mirror of
https://github.com/richonguzman/LoRa_APRS_iGate.git
synced 2026-01-21 16:20:15 +01:00
108 lines
3.9 KiB
C++
108 lines
3.9 KiB
C++
#include <WiFi.h>
|
|
#include "configuration.h"
|
|
#include "pins_config.h"
|
|
#include "wifi_utils.h"
|
|
#include "display.h"
|
|
|
|
extern Configuration Config;
|
|
extern WiFi_AP *currentWiFi;
|
|
extern int myWiFiAPIndex;
|
|
extern int myWiFiAPSize;
|
|
extern int stationMode;
|
|
extern uint32_t previousWiFiMillis;
|
|
|
|
namespace WIFI_Utils {
|
|
|
|
void checkWiFi() {
|
|
if ((WiFi.status() != WL_CONNECTED) && ((millis() - previousWiFiMillis) >= 30*1000)) {
|
|
Serial.print(millis());
|
|
Serial.println("Reconnecting to WiFi...");
|
|
WiFi.disconnect();
|
|
WiFi.reconnect();
|
|
previousWiFiMillis = millis();
|
|
}
|
|
}
|
|
|
|
void startWiFi() {
|
|
int wifiCounter = 0;
|
|
if (stationMode!=6) {
|
|
WiFi.mode(WIFI_STA);
|
|
WiFi.disconnect();
|
|
delay(500);
|
|
}
|
|
unsigned long start = millis();
|
|
show_display("", "", "Connecting to Wifi:", "", currentWiFi->ssid + " ...", 0);
|
|
Serial.print("\nConnecting to WiFi '"); Serial.print(currentWiFi->ssid); Serial.println("' ...");
|
|
WiFi.begin(currentWiFi->ssid.c_str(), currentWiFi->password.c_str());
|
|
while (WiFi.status() != WL_CONNECTED && wifiCounter<2) {
|
|
delay(500);
|
|
#if defined(TTGO_T_LORA_V2_1) || defined(HELTEC_V2) || defined(HELTEC_V3) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa)
|
|
digitalWrite(internalLedPin,HIGH);
|
|
#endif
|
|
Serial.print('.');
|
|
delay(500);
|
|
#if defined(TTGO_T_LORA_V2_1) || defined(HELTEC_V2) || defined(HELTEC_V3) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa)
|
|
digitalWrite(internalLedPin,LOW);
|
|
#endif
|
|
if ((millis() - start) > 10000){
|
|
delay(1000);
|
|
if(myWiFiAPIndex >= (myWiFiAPSize-1)) {
|
|
myWiFiAPIndex = 0;
|
|
if (stationMode==5 || stationMode==6) {
|
|
wifiCounter++;
|
|
}
|
|
} else {
|
|
myWiFiAPIndex++;
|
|
}
|
|
currentWiFi = &Config.wifiAPs[myWiFiAPIndex];
|
|
start = millis();
|
|
Serial.print("\nConnecting to WiFi '"); Serial.print(currentWiFi->ssid); Serial.println("' ...");
|
|
show_display("", "", "Connecting to Wifi:", "", currentWiFi->ssid + " ...", 0);
|
|
WiFi.disconnect();
|
|
WiFi.begin(currentWiFi->ssid.c_str(), currentWiFi->password.c_str());
|
|
}
|
|
}
|
|
#if defined(TTGO_T_LORA_V2_1) || defined(HELTEC_V2) || defined(HELTEC_V3) || defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa)
|
|
digitalWrite(internalLedPin,LOW);
|
|
#endif
|
|
if (WiFi.status() == WL_CONNECTED) {
|
|
Serial.print("Connected as ");
|
|
Serial.println(WiFi.localIP());
|
|
show_display("", "", " Connected!!", "" , " loading ...", 1000);
|
|
} else if (WiFi.status() != WL_CONNECTED && stationMode==5) {
|
|
Serial.println("\nNot connected to WiFi! (DigiRepeater Mode)");
|
|
show_display("", "", " WiFi Not Connected!", " DigiRepeater MODE" , " loading ...", 2000);
|
|
}
|
|
}
|
|
|
|
void setup() {
|
|
if (stationMode==1 || stationMode==2) {
|
|
if (stationMode==1) {
|
|
Serial.println("stationMode ---> iGate (only Rx)");
|
|
} else {
|
|
Serial.println("stationMode ---> iGate (Rx + Tx)");
|
|
}
|
|
startWiFi();
|
|
btStop();
|
|
} else if (stationMode==3 || stationMode==4) {
|
|
if (stationMode==3) {
|
|
Serial.println("stationMode ---> DigiRepeater (Rx freq == Tx freq)");
|
|
} else {
|
|
Serial.println("stationMode ---> DigiRepeater (Rx freq != Tx freq)");
|
|
}
|
|
WiFi.mode(WIFI_OFF);
|
|
btStop();
|
|
} else if (stationMode==5) {
|
|
Serial.println("stationMode ---> iGate when Wifi/APRS available (DigiRepeater when not)");
|
|
} else if (stationMode==6) {
|
|
Serial.println("stationMode ---> Digirepeater with iGate capabilities (when WiFi available)");
|
|
WiFi.mode(WIFI_STA);
|
|
WiFi.disconnect();
|
|
} else {
|
|
Serial.println("stationMode ---> NOT VALID, check '/data/igate_conf.json'");
|
|
show_display("------- ERROR -------", "stationMode Not Valid", "change it on : /data/", "igate_conf.json", 0);
|
|
while (1);
|
|
}
|
|
}
|
|
|
|
} |