Create thescript.py

thescript.py

@@ -0,0 +1,86 @@
+#!/usr/bin/env python
+
+import csv
+import json
+from netmiko import Netmiko
+from jinja2 import Environment, FileSystemLoader
+ENV = Environment(loader=FileSystemLoader('.'))
+template = ENV.get_template("template.j2")
+username = "networkchuck"
+password = "Password123!"
+
+site = input("Which site are you configuring?: ")
+
+thecsvsitefile = "sites.csv"
+thejsonsitefile = "sites_" + site + ".json"
+sitedata = {}
+with open(thecsvsitefile) as csvFile:
+    csvReader = csv.DictReader(csvFile)
+    for rows in csvReader:
+        id = rows['Site_Name']
+        sitedata[id] = rows
+
+with open(thejsonsitefile, 'w') as jsonFile:
+    jsonFile.write(json.dumps(sitedata, indent=4))
+
+with open(thejsonsitefile) as f:
+    jsondata = f.read()
+json_dict = json.loads(jsondata)
+sitenumber = json_dict[site]["Site Number"]
+
+
+router_vlan7 = "10." + sitenumber + ".1.1 255.255.255.0"
+router_vlan9 = "10." + sitenumber + ".2.1 255.255.255.0"
+router_vlan999 = "10.99." + sitenumber + ".1 255.255.255.0"
+
+switch_vlan999 = "10.99." + sitenumber + ".2 255.255.255.0"
+
+
+router = {
+    "host": json_dict[site]["Router IP"],
+    "username": username,
+    "password": password,
+    "device_type": "cisco_ios",
+}
+
+switch = {
+    "host": json_dict[site]["Switch IP"],
+    "username": username,
+    "password": password,
+    "device_type": "cisco_ios",
+}
+
+devices = [router, switch]
+
+
+
+
+
+for device in devices:
+    if device == router:
+        template = ENV.get_template("router_template.j2")
+        deviceconfig_dict = {
+            "hostname": site + "RTR01",
+            "vlan7": router_vlan7,
+            "vlan9": router_vlan9,
+            "vlan999": router_vlan999,
+        }
+        config = template.render(siteinfo=deviceconfig_dict).split('\n')
+        print("Configuring the router")
+        net_connect = Netmiko(**device)
+        output = net_connect.send_config_set(config)
+        net_connect.disconnect()
+        print("Router configuration complete")
+    else:
+        template = ENV.get_template("switch_template.j2")
+        deviceconfig_dict = {
+        "hostname": site + "SW01",
+        "vlan999": switch_vlan999,
+        }
+        config = template.render(siteinfo=deviceconfig_dict).split('\n')
+        print("Configuring the switch")
+        net_connect = Netmiko(**device)
+        output = net_connect.send_config_set(config)
+        print("Switch configuration complete")
+        net_connect.disconnect()
+