From 5ee0dddad2f4d0a197f7e034e83d43575e310d45 Mon Sep 17 00:00:00 2001 From: richonguzman Date: Tue, 13 Jun 2023 11:32:41 -0400 Subject: [PATCH] readme update 1.4 --- README.md | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/README.md b/README.md index 1c185f2..9a9eca0 100644 --- a/README.md +++ b/README.md @@ -14,7 +14,6 @@ But under the hood is much more: - RX first, TX will only be done if there is no traffic on the frequency. - automatic update of the Lora symbol at APRS-IS, black "L" for pure RX, red "L" for TX capability and green "L" for digipeater. - support for multiple WLAN with corresponding coordinates. -- Syslog capability. and more will come: - Web-UI @@ -30,7 +29,7 @@ __________________________________________ Instructions (add your information into the '/data/igate_conf.json'): -a) Change "callsign" from "NOCALL-10" to your CALLSIGN + SSID. +a) Change _callsign_ from "NOCALL-10" to your CALLSIGN + SSID. b) Choose _stationMode_: @@ -44,11 +43,13 @@ b) Choose _stationMode_: IgateComment and DigirepeaterComment will be sent to APRS-IS or via RF, depending on your stationmode -c) WiFi section: adjust SSID and Password to you WiFi, add the GPS to "Latitude" and "Longitude" (info from GoogleMaps) of your new LoRa iGate. (If stationMode 3 or 4 selected, add also GPS info to Digirepeater Section). +c) WiFi section: + adjust SSID and Password to you WiFi, add the GPS to "Latitude" and "Longitude" (info from GoogleMaps) of your new LoRa iGate. (If stationMode 3 or 4 selected, add also GPS info to Digirepeater Section). -d) APRS_IS section, change "passcode" from "VWXYZ" to yours (remember that is 5 digits integer) and choose a server close to your location (see https://www.aprs2.net/) +d) APRS_IS section: + change "passcode" from "VWXYZ" to yours (remember that is 5 digits integer) and choose a server close to your location (see https://www.aprs2.net/) -e) LORA section, +e) LORA section: adjust TX frequency and RX frequency matching your stationmode and country. Remember,