# Richonguzman / CD2RXU LoRa APRS iGate/Digirepeater # Firmware for Tx and Rx !!! LoRa APRS iGATE/Digirepeater for: - LILYGO ESP32 LoRa32 v2-1-1.6 - ESP32 Wroom Dev + SX1278 LoRa Module for a DIY Version __________________________________________ Achievements: - Rx LoRa packets (up to 100kms away) and upload to APRS-IS servers. - Tx LoRa packets from APRS-IS feed. - iGate and Digirepeater Modes. __________________________________________ Instrucctions (add your information into the '/data/igate_conf.json'): 1.- Change "callsign" from "NOCALL-10" to your CALLSIGN + SSID. 2.- Change "wifi">"AP">"SSID" from "WiFi_AP_1" to your own WIFI-SSID-NAME. 3.- Change "wifi">"AP">"Password" from "password_WiFi_2" to your own WIFI-SSID-PASSWORD. 4.- Add GPS to "wifi">"AP">"Latitude" and "Longitude" (info from GoogleMaps) of new LoRa iGate. 5.- Change "aprs_is">"passcode" from "XYZVW" to yours (remember that is 5 digits integer). 6.- Change "stationMode" value to other than "1" ONLY(!) if you are an valid Ham Operator. __________________________________________ iGate / Digirepeater "stationMode": 1.- iGate (only Rx). 2.- iGate (Tx and Rx) HAM LICENSE REQUIRED! 3.- Digirepeater (Rx Freq = Tx Freq) HAM LICENSE REQUIRED! 4.- Digirepeater (Rx Freq != Tx Freq) HAM LICENSE REQUIRED! 5.- iGate changes to Digirepeater when it looses APRS-IS+WiFi connection (on development). __________________________________________ Versions: - 2023.02.10 First Beta (receiving LoRa Beacon/Packets and uploading to APRS-IS). - 2023.02.17 Receiving Feed from APRS-IS. - 2023.03.01 Tx Packet from APRS-IS to nearby LoRa Stations. - 2023.05.12 Tx Packet from APRS-IS to LoRa-RF Correction. - 2023.05.19 Saving Last-Heard Stations for validating Tx Responses. - 2023.05.23 Processing Query's from RF/LoRa or APRS-IS (Send "Help" Message to test). - 2023.06.06 Full repack of Code and adding _enableTx_ only for Ham Ops. - 2023.06.08 Adding Digirepeater Functions. __________________________________________ # Hope You Enjoy this, 73 !! CD2RXU , Valparaiso, Chile