ESP32C3 1W DIY TEST

platformio.ini

@@ -289,6 +289,22 @@ build_flags =
 	-DHAS_SX1276
 	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
 lib_deps = 
+	${common.lib_deps}
+	adafruit/Adafruit GFX Library @ 1.11.9
+	adafruit/Adafruit SSD1306 @ 2.5.10
+
+[env:esp32c3_DIY_1W_LoRa]
+extends = env:esp32
+board = esp32-c3-devkitm-1
+board_build.mcu = esp32c3
+build_flags =
+	-Werror -Wall
+	-DESP32C3_DIY_1W_LoRa
+	-DHAS_SX1268
+	-DARDUINO_USB_MODE=1
+	-DARDUINO_USB_CDC_ON_BOOT=1
+	-DELEGANTOTA_USE_ASYNC_WEBSERVER=1
+lib_deps =
 	${common.lib_deps}
 	adafruit/Adafruit GFX Library @ 1.11.9
 	adafruit/Adafruit SSD1306 @ 2.5.10

src/boards_pinout.h

@@ -133,7 +133,7 @@
     #define OLED_RST    -1
 #endif
 
-#if !defined(HELTEC_HTCT62) && !defined(HELTEC_WSL_V3)
+#if !defined(HELTEC_HTCT62) && !defined(HELTEC_WSL_V3) && !defined(ESP32C3_DIY_1W_LoRa)
         #define HAS_DISPLAY
 #endif
 
@@ -188,6 +188,18 @@
     #define RADIO_IRQ_PIN    2
 #endif
 
+#ifdef ESP32C3_DIY_1W_LoRa
+    #define RADIO_SCLK_PIN      8
+    #define RADIO_MISO_PIN      9
+    #define RADIO_MOSI_PIN      10
+    #define RADIO_CS_PIN        5
+    #define RADIO_RST_PIN       4
+    #define RADIO_DIO1_PIN      2
+    #define RADIO_BUSY_PIN      3
+    #define RADIO_RXEN          6
+    #define RADIO_TXEN          7
+#endif
+
 /* (Same pins for LILYGO LoRa32 and ESP32 Wroom Dev )
 SX1278-------------------> ESP32 ttgo-lora32-v21 and ESP32 WROOM Dev
 GND                         GND

src/display.cpp

@@ -24,7 +24,7 @@
         Adafruit_SSD1306 display(128, 64, &Wire, OLED_RST);
     #endif
 #endif
-
+    
 extern Configuration Config;
 
 String oldHeader, oldFirstLine, oldSecondLine, oldThirdLine, oldFourthLine, oldFifthLine, oldSixthLine;