mirror of
https://github.com/richonguzman/LoRa_APRS_iGate.git
synced 2026-01-22 00:30:16 +01:00
115 lines
4.1 KiB
C++
115 lines
4.1 KiB
C++
#include <Arduino.h>
|
|
#include "battery_utils.h"
|
|
#include "configuration.h"
|
|
#include "boards_pinout.h"
|
|
#include "power_utils.h"
|
|
#include "utils.h"
|
|
|
|
extern Configuration Config;
|
|
extern uint32_t lastBatteryCheck;
|
|
|
|
bool shouldSleepLowVoltage = false;
|
|
|
|
float adcReadingTransformation = (3.3/4095);
|
|
float voltageDividerCorrection = 0.288;
|
|
|
|
// for External Voltage Measurment (MAX = 15Volts !!!)
|
|
float R1 = 100.000; //in Kilo-Ohms
|
|
float R2 = 27.000; //in Kilo-Ohms
|
|
float readingCorrection = 0.125;
|
|
float multiplyCorrection = 0.035;
|
|
|
|
|
|
namespace BATTERY_Utils {
|
|
|
|
float mapVoltage(float voltage, float in_min, float in_max, float out_min, float out_max) {
|
|
return (voltage - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
|
|
}
|
|
|
|
float checkInternalVoltage() {
|
|
#if defined(HAS_AXP192) || defined(HAS_AXP2101)
|
|
if(POWER_Utils::isBatteryConnected()) {
|
|
return POWER_Utils::getBatteryVoltage();
|
|
} else {
|
|
return 0.0;
|
|
}
|
|
#else
|
|
int sample;
|
|
int sampleSum = 0;
|
|
#ifdef ADC_CTRL
|
|
#if defined(HELTEC_WIRELESS_TRACKER)
|
|
digitalWrite(ADC_CTRL, HIGH);
|
|
#endif
|
|
#if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3)
|
|
digitalWrite(ADC_CTRL, LOW);
|
|
#endif
|
|
#endif
|
|
|
|
for (int i = 0; i < 100; i++) {
|
|
#ifdef BATTERY_PIN
|
|
sample = analogRead(BATTERY_PIN);
|
|
#endif
|
|
#if defined(ESP32_DIY_LoRa) || defined(ESP32_DIY_1W_LoRa)
|
|
sample = 0;
|
|
#endif
|
|
sampleSum += sample;
|
|
delayMicroseconds(50);
|
|
}
|
|
|
|
#ifdef ADC_CTRL
|
|
#if defined(HELTEC_WIRELESS_TRACKER)
|
|
digitalWrite(ADC_CTRL, LOW);
|
|
#endif
|
|
#if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3)
|
|
digitalWrite(ADC_CTRL, HIGH);
|
|
#endif
|
|
double inputDivider = (1.0 / (390.0 + 100.0)) * 100.0; // The voltage divider is a 390k + 100k resistor in series, 100k on the low side.
|
|
return (((sampleSum/100) * adcReadingTransformation) / inputDivider) + 0.285; // Yes, this offset is excessive, but the ADC on the ESP32s3 is quite inaccurate and noisy. Adjust to own measurements.
|
|
#else
|
|
return (2 * (sampleSum/100) * adcReadingTransformation) + voltageDividerCorrection; // raw voltage without mapping
|
|
#endif
|
|
|
|
// return mapVoltage(voltage, 3.34, 4.71, 3.0, 4.2); // mapped voltage
|
|
#endif
|
|
}
|
|
|
|
float checkExternalVoltage() {
|
|
int sample;
|
|
int sampleSum = 0;
|
|
for (int i = 0; i < 100; i++) {
|
|
sample = analogRead(Config.battery.externalVoltagePin);
|
|
sampleSum += sample;
|
|
delayMicroseconds(50);
|
|
}
|
|
|
|
float voltage = ((((sampleSum/100)* adcReadingTransformation) + readingCorrection) * ((R1+R2)/R2)) - multiplyCorrection;
|
|
|
|
return voltage; // raw voltage without mapping
|
|
|
|
// return mapVoltage(voltage, 5.05, 6.32, 4.5, 5.5); // mapped voltage
|
|
}
|
|
|
|
void checkIfShouldSleep() {
|
|
if (lastBatteryCheck == 0 || millis() - lastBatteryCheck >= 15 * 60 * 1000) {
|
|
lastBatteryCheck = millis();
|
|
if (checkInternalVoltage() < Config.lowVoltageCutOff) {
|
|
ESP.deepSleep(1800000000); // 30 min sleep (60s = 60e6)
|
|
}
|
|
}
|
|
}
|
|
|
|
void startupBatteryHealth() {
|
|
#ifdef BATTERY_PIN
|
|
if (Config.battery.monitorInternalVoltage && checkInternalVoltage() < Config.battery.internalSleepVoltage + 0.1) {
|
|
shouldSleepLowVoltage = true;
|
|
}
|
|
#endif
|
|
if (Config.battery.monitorExternalVoltage && checkExternalVoltage() < Config.battery.externalSleepVoltage + 0.1) {
|
|
shouldSleepLowVoltage = true;
|
|
}
|
|
if (shouldSleepLowVoltage) {
|
|
Utils::checkSleepByLowBatteryVoltage(0);
|
|
}
|
|
}
|
|
|
|
} |