richonguzman/LoRa_APRS_iGate
1
0
Fork 0
mirror of https://github.com/richonguzman/LoRa_APRS_iGate.git synced 2026-01-22 08:40:16 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity
LoRa_APRS_iGate/src/battery_utils.cpp
richonguzman 06ef37e4dc eliminando espacios en blanco
2024-11-06 12:47:42 -03:00

266 lines
10 KiB
C++
Raw Blame History

#include <Arduino.h>
#include "battery_utils.h"
#include "configuration.h"
#include "board_pinout.h"
#include "power_utils.h"
#include "utils.h"
extern Configuration Config;
extern uint32_t lastBatteryCheck;
bool shouldSleepLowVoltage = false;
float adcReadingTransformation = (3.3/4095);
float voltageDividerCorrection = 0.288;
float readingCorrection = 0.125;
float multiplyCorrection = 0.035;
float voltageDividerTransformation = 0.0;
int telemetryCounter = random(1,999);
#ifdef HAS_ADC_CALIBRATION
#include <esp_adc_cal.h>
#if defined(TTGO_LORA32_V2_1) || defined(TTGO_LORA32_V2_1_915)
#define InternalBattery_ADC_Channel ADC1_CHANNEL_7 // t_lora32 pin35
#define ExternalVoltage_ADC_Channel ADC1_CHANNEL_6 // t_lora32 pin34
#endif
#if CONFIG_IDF_TARGET_ESP32
#define ADC_EXAMPLE_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_VREF
#elif CONFIG_IDF_TARGET_ESP32S2
#define ADC_EXAMPLE_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_TP
#elif CONFIG_IDF_TARGET_ESP32C3
#define ADC_EXAMPLE_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_TP
#elif CONFIG_IDF_TARGET_ESP32S3
#define ADC_EXAMPLE_CALI_SCHEME ESP_ADC_CAL_VAL_EFUSE_TP_FIT
#endif
esp_adc_cal_characteristics_t adc_chars;
#endif
bool calibrationEnable = false;
namespace BATTERY_Utils {
float mapVoltage(float voltage, float in_min, float in_max, float out_min, float out_max) {
return (voltage - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
}
void adcCalibration() {
#ifdef HAS_ADC_CALIBRATION
if (calibrationEnable) {
adc1_config_width(ADC_WIDTH_BIT_12);
adc1_config_channel_atten(InternalBattery_ADC_Channel, ADC_ATTEN_DB_12);
adc1_config_channel_atten(ExternalVoltage_ADC_Channel, ADC_ATTEN_DB_12);
}
#endif
}
void adcCalibrationCheck() {
#ifdef HAS_ADC_CALIBRATION
esp_err_t ret;
ret = esp_adc_cal_check_efuse(ADC_EXAMPLE_CALI_SCHEME);
/*if (ret == ESP_ERR_NOT_SUPPORTED) {
Serial.println("Calibration scheme not supported, skip software calibration");
} else if (ret == ESP_ERR_INVALID_VERSION) {
Serial.println("eFuse not burnt, skip software calibration");
} else */
if (ret == ESP_OK) {
esp_adc_cal_characterize(ADC_UNIT_1, ADC_ATTEN_DB_12, ADC_WIDTH_BIT_12, 1100, &adc_chars);
//Serial.printf("eFuse Vref:%u mV\n", adc_chars.vref);
calibrationEnable = true;
} /*else {
Serial.println("Invalid Calibration Arg");
}*/
#endif
}
void setup() {
if ((Config.battery.sendExternalVoltage || Config.battery.monitorExternalVoltage) && Config.battery.voltageDividerR2 != 0) voltageDividerTransformation = (Config.battery.voltageDividerR1 + Config.battery.voltageDividerR2) / Config.battery.voltageDividerR2;
#if defined(HAS_ADC_CALIBRATION)
if (Config.battery.sendInternalVoltage || Config.battery.monitorInternalVoltage || Config.battery.sendExternalVoltage || Config.battery.monitorExternalVoltage) {
adcCalibrationCheck();
adcCalibration();
}
#endif
}
float checkInternalVoltage() {
#if defined(HAS_AXP192) || defined(HAS_AXP2101)
if(POWER_Utils::isBatteryConnected()) {
return POWER_Utils::getBatteryVoltage();
} else {
return 0.0;
}
#else
int sample;
int sampleSum = 0;
#ifdef ADC_CTRL
#if defined(HELTEC_WIRELESS_TRACKER)
digitalWrite(ADC_CTRL, HIGH);
#endif
#if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP)
digitalWrite(ADC_CTRL, LOW);
#endif
#endif
for (int i = 0; i < 100; i++) {
#if defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_LoRa_915) || defined(ESP32_DIY_1W_LoRa) || defined(ESP32_DIY_1W_LoRa_915)
sample = 0;
#else
#ifdef HAS_ADC_CALIBRATION
if (calibrationEnable){
sample = adc1_get_raw(InternalBattery_ADC_Channel);
} else {
sample = analogRead(BATTERY_PIN);
}
#else
#ifdef BATTERY_PIN
sample = analogRead(BATTERY_PIN);
#else
sample = 0;
#endif
#endif
#endif
sampleSum += sample;
delayMicroseconds(50);
}
#ifdef ADC_CTRL
#if defined(HELTEC_WIRELESS_TRACKER)
digitalWrite(ADC_CTRL, LOW);
#endif
#if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP)
digitalWrite(ADC_CTRL, HIGH);
#endif
#ifdef HELTEC_WP
double inputDivider = (1.0 / (10.0 + 10.0)) * 10.0; // The voltage divider is a 10k + 10k resistor in series
#else
double inputDivider = (1.0 / (390.0 + 100.0)) * 100.0; // The voltage divider is a 390k + 100k resistor in series, 100k on the low side.
#endif
return (((sampleSum/100) * adcReadingTransformation) / inputDivider) + 0.285; // Yes, this offset is excessive, but the ADC on the ESP32s3 is quite inaccurate and noisy. Adjust to own measurements.
#else
#ifdef HAS_ADC_CALIBRATION
if (calibrationEnable){
float voltage = esp_adc_cal_raw_to_voltage(sampleSum / 100, &adc_chars);
voltage *= 2; // for 100K/100K voltage divider
voltage /= 1000;
return voltage;
} else {
return (2 * (sampleSum/100) * adcReadingTransformation) + voltageDividerCorrection; // raw voltage without mapping
}
#else
return (2 * (sampleSum/100) * adcReadingTransformation) + voltageDividerCorrection; // raw voltage without mapping
#endif
#endif
// return mapVoltage(voltage, 3.34, 4.71, 3.0, 4.2); // mapped voltage
#endif
}
float checkExternalVoltage() {
int sample;
int sampleSum = 0;
for (int i = 0; i < 100; i++) {
#ifdef HAS_ADC_CALIBRATION
if (calibrationEnable){
sample = adc1_get_raw(ExternalVoltage_ADC_Channel);
} else {
sample = analogRead(Config.battery.externalVoltagePin);
}
#else
sample = analogRead(Config.battery.externalVoltagePin);
#endif
sampleSum += sample;
delayMicroseconds(50);
}
float extVoltage;
#ifdef HAS_ADC_CALIBRATION
if (calibrationEnable){
extVoltage = esp_adc_cal_raw_to_voltage(sampleSum / 100, &adc_chars) * voltageDividerTransformation; // in mV
extVoltage /= 1000;
} else {
extVoltage = ((((sampleSum/100)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
}
#else
extVoltage = ((((sampleSum/100)* adcReadingTransformation) + readingCorrection) * voltageDividerTransformation) - multiplyCorrection;
#endif
return extVoltage; // raw voltage without mapping
// return mapVoltage(voltage, 5.05, 6.32, 4.5, 5.5); // mapped voltage
}
void checkIfShouldSleep() {
if (lastBatteryCheck == 0 || millis() - lastBatteryCheck >= 15 * 60 * 1000) {
lastBatteryCheck = millis();
if (checkInternalVoltage() < Config.lowVoltageCutOff) {
ESP.deepSleep(1800000000); // 30 min sleep (60s = 60e6)
}
}
}
void startupBatteryHealth() {
#ifdef BATTERY_PIN
if (Config.battery.monitorInternalVoltage && checkInternalVoltage() < Config.battery.internalSleepVoltage + 0.1) {
shouldSleepLowVoltage = true;
}
#endif
#ifndef HELTEC_WP
if (Config.battery.monitorExternalVoltage && checkExternalVoltage() < Config.battery.externalSleepVoltage + 0.1) {
shouldSleepLowVoltage = true;
}
#endif
if (shouldSleepLowVoltage) {
Utils::checkSleepByLowBatteryVoltage(0);
}
}
String generateEncodedTelemetryBytes(float value, bool firstBytes, byte voltageType) { // 0 = internal battery(0-4,2V) , 1 = external battery(0-15V)
String encodedBytes;
int tempValue;
if (firstBytes) {
tempValue = value;
} else {
switch (voltageType) {
case 0:
tempValue = value * 100; // Internal voltage calculation
break;
case 1:
tempValue = (value * 100) / 2; // External voltage calculation
break;
default:
tempValue = value;
break;
}
}
int firstByte = tempValue / 91;
tempValue -= firstByte * 91;
encodedBytes = char(firstByte + 33);
encodedBytes += char(tempValue + 33);
return encodedBytes;
}
String generateEncodedTelemetry() {
String telemetry = "|";
telemetry += generateEncodedTelemetryBytes(telemetryCounter, true, 0);
telemetryCounter++;
if (telemetryCounter == 1000) {
telemetryCounter = 0;
}
if (Config.battery.sendInternalVoltage) telemetry += generateEncodedTelemetryBytes(checkInternalVoltage(), false, 0);
if (Config.battery.sendExternalVoltage) telemetry += generateEncodedTelemetryBytes(checkExternalVoltage(), false, 1);
telemetry += "|";
return telemetry;
}
}
Reference in a new issue View git blame Copy permalink