS while validating with
test drivers.
Signed-off-by: Archana <archana.madhavan@silabs.com>
A minimal test driver extension is added to support
copy of opaque keys within the same location.
Test vector support is extended to cover opaque keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
-Add test driver support to import/export while wrapping keys
meant to be stored in the PSA core as opaque( emulating an
SE without storage ).
-Export validate_unstructured_key_bit_size as
psa_validate_unstructured_key_bit_size, thereby changing its scope.
-Improve the import/export test cases in test_suite_psa_crypto to also
cover opaque keys, thereby avoiding duplication.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Add tests for passing incomplete input data in
the first call and too much data in the second call.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
We previously had tests for not sending enough (additional) data, but
were missing tests for sending too much. I have added these to the state
tests, as I don't think this is complex enough to deserve a standalone
test.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Most supported ciphers have a 128-bit, 192-bit or 256-bit keys. List the
exceptions explicitly.
This commit fixes a test failure with the null cipher and an incorrect
comment that omitted several key lengths.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add functions to read the type, mode, name and key_bitlen fields from
mbedtls_cipher_info_t. These are the fields that applications are most
likely to care about.
TLS code also uses iv_size and block_size, which it might make sense to
expose, but most applications shouldn't need those, so I'm not exposing them
for now.
Call the new functions in unit tests, so they're at least smoke-tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
library/ccm.c
Conflict resolved by re-applying the MBEDTLS_BYTE_0 macro.
Conflict resolved by ignoring the MBEDTLS_PUT_UINT16_BE macro
used in development branch on the 'b' buffer, because the 'b'
buffer is removed in current branch.
The psa_open_key API depends on MBEDTLS_PSA_CRYPTO_STORAGE_C.
This is unnecessary for builtin keys and so is fixed.
Updated an open_fail test vector keeping with the same.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Add the missing nonce length checks (this function is being used by
oneshot functions as well as multipart, and thus all cipher suites are
being used) and cover the case where a NULL buffer gets passed in.
Extended the set nonce test to cover this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Cover:
- not calling auth data update
- not calling cipher text update
- exceeding configured auth data length
- exceeding configured cipher text length
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Before `mbedtls_ssl_setup`, config functions should
be called. Without it, `mbedtls_ssl_setup` will raise
invalid value error.
Change-Id: I46fdaa5e8eb83d06c620087a9e1e7e14e1c5d9b5
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Still check that encryption and decryption are inverse to each other
if the granularity does not match the one used in the KAT.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds four known answer tests for TLS 1.3 record protection
from the following sources:
- RFC 8448 "Example Handshake Traces for TLS 1.3"
- tls13.ulfheim.net "The New Illustrated TLS Connection"
It extends the test coverage of the existing record protection tests
in the following ways:
- The existing record protection tests hand-craft record transform
structures; the new tests use the function
mbedtls_ssl_tls13_populate_transform()
from library source to create an TLS 1.3 transform from raw
key material and connection information.
- The existing record protection tests only check that encryption
and decryption are inverse to each other; as such, they don't
catch non-compliant implementations of encryption and decryption
which happen to be inverse to each other. By adding a known answer
test for TLS 1.3 record protection, can gain confidence that our
implementation is indeed standards-compliant.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Instances of `mbedtls_ssl_session` represent data enabling session resumption.
With the introduction of TLS 1.3, the format of this data changes. We therefore
need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish
1.2 and 1.3 sessions.
This commit introduces such a TLS-version field to mbedtls_ssl_session.
The change has a few ramifications:
- Session serialization/deserialization routines need to be adjusted.
This is achieved by adding the TLS-version after the header of
Mbed TLS version+config, and by having the subsequent structure
of the serialized data depend on the value of this field.
The details are described in terms of the RFC 8446 presentation language.
The 1.2 session (de)serialization are moved into static helper functions,
while the top-level session (de)serialization only parses the Mbed TLS
version+config header and the TLS-version field, and dispatches according
to the found version.
This way, it will be easy to add support for TLS 1.3 sessions in the future.
- Tests for session serialization need to be adjusted
- Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3,
we will need to have some logic comparing the TLS version of the proposed session
to the negotiated TLS version. For now, however, we only support TLS 1.2,
and no such logic is needed. Instead, we just store the TLS version in the
session structure at the same point when we populate mbedtls_ssl_context.minor_ver.
The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and
`mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved.
However, with both fields being private and explicitly marked so, this can happen
in a later change.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Previous test in state test was not actually making sure that the
operatioon could be completed using set lengths / set nonce in either
order, thus changed the 'normal' encrypt / decrypt tests to run in
alternating order.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Make all encrypt/decrypt tests use the same function. Cleanup arguments
that were poorly named and document internal function. Removed one test
as I didn't want to write another test purely for it, when its already
tested in one shot.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Previously the check was convoluted. This has been simplified
and given a more appropriate suggestion as per gilles suggestion
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Call the output size macros specifically with asymmetric keys, which
would cause a crash (and thus test fail) should this fix get regressed.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
This file had temporary MBEDTLS_xxx dependencies because it was created when
support for PSA_WANT_xxx was still incomplete. Switch to the PSA_WANT_xxx
dependencies
This fixes the bug that "PSA storage read: AES-GCM+CTR" was never executed
because there was a typo in a dependency.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* Add tests to validate MSB not ok for Curve25519 and
Curve448.
* Add a test to generate key for for Curve448.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Enable Curve448 support
Add test vectors to evaluate
* RFC 7748
* a known-answer public key export test.
* a known-answer ECDH (X448) test.
Signed-off-by: Archana <archana.madhavan@silabs.com>
mbedtls_ecp_read_key and mbedtls_ecp_write_key are updated to include
support for Curve448 as prescribed by RFC 7748 §5.
Test suites have been updated to validate curve448 under Montgomery
curves.
Signed-off-by: Archana <archana.madhavan@silabs.com>
add space between bracket and a newline that had occured
through changes but do not match the original file style
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The power 2 check now uses a looping bit shift to try match
with the block sizes and will escape the loop when appropriate
The test cases, as pointed out by Gilles, could be harmful in
the future and testing a test case is not generally necessary
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
tests/scripts/check_test_cases.py located duplicate descriptions
for the negative tests checking that the check fails when a block
size is not a power of 2
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Add a check to ensure the block_size is or is not a power of 2
Add a new parameter to verify the expected pass/fail when a block_size
is or is not a power of 2.
Add new sets of input data to verify these tests
Fixes#4228
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Modify tests to test mbedtls_psa_cipher_operation_t,
mbedtls_transparent_test_driver_cipher_operation_t and
mbedtls_opaque_test_driver_cipher_operation_t struct initialization macros.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Tests for psa_cipher_encrypt and psa_cipher_decrypt functions.
The psa_cipher_encrypt function takes no parameter for IV and always generates
it therefore there will be a randomness in the calculation and cannot be
validated by comparing the actual output with the expected output.
The function is tested by:
- doing a prtially randomized test with an encryption then a decryption
and validating the input with output of the decryption
- validating against the multipart encryption
The combination of this two methods provides enough coverage like a
known answer test.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Also remove preprocessor logic for MBEDTLS_CONFIG_FILE, since
build_info.h alreadyy handles it.
This commit was generated using the following script:
# ========================
#!/bin/sh
git ls-files | grep -v '^include/mbedtls/build_info\.h$' | xargs sed -b -E -i '
/^#if !?defined\(MBEDTLS_CONFIG_FILE\)/i#include "mbedtls/build_info.h"
//,/^#endif/d
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Negative x coordinate was tested with the value -1. It happens to be one
of the low order points both for Curve25519 and Curve448 and might be
rejected because of that and not because it is negative. Make sure that
x < 0 is the only plausible reason for the point to be rejected.
Signed-off-by: Janos Follath <janos.follath@arm.com>
A test was added in that could cause a jump to exit prior to
initialisation of a pointer that would get freed if that test failed.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
The functions mbedtls_pk_sign(), mbedtls_pk_sign_restartable(),
mbedtls_ecdsa_write_signature() and mbedtls_ecdsa_write_signature_restartable()
now take an extra parameter indicating the size of the output buffer for the
signature.
No change to RSA because for RSA, the output size is trivial to calculate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A test case for which the loop would take practically forever if it was
reached. The point would be to validate that the loop is not reached.
The test case should cause the CI to time out if starting with the
current code, ecp_check_pubkey_mx() was changed to call
ecp_check_pubkey_x25519() first and run the mbedtls_mpi_size(() test
afterwards, which would make no semantic difference in terms of memory
contents when the function returns, but would open the way for a DoS.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Various functions for PSA hash operations call abort
on failure; test that this is done. The PSA spec does not require
this behaviour, but it makes our implementation more robust in
case the user does not abort the operation as required by the
PSA spec.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Without this parameter, it would be hard for callers to know how many bytes
of output the function wrote into the output buffer. It would be possible,
since the cumulated output must have the same length as the cumulated input,
but it would be cumbersome for the caller to keep track.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Various functions for PSA cipher and mac operations call abort
on failure; test that this is done. The PSA spec does not require
this behaviour, but it makes our implementation more robust in
case the user does not abort the operation as required by the
PSA spec.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
New functions are used to cover corner cases:
* authentication data is fed to gcm with 0, 1 or 2 calls to gcm_update
* ciphertext is fed to gcm with 0, 1 or 2 calls to gcm_update_ad
AES-GCM NIST test vectors downloaded at 16.06.2021 from:
csrc.nist.gov/groups/STM/cavp/documents/mac/gcmtestvectors.zip
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The cipher_bad_order test happened to pass, but was not testing the
failure case it intended to test.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
PSA_KEY_LIFETIME_FROM_PERSISTENCE_AND_LOCATION shifts the location
value (location << 8). This can go outside the range of a 32-bit int
if the location value is above 2^23 as is the case here. Asan
rightfully complained about it. Make the value unsigned to avoid the
integer overflow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test keys with various persistence levels, enumerated from the
metadata tests.
For read-only keys, do not attempt to create or destroy the key
through the API, only to read a key that has been injected into
storage directly through filesystem access.
Do not test keys with a non-default location, since they require a
driver and we do not yet have a dependency mechanism to require the
presence of a driver for a specific location value.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Attempting to create a key with an invalid location or with read-only
persistence must be rejected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources
(RFC 7748 say we MAY reject 0 as a result) and recommended by some to
reject those points (either to ensure contributory behaviour, or to
protect against timing attack when the underlying field arithmetic is
not constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Ensure finish only called when encrypting and verify only called for
decrypting, and add tests to ensure this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Where hashlen was previously ignored when the hash length could be
inferred from an md_alg parameter, the two must now match.
Adapt the existing tests accordingly. Adapt the sample programs accordingly.
This commit does not add any negative testing.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a bug introduced in "Fix multiplication producing a negative zero" that
caused the sign to be forced to +1 when A > 0, B < 0 and B's low-order limb
is 0.
Add a non-regression test. More generally, systematically test combinations
of leading zeros, trailing zeros and signs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
No need to bypass the API to fill limbs. It's a better test to just
set the top bit that we want to have set, and it's one less bypass of
the API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In mbedtls_mpi_read_string, if the string is empty, return an empty bignum
rather than a bignum with one limb with the value 0.
Both representations are correct, so this is not, in principle, a
user-visible change. The change does leak however through
mbedtls_mpi_write_string in base 16 (but not in other bases), as it writes a
bignum with 0 limbs as "" but a bignum with the value 0 and at least one
limb as "00".
This change makes it possible to construct an empty bignum through
mbedtls_mpi_read_string, which is especially useful to construct test
cases (a common use of mbedtls_mpi_read_string, as most formats use in
production encode numbers in binary, to be read with mbedtls_mpi_read_binary
or mbedtls_mpi_read_binary_le).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix mbedtls_mpi_mul_mpi() when one of the operands is zero and the
other is negative. The sign of the result must be 1, since some
library functions do not treat {-1, 0, NULL} or {-1, n, {0}} as
representing the value 0.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a null pointer dereference in mbedtls_mpi_exp_mod(X, A, N, E, _RR) when
A is the value 0 represented with 0 limbs.
Make the code a little more robust against similar bugs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test both 0 represented with 0 limbs ("0 (null)") and 0 represented
with 1 limb ("0 (1 limb)"), because occasionally there are bugs with
0-limb bignums and occasionally there are bugs with removing leading
zero limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_exp_mod can be called in three ways regarding the speed-up
parameter _RR: null (unused), zero (will be updated), nonzero (will be
used). Systematically test all three.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the RR parameter to the mbedtls_mpi_exp_mod test function.
It was never used in the test data, so there is no loss of functionality.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test mbedtls_mpi_safe_cond_assign() and mbedtls_mpi_safe_cond_swap()
with their "unsafe" counterparts mbedtls_mpi_copy() and
mbedtls_mpi_swap(). This way we don't need to repeat the coverage of
test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Similarly to "Overhaul testing of mbedtls_mpi_copy", simplify the code
to test mbedtls_mpi_swap to have just one function for distinct MPIs
and one function for swapping an MPI with itself, covering all cases
of size (0, 1, >1) and sign (>0, <0).
The test cases are exactly the same as for mbedtls_mpi_copy with the
following replacements:
* `Copy` -> `Swap`
* ` to ` -> ` with `
* `_copy` -> `_swap`
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace the two test functions mbedtls_mpi_copy_sint (supporting signed
inputs but always with exactly one limb) and mbedtls_mpi_copy_binary
(supporting arbitrary-sized inputs but not negative inputs) by a single
function that supports both arbitrary-sized inputs and arbitrary-signed
inputs. This will allows testing combinations like negative source and
zero-sized destination.
Also generalize mpi_copy_self to support arbitrary inputs.
Generate a new list of test cases systematically enumerating all
possibilities among various categories: zero with 0 or 1 limb, negative or
positive with 1 limb, negative or positive with >1 limb. I used the
following Perl script:
```
sub rhs { $_ = $_[0]; s/bead/beef/; s/ca5cadedb01dfaceacc01ade/face1e55ca11ab1ecab005e5/; $_ }
%v = (
"zero (null)" => "",
"zero (1 limb)" => "0",
"small positive" => "bead",
"large positive" => "ca5cadedb01dfaceacc01ade",
"small negative" => "-bead",
"large negative" => "-ca5cadedb01dfaceacc01ade",
);
foreach $s (sort keys %v) {
foreach $d (sort keys %v) {
printf "Copy %s to %s\nmbedtls_mpi_copy:\"%s\":\"%s\"\n\n",
$s, $d, $v{$s}, rhs($v{$d});
}
}
foreach $s (sort keys %v) {
printf "Copy self: %s\nmpi_copy_self:\"%s\"\n\n", $s, $v{$s};
}
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is mostly to look for cases where the sign bit may have been left at 0
after zerozing memory, or a value of 0 with the sign bit set to -11. Both of
these mostly work fine, so they can go otherwise undetected by unit tests,
but they can break when certain combinations of functions are used.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace calls to mbedtls_mpi_read_string() with a wrapper
mbedtls_test_read_mpi() when reading test data except for the purpose
of testing mbedtls_mpi_read_string() itself. The wrapper lets the test
data control precisely how many limbs the constructed MPI has.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The psa_verify_hash() is the pre-hashed version of the API and supposed
to work on hashes generated by the user. There were tests passing that
were getting "hashes" of sizes different from the expected.
Transform these into properly failing tests.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Tests for psa_mac_compute and psa_mac_verify functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reverting some deleted tests and changing the deprecated algo
Deleting deprecated headers from /alt-dummy dir
Corrections to the comments
Removal of deleted functions from compat-2.x.h
Corrections to tests/data_files/Makefile
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
There was already a test case for 0 but with a non-empty representation
(X->n == 1). Add a test case with X->n == 0 (freshly initialized mpi).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
in file tests/suite/test_suite_aes.function, aes_crypt_xts_size()
did not free the context upon the function exit.
The function now frees the context on exit.
Fixes#4176
Signed-off-by: JoeSubbiani <Joe.Subbiani@arm.com>
This is necessary for the case where the public part of an EC keypair
needs to be computed from the private part - either because it was not
included (it's an optional component) or because it was compressed (a
format we can't parse).
This changes the API of two public functions: mbedtls_pk_parse_key() and
mbedtls_pk_parse_keyfile().
Tests and programs have been adapted. Some programs use a non-secure RNG
(from the test library) just to get things to compile and run; in a
future commit this should be improved in order to demonstrate best
practice.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- mbedtls_ecp_check_pub_priv() because it calls ecp_mul()
- mbedtls_pk_check_pair() because it calls the former
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Fix trivial faulty calls in ECP test suite and ECP/ECJPAKE self-tests (by
adding a dummy RNG).
Several tests suites are not passing yet, as a couple of library
function do call ecp_mul() with a NULL RNG. The complexity of the fixes
range from "simple refactoring" to "requires API changes", so these will
be addressed in separate commits.
This makes the option MBEDTLS_ECP_NO_INTERNAL_RNG, as well as the whole
"internal RNG" code, obsolete. This will be addressed in a future
commit, after getting the test suites to pass again.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
mbedtls_dhm_get_value can be seen as either a copy function or a getter
function. Given the name and the semantics, it's more of a getter, even if
it "gets" by doing a copy. Therefore, put the context first, and the
selector next, leaving the output for last.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add two functions mbedtls_dhm_get_len() and mbedtls_dhm_get_bitlen() to
query the length of the modulus in bytes or bits.
Remove the len field: the cost of calling mbedtls_dhm_get_len() each time
it's needed is negligible, and this improves the abstraction of the DHM
module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
include/mbedtls/ssl.h
include/psa/crypto_struct.h
Conflicts fixed by using the code from development branch
and manually re-applying the MBEDTLS_PRIVATE wrapping.
Remove padding parameters as mbedtls_rsa_init()
cannot return an error code when padding
parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
mbedtls_rsa_set_padding() now returns the error
code MBEDTLS_ERR_RSA_INVALID_PADDING when
padding parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Do more iterations with small values. This makes it more likely that a
mistake on bounds will be detected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Slightly simplify is_significantly_above_a_power_of_2() to make it
easier to understand:
* Remove the explicit negative answer for x <= 4. The only functional
difference this makes is that is_significantly_above_a_power_of_2(3)
is now true.
* Shift the most significant bit of x to position 8 rather than 15.
This makes the final comparison easier to explain.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for mbedtls_mpi_fill_random() and mbedtls_mpi_random()
when the resulting MPI object previously had a nonzero value. I wrote
those to catch a bug that I introduced during the development of
mbedtls_mpi_random() (but does not appear in a committed version).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_random() uses mbedtls_mpi_cmp_mpi_ct(), which requires its
two arguments to have the same storage size. This was not the case
when the upper bound passed to mbedtls_mpi_random() had leading zero
limbs.
Fix this by forcing the result MPI to the desired size. Since this is
not what mbedtls_mpi_fill_random() does, don't call it from
mbedtls_mpi_random(), but instead call a new auxiliary function.
Add tests to cover this and other conditions with varying sizes for
the two arguments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of generating blinding values and keys in a not-quite-uniform way
(https://github.com/ARMmbed/mbedtls/issues/4245) with copy-pasted code,
use mbedtls_mpi_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_dhm_make_params() with x_size != size of P is not likely to be
useful, but it's supported, so test it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Repeat a few tests that use random data. This way the code is
exercised with a few different random values.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Improve the validation of the output from mbedtls_dhm_make_params:
* Test that the output in the byte buffer matches the value in the
context structure.
* Test that the calculated values are in the desired range.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since mbedtls_mpi_random() is not specific to ECC code, move it from
the ECP module to the bignum module.
This increases the code size in builds without short Weierstrass
curves (including builds without ECC at all) that do not optimize out
unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename mbedtls_ecp_gen_privkey_sw to mbedtls_mpi_random since it has
no particular connection to elliptic curves beyond the fact that its
operation is defined by the deterministic ECDSA specification. This is
a generic function that generates a random MPI between 1 inclusive and
N exclusive.
Slightly generalize the function to accept a different lower bound,
which adds a negligible amount of complexity.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for private key generation on short Weierstrass curves.
These tests validate that the result is within the desired range.
Additionally, they validate that after performing many iterations, the
range is covered to an acceptable extent: for tiny ranges, all values
must be reached; for larger ranges, all value bits must reach both 0
and 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't calculate the bit-size of the initially generated random number.
This is not necessary to reach the desired distribution of private
keys, and creates a (tiny) side channel opportunity.
This changes the way the result is derived from the random number, but
does not affect the resulting distribution.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The library rejected an RNG input of all-bits-zero, which led to the
key 2^{254} (for Curve25519) having a 31/32 chance of being generated
compared to other keys. This had no practical impact because the
probability of non-compliance was 2^{-256}, but needlessly
complicated the code.
The exception was added in 98e28a74e3 to
avoid the case where b - 1 wraps because b is 0. Instead, change the
comparison code to avoid calculating b - 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test the exact output from known RNG input. This is overly
constraining, but ensures that the code has good properties.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If a fallback is not explicitly configured in the
mbedtls_test_rnd_buf_info structure, fail after the buffer is
exhausted.
There is no intended behavior change in this commit: all existing uses
of mbedtls_test_rnd_buffer_rand() have been updated to set
mbedtls_test_rnd_std_rand as the fallback.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove tests related to NULL pointers,
keep tests related to invalid enum values.
Remove test code related to MBEDTLS_CHECK_PARAMS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
Add HKDF tests where the sequence of inputs differs from the nominal
case: missing step, duplicate step, step out of order, or invalid step.
There were already similar tests for TLS 1.2 PRF. Add one with a key
agreement which has slightly different code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`mbedtls_test_hook_error_add` is referenced inside main_test.function.
Including the `error.h` is necessary to build suites which define both
MBEDTLS_TEST_HOOKS and MBEDTLS_ERROR_C, such as:
build_psa_accel_alg_ecdh
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Public structs members are considered private and should not
be used by users application.
MBEDTLS_PRIVATE(member) macro is intended to clearly indicate
which members are private.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The test "PSA generate key: RSA, 1024 bits, good, encrypt (OAEP
SHA-256)" had a dependency on MBEDTLS_GENPRIME, but this was not listed
in the dependencies. Add MBEDTLS_GENPRIME to the test's dependencies to
ensure it has what it needs to run.
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Conflicts:
library/version_features.c
programs/test/query_config.c
Files were removed in development branch and modified by current branch.
Conflicts fixes by removing them.
CI was failing on check_params due to
MBEDTLS_RSA_PRIVATE being assigned to a now
superfluous variable. The variable has been
as well as another superfluous variable.
This should correct the CI issue.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter
from the mbedtls_rsa_rsassa_pss_verify_ext
function. This change is propagated
throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the f_rng parameter from
the mbedtls_rsa_rsassa_pss_verify_ext
function. This is in preparation for
the removal of the mode parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng parameter from the
mbedtls_rsa_rsassa_pss_verify_ext function
in preparation for removal of the mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter
from the mbedtls_rsa_rsassa_pss_verify
function and propagates the change
throughout the process.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes f_rng parameter from
mbedtls_rsa_rsassa_pss_verify function in
preparation of mode parameter removal.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng parameter from
mbedtls_rsa_rsassa_pss_verify function
as preparation for removing the mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes mode parameter from
mbedtls_rsa_rsassa_pkcs1_v15_verify and
propagates the change throughout the
codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit performs removal of f_rng parameter
from mbedtls_rsa_rsassa_pkcs1_v15_verify
function in preparation for removal of mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng from
mbedtls_rsa_rsassa_pkcs1_v15_verify function in
preparation of removal of mode parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Conflicts:
* configs/config-psa-crypto.h: modified here, removed in development
* tests/suites/test_suite_x509parse.data: all conflicts are in depends_on
lines where development made a change unrelated to MBEDTLS_SHAxxx and our
branch either changed `MBEDTLS_SHA256_C` to `MBEDTLS_SHA224_C` or
`MBEDTLS_SHA512_C:!MBEDTLS_SHA512_NO_SHA384` to ``MBEDTLS_SHA384_C`, with
no change to what the test does. Pick the other branch's dependency
changes then apply our SHA dpeendency change.
Commit removes mode parameter from
mbedtls_rsa_pkcs1_verify and propagates the
change throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng from mbedtls_rsa_pkcs1_verify
since p_rng has no relevance following the removal
of f_rng from this function.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes f_rng parameter from
mbedtls_rsa_pkcs1_verify as a prerequisite
to removing the mode parameter. f_rng no
longer has relevance in this function if
mode is removed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Relevant tests have been modified and
in some cases removed in preparation for
removal of mode parameter from verify
functions.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode param from
mbedtls_rsa_rsassa_pss_sign and propagates
the changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter from
mbedtls_rsa_rsassa_pkcs1_v15_sign and
propagates the change throughout the
codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter from
mbedtls_rsa_pkcs1_sign and progagates the
change to all relevant parts of the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Tests for mbedtls_rsa_rsassa_pss_sign in
test_suite_rsa.function have been modified to
allow for upcoming removal of mode param.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Fix a pointer mismatch when int32_t is not int, for example on Cortex-M where
in32_t is long int. Fix#4530
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit modifies the typedef of
mbedtls_pk_rsa_alt_sign_func and propagates the
associated changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Modification of tests in test_suite_rsa.function
to adept them for the removal of the mode param from
mbedtls_rsa_pkcs1_sign function.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removes mode parameter from
mbedtls_rsa_rsaes_oaep_encrypt and propagates
changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removal of mode parameter from
mbedtls_rsa_rsaes_pkcs1_v15_encrypt. This commit
propagates the change to all relevant function calls
and tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removal of the mode parameter from
mbedtls_rsa_pkcs1_encrypt function. This change
is propagated throughout the codebase and to
relevant tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Changes for tests involving mbedtls_rsa_pkcs1_encrypt.
Removal of test in test_suite_rsa.function where
invalid mode is used. Also modification of other tests
to use the constant MBEDTLS_RSA_PUBLIC instead
of the mode variable.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Add (internal only) define to config.h which allows the temporary
implementation of CCM to work, by removing the buffer zeroization on tag
fail when decrypting. This will obviously be removed when multipart CCM
is properaly implemented
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
All tests should have an abort call in case of test failure to make sure
everything is cleaned up. Also removed unused define.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Some tests cause a zero length input or output, which can mean the
allocated test output buffers can be zero length. Protect against
calling memcpy blindly in these situations.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Update the mbedtls_test_psa_exercise_key to handle and use
PSA_KEY_USAGE_SIGN_MESSAGE and PSA_KEY_USAGE_VERIFY_MESSAGE key policies.
Add new tests for PSA_KEY_USAGE_SIGN_MESSAGE and PSA_KEY_USAGE_VERIFY_MESSAGE
policies.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Modify function and test case names that testing psa_sign_hash and
psa_verify_hash funtions to be less confusing with the newly introduced
function and test case names which tests psa_sign_message and
psa_verify_message functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
The reference output data was created with cryptodome for RSA algorithms and
python-ecdsa for ECDSA algorithms.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Modify function and test case names that testing psa_sign_hash and
psa_verify_hash funtions to be less confusing with the newly introduced
function and test case names which tests psa_sign_message and
psa_verify_message functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Remove mode param from mbedtls_rsa_rsaes_pkcs1_v15_decrypt
and also modify and remove relevant tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removing the mode parameter from the mbedtls_rsa_rsaes_oaep_decrypt
function. The change is progagated to all function calls, including in
test suite .function files. Additionally fully removing one test
where the wrong mode was being tested.
Signed-off-by: Tom Daubney <Thomas.Daubney@arm.com>
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
The mode parameter has been removed from the
mbedtls_rsa_pkcs1_decrypt function. The change
has been progagated to all function calls,
including in test suite .function files.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removed a conditional compilation block
relating to MBEDTLS_PKCS1_V15 in
rsa_pkcs1_verify_raw function that was no
longer relevant.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Building the library without entropy sources negates any and all security
provided by the library.
This option was originally requested a relatively long time ago and it
does not provide any tangible benefit for users any more.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Rework SHA224 and SHA283 documentation.
Define MBEDTLS_SHAxxx_C options in alphabetic order.
Fix SHA224 and SHA384 dependencies in test suites.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
To avoid the MAC tests from being run when only part of the driver
wrappers (not including MAC) are being configured for test.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Although SHA512 is currently required to enable SHA384, this
is expected to change in the future. This commit is an
intermediate step towards fully separating SHA384 and SHA512.
check_config is the only module which enforces that SHA512 is
enabled together with SHA384.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Remove some accidental newlines that were added previously.
Update some definition guards to make it clearer that
`MBEDTLS_X509_REMOVE_INFO` is defined and not undefined.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The introduction of positive options to control the presence
of pre-existing functionality breaks the build for users of
handwritten configurations.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Introduce MBEDTLS_X509_INFO to indicate the availability of the
mbedtls_x509_*_info() function and closely related APIs. When this is
not defined, also omit name and description from
mbedtls_oid_descriptor_t, and omit OID arrays, macros, and types that
are entirely unused. This saves several KB of code space.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add implementation for MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
Merging as it has been ready for four days now and I prefer not having to go through other rebases especially given the coming change of scope of development (3.0 rather than 2.2x).
The GCM interface now has separate functions to start the operation
and to pass the associated data.
This is in preparation for allowing the associated data to be passed
in chunks with repeatated calls to mbedtls_gcm_update_ad().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Alternative implementations of GCM may delay the output of partial
blocks from mbedtls_gcm_update(). Add an output length parameter to
mbedtls_gcm_update() to allow such implementations to delay the output
of partial blocks. With the software implementation, there is no such
delay.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Alternative implementations of GCM may delay the output of partial
blocks from mbedtls_gcm_update(). Add an output parameter to
mbedtls_gcm_finish() to allow such implementations to pass the final
partial block back to the caller. With the software implementation,
this final output is always empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_gcm_update now accepts inputs of arbitrary size. There is no
longer a requirement that all calls except the last one pass a
multiple of 16 bytes.
This commit updates the library code and adjusts the GCM tests to
exercise arbitrarily aligned input sizes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The existing GCM test suite only exercises the one-shot API. Also test
the multipart interface: systematically run it on the same test data,
with the input (plaintext or ciphertext) split in two parts.
Given the current limitations of the GCM API, the associated data is
always passed in a single shot to mbedtls_gcm_starts(), and the first
part of the input is a nonzero multiple of 16.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace all occurences of error code addition in the library with the new
MBEDTLS_ERROR_ADD macro.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The previous implementation of the error addition interface did not comply
with the invasive testing architecture guidelines. This commit fixes that
by:
- Renaming functions/macros/variables to follow the mbedtls_error_xxx or
mbedtls_test_hook_xxx convention.
- Making mbedtls_test_hook_error_add a global variable that can be set
by the testing code.
- Using a static inline function call, as opposed to macro, to keep
discrepancies between debug and production version to a minimum.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix builds where `MBEDTLS_ERROR_C` is not defined but `MBEDTLS_TEST_HOOKS`
is defined. This was previously causing undefined reference errors in
these builds.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`error.c` and error.h are the more logical place to keep this code and it
prevents issues with building `common.c` and conflicts with other projects
that use mbedtls (such as mbedOS).
`error.c` has been automatically generated by first adding the code to
`error.fmt` and then running `./scripts/generate_errors.pl`.
Also add parenthesis to the addition in `MBEDTLS_ERR_ADD`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix building by adding `common.c` to the build scripts (both make and Cmake).
Also reworks the hook function pointer (also renamed to `err_add_hook`) to be
a static local to `common.c` with a setter function to set the pointer to a
checking function.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`error.c` is a file generated from `error.h` and thus cannot contain the code
that was previously added. This commit fixes that issue by moving the
`MBEDTLS_ERR_ADD` macro and associated function and function pointer into
`common.h` and `common.c`.
Also fix a typo in `tests/include/test/helpers.h` where tabs were accidentally
used instead of spaces.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Adds a macro (`MBEDTLS_ERR_ADD`) to add error codes together and check that the
result will not be corrupted. This additional check is only enabled during
testing when `MBEDTLS_TEST_HOOKS` is defined.
Also includes a reference usage example in `rsa.c` where two high-level error
codes could be incorrectly added together under the right conditions. This now
ensures that when this error occurs during testing it will be correctly
reported.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Corresponds better to the validation done in other modules of PSA Crypto.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The aead_encrypt and aead_decrypt are lightly
simplified and tweaked versions of test_suite_psa_crypto
test functions with the same names.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This was a mistake, there's no reason for the dependencies to be
commented out. The dependencies on PSA_WANT_ALG_EDDSA aren't actually
necessary at the moment, but they might be in certain configurations
if some macros are simplified to save code size.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Write a simple unit test for mbedtls_ecp_muladd().
Add just one pair of test cases. #2 fails since PR #3512. Thanks to
Philippe Antoine (catenacyber) for the test case, found by ecfuzzer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix expected error code when importing a persistent key or
registering a key with an invalid key identifier:
PSA_ERROR_INVALID_ARGUMENT instead of PSA_ERROR_INVALID_HANDLE.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add negative tests checking that psa_copy_key()
returns PSA_ERROR_INVALID_ARGUMENT when passed in
an invalid key identifier or key lifetime for the
target key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit adds a test exercising the reader in a random way
and comparing the outcomes against what we expect based on the
abstract model of the reader from the producer's and consumer's
perspective.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds an MPS unit test suite `test_suite_mps` which will
subsequently be populated with unit tests for all components of MPS.
As a start, a test case
```
mbedtls_mps_reader_no_pausing_single_step_single_round()
```
is added which exercises the most basic usage of the MPS reader
component; see the test case description for more details.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Add the test keys from RFC 8032 (§7.1 Ed25519 "TEST 1", §7.4 Ed448 "Blank").
This replaces the generic byte-sized data used for unknown key types
which no longer works now that Ed25519 is considered to have 255 bits.
Re-generate the automatically generated test data accordingly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Define algorithms for PureEdDSA and for HashEdDSA, the EdDSA variants
defined by RFC 8032.
The encoding for HashEdDSA needs to encode the hash algorithm so that
the hash can be calculated by passing PSA_ALG_SIGN_GET_HASH(sig_alg)
to psa_hash_compute() or psa_hash_setup(). As a consequence,
Ed25519ph (using SHA-512) and Ed448ph (using SHAKE256) need to have
different algorithm encodings (the key is enough to tell them apart,
but it is not known while hashing). Another consequence is that the
API needs to recognize the Ed448 prehash (64 bytes of SHAKE256 output)
as a hash algorithm.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add an elliptic curve family for the twisted Edwards curves
Edwards25519 and Edwards448 ("Goldilocks"). As with Montgomery curves,
since these are the only two curves in common use, the family has a
generic name.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Given the PSA_WANT_* config options added lately,
update set_psa_test_dependencies.py and run it
on test_suite_psa_crypto*.data files but the SE
and generated ones.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix likely harmless undefined behavior in cipher tests pointed out by
UBSan with recent compilers (e.g. Clang 10). When the complete output
is empty, the output buffer is NULL. Adding an integer to a null
pointer is undefined behavior even when the integer is 0, so make a
special case for that.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace MBEDTLS_* config options for which there is
an associated PSA_WANT_* to the PSA_WANT_* one. That
way the tests are also run when the dependency is
provided by a driver.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Update expected return values of psa_get_key_attributes(),
psa_export_key() and other key api(s) to PSA_ERROR_INVALID_HANDLE
for invalid key.
Signed-off-by: Maulik Patel <Maulik.Patel@arm.com>
Generate test cases for all algorithms without parameters. Only the encoding
of the algorithm in the key metadata is covered: the test keys are not of a
type that permits the algorithm to be used in an operation.
This commit only covers algorithms without parameters. A subsequent commit
will generate algorithms with parameters.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Update this based on the output of the generator script. The Brainpool
curves are now supported, since they are spelled properly in the config.
Signed-off-by: David Brown <david.brown@linaro.org>
The commit
commit dcdde59c6f
Author: David Brown <david.brown@linaro.org>
Date: Tue Feb 23 15:48:13 2021 -0700
tests: psa: Change Elliptic curve defines to PSA names
when rebased on
commit bb9cbc7a23
Author: Ronald Cron <ronald.cron@arm.com>
Date: Thu Mar 4 17:09:00 2021 +0100
psa: ecdsa: Prefer NOT_SUPPORTED error code
had an incorrect merge conflict resolution. Correct this, allowing the
test "PSA sign: invalid algorithm for ECC key" to pass again.
Signed-off-by: David Brown <david.brown@linaro.org>
Generate test cases for all key types. These test cases cover the key
representation (checked with export) and the encoding of the key type and
the bit-size.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Start generating storage format test cases. This commit introduces two test
data files: test_suite_psa_crypto_storage_format.v0.data for reading keys in
storage format version 0 (the current version at this time), and
test_suite_psa_crypto_storage_format.current.data for saving keys in the
current format (version 0 at this time).
This commit kicks off the test case generation with test cases to exercise
the encoding of usage flags. Subsequent commits will cover other aspects of
keys.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Save tests are for forward compatibility: import a key in the current format
and check that it has the expected storage format so that future versions
will still be able to read it.
Read tests are for backward compatibility: read a key in the format of a
past version (injected into storage) and check that this version can use it.
Exercise the key unless it is meant to test metadata storage only.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Now that PSA crypto config supports the new PSA_WANT_ECC_xxx defines,
change the psa-specific test suites to use these new names.
Signed-off-by: David Brown <david.brown@linaro.org>
Printf could potentially produce 2 64 bit numbers here when there is
only space for one, thus causing a buffer overflow. This was caught by
the new warning flags.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
`entropy_poll.h` is not supposed to be used by application code and
is therefore being made internal.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Revert changes introduced in 50518f4195
as it is now clear that these headers are internal without the
`*_internal.h` suffix.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Rename both `rsa_internal.h` and `rsa_internal.c` to more descriptive
names: `rsa_alt_helpers.h` and `rsa_alt_helpers.c`.
Also re-orders `rsa_internal.c` to match the order in `rsa_internal.h`
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Simple find and replace using `#include (<|")mbedtls/(.*)_internal.h(>|")`
and `#include $1$2_internal.h$3`.
Also re-generated visualc files by running
`scripts/generate_visualc_files.pl`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Only move `rsa_internal.h` for now to test dependancies. Other internal
headers will be moved in following commits.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
When ECDSA is not supported by the library, prefer
to return NOT_SUPPORTED than INVALID_ARGUMENT when
asked for an ECDSA signature.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move the check that ECDSA is supported from the
caller of the function responsible for Mbed TLS
ECDSA signatures to this function, namely
mbedtls_psa_ecdsa_sign_hash().
This makes the caller code more readable and is
more aligned with what is expected from a
sign_hash() PSA driver entry point.
Add a negative test case where a deterministic
ECDSA signature is requested while the library
does not support deterministic ECDSA.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reworked the validation of MAC algorithm with the used key type by
introducing psa_mac_key_can_do, which guarantees that PSA_MAC_LENGTH can
be called successfully after validation of the algorithm and key type.
This means psa_get_mac_output_length is no longer required.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Marked dirty memory ends up in the result buffer after encoding (due to
the input having been marked dirty), and then the final comparison
to make sure that we got what we expected was triggering the constant
flow checker.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fix sloppy wording around stricly less-than vs less or equal in
comments. Also fix an off-by-one error in a comparison which led to
calling setrlimit if the limit was exactly the minimum required for
the test, which was unnecessary but harmless.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_net_poll() and mbedtls_net_recv_timeout() rely on select(),
which represents sets of file descriptors through the fd_set type.
This type cannot hold file descriptors larger than FD_SETSIZE. Make
sure that these functions identify this failure code.
Without a proper range check of the file descriptor in the
mbedtls_net_xxx function, this test fails when running with UBSan:
```
net_poll beyond FD_SETSIZE ........................................ source/library/net_sockets.c:482:9: runtime error: index 16 out of bounds for type '__fd_mask [16]'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior source/library/net_sockets.c:482:9 in
```
This is a non-regression test for
https://github.com/ARMmbed/mbedtls/issues/4169 .
The implementation of this test is specific to Unix-like platforms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A place to put tests for the net_sockets module (MBEDTLS_NET_C feature).
Start with a context smoke test.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The primary goal of this commit is to fix various comments where
`clang -Wdocumentation` identified a discrepancy between the actual
function parameters and the documented parameters. The discrepancies
were due to copypasta, formatting issues or documentation that had
diverged from the implementation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This ensures that test cases won't leave persistent files behind even
on failure, provided they use TEST_USES_KEY_ID(). Test cases that
don't use this macro are unaffected.
Tests that use PSA_DONE() midway and expect persistent keys to survive
must use PSA_SESSION_DONE() instead.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Merge the two identical definitions of TEST_USES_KEY_ID and
mbedtls_test_psa_purge_key_storage from
test_suite_psa_crypto_slot_management.function and
test_suite_psa_crypto_se_driver_hal.function into a single copy in
common test code so that it can be used in all test suites.
No semantic change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Persistent storage common code from
test_suite_psa_crypto_slot_management.function had been duplicated in
test_suite_psa_crypto_se_driver_hal.function and the copy had slightly
diverged. Re-align the copy in preparation from moving the code to a
common module and using that sole copy in both test suites.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move mbedtls_test_psa_exercise_key() (formerly exercise_key()) and
related functions to its own module. Export the few auxiliary
functions that are also called directly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
exercise_export_key() exports the key and does sanity checks on the
result. Here we've already just exported the key, so just run the
sanity checks.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename functions to mbedtls_test_psa_xxx if they're going to be
exported. Declare functions as static if they're aren't meant to be
called directly from test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These tests validate that an entropy object can be reused and that
calling mbedtls_entropy_free() twice is ok.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These tests are trivial except when compiling with MBEDTLS_THREADING_C
and a mutex implementation that are picky about matching each
mbedtls_mutex_init() with exactly one mbedtls_mutex_free().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If the mutex usage verification framework is enabled and it detects a
mutex usage error, report this error and mark the test as failed.
This detects most usage errors, but not all cases of using
uninitialized memory (which is impossible in full generality) and not
leaks due to missing free (which will be handled in a subsequent commit).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When using pthread mutexes (MBEDTLS_THREADING_C and
MBEDTLS_THREADING_PTHREAD enabled), and when test hooks are
enabled (MBEDTLS_TEST_HOOKS), set up wrappers around the
mbedtls_mutex_xxx abstraction. In this commit, the wrapper functions
don't do anything yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Some functions were not deinitializing the PSA subsystem. This could
lead to resource leaks at the level of individual test cases, and
possibly at the level of the whole test suite depending on the order
and selection of test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make USE_PSA_INIT() and USE_PSA_DONE() available in all test suites in
all cases, doing nothing if MBEDTLS_USE_PSA_CRYPTO is disabled. Use
those in preference to having explicit
defined(MBEDTLS_USE_PSA_CRYPTO) checks (but there may still be places
left where using the new macros would be better).
Also provide PSA_INIT() by symmetry with PSA_DONE(), functional
whenver MBEDTLS_PSA_CRYPTO_C is enabled, but currently unused.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In test_suite_psa_crypto_driver_wrappers test suite, the
sign/verify tests with software fallback tests should be run
only if the software fallback is available.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
A temporary hack: at the time of writing, not all dependency symbols
are implemented yet. Skip test cases for which the dependency symbols are
not available. Once all dependency symbols are available, this comit
should be reverted.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
PSA_KEY_TYPE_RAW_DATA and PSA_KEY_TYPE_DERIVE are always supported.
Make this explicit by declaring PSA_WANT_KEY_TYPE_RAW_DATA and
PSA_WANT_KEY_TYPE_DERIVE unconditionally. This makes it easier to
infer dependencies in a systematic way.
Don't generate not-supported test cases for those key types. They
would always be skipped, which is noise and would make it impossible
to eventually validate that all test cases pass in at least one
configuration over the whole CI.
Don't remove the exception in set_psa_test_dependencies.py for now, to
get less noise in dependencies. This may be revised later if it is
deemed more important to be systematic.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
ECC curve dependency symbols include the key size in addition to the
curve family. Tweak the dependencies once the key size is known.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This test data file is automatically generated. We could do that as
part of the build, since the only requirement is Python and we have a
requirement on Python to build tests anyway (to generate the .c file
from the .function file). However, committing the generating file into
the repository has less impact on build scripts, and will be necessary
for some of the files generated by generate_psa_tests.py (at least the
storage format stability tests, for which stability is guaranteed by
the fact that the generated file doesn't change). To keep things
simple, for now, let's commit all the files generated by
generate_psa_tests.py into the repository.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To start with, test that key creation fails as intended when the key
type is not supported. This commit only covers psa_import_key and
psa_generate_key. A follow-up will cover psa_key_derivation_output_key.
My primary intent in creating this new test suite is to automatically
generate test cases by enumerating the key types and algorithms that
the library supports. But this commit only adds a few manually written
test cases, to get the ball rolling.
Move the relevant test cases of test_suite_psa_crypto.data that only
depend on generic knowledge about the API. Keep test cases that depend
more closely on the implementation, such as tests of non-supported key
sizes, in test_suite_psa_crypto.data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Now that the support for key generation in the transparent
test driver is at the same level as the support in the
Mbed TLS library, remove the restriction on the generate
key test case that was introduced by the work on key
import and export through the PSA driver interface.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add a test in test_suite_psa_crypto_driver_wrappers that
when accelerators do not support the generation of a key
and there is no software fallback, the key generation
fails with the PSA_ERROR_NOT_SUPPORTED error code.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This brings them in line with PSA Crypto API 1.0.0
PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH -> PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
PSA_ALG_AEAD_WITH_TAG_LENGTH -> PSA_ALG_AEAD_WITH_SHORTENED_TAG
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Add macros to skip a test case when hitting a
common alternative implementation limitation.
Add a macro for AES-192 and GCM with a nonce
length different from 12 bytes.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Make sure MBEDTLS_PSA_CRYPTO_CLIENT is defined
when MBEDTLS_PSA_CRYPTO_C is defined and guard
PSA client code only with MBEDTLS_PSA_CRYPTO_CLIENT.
The definition of MBEDTLS_PSA_CRYPTO_CLIENT is done
in crypto_types.h before the definition of
psa_key_attributes_t. That way as PSA crypto client
code is related to key attributes we can be quite
confident that MBEDTLS_PSA_CRYPTO_CLIENT will be
defined when needed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move test macros previously located in `suites/helpers.function` to
`include/test/macros.h`. This makes these test infrastructure macros
available for use in other parts of the test infrastructure at compile
time as opposed to run time.
This commit is a simple cut and paste from one file to the other.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Check that the source address and the frame counter have the expected
length. Otherwise, if the test data was invalid, the test code could
build nonsensical inputs, potentially overflowing the iv buffer.
The primary benefit of this change is that it also silences a warning
from compiling with `gcc-10 -O3` (observed with GCC 10.2.0 on
Linux/amd64). GCC unrolled the loops and complained about a buffer
overflow with warnings like:
```
suites/test_suite_ccm.function: In function 'test_mbedtls_ccm_star_auth_decrypt':
suites/test_suite_ccm.function:271:15: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
271 | iv[i] = source_address->x[i];
| ~~~~~~^~~~~~~~~~~~~~~~~~~~~~
suites/test_suite_ccm.function:254:19: note: at offset [13, 14] to object 'iv' with size 13 declared here
254 | unsigned char iv[13];
```
Just using memcpy instead of loops bypasses this warnings. The added
checks are a bonus.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function generate_random allocated a few extra bytes after
the expected output and checked that these extra bytes were not
overwritten. Memory sanity checks such as AddressSanitizer and
Valgrind already detect this kind of buffer overflow, so having this
test in our code was actually redundant. Remove it.
This has the benefit of not triggering a build error with GCC
(observed with 7.5.0 and 9.3.0) when ASan+UBSan is enabled: with the
previous code using trail, GCC complained about an excessively large
value passed to calloc(), which was (size_t)(-sizeof(trail)).
Thus this commit fixes#4122.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Attempting to create an ECC key with a curve specification that is not
valid can plausibly fail with PSA_ERROR_INVALID_ARGUMENT ("this is not
a curve specification at all") or PSA_ERROR_NOT_SUPPORTED ("this may
be a curve specification, but not one I support"). The choice of error
is somewhat subjective.
Before this commit, due to happenstance in the implementation, an
attempt to use a curve that is declared in the PSA API but not
implemented in Mbed TLS returned PSA_ERROR_INVALID_ARGUMENT, whereas
an attempt to use a curve that Mbed TLS supports but for which support
was disabled at compile-time returned PSA_ERROR_NOT_SUPPORTED. This
inconsistency made it difficult to write negative tests that could
work whether the curve is implemented via Mbed TLS code or via a
driver.
After this commit, any attempt to use parameters that are not
recognized fails with NOT_SUPPORTED, whether a curve with the
specified size might plausibly exist or not, because "might plausibly
exist" is not something Mbed TLS can determine.
To keep returning INVALID_ARGUMENT when importing an ECC key with an
explicit "bits" attribute that is inconsistent with the size of the
key material, this commit changes the way mbedtls_ecc_group_of_psa()
works: it now works on a size in bits rather than bytes, with an extra
flag indicating whether the bit-size must be exact or not.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test random generation as a whole. This is different from
test_suite_*_drbg and test_suite_entropy, which respectively test PRNG
modules and entropy collection.
Start with basic tests: good-case tests, and do it twice and compare
the results to validate that entropy collection doesn't repeat itself.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Both tests do not require a lot of RAM, even though it may seem
like it at first sight. The derivation output is generated blockwise
from the KDF function, which only keeps state amounting to a couple
of blocks of the underlying hash primitive at a time.
There is never an allocation to keep the full derivation capacity in
memory...
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Add doxygen style documentation to `mbedtls_test_fail`, `mbedtls_test_skip`,
`mbedtls_test_set_step` and `mbedtls_test_info_reset`. This should make it
easier to understand how the test infrastructure is used.
Also make some minor style changes to meet the coding standards and make it
more obvious that `mbedtls_test_info.step` was being incremented.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a new function `mbedtls_test_info_reset()` to remove direct writes to
`mbedtls_test_info`. This change still allows values to be read directly
however all writes are now done inside of `helpers.c`.
Also slightly reordered code to make it easier to read.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix some export related tests that were
relying on the fact that the size of the
output buffer was checked after other
parameters.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The compilation guards in key_management.c are now
accelerator compilation guards (MBEDTLS_PSA_ACCEL_KEY_TYPE_xyz).
As a consequence when running the PSA driver wrapper
tests as part of test_psa_crypto_config_basic
and test_psa_crypto_drivers all.sh components all
key management cryptographic operations were handled by
the software builtin fallback, and not by the test driver
as intended in the first place.
This commits fixes this issue by:
. declaring an accelerator for ECC key pairs in
test_psa_crypto_config_basic.
. declaring an accelerator for both ECC and RSA
key pairs in test_psa_crypto_drivers.
It is possible to declare an accelerator for both
ECC and RSA key pairs in test_psa_crypto_drivers
and not in test_psa_crypto_config_basic because
in the case of test_psa_crypto_drivers the new
PSA configuration is not activated. That way,
the builtin fallback software implementation
is present to supply the transparent test driver
when some support is missing in it (mainly
RSA key generation).
Note that the declaration of accelerators does
much more than just "fixing" the execution flow of
driver wrapper tests, it makes all import and public
key export cryptographic operations in all unit
tests being handled by the transparent test driver
(provided that it supports the key type).
One test case related to key generation is
partially disabled. This will be fixed with the
rework of psa_generate_key along the lines
described in psa-crypto-implementation-structure.md.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In test_suite_psa_crypto_driver_wrappers test suite, the
generate key with software fallback test should be run
only if the software fallback is available.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add test cases for mbedtls_mpi_sub_abs() where the second operand has
more limbs than the first operand (which, if the extra limbs are not
all zero, implies that the function returns
MBEDTLS_ERR_MPI_NEGATIVE_VALUE).
This exposes a buffer overflow (reported in #4042).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Storage format tests that only look at how the file is structured and
don't care about the format of the key material don't depend on any
cryptographic mechanisms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The negative test cases for psa_copy_key() don't actually care whether
the target policy is supported. This is similar to _key_policy tests.
Add a similar rule.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function asymmetric_signature_key_policy combines positive
and negative tests inside the code, so it doesn't take a status as its
last argument.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Switch dependencies on MBEDTLS_xxx to PSA_WANT_xxx for hash
algorithms.
Add a missing dependency in bad_order functions (it was previously
expressed in the .data file, but this is no longer the case when
dependencies in the .data file are determined automatically).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace manually written dependencies on MBEDTLS_xxx with
PSA_WANT_xxx dependencies that are determined automatically from the
test data.
Run tests/scripts/set_psa_test_dependencies.py on
tests/suites/test_suite_psa_crypto*.data,
except for the dynamic secure element tests in
tests/suites/test_suite_psa_crypto_se_driver_hal*.data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When using the test function persistent_key_load_key_from_storage with
DERIVE_KEY, there's a dependency on HKDF-SHA-256. Since this
dependency is in the code, declare it there rather than with the data.
If the depenency is not met, mark the test as skipped since it can't
create the key to be tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move PSA key attributes tests to their own
test suite to be able to run them when
MBEDTLS_PSA_CRYPTO_CLIENT is enabled but
not MBEDTLS_PSA_CRYPTO_C.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Adds the `mbedtls_` prefix to `test_result_t` and `test_info` and updates
any references to them. This is to follow the naming convention as these are
now declared in a public namespace.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Moves the functions `test_fail`, `test_set_step`, `test_skip` and the struct
`test_info` from `tests/suites/helpers.function` to `tests/src/helpers.*`.
This is done to open these functions up to the API where they can be used by
other functions in the 'src' test infrastructure module.
As the functions are now contained within the src folder of the testing
infrastructure, the `mbedtls_` prefix has been added to the functions.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`test_fail` automatically sets `test_info.result`. This commit removes a case
where `test_info.result` was being manually set after `test_fail` was called.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
- following the removal of the RSA_VALIDATE_RET() to check
the salt length, this test is not necessary/required anymore
- negative salt length are caught later in the function
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
- removed the check on saltlen > 0 and added tests
positive test cases for this.
- added negative test cases when even saltlen == 0
is not enough. This allowed to uncover an underflow bu
in the slen check (when olen-slen-2 is negative)
- fixed the saltlen check to avoid underflow
- added more test cases where saltlen is the maximum
possible value and one above the maximum possible value
(different hash, different key size)
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
TEST_ASSERT jumps to the exit label, so it must not be called from
cleanup code executed after the exit label. It's legitimate (and
indeed very common) to call PSA_DONE in cleanup code, so PSA_DONE must
not jump to exit.
Define an auxiliary function test_fail_if_psa_leaking() that calls
test_fail() with the error message provided by
mbedtls_test_helper_is_psa_leaking(). This function currently needs to
be in helpers.function rather than in a PSA-specific helper file
because it calls test_fail which is defined in helpers.function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't microoptimize memory usage in tests: use separate buffers for
the input and the output. Allocate the input buffer dynamically
because the size is a parameter of the test case. Allocate the output
buffer dynamically because it's generally good practice in tests so
that a memory sanitizer can detect a buffer overflow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When verifying the impact of a forced RNG failure, depend on the built-in
implementation of the algorithm that uses randomization, whether it's
because the algorithm is randomized or because our implementation uses
randomization for (e.g.) blinding. An external implementation could use
its own randomness source which is not affected by the forced failure of
the RNG driver.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Under MBEDTLS_ERR_RSA_RNG_FAILED, add tests where the random generator
failed. This commit tests the following operations:
* psa_generate_random()
* psa_generate_key() for a symmetric key
* Deterministic signatures that use blinding (RSA PKCS#1v1.5,
deterministic ECDSA).
* Randomized signatures (RSA PSS, randomized ECDSA).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To reduce the risk of people accidentally using the test
implementation of mbedtls_psa_external_get_random(), which is
insecure, require the user to explicitly call
mbedtls_test_enable_insecure_external_rng() first.
Disabling the test implementation of mbedtls_psa_external_get_random()
will also allow negative testing for MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG,
which will be added in a subsequent commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Include psa_crypto_helpers.h automatically if MBEDTLS_PSA_CRYPTO_C is
enabled, like helpers.h is included automatically.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
psa_crypto_helpers.h no longer defines static functions, so it can be
included anywhere without worrying about unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test suite assumed that if SHA512 was enabled, then
SHA384 was also available. This is not true. There is
config MBEDTLS_SHA512_NO_SHA384 which allows precisely
to add SHA512 and not SHA384.
This commits adds the necessary `depends_on` clause,
to avoid running the SHA384 tests when config
MBEDTLS_SHA512_NO_SHA384 is set.
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
- all positibe test cases were sampled from the CAVP test suite
(SigGenPSS_186-2.txt, SigGenPSS_186-3.txt)
Only kept one representative for each triple (modlen, sha, saltlen)
- two extra test cases were added to cover the maximum salt length
(slen=olen-slen-2 and slen=(olen-slen-2)-1)
- in rsa.c, the salt intermediate buffer was too small to cover cases
where slen > hlen. So reworked the code to generate the salt in the
encoded message directly. This has the advantage to remove a memcpy
and a memset.
Signed-off-by: Cédric Meuter <cedric.meuter@gmail.com>
Make it clear that this is an abstraction of the random generator
abstraction, and not an abstraction of the PSA random generator.
mbedtls_psa_get_random and MBEDTLS_PSA_RANDOM_STATE are public-facing
definitions and will be moved in a subsequent commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Executed ./scripts/bump_version.sh --version 2.25.0 --so-crypto 6
Increasing the SO version of the crypto library, because the openless
API improvement came with API/ABI incompatibilities. For example
- the size of psa_key_handle_t changed
- the type of a parameter in 18 public functions has changed from
psa_key_handle_t to mbedtls_svc_key_id_t
Signed-off-by: Janos Follath <janos.follath@arm.com>
In order to remove large buffers from the stack, the der data is written
into the same buffer that the pem is eventually written into, however
although the pem data is zero terminated, there is now data left in the
buffer after the zero termination, which can cause
mbedtls_x509_crt_parse to fail to parse the same buffer if passed back
in. Patches also applied to mbedtls_pk_write_pubkey_pem, and
mbedtls_pk_write_key_pem, which use similar methods of writing der data
to the same buffer, and tests modified to hopefully catch any future
regression on this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Make sure that if a buffer is allowed to be empty, a null pointer is
accepted if the buffer length is 0. This was already the case for most
but not all arguments to mbedtls_cipher_auth_{en,de}crypt{,_ext}.
Make sure to pass NULL for an empty buffer in the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run all the addition and subtraction tests with the result aliased to
the first operand and with the result aliased to the second operand.
Before, only some of the aliasing possibilities were tested, for only
some of the functions, with only some inputs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fixes an issue where configs that had `MBEDTLS_MPI_MAX_BITS` greater than 256
but smaller than the test that was running (792 bits) the test would fail
incorrectly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Move dependancy on `MBEDTLS_MPI_MAX_BITS` to apply to the specific test cases
which will break when `MBEDTLS_MPI_MAX_BITS` is too small. This re-enables
previous tests that were turned off accidentally.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Previously `mbedtls_mpi_exp_mod` was tested with values that were over
`MBEDTLS_MPI_MAX_SIZE` in size. This is useful to do as some paths are only
taken when the exponent is large enough however, on builds where
`MBEDTLS_MPI_MAX_SIZE` is under the size of these test values.
This fix turns off these tests when `MBEDTLS_MPI_MAX_SIZE` is too small to
safely test (notably this is the case in config-thread.h).
Signed-off-by: Chris Jones <christopher.jones@arm.com>
In two test cases, the exponentiation computation was not being fully tested
as when A_bytes (the base) == N_bytes (the modulus) -> A = N. When this is the
case A is reduced to 0 and therefore the result of the computation will always
be 0.
This fixes that issue and therefore increases the test coverage to ensure
different computations are actually being run.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reword test cases to be easier to read and understand.
Adds comments to better explain what the test is doing.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
This temporarily breaks all.sh '*deprecated*' (deprecated functions still used
in the library), which will be fix in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We want to test both sets of functions (ext and non-ext) in turn, so goto exit
is not really and option.
Also, separate setting up the context (which is going to be the same for both
ext and non-ext functions) from setting up the buffers (which will vary).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add two further boundary tests for cases where both the exponent and modulus to
`mbedtls_mpi_exp_mod()` are `MBEDTLS_MPI_MAX_SIZE`, or longer, bytes long.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
* development: (488 commits)
Fix removal of deprecated PSA constants
Use GitHub-compatible table formatting
Remove psa header files in uninstall part
Change function casting in `ssl_calc_finished_tls_sha384`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Add changelog entry file to `ChangeLog.d`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Fix GCC warning about `test_snprintf`
Fix mismatched function parameters (prototype/definition)
Fix build failure on gcc-11
Copyediting
Clarifications around key import
Fix copypasta
A variable is unused in some configurations
Rename test_driver_keygen to test_driver_key_management
Move "internal use" sentence attached to the wrong function
Added changelog
Plug in the entry point for public key export through driver
tests: psa: Reset key attributes where needed
Improve/fix documentation
...
Adds test cases to ensure that `mbedtls_mpi_exp_mod` will return an error with
an exponent or modulus that is greater than `MBEDTLS_MPI_MAX_SIZE` in size.
Adds test cases to ensure that Diffie-Hellman will fail to make a key pair
(using `mbedtls_dhm_make_public`) when the prime modulus is greater than
`MBEDTLS_MPI_MAX_SIZE` in size.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add a test case to ensure `mbedtls_mpi_exp_mod` fails when using a key size
larger than MBEDTLS_MPI_MAX_SIZE.
Add a test case to ensure that Diffie-Hellman operations fail when using a key
size larger than MBEDTLS_MPI_MAX_SIZE.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add missing tag check for algorithm parameters when comparing the
signature in the description part of the cert against the actual
signature whilst loading a certificate. This was found by a
certificate (created by fuzzing) that openssl would not verify, but
mbedtls would.
Regression test added (one of the client certs modified accordingly)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
mbedtls_ctr_drbg_set_reseed_interval() and
mbedtls_hmac_drbg_set_reseed_interval() can now be called before
their seed functions and the reseed_interval value will persist.
Previously it would be overwritten with the default value.
*_drbg_reseed_interval is now set in init() and free().
mbedtls_ctr_drbg_free() and mbedtls_hmac_drbg_free() now
reset the drbg context to the state immediately after init().
Tests:
- Added test to check that DRBG reseeds when reseed_counter
reaches reseed_interval, if reseed_interval set before seed
and reseed_interval is less than MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
Signed-off-by: gacquroff <gavina352@gmail.com>
Positive tests: test that the RNG has the expected size, given that we
know how many leading zeros it has because we know how the function
consumes bytes and when the test RNG produces null bytes.
Negative tests: test that if the RNG is willing to emit less than the
number of wanted bytes, the function fails.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
GCC 11 generated the warnings because the parameter `ret_buf`
was declared as `const char[10]`, but some of the arguments
provided in `run_test_snprintf` are shorter literals, like "".
Now the type of `ret_buf` is `const char *`.
Both implementations of `test_snprintf` were fixed.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
Support using HMAC_DRBG instead of CTR_DRBG in the PSA subsystem.
Use HMAC_DRBG if CTR_DRBG is available. Choose between SHA-256 and
SHA-512 based on availability.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Implement support for MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG.
For test purposes, write an implementation that uses libc rand().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
After a call to psa_get_key_attributes() to retrieve
the attributes of a key into a psa_key_attributes_t
structure, a call to psa_reset_key_attributes() is
mandated to free the resources that may be
referenced by the psa_key_attributes_t structure.
Not calling psa_reset_key_attributes() may result in
a memory leak.
When a test function calls psa_get_key_parameters()
the associated key attributes are systematically
reset in the clean-up part of the function with a
comment to emphasize the need for the reset and make
it more visible.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For consistency across the code base, prefer
persistent over permanent to qualify a key
stored in persistent storage.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When looking for an empty key slot to store
the description of a key, if all key slots
are in use, reuse the first encountered
and unaccessed key slot containing the
description of a permanent key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The identifier of keys created/registred should be in
the application range.
This is by spec for key creation.
This may change for registered key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The lifetime of key attributes now encodes whether a key is
volatile/persistent or not AND its location.
Fix PSA code where the fact that the lifetime encodes
the key location was not taken into account properly.
Fix the impacted tests and add two non regression tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When key identifiers encode key owner, add tests
checking that:
. the key owner of an imported volatile key is
the one specified.
. a key identifier of a volatile key with a valid
PSA key identifier but the wrong owner is
rejected.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers in the vendor range are
reserved to volatile keys thus don't allow them
for persistent keys when creating a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For persistent keys there were two successive
INVALIDATE_BY_(CLOSING/DESTROYING) identical tests
where the comments of the second test rather
indicated that it should had been an
INVALIDATE_BY_(CLOSING/DESTROYING)_WITH_SHUTDOWN test.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ways of invalidating keys before introducing
key purging tests because the "CLOSE_BY" prefix doesn't
get on well with the purge operation.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As handles are now key identifiers, a handle may be
valid now even if it does not refer to any key
known to the library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The ccm tests were previously relying on unspecified behaviour in
the underlying implementation (i.e. that it rejects certain buffer
sizes without reading the buffer).
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
The CCM specification (NIST SP 800-38C) mandates that the formatting of
the additional data length l(a) changes when it is greater _or equal_ to
2^16 - 2^8 (>= 0xFF00). Since such lengths are not supported in mbed TLS,
the operation should fail in such cases.
This commit fixes an off-by-one error which allowed encryption/decryption
to be executed when l(a) was equal to 0xFF00, resulting in an
incorrect/non-standard length format being used.
Fixes#3719.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
* Stores bits in psa_persistent_key_storage_format.
* psa_load_persistent_key_into_slot still imports plaintext keys which
ensures that the bits value gets set.
* Updates key specification to match new implementation.
* Expands persistent store and load tests with to check for bits
attribute.
* Removes bits storage from psa_se_key_data_storage_t.
Signed-off-by: Torstein Nesse <torstein.nesse@silabs.com>
* #3742 After input of a key as SECRET in the derivation, allow the
derivation result to be used as key.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
* #3741 Allow key agreement inside derivation with a key that's allowed
for the relevant agreement.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Test import and key generation, each followed by a key agreement. Only
good cases in this commit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
... as opposed to PSA_ERROR_BAD_STATE.
The spec on psa_cipher_finish() states that PSA_ERROR_INVALID_ARGUMENT
should be returned when:
"The total input size passed to this operation is not valid for this
particular algorithm. For example, the algorithm is a based on block
cipher and requires a whole number of blocks, but the total input size
is not a multiple of the block size."
Currently, there is a distinction between encryption and decryption
on whether INVALID_ARGUMENT or BAD_STATE is returned, but this is not
a part of the spec.
This fix ensures that PSA_ERROR_INVALID_ARGUMENT is returned
consistently on invalid cipher input sizes.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
* Reworked the cipher context once again to be more robustly defined
* Removed redundant memset
* Unified behaviour on failure between driver and software in cipher_finish
* Cipher test driver setup function now also returns early when its status
is overridden, like the other test driver functions
* Removed redundant test cases
* Added bad-order checking to verify the driver doesn't get called where
the spec says it won't.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
ssl_tls1_3_keys.c exports a structure containing all labels used
in the TLS 1.3 key schedule, but the TLS 1.3 key scheduling unit
tests so far replicated those labels in the test file. In particular,
wrong label values in ssl_tls1_3_keys.c wouldn't have been caught
by the unit tests.
This commit modifies the TLS 1.3 key schedule unit tests to use
the TLS 1.3 labels as exported by ssl_tls1_3_keys.c. This not only
makes sure that those labels are correct, but also avoids hardcoding
their hex-encoding in the test file.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The pk_ec_test_vec() was incorrectly using MBEDTLS_MD_SHA1 for the
parameter to mbedtls_pk_verify(). It should use MBEDTLS_MD_NONE since
that parameter is ignored for this test case.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
The relevant test functions are already marked as depending on
`MBEDTLS_SSL_PROTO_TLS1_3_EXPERIMENTAL`, so there's no need
to re-state this dependency for each test case.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
* Moved test data to .data file
* Bundled test driver hook variables in a struct
* Style fixes
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Trying to compile in the PSA accelerator test driver under MBEDTLS_TEST_HOOKS
turned out to be awkward regarding existing builds. We'll put it under a
custom (not in config.h) define instead, since it's something that only
should happen in test.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The test function mbedtls_mpi_lt_mpi_ct did not initialize ret in test
code. If there was a bug in library code whereby the library function
mbedtls_mpi_lt_mpi_ct() did not set ret when it should, we might have
missed it if ret happened to contain the expected value. So initialize
ret to a value that we never expect.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To test the proper handling of owner identifier as of key
identifiers, add owner identifier(s) to tests having
key identifier(s) as test parameters. Just don't do it for
tests related to tests invalid values of key identifiers
as there is no owner identifier invalid values.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Delete key files based on declaration by test cases and
not based on a hardcoded list of identifiers as in
test_suite_psa_crypto_slot_management.function. This fixes
the fact that in case of error the file associated to the
key identifier PSA_KEY_ID_VENDOR_MAX was not purged
(register_key_smoke_test test function).
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove systematic deletion of key file associated to key
identifier 0 as this file is not created under the hood
anymore by the library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix PSA code and unit tests for the unit tests
to pass with key identifiers encoding owner
identifiers.
The changes in PSA code just make the enablement
of key identifiers encoding owner identifiers
platform independent. Previous to this commit,
such key identifiers were used only in the case
of PSA SPM platforms.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define always psa_key_id_t as defined in the PSA
Cryptography API specification independently of
whether the MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration file is set or not.
As a consequence, get rid of `psa_app_key_id_t` that is
not needed anymore.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of this commit and the following is for
psa_key_id_t to always be as defined by the PSA
Cryptography API specification.
Currently psa_key_id_t departs from its specification
definition when MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration flag is set. In that configuration, it is set
to be equal to psa_key_file_id_t which in that configuration
encodes an owner identifier along the key identifier.
Type psa_key_file_id_t was meant to be the key identifier type
used throughout the library code. If
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER is set it
includes both a key and owner identifier, otherwise it is
equal to psa_key_id_t.
It has not been the key identifier type throughout the
library so far because when the PSA Cryptography
specification was developped the library Doxygen
documentation was used to generate the PSA Cryptography API
specification thus the need to use psa_key_id_t and not
psa_key_file_id_t.
As this constraint does not hold anymore, move
to psa_key_file_id_t as the key identifier type throughout
the library code.
By the way, this commit updates the key identifier
initialization in the tests to be compatible with a
composit key identifier. A psa_key_id_make()
inline function is introduced to initialize key
identifiers (composit ot not) at runtime.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
If test_fail is called multiple times in the same test case, report
the location of the first failure, not the last one.
With this change, you no longer need to take care in tests that use
auxiliary functions not to fail in the main function if the auxiliary
function has failed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Return a name that more clearly returns nonzero=true=good, 0=bad. We'd
normally expect check_xxx to return 0=pass, nonzero=fail so
check_parity was a bad name.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An early draft of the PSA crypto specification required multipart
operations to keep working after destroying the key. This is no longer
the case: instead, now, operations are guaranteed to fail. Mbed TLS
does not comply yet, and still allows the operation to keep going.
Stop testing Mbed TLS's non-compliant behavior.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rely on Asan to detect a potential buffer overflow, instead of doing a
manual check. This makes the code simpler and Asan can detect
underflows as well as overflows.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the cleanup code for persistent_key_load_key_from_storage(), we
only attempt to reopen the key so that it will be deleted if it exists
at that point. It's intentional that we do nothing if psa_open_key()
fails here.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If any of the TEST_ASSERT()s that are before the call to
mbedtls_pk_warp_as_opaque() failed, when reaching the exit label
psa_destroy_key() would be called with an uninitialized argument.
Found by Clang.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* development:
Update copyright notices to use Linux Foundation guidance
Undef ASSERT before defining it to ensure that no previous definition has sneaked in through included files.
Add ChangeLog entry for X.509 CN-type vulnerability
Improve documentation of cn in x509_crt_verify()
Fix comparison between different name types
Add test: DNS names should not match IP addresses
Remove obsolete buildbot reference in compat.sh
Fix misuse of printf in shell script
Fix added proxy command when IPv6 is used
Simplify test syntax
Fix logic error in setting client port
ssl-opt.sh: include test name in log files
ssl-opt.sh: remove old buildbot-specific condition
ssl-opt.sh: add proxy to all DTLS tests
Signed-off-by: Dan Handley <dan.handley@arm.com>
The documentation of mbedtls_pk_wrap_as_opaque is quite clear:
* \param handle Output: a PSA key handle.
* It's the caller's responsibility to call
* psa_destroy_key() on that handle after calling
* mbedtls_pk_free() on the PK context.
But the test failed to call psa_destroy_key().
While at it, also use PSA_DONE(): it ensures that if we fail to destroy the
key, we'll get an explicit error message about it without the need for
valgrind.
This is a preliminary to adding a valgrind-based test for constant-flow code:
we need to make sure the rest of the tests are fully valgrind-clean, which
they weren't.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The tests are supposed to be failing now (in all.sh component
test_memsan_constant_flow), but they don't as apparently MemSan doesn't
complain when the src argument of memcpy() is uninitialized, see
https://github.com/google/sanitizers/issues/1296
The next commit will add an option to test constant flow with valgrind, which
will hopefully correctly flag the current non-constant-flow implementation.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
RFC5280 does not state that the `revocationDate` should be checked.
In addition, when no time source is available (i.e., when MBEDTLS_HAVE_TIME_DATE is not defined), `mbedtls_x509_time_is_past` always returns 0. This results in the CRL not being checked at all.
https://tools.ietf.org/html/rfc5280
Signed-off-by: Raoul Strackx <raoul.strackx@fortanix.com>
* development: (55 commits)
Log change as bugfix
Add changelog entry
Clarify updates to the persistent state in storage
With multiple applicable transparent drivers, the order is unspecified
Minor clarifications
Give some examples of purpsoses of pure-software transparent driver
Fix typos
Add a link to the PSA API specification
Explain locations vs lifetimes
Initialize key pointer in ecdh to NULL
Add buffer zeroization when ecp_write_key fails
Simplified key slot deletion
Style fixes
Use arc4random_buf instead of rand on NetBSD
Apply review feedback
Update open question section about public key storage
Remove the paragraph about declaring application needs
Change driver persistent data to a callback interface
Rework and expand key management in opaque drivers
Fix typos and copypasta
...
Since it is being dereferenced by free on exit it should be inited to NULL.
Also added a small test that would trigger the issue.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
PSA Crypto was checking the byte length of a to-be-imported public ECP key
against the expected length for Weierstrass keys, forgetting that
Curve25519/Curve448 exists.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The usage of "!memcmp()" is at least not recommended
and better to use the macro dedicated for buffer
comparisons.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The convention from the TLS RFC is a bit unusual, so even if the test
function's introductory comment mentions that we're taking the RFC's
definition, it doesn't hurt to repeat it in crucial places.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Passing a length of 0 to it is perfectly acceptable, the macro was designed to
handle it correctly.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We only have a single integer available for two nested loops, but the loop
sizes are small enough compared to the integer's range that we can encode both
indexes. Since the integer is displayed in decimal in case of errors, use a
power of 10 to pack the two indexes together.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently this breaks all.sh component test_memsan_constant_flow, just as
expected, as the current implementation is not constant flow.
This will be fixed in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Everything works at the byte level, not bit level. Flipping the lsb is just
one convenient way to corrupt a byte, but don't really care about individual
bits.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add a few more negative test cases for mbedtls_x509_crl_parse.
The test data is manually adapted from the existing positive test case
"X509 CRL ASN1 (TBSCertList, sig present)" which decomposes as
305c
3047 tbsCertList TBSCertList
020100 version INTEGER OPTIONAL
300d signatureAlgorithm AlgorithmIdentifier
06092a864886f70d01010e
0500
300f issuer Name
310d300b0603550403130441424344
170c303930313031303030303030 thisUpdate Time
3014 revokedCertificates
3012 entry 1
8202abcd userCertificate CertificateSerialNumber
170c303831323331323335393539 revocationDate Time
300d signatureAlgorithm AlgorithmIdentifier
06092a864886f70d01010e
0500
03020001 signatureValue BIT STRING
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function now depends on MBEDTLS_TEST_HOOKS, which is enabled by
config.py full, and since there are already components in all.sh exercising
the full config, this test function is sill exercised even with this new
dependency.
Since this is the first time a test function depends on MBEDTLS_TEST_HOOKS,
fix a bug in check-names.sh that wasn't apparent so far: headers from
library/*.h were not considered when looking for macro definitions. This
became apparent because MBEDTLS_STATIC_TESTABLE is defined in library/common.h
and started being used in library/ssl_msg.c, so was flagged as a likely typo.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The dummy implementation is not constant-flow at all for now, it's just
here as a starting point and a support for developing the tests and putting
the infrastructure in place.
Depending on the implementation strategy, there might be various corner cases
depending on where the lengths fall relative to block boundaries. So it seems
safer to just test all possible lengths in a given range than to use only a
few randomly-chosen values.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The ssl_tranform structure lacks some members accessed by this function when
CBC is not enabled.
This was found by test-ref-configs.pl and all.sh
test_when_no_ciphersuites_have_mac, so no need to add a new test.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Started as copies of the AES block, then:
- for ARIA, just s/AES/ARIA/
- for Camellia, just s/AES/Camellia/
- for 3DES, s/AES/3DES/ then s/3DES_128_CBC/DES_EDE3_CBC/ then manually
subtract 8 to all plaintext lengths that were > 8. This accounts for the
fact that the block size of DES is 8 not 16.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
All started from a copy of the SHA256 block and modified as follows:
- for MD5, just s/SHA256/MD5/
- for SHA384, adapt the dependency line then s/SHA256/SHA384
- for SHA1, s/SHA256/SHA1/ then manually adapt the plaintext length for the
cases with "!trunc, B-1" and "!trunc, B", as the MAC length (20) is not a
multiple of the block size (16) for this hash
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- plaintext length = 0 or 1
- plaintext length + MAC length = -1 or 0 mod block_size
(using the minimum plaintext length that works)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Compared to the previous approach of having the bad padding provided as input
to the testing function, this allows to test more kinds of incorrect data,
with less test cases in the .data file and more important no manually-generated
non-trivial data in the test case parameters, making it much easier to
complete the testing matrix.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
PSA_ALG_ECB_NO_PADDING came in to the PSA Crypto API spec v1.0.0, but
was not implemented yet in the mbed TLS implementation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
They did not match their description, probably due to a botched manual
endianness conversion where the nibbles also got swapped.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Follow the PSA Crypto specification which was updated between 1.0 beta3
and 1.0.0.
Add corresponding test cases.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
mbedtls_ecp_write_key is a mirror function to mbedtls_ecp_read_key, which
writes a private key back into a byte buffer in the correct format.
This is a helpful convenience function, since the byte order is defined
differently between Montgomery and Weierstrass curves. Since this difference
is accounted for in mbedtls_ecp_read_key, it made sense to add
mbedtls_ecp_write_key for the purpose of abstracting this away such that
psa_export_key doesn't need to take byte order into account.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Rename PSA_DH_GROUP_xxx to PSA_DH_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_GROUP to PSA_KEY_TYPE_DH_GET_FAMILY and rename
psa_dh_group_t to psa_dh_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Rename PSA_ECC_CURVE_xxx to PSA_ECC_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_CURVE to PSA_KEY_TYPE_ECC_GET_FAMILY and rename
psa_ecc_curve_t to psa_ecc_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
This makes the implementation of mbedtls_param_failed()
for testing purpose available to programs. Thus removing
the ad-hoc implementations in programs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving mbedtls_param_failed() to test
common code, isolate mbedtls_param_failed() long
jump data and set up from unit test data and code.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving mbedtls_param_failed() to test
common code, isolate mbedtls_param_failed() call check
from unit test data.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving mbedtls_param_failed() to test
common code, move mbedtls_param_failed() call location
record into a context dedicated to mbedtls_param_failed().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Do not hexify binary data to compare them, do compare
them directly. That simplifies the check code and save
memory.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove `hex` in name of variables of type data_t to reserve it
for variables of type char* that are the hexadecimal
representation of a data buffer.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Executed "./scripts/bump_version.sh --version 2.23.0 --so-crypto 5"
A symbol has been removed from the mbedcrypto library since the last
release:
mbedtls_ecc_group_to_psa ( enum mbedtls_ecp_group_id grpid,
size_t* bits )
This is an ABI break and we need to increase the SO version.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The metadata tests depend on the corresponding feature because there
is no guarantee that the metadata is correct if the feature is
disabled. There are metadata test cases for some algorithms and key
types that are declared but not supported. These test cases are
present but can never run.
It is debatable whether having these test cases is a good thing in
case they become runnable in the future, or a bad thing because
they're dead code. We're working on detecting test cases that are
never executed for accidental reasons (e.g. typo in a dependency or
missing configuration on the CI), and having test cases that are
deliberately never executed messes this up. So remove these test
cases. If we do implement the corresponding feature, it'll be easy to
add the corresponding metadata test cases.
The features that had metadata tests but no implementations were:
* SHA-512/256 and SHA-512/224 (hypothetical dependency: MBEDTLS_SHA512_256)
* DSA (hypothetical dependency: MBEDTLS_DSA_C)
* SHA-3 and HMAC-SHA-3 (hypothetical dependency: MBEDTLS_SHA3_C)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rework mbedtls_test_unhexify to extend its scope of usage.
Return in error when the function detects an error instead
of calling mbedtls_exit().
Improve safety by checking the output buffer is not overrun.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In test functions calling mbedtls_test_unhexify(), change the
type of the associated parameters from `char*` to `data_t`.
That way the `unhexify` operation is done by the test
framework and not by the unit test code.
Use for the new parameters of type data_t the name of the
local variable that use to store the `unhexify` version of
the `char*` parameter.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of mbedtls_ccm_star_encrypt_and_tag/auth_decrypt from
`char *` to `data_t` to get rid of the calls to
mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
- Use two different buffers to store the plain and cipher
text as expected by the library functions.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of aes_encrypt_ofb() from `char *` to `data_t` to get rid
of the calls to mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
- Add assertion on fragment_size parameter
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of mbedtls_nist_kw_wrap/unwrap() from `char *` to `data_t`
to get rid of the calls to mbedtls_test_unhexify():
- Change the name of parameters and local variables to
clarify which ones are related to the outputs of the
library functions under test and which ones are
related to the expected values of those outputs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters of
test_chacha20() from `char *` to `data_t` to get rid of the
calls to mbedtls_test_unhexify():
- Reduce the size of output[] buffer to 375 as its content
is "ASCII expended" into a buffer of 751 bytes.
- Align naming of variables to store and check the
output of mbedtls_chacha20_crypt(). No *dst* variables
anynore, only *output* variables.
- Use two different buffers to store the expected output
of mbedtls_chacha20_crypt() (expected_output_str[]) and
the ASCII string representation of the output of
mbedtls_chacha20_crypt() (output_string[]). Both were
stored in dst_str[] before.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of test_hkdf() from `char *` to `data_t` to get rid of the
calls to mbedtls_test_unhexify():
- Align naming of variables related to the expected okm
- Rename `okm_hex[]` to `okm_string[]`
- Added TEST_ASSERT( expected_okm_len <= sizeof( okm ) ) to check
that the okm[] buffer is large enough for the okm output.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of changing the type of some parameters
of some test functions from `char *` to `data_t` to get
rid of the calls to mbedtls_test_unhexify():
- Align the name of source data length local variable
with the name of the local variable containing the
source data, respectively src_str and src_str_len.
- Change the type of length, index local variables
from int to size_t.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Pass the "certificate policies" extension to the callback supplied to
mbedtls_x509_crt_parse_der_with_ext_cb() if it contains unsupported
policies. This allows the callback to fully replicate the behaviour
of the deprecated MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
configuration.
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
Another coverity bug - #350039
When this test discovers a key of the wrong type, it still throws it
through the export function in order to check that it too will detect
this as a not permitted action. For the buffer and buffer length
arguments it passes in a local pointer (which will most likely be NULL),
and the sizeof that pointer, as it knows that they will never be used.
Coverity rightly (imho) flagged this as suspicious - if we are going to
pass in incorrect parameters, at least make them obviously incorrect, and
ones that will not potentially cause errors if the code later changes.
There is, for example safety checks for zero length buffer, but less
protection for an insufficiently sized one.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep "\<mbedtls_test_rnd_"
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexcmp
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep unhexify_alloc
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexify
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of random.c file is to contain the helper
functions to generate random numbers that have been
in helpers.function so far.
The purpose of random.h is to contain the interface
exposed by random.c thus helper function prototypes.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of helpers.c file is to contain the helper
functions that have been in helpers.function so far and
that are not related to the mechanism of unit test
execution and not related to random number generation
(will be moved in a dedicated file).
The purpose of helpers.h is to contain the interface
exposed by helpers.c thus helper function prototypes.
Make the changes in the build systems (make and cmake)
to build helpers.c and link it to test executables
along with mbedtls library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix for coverity bugs 349041, 349052
Allocated pointers could potentially be leaked in the case of errors.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Strict platforms cannot be expected to accept C99 code as valid
when earlier standards versions are selected.
This helps the programs build on Solaris-like platforms (e.g.
illumos).
Fixes#3420
Signed-off-by: nia <nia@netbsd.org>
Just adding an empty file. The purpose of this header
file is to contain the definition of generic macros
used for the purpose of testing.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of moving the content of helpers.function
to its own compilation unit, remove/add static qualifiers
where appropriate.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Create an include folder dedicated to include files for
tests. With the upcoming work on tests for PSA crypto
drivers the number of includes specific to tests is going
to increase significantly thus create a dedicated folder.
Don't put the include files in the include folder but in
include/test folder. This way test headers can be included
using a test/* path pattern as mbedtls and psa headers
are included using an mbedtls/* and psa/* path pattern.
This makes explicit the scope of the test headers.
Move the existing includes for tests into include/test and
update the code and build systems (make and cmake)
accordingly.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add the min/max version negotiation tests from ssl-opt.sh as unit
tests for the sake of utility and easier running of tests during
development
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Invasive testing strategy
Create a new header `common.h`.
Introduce a configuration option `MBEDTLS_TEST_HOOKS` for test-specific code, to be used in accordance with the invasive testing strategy.
While at it, declare deps on ENTROPY as well.
A non-regression test will be added in a follow-up commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
TLS 1.3 and DTLS 1.2 + CID hide the real content type of a record
within the record's inner plaintext, while always using the same
content type for the protected record:
- TLS 1.3 always uses ApplicationData
- DTLS 1.2 + CID always uses a special CID content type.
This commit enhances the record encryption unit test to check
that the record content type is indeed correctly hidden.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Now that lifetimes have structures and secure element drivers handle
all the lifetimes with a certain location, update driver registration
to take a location as argument rather than a lifetime.
This commit updates the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
<stdio.h> only declares the non-ISO-C function fileno() if an
appropriate POSIX symbol is defined or if using a compiler such as GCC
in non-pedantic mode. Define the appropriate POSIX symbol.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When parsing a certificate with the basic constraints extension
the max_pathlen that was read from it was incremented regardless
of its value. However, if the max_pathlen is equal to INT_MAX (which
is highly unlikely), an undefined behaviour would occur.
This commit adds a check to ensure that such value is not accepted
as valid. Relevant tests for INT_MAX and INT_MAX-1 are also introduced.
Certificates added in this commit were generated using the
test_suite_x509write, function test_x509_crt_check. Input data taken
from the "Certificate write check Server1 SHA1" test case, so the generated
files are like the "server1.crt", but with the "is_ca" field set to 1 and
max_pathlen as described by the file name.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Enable MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 in the full config. There's
no reason to keep it out. We weren't testing it at all on the CI.
Add a missing dependency on !MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 to
some test cases that either were testing that v3 extensions are only
accepted in v3 certificates, or where parsing returns a different
error when MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 is enabled.
Add a few positive and negative test cases with
MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 enabled.
Fix one test case with MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 where the
intended output of mbedtls_x509_crt_info had changed in
890819a597 but the test case was missed
because it was never executed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit introduces two changes:
- Add in_msg and out_msg calculations for buffer upsizing. This was previously
considered as unnecessary, but renegotiation using certain ciphersuites needs
this.
- Improving the way out_msg and in_msg pointers are calculated, so that even
if no resizing is introduced, the pointers remain the same;
New tests added:
- various renegotiation schemes with a range of MFL's and ciphersuites;
- an ssl-opt.sh test exercising two things that were problematic: renegotiation
with TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8 and a server MFL that's smaller
than the one negotiated by the client.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The identifiers of the unmet dependencies of a test case are
stored in a buffer of fixed size that can be potentially to
small to store all the unmet dependencies. Indicate in test
reports if some unmet dependencies are missing.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix potential buffer overflow when tracking the unmet dependencies
of a test case. The identifiers of unmet dependencies are stored
in an array of fixed size. Ensure that we don't overrun the array.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix an intermittent crash when running test suites in non-verbose
mode (i.e. with -v off) and with the outcome file enabled. The
array unmet_dependencies was only filled in verbose mode, but was used
in write_outcome_result regardless.
Since unmet_dependencies only ever contains strings that are integers
written out in decimal, store the integer instead. Do this
unconditionally since it doesn't cost any extra memory.
It would be better to record the dependency names, both in the verbose
output and in the outcome file. But the dependency names are not
currently available at runtime.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
* .github/issue_template.md, .github/pull_request_template.md:
The changes in Mbed Crypto are not relevant to Mbed TLS. Keep the
mbedtls versions.
Merge the latest state of the target branch (mbedtls/development) into the
pull request to merge mbed-crypto into mbedtls.
Conflicts:
* ChangeLog: add/add conflict. Resolve by using the usual section order.
Add dependencies on !MBEDTLS_SHA512_NO_SHA384 to X.509 and SSL unit
tests that use SHA-384 (identified based on having a description that
contains "SHA384" or "SHA-384").
Rename identifiers containing double-underscore (`__`) to avoid `__`.
The reason to avoid double-underscore is that all identifiers
containing double-underscore are reserved in C++. Rename all such
identifiers that appear in any public header, including ssl_internal.h
which is in principle private but in practice is installed with the
public headers.
This commit makes check-names.sh pass.
```
perl -i -pe 's/\bMBEDTLS_SSL__ECP_RESTARTABLE\b/MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED/g; s/\bMBEDTLS_KEY_EXCHANGE_(_\w+)_(_\w+)\b/MBEDTLS_KEY_EXCHANGE${1}${2}/g' include/mbedtls/*.h library/*.c programs/*/*.c scripts/data_files/rename-1.3-2.0.txt tests/suites/*.function
```
Merge `unremove-non-crypto` into `mbedtls/development`. The branch
`unremove-non-crypto` was obtained by starting from `mbed-crypto/development`,
then reverting many commits that removed X.509 and TLS functionality when Mbed
Crypto forked from Mbed TLS (the “unremoval”), then make a few tweaks to
facilitate the merge.
The unremoval step restored old versions of some tls files. If a file doesn't
exist in mbed-crypto, check out the mbedtls version, regardless of what
happened during the unremoval of tls files in the crypto tree. Also
unconditionally take the mbedtls version of a few files where the
modifications are completely project-specific and are not relevant in
mbed-crypto:
* `.github/issue_template.md`: completely different. We may want to reconcile
them independently as a follow-up.
* `.travis.yml`: would only be reverted to an earlier tls version.
* `README.md`: completely different. We may want to reconcile them
independently as a follow-up.
* `doxygen/input/doc_mainpage.h`: the changes in crypto were minimal and not
relevant except as a stopgap as mbed-crypto did not have its own product
versioning in the Doxygen documentation.
* `tests/.jenkins/Jenkinsfile`: completely different.
* `tests/data_files/Makefile`: there were no changes in mbed-crypto,
but the unremoval step restored an old version.
Shell script for everything to do after the merge apart from the conflict
resolution:
```
tls_files=($(comm -23 <(git ls-tree -r --name-only HEAD) <(git ls-tree -r --name-only $(git merge-base upstream-crypto/development MERGE_HEAD))))
tls_files+=($tls_files .github/issue_template.md .travis.yml README.md doxygen/input/doc_mainpage.h tests/.jenkins/Jenkinsfile tests/data_files/Makefile)
git checkout --theirs HEAD -- $tls_files
git add -- $tls_files
```
Resolve the remaining conflicts:
* `library/CMakeLists.txt`:
* Keep the TLS definition of `src_crypto`
* `USE_SHARED_MBEDTLS_LIBRARY`: keep all three libraries, with both
`include` and `crypto/include` in `target_include_directories`, all with
version `2.21.0`.
* `programs/Makefile`:
* Reconcile the APPS lists (add/add from a differently-formatted common
ancestor): insert the `psa/*` from crypto into the tls list.
* Keep the `fuzz` target defined only in tls version.
* Keep the recipe (only in tls version) cleaning `ssl_pthread_server`
stuff for the `clean` target.
* `scripts/config.py`:
* `include_in_full`: add/add conflict. Keep both.
* `tests/scripts/all.sh`:
* `component_test_no_use_psa_crypto_full_cmake_asan`: partially old
version in crypto. Take the tls version.
* `component_test_malloc_0_null` and more: take
`component_test_malloc_0_null` from crypto (with `config.py` rather than
`config.pl`, and with `$ASAN_FLAGS` rather than an explicit list), but
add the call to `ssl-opt.sh` from tls. Take the other components from
crypto.
With this commit, building and running the unit tests with both `make ` and
`cmake` work in the default configuration on Linux. Other platforms, build
systems and configurations are likely not to work, and there is some
regression in test coverage.
There is some loss of functionality because the unremoval step restored older
versions of tls content. This commit contains the latest tls version of
tls-only files, but some changes from the tls side in files that existed on
both sides have regressed. Most problematic changes are hunks that remove some
tls-specific feature and contain either a C preprocessor symbol identifying a
tls-specific module or option, or the name of a tls-specific file. Hunks
that remove a tls-specific preprocessor symbol can be identified with the
regular expression `^-.*MBEDTLS_(ERR_)?(PKCS11|X509|NET|SSL)_`.
Subsequent commits will revert a few parts of the patch from this merge commit
in order to restore the tls functionality that it removes, ensure that the
test coverage includes what was covered in either branch, and fix test
failures.
This reverts commit 9afb2e9921.
Conflicts:
* include/CMakeLists.txt
* "Make config.h available" comment: there has been a change
adjacent to where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* compat.sh: there has been a change immediately before where it was
removed. Just re-add what was removed.
Counting of the fragments has been shifted from the writing section to
the reading. This is more reliable because one reading is made for one
fragment and during one write the library can internally divide data
into two fragments
Signed-off-by: Piotr Nowicki <piotr.nowicki@arm.com>
Initialize variables to NULL before doing any operations that might fail.
This fixes a case where the allocation fails on the first context, which
previously made the code free the second, uninitialized context.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Add a conditional buffer resizing feature. Introduce tests exercising
it in various setups (serialization, renegotiation, mfl manipulations).
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Adds an additional boundary check to the test parameter bytes_arg in
generate_random() in test_suite_psa_crypto.function.
This is to check against a possible underflow, and to avoid a warning,
"argument ... exceeds maximum object size", (-Werror=alloc-size-larger-than)
that GCC 7 generates.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Exercise the feature alone, with record splitting and DTLS connection ID.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Signed-off-by: Darryl Green <darryl.green@arm.com>
For this test it is good to have a handshake messages length as big as
possible, so for the server the certificate verification mode is
changed from default NONE to REQUIRED. It requires the client to send
certificate date to the server during handshake
Signed-off-by: Piotr Nowicki <piotr.nowicki@arm.com>
Create and provide a structure with default options so that the caller won't have
to pass all of the parameters each time the handshake is called. In the future
this can be improved so that the options are passed as a string, just like in
ssl-opt.sh.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
(Only the top-level ones, ie, for each call to eg asn1_get_mpi(), ensure
there's at least one test case that makes this call fail in one way, but don't
test the various ways to make asn1_get_mpi fail - that should be covered
elsewhere.)
- the new checks added by the previous commits needed exercising
- existing tests sometimes had wrong descriptions or where passing for the
wrong reason (eg with the "length mismatch" test, the function actually
failed before reaching the length check)
- while at it, add tests for the rest as well
The valid minimal-size key was generated with:
openssl genrsa 128 2>/dev/null | openssl rsa -outform der 2>/dev/null | xxd -p
Files deleted by us: keep them deleted.
```
git rm $(git status -s | sed -n 's/^DU //p')
```
Individual files with conflicts:
* `README.md`: keep the crypto version.
* `doxygen/input/doc_mainpage.h`: keep the crypto version (with an obsolete Mbed Crypto version number).
* `include/mbedtls/error.h`:
* `ERROR`: similar additions made through parallel commits, with only whitespace differences. Align with the tls version.
* `library/CMakeLists.txt`: keep the crypto version.
* `library/Makefile`: keep the crypto version.
* `scripts/generate_errors.pl`: keep the crypto version (the relevant changes were made through parallel commits).
* `tests/scripts/check-test-cases.py`:
* `Results`: keep the crypto version, which has both the new argument to the constructor (added in crypto only) and the class docstring (added through parallel commits).
* `tests/suites/helpers.function`:
* `ARRAY_LENGTH`, `ASSERT_ALLOC`: additions in the same location. Keep both, in indifferent order.
* `tests/suites/target_test.function`:
* `receive_uint32`: keep the crypto version which has an additional bug fix. The tls changes made in tls are irrelevant after this bug fix.
* `visualc/VS2010/mbedTLS.vcxproj`: run `scripts/generate_visualc_files.pl`.
Review of non-conflicting changes:
* `all.sh`: 1 change.
* zlib test components: don't add them.
* `include/CMakeLists.txt`: 1 change.
* `target_include_directories`: doesn't work as is (different target name). Don't take the change.
* All other non-conflicting changes: take them.
Let the caller decide what certificates and keys are loaded (EC/RSA)
instead of loading both for the server, and an unspecified one
for the client. Use only DER encoding.
Change the encoding of key types, EC curve families and DH group
families to make the low-order bit a parity bit (with even parity).
This ensures that distinct key type values always have a Hamming
distance of at least 2, which makes it easier for implementations to
resist single bit flips.
All key types now have an encoding on 32 bits where the bottom 16 bits
are zero. Change to using 16 bits only.
Keep 32 bits for key types in storage, but move the significant
half-word from the top to the bottom.
Likewise, change EC curve and DH group families from 32 bits out of
which the top 8 and bottom 16 bits are zero, to 8 bits only.
Reorder psa_core_key_attributes_t to avoid padding.
Remove the values of curve encodings that are based on the TLS registry
and include the curve size, keeping only the new encoding that merely
encodes a curve family in 8 bits.
Keep the old constant names as aliases for the new values and
deprecate the old names.
