Added Autoscale feature

This enable to quick find, center, and expand the current trace up to 7 of the 8 display divisions.

nanovna.h

@@ -287,6 +287,7 @@ void request_to_draw_cells_behind_menu(void);
 void request_to_draw_cells_behind_numeric_input(void);
 void redraw_marker(int marker, int update_info);
 void plot_into_index(float measured[2][POINTS_COUNT][2]);
+void get_trace_autoscale(int t, float *scale, float *refpos, const float array[101][2]);
 void force_set_markmap(void);
 void draw_frequencies(void);
 void draw_all(bool flush);

plot.c

@@ -436,7 +436,7 @@ groupdelay(const float *v, const float *w, float deltaf)
 static float
 linear(const float *v)
 {
-  return - sqrtf(v[0]*v[0] + v[1]*v[1]);
+  return sqrtf(v[0]*v[0] + v[1]*v[1]);
 }
 
 /*
@@ -451,6 +451,16 @@ swr(const float *v)
   return (1 + x)/(1 - x);
 }
 
+float real(const float *v)
+{
+  return v[0];
+}
+
+float imag(const float *v)
+{
+  return v[1];
+}
+
 static float
 resitance(const float *v) {
   float z0 = 50;
@@ -550,13 +560,111 @@ trace_into_index(int t, int i, float array[POINTS_COUNT][2])
     goto set_index;
   }
   if (v < 0) v = 0;
-  if (v > NGRIDY) v = NGRIDY;
+  if (v > 8) v = 8;
   x = (i * (WIDTH) + (sweep_points-1)/2) / (sweep_points-1) + CELLOFFSETX;
   y = floatToInt(v * GRIDY);
 set_index:
   return INDEX(x, y);
 }
 
+
+/** find minimum-max range of the data array using a specific function to evaluate the single point
+ *  @param array[in] is the data array
+ *  @param fmetric[in] is the function to be used for point evaluation
+ *  @param min[out] is te minimum found value
+ *  @param max[out] is the maximum found value
+ */
+
+static void find_min_max(const float array[101][2], float(*const fmetric)(const float *), float *min, float *max)
+{
+    float v, m, M;
+    m = M = fmetric(array[0]);
+    for (int i = 1; i<101; i++) {
+      v = fmetric(array[i]);
+      if (v > M)
+        M = v;
+      else if (v < m)
+        m = v;
+    }
+    *min = m;
+    *max = M;
+}
+
+/** Get the autoscale values for the given trace
+ * @param t[in] the trace to be autoscaled
+ * @param scale[inout] the scale value to be calculated (initialized with the current value)
+ * @param refpos[inout] the reference position to be calculated (initialized with the current value)
+ * @param array[in] data point set
+ */
+
+void
+get_trace_autoscale(int t, float *scale, float *refpos, const float array[101][2])
+{
+  float min, max, sc = *scale, rp = *refpos;
+  switch (trace[t].type) {
+  case TRC_LOGMAG:
+    find_min_max(array, logmag, &min, &max);
+    sc = (max-min)/7;
+    if (sc < 1) sc = ceil(sc*10)/10;
+    else if (sc < 10) sc = ceil(sc);
+    else sc = ceil(sc/10)*10;
+    rp = 4 - (min+max) / 2 / sc;
+    break;
+  case TRC_PHASE:
+    find_min_max(array, phase, &min, &max);
+    sc = (max-min)/7;
+    if (sc < 10) sc = ceil(sc);
+    else sc = ceil(sc/5)*5;
+    rp = 4 - (min+max) / 2 / sc;
+    break;
+  case TRC_DELAY:
+  case TRC_LINEAR:
+    find_min_max(array, linear, &min, &max);
+    sc = (max-min)/7;
+    if (sc < 1e-12) sc = 1e-12;
+    rp = 4 - (min+max) / 2 / sc;
+    break;
+  case TRC_SWR:
+    find_min_max(array, swr, &min, &max);
+    sc = (max-min)/7;
+    if (sc < 1e-12) sc = 1e-12;
+    else if (sc > 30) sc = 30;
+    rp = 4 - (min+max) / 2 / sc;
+    break;
+  case TRC_REAL:
+    find_min_max(array, real, &min, &max);
+    sc = (max-min)/7;
+    if (sc < 1e-12) sc = 1e-12;
+    rp = 4 - (min+max) / 2 / sc;
+    break;
+  case TRC_IMAG:
+    find_min_max(array, imag, &min, &max);
+    sc = (max-min)/7;
+    if (sc < 1e-12) sc = 1e-12;
+    rp = 4 - (min+max) / 2 / sc;
+    break;
+  case TRC_R:
+    find_min_max(array, resitance, &min, &max);
+    sc = (max-min)/7;
+    if (sc < 1e-12) sc = 1e-12;
+    rp = 4 - (min+max) / 2 / sc;
+    break;
+  case TRC_X:
+    find_min_max(array, reactance, &min, &max);
+    sc = (max-min)/7;
+    if (sc < 1e-12) sc = 1e-12;
+    rp = 4 - (min+max) / 2 / sc;
+    break;
+  case TRC_SMITH:
+  //case TRC_ADMIT:
+  case TRC_POLAR:
+    break;
+  }
+  *scale = sc;
+  *refpos = rp;
+  return;
+}
+
 static void
 format_smith_value(char *buf, int len, const float coeff[2], uint32_t frequency)
 {

ui.c

@@ -119,6 +119,7 @@ static void leave_ui_mode(void);
 static void erase_menu_buttons(void);
 static void ui_process_keypad(void);
 static void ui_process_numeric(void);
+static void ui_process_autoscale(void);
 
 static void menu_move_back(void);
 static void menu_push_submenu(const menuitem_t *submenu);
@@ -660,7 +661,9 @@ menu_scale_cb(int item, uint8_t data)
   if (data == KM_SCALE && trace[uistat.current_trace].type == TRC_DELAY) {
     data = KM_SCALEDELAY;
   }
-  if (btn_wait_release() & EVT_BUTTON_DOWN_LONG) {
+  if (item == 3){
+    ui_process_autoscale();
+  } else if (btn_wait_release() & EVT_BUTTON_DOWN_LONG) {
     ui_mode_numeric(data);
     ui_process_numeric();
   } else {
@@ -908,6 +911,7 @@ const menuitem_t menu_scale[] = {
   { MT_CALLBACK, KM_SCALE, "SCALE/DIV", menu_scale_cb },
   { MT_CALLBACK, KM_REFPOS, "\2REFERENCE\0POSITION", menu_scale_cb },
   { MT_CALLBACK, KM_EDELAY, "\2ELECTRICAL\0DELAY", menu_scale_cb },
+  { MT_CALLBACK, 0, "AUTO", menu_scale_cb },
   { MT_CANCEL, 0, S_LARROW" BACK", NULL },
   { MT_NONE, 0, NULL, NULL } // sentinel
 };
@@ -1947,6 +1951,17 @@ numeric_apply_touch(void)
   return;
 }
 
+static void
+ui_process_autoscale(void)
+{
+  float refpos = get_trace_refpos(uistat.current_trace);
+  float scale = get_trace_scale(uistat.current_trace);
+  get_trace_autoscale(uistat.current_trace, &scale, &refpos, measured[trace[uistat.current_trace].channel]);
+  set_trace_refpos(uistat.current_trace, refpos);
+  set_trace_scale(uistat.current_trace, scale);
+  ui_mode_normal();
+}
+
 static void
 ui_process_numeric(void)
 {