From abcbe40ac24505f9d4de0300e826e206dcc33d7a Mon Sep 17 00:00:00 2001 From: richonguzman Date: Tue, 13 Jun 2023 11:21:46 -0400 Subject: [PATCH] readme update1.3 --- README.md | 53 ++++++++++------------------------------------------- 1 file changed, 10 insertions(+), 43 deletions(-) diff --git a/README.md b/README.md index 25e4cd4..95274cd 100644 --- a/README.md +++ b/README.md @@ -29,13 +29,13 @@ __________________________________________ Instructions (add your information into the '/data/igate_conf.json'): -a) Change "callsign" from "NOCALL-10" to your CALLSIGN + SSID +a) Change "callsign" from "NOCALL-10" to your CALLSIGN + SSID. -b) Choose stationmode +b) Choose *stationMode*: 1 = RX iGate, black "L" as symbol - 2 = TX iGate, red "L" as symbol, HAM only. RX will be sent to APRS-IS, Messages will be sent via Lora. Same frequency for RX and TX. By using this feature you have comply with the regulations of your country. + 2 = Rx + TX iGate, red "L" as symbol, HAM only. RX will be sent to APRS-IS, Messages will be sent via Lora. Same frequency for RX and TX. By using this feature you have comply with the regulations of your country. 3 = Digipeater simplex, green "L" as symbol, HAM only. Received packets containing WIDEx-x in path will be digipeated on the same frequency. By using this feature you have comply with the regulations of your country. @@ -43,9 +43,9 @@ b) Choose stationmode IgateComment and DigirepeaterComment will be sent to APRS-IS or via RF, depending on your stationmode -c) WiFi section, adjust SSID and Password to you WiFi, add the GPS to "Latitude" and "Longitude" (info from GoogleMaps) of your new LoRa iGate +c) WiFi section, adjust SSID and Password to you WiFi, add the GPS to "Latitude" and "Longitude" (info from GoogleMaps) of your new LoRa iGate. (if Mode 3 or 4 Selected, add also GPS info to Digirepeater Section). -d) APRS_IS section, change "passcode" from "XYZVW" to yours (remember that is 5 digits integer) and choose a server close to your location (see https://www.aprs2.net/) +d) APRS_IS section, change "passcode" from "VWXYZ" to yours (remember that is 5 digits integer) and choose a server close to your location (see https://www.aprs2.net/) e) LORA section, @@ -60,48 +60,13 @@ e) LORA section, f) section other adjust beaconInterval to a suitable value. A normal value is 45 mintes, it is recommended not to go below 30min. + __________________________________________ -LoRa APRS iGATE/Digirepeater for: +LoRa APRS iGATE/Digirepeater working on this boards: - LILYGO ESP32 LoRa32 v2-1-1.6 - ESP32 Wroom Dev + SX1278 LoRa Module for a DIY Version - -__________________________________________ - -Achievements: -- Rx LoRa packets (up to 100kms away) and upload to APRS-IS servers. -- Tx LoRa packets from APRS-IS feed. -- iGate and Digirepeater Modes. -__________________________________________ - -Instrucctions (add your information into the '/data/igate_conf.json'): - -1.- Change "callsign" from "NOCALL-10" to your CALLSIGN + SSID. - -2.- Change "wifi">"AP">"SSID" from "WiFi_AP_1" to your own WIFI-SSID-NAME. - -3.- Change "wifi">"AP">"Password" from "password_WiFi_2" to your own WIFI-SSID-PASSWORD. - -4.- Add GPS to "wifi">"AP">"Latitude" and "Longitude" (info from GoogleMaps) of new LoRa iGate. - -5.- Change "aprs_is">"passcode" from "XYZVW" to yours (remember that is 5 digits integer). - -6.- Change "stationMode" value to other than "1" ONLY(!) if you are an valid Ham Operator. - -__________________________________________ - -iGate / Digirepeater "stationMode": - -1.- iGate (only Rx). - -2.- iGate (Tx and Rx) HAM LICENSE REQUIRED! - -3.- Digirepeater (Rx Freq = Tx Freq) HAM LICENSE REQUIRED! - -4.- Digirepeater (Rx Freq != Tx Freq) HAM LICENSE REQUIRED! - -5.- iGate changes to Digirepeater when it looses APRS-IS+WiFi connection (on development). - +- HELTEC_WIFI_LORA_32_V2 (add "#define OLED_RESET 16" on "pins_config.h") __________________________________________ Versions: - 2023.02.10 First Beta (receiving LoRa Beacon/Packets and uploading to APRS-IS). @@ -112,6 +77,8 @@ Versions: - 2023.05.23 Processing Query's from RF/LoRa or APRS-IS (Send "Help" Message to test). - 2023.06.06 Full repack of Code and adding _enableTx_ only for Ham Ops. - 2023.06.08 Adding Digirepeater Functions. +- 2023.06.10 OTA for Firmware and Filesystem. +- 2023.06.12 Syslog added. __________________________________________ # Hope You Enjoy this, 73 !! CD2RXU , Valparaiso, Chile