Last 10 received packets list

Time Frame RSSI SNR
List refresh automatically every 15 seconds.
(Local Time is NTP-Time adjusted with your GMT Offset)
Station
Add your Ham callsign and SSID.

You can leave a comment describing your station.

In the bottom there is a field for personal note that can only be seen in WEB GUI.
WiFi Access
Add all Wi-Fi Networks intended to be used.
minutes
APRS-IS
Enter you APRS-IS server and credentials.
Beaconing
Set APRS beacon attributes.
minutes
Black List
Add Callsigns with space between them to Blacklist them (* wild card allowed)
Digipeating
Define the Digipeater mode
LoRa
Config LoRa APRS Xmitting settings.
Hz
Hz
dBm
Display
OLED screen configuration.
seconds
minutes
Battery
Battery Monitor & Health

Max Voltage on input pin is 3.3V.

Calculate voltage divider accordingly.
volts
volts
kOhm
kOhm
WX Telemetry
Define Wx telemetry
meters
Cยฐ
Syslog
Broadcast the system log over the network.
TNC
TNC and KISS configuration
Server will be available at port 8001
MQTT
Set your MQTT server
Default is aprs-igate
Default is 1883
Reboot Time
hours
WiFi Auto AP
Add your password and WiFi AP timeout to auto access point. Auto AP will start if there is no WiFi connection. Timeout will count from startup or last client disconnected.
Set to 0 if you don't want WiFi AP to stop.
OTA
Set your username and password to allow firmware updating over-the-air.
Admin
Set your username and password to allow access to the web interface.
Remote Management
Manage Station via APRS Messages. Leave empty to disable!
NTP
Set your GMT Time Zone.
hours
Experimental
You can test new features. Use at your own risk!
When "only" iGate Mode loses WiFi, it will change into a Digipeater Mode and after 15 min check if WiFi available and return to "only" iGate Mode.