mirror of
https://github.com/ttrftech/NanoVNA.git
synced 2026-01-20 15:20:19 +01:00
b7934745ca
Decrease sweep thread stack size from 640 to 512 (also stack usage code optimization give good result) Little change 16x22 font ui.c Use definition for some hard coded values Fix button "Correction" not reset after use "reset" Define menu button and input num size #define MENU_BUTTON_WIDTH 60 #define MENU_BUTTON_HEIGHT 30 #define NUM_INPUT_HEIGHT 30 Reduce button height from 32 to 30 pixels (fix in stimulus menu "<back" button overwrite by input num field) Little code change
238 lines
6.5 KiB
Makefile
238 lines
6.5 KiB
Makefile
##############################################################################
|
|
# Build global options
|
|
# NOTE: Can be overridden externally.
|
|
#
|
|
|
|
# Compiler options here.
|
|
ifeq ($(USE_OPT),)
|
|
USE_OPT = -O2 -fno-inline-small-functions -ggdb -fomit-frame-pointer -falign-functions=16 --specs=nano.specs -fstack-usage
|
|
endif
|
|
|
|
# C specific options here (added to USE_OPT).
|
|
ifeq ($(USE_COPT),)
|
|
USE_COPT =
|
|
endif
|
|
|
|
# C++ specific options here (added to USE_OPT).
|
|
ifeq ($(USE_CPPOPT),)
|
|
USE_CPPOPT = -fno-rtti
|
|
endif
|
|
|
|
# Enable this if you want the linker to remove unused code and data
|
|
ifeq ($(USE_LINK_GC),)
|
|
USE_LINK_GC = yes
|
|
endif
|
|
|
|
# Linker extra options here.
|
|
ifeq ($(USE_LDOPT),)
|
|
USE_LDOPT =
|
|
endif
|
|
|
|
# Enable this if you want link time optimizations (LTO)
|
|
ifeq ($(USE_LTO),)
|
|
USE_LTO = no
|
|
endif
|
|
|
|
# If enabled, this option allows to compile the application in THUMB mode.
|
|
ifeq ($(USE_THUMB),)
|
|
USE_THUMB = yes
|
|
endif
|
|
|
|
# Enable this if you want to see the full log while compiling.
|
|
ifeq ($(USE_VERBOSE_COMPILE),)
|
|
USE_VERBOSE_COMPILE = no
|
|
endif
|
|
|
|
# If enabled, this option makes the build process faster by not compiling
|
|
# modules not used in the current configuration.
|
|
ifeq ($(USE_SMART_BUILD),)
|
|
USE_SMART_BUILD = yes
|
|
endif
|
|
|
|
#
|
|
# Build global options
|
|
##############################################################################
|
|
|
|
ifeq ($(VERSION),)
|
|
VERSION="$(shell git describe --tags)"
|
|
endif
|
|
|
|
##############################################################################
|
|
# Architecture or project specific options
|
|
#
|
|
|
|
# Stack size to be allocated to the Cortex-M process stack. This stack is
|
|
# the stack used by the main() thread.
|
|
ifeq ($(USE_PROCESS_STACKSIZE),)
|
|
USE_PROCESS_STACKSIZE = 0x200
|
|
endif
|
|
|
|
# Stack size to the allocated to the Cortex-M main/exceptions stack. This
|
|
# stack is used for processing interrupts and exceptions.
|
|
ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
|
|
USE_EXCEPTIONS_STACKSIZE = 0x200
|
|
endif
|
|
|
|
#
|
|
# Architecture or project specific options
|
|
##############################################################################
|
|
|
|
##############################################################################
|
|
# Project, sources and paths
|
|
#
|
|
|
|
# Define project name here
|
|
PROJECT = ch
|
|
|
|
# Imported source files and paths
|
|
#CHIBIOS = ../ChibiOS-RT
|
|
CHIBIOS = ChibiOS
|
|
PROJ = .
|
|
# Startup files.
|
|
include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
|
|
# HAL-OSAL files (optional).
|
|
include $(CHIBIOS)/os/hal/hal.mk
|
|
include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
|
|
#include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
|
|
include NANOVNA_STM32_F072/board.mk
|
|
include $(CHIBIOS)/os/hal/osal/rt/osal.mk
|
|
# RTOS files (optional).
|
|
include $(CHIBIOS)/os/rt/rt.mk
|
|
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
|
|
# Other files (optional).
|
|
include $(CHIBIOS)/test/rt/test.mk
|
|
include $(CHIBIOS)/os/hal/lib/streams/streams.mk
|
|
include $(CHIBIOS)/os/various/shell/shell.mk
|
|
|
|
# Define linker script file here
|
|
#LDSCRIPT= $(STARTUPLD)/STM32F072xB.ld
|
|
LDSCRIPT= STM32F072xB.ld
|
|
|
|
# C sources that can be compiled in ARM or THUMB mode depending on the global
|
|
# setting.
|
|
CSRC = $(STARTUPSRC) \
|
|
$(KERNSRC) \
|
|
$(PORTSRC) \
|
|
$(OSALSRC) \
|
|
$(HALSRC) \
|
|
$(PLATFORMSRC) \
|
|
$(BOARDSRC) \
|
|
$(STREAMSSRC) \
|
|
$(SHELLSRC) \
|
|
usbcfg.c \
|
|
main.c si5351.c tlv320aic3204.c dsp.c plot.c ui.c ili9341.c numfont20x22.c Font5x7.c flash.c adc.c
|
|
|
|
# $(TESTSRC) \
|
|
|
|
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
|
|
# setting.
|
|
CPPSRC =
|
|
|
|
# C sources to be compiled in ARM mode regardless of the global setting.
|
|
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
|
|
# option that results in lower performance and larger code size.
|
|
ACSRC =
|
|
|
|
# C++ sources to be compiled in ARM mode regardless of the global setting.
|
|
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
|
|
# option that results in lower performance and larger code size.
|
|
ACPPSRC =
|
|
|
|
# C sources to be compiled in THUMB mode regardless of the global setting.
|
|
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
|
|
# option that results in lower performance and larger code size.
|
|
TCSRC =
|
|
|
|
# C sources to be compiled in THUMB mode regardless of the global setting.
|
|
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
|
|
# option that results in lower performance and larger code size.
|
|
TCPPSRC =
|
|
|
|
# List ASM source files here
|
|
ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
|
|
|
|
INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
|
|
$(HALINC) $(PLATFORMINC) $(BOARDINC) \
|
|
$(STREAMSINC) $(SHELLINC)
|
|
# $(TESTINC)
|
|
|
|
#
|
|
# Project, sources and paths
|
|
##############################################################################
|
|
|
|
##############################################################################
|
|
# Compiler settings
|
|
#
|
|
|
|
MCU = cortex-m0
|
|
|
|
#TRGT = arm-elf-
|
|
TRGT = arm-none-eabi-
|
|
CC = $(TRGT)gcc
|
|
CPPC = $(TRGT)g++
|
|
# Enable loading with g++ only if you need C++ runtime support.
|
|
# NOTE: You can use C++ even without C++ support if you are careful. C++
|
|
# runtime support makes code size explode.
|
|
LD = $(TRGT)gcc
|
|
#LD = $(TRGT)g++
|
|
CP = $(TRGT)objcopy
|
|
AS = $(TRGT)gcc -x assembler-with-cpp
|
|
AR = $(TRGT)ar
|
|
OD = $(TRGT)objdump
|
|
SZ = $(TRGT)size
|
|
HEX = $(CP) -O ihex
|
|
BIN = $(CP) -O binary
|
|
|
|
# ARM-specific options here
|
|
AOPT =
|
|
|
|
# THUMB-specific options here
|
|
TOPT = -mthumb -DTHUMB
|
|
|
|
# Define C warning options here
|
|
CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
|
|
|
|
# Define C++ warning options here
|
|
CPPWARN = -Wall -Wextra -Wundef
|
|
|
|
#
|
|
# Compiler settings
|
|
##############################################################################
|
|
|
|
##############################################################################
|
|
# Start of user section
|
|
#
|
|
|
|
# List all user C define here, like -D_DEBUG=1
|
|
UDEFS = -DSHELL_CMD_TEST_ENABLED=FALSE -DSHELL_CMD_MEM_ENABLED=FALSE -DARM_MATH_CM0 -DVERSION=\"$(VERSION)\"
|
|
|
|
# Define ASM defines here
|
|
UADEFS =
|
|
|
|
# List all user directories here
|
|
UINCDIR =
|
|
|
|
# List the user directory to look for the libraries here
|
|
ULIBDIR =
|
|
|
|
# List all user libraries here
|
|
ULIBS = -lm
|
|
|
|
#
|
|
# End of user defines
|
|
##############################################################################
|
|
|
|
RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC
|
|
include $(RULESPATH)/rules.mk
|
|
|
|
flash: build/ch.bin
|
|
dfu-util -d 0483:df11 -a 0 -s 0x08000000:leave -D build/ch.bin
|
|
|
|
dfu:
|
|
-@printf "reset dfu\r" >/dev/cu.usbmodem401
|
|
|
|
TAGS: Makefile
|
|
@etags *.[ch] NANOVNA_STM32_F072/*.[ch] $(shell find ChibiOS/os/hal/ports/STM32/STM32F0xx ChibiOS/os -name \*.\[ch\] -print)
|
|
@ls -l TAGS
|
|
|