Station
Add your ham callsign and SSID. Optionally, you can leave a comment describing your station.
Auto AP
Add your password and power off timeout to auto access point. Auto AP will start if there is no WiFi connection. Timeout will count from startup or last client disconnected.
Set to 0 if you don't want this option.
WiFi Access
Add all Wi-Fi Networks intended to be used, and their respective coordinates to georeference the iGate location.
APRS-IS
Enter you APRS-IS server and credentials.
TNC
TNC and KISS configuration
Server will be available at port 8001
Display
OLED screen configuration.
seconds
minutes
Digipeating
Define the Digipeater mode
OTA
Set your username and password to allow firmware updating over-the-air.
Telemetry
Define the telemetry
Beaconing
Set APRS beacon attributes.
minutes
Syslog
Broadcast the system log over the network.
LoRa
Config LoRa APRS Xmitting settings.
Hz
Hz
dBm
Experimental
You can test new features. Use at your own risk!
WiFi disabled. Sleep mode. Best for solar Digi with SX126X.
MCU will deep sleep when below provided battery voltage to save power. Set to 0 if you don't want this option. Please calibrate your voltage reading first!