LoRa_APRS_iGate/src/power_utils.cpp

#include "configuration.h"
#include "battery_utils.h"
#include "board_pinout.h"
#include "power_utils.h"

#if defined(HAS_AXP192) || defined(HAS_AXP2101)
    #ifdef TTGO_T_Beam_S3_SUPREME_V3
        #define I2C0_SDA 17
        #define I2C0_SCL 18
        #define I2C1_SDA 42
        #define I2C1_SCL 41
        #define IRQ_PIN  40
    #else
        #define I2C_SDA 21
        #define I2C_SCL 22
        #define IRQ_PIN 35
    #endif
#endif

#ifdef HAS_AXP192
    XPowersAXP192 PMU;
#endif
#ifdef HAS_AXP2101
    XPowersAXP2101 PMU;
#endif

extern Configuration    Config;


namespace POWER_Utils {

    double getBatteryVoltage() {
        #if defined(HAS_AXP192) || defined(HAS_AXP2101)
            return (PMU.getBattVoltage() / 1000.0);
        #else
            return 0.0;
        #endif
    }

    bool isBatteryConnected() {
        #if defined(HAS_AXP192) || defined(HAS_AXP2101)
            return PMU.isBatteryConnect();
        #else
            return false;
        #endif
    }

    void activateMeasurement() {
        #if defined(HAS_AXP192) || defined(HAS_AXP2101)
            PMU.disableTSPinMeasure();
            PMU.enableBattDetection();
            PMU.enableVbusVoltageMeasure();
            PMU.enableBattVoltageMeasure();
            PMU.enableSystemVoltageMeasure();
        #endif
    }

    void activateGPS() {
        #ifdef HAS_AXP192
            PMU.setLDO3Voltage(3300);
            PMU.enableLDO3();
        #endif

        #ifdef HAS_AXP2101
            #ifdef TTGO_T_Beam_S3_SUPREME_V3
                PMU.setALDO4Voltage(3300);
                PMU.enableALDO4();
            #else
                PMU.setALDO3Voltage(3300);
                PMU.enableALDO3();
            #endif
        #endif
        #ifdef HELTEC_WIRELESS_TRACKER
            digitalWrite(VEXT_CTRL, HIGH);
        #endif
        //gpsIsActive = true;
    }

    void deactivateGPS() {
        #ifdef HAS_AXP192
            PMU.disableLDO3();
        #endif

        #ifdef HAS_AXP2101
            #ifdef TTGO_T_Beam_S3_SUPREME_V3
                PMU.disableALDO4();
            #else
                PMU.disableALDO3();
            #endif
        #endif
        #ifdef HELTEC_WIRELESS_TRACKER
            digitalWrite(VEXT_CTRL, LOW);
        #endif
        //gpsIsActive = false;
    }

    void activateLoRa() {
        #ifdef HAS_AXP192
            PMU.setLDO2Voltage(3300);
            PMU.enableLDO2();
        #endif
        #ifdef HAS_AXP2101
            #ifdef TTGO_T_Beam_S3_SUPREME_V3
                PMU.setALDO3Voltage(3300);
                PMU.enableALDO3();
            #else
                PMU.setALDO2Voltage(3300);
                PMU.enableALDO2();
            #endif
        #endif
    }

    void deactivateLoRa() {
        #ifdef HAS_AXP192
            PMU.disableLDO2();
        #endif
        #ifdef HAS_AXP2101
            #ifdef TTGO_T_Beam_S3_SUPREME_V3
                PMU.disableALDO3();
            #else
                PMU.disableALDO2();
            #endif
        #endif
    }

    bool begin(TwoWire &port) {
        #if defined(HAS_AXP192)
            bool result = PMU.begin(Wire, AXP192_SLAVE_ADDRESS, I2C_SDA, I2C_SCL);
            if (result) {
                PMU.disableDC2();
                PMU.disableLDO2();
                PMU.disableLDO3();
                PMU.setDC1Voltage(3300);
                PMU.enableDC1();
                PMU.setProtectedChannel(XPOWERS_DCDC3);
                PMU.disableIRQ(XPOWERS_AXP192_ALL_IRQ);
            }
            return result;
        #elif defined(HAS_AXP2101)
            #ifdef TTGO_T_Beam_S3_SUPREME_V3
                bool result = PMU.begin(Wire1, AXP2101_SLAVE_ADDRESS, I2C1_SDA, I2C1_SCL);
            #else
                bool result = PMU.begin(Wire, AXP2101_SLAVE_ADDRESS, I2C_SDA, I2C_SCL);
            #endif
            if (result) {
                PMU.disableDC2();
                PMU.disableDC3();
                PMU.disableDC4();
                PMU.disableDC5();
                #ifndef TTGO_T_Beam_S3_SUPREME_V3
                    PMU.disableALDO1();
                    PMU.disableALDO4();
                #endif
                PMU.disableBLDO1();
                PMU.disableBLDO2();
                PMU.disableDLDO1();
                PMU.disableDLDO2();
                PMU.setDC1Voltage(3300);
                PMU.enableDC1();
                #ifdef TTGO_T_Beam_S3_SUPREME_V3
                    PMU.setALDO1Voltage(3300);
                #endif
                PMU.setButtonBatteryChargeVoltage(3300);
                PMU.enableButtonBatteryCharge();
                PMU.disableIRQ(XPOWERS_AXP2101_ALL_IRQ);
            }
            return result;
        #else
            return true;
        #endif
    }

    void setup() {
        #ifdef HAS_AXP192
            Wire.begin(SDA, SCL);
            if (begin(Wire)) {
                Serial.println("AXP192 init done!");
            } else {
                Serial.println("AXP192 init failed!");
            }
            activateLoRa();
            activateMeasurement();
            PMU.setChargerTerminationCurr(XPOWERS_AXP192_CHG_ITERM_LESS_10_PERCENT);
            PMU.setChargeTargetVoltage(XPOWERS_AXP192_CHG_VOL_4V2);
            PMU.setChargerConstantCurr(XPOWERS_AXP192_CHG_CUR_780MA);
            PMU.setSysPowerDownVoltage(2600);
        #endif

        #ifdef HAS_AXP2101
            bool beginStatus = false;
            #ifdef TTGO_T_Beam_S3_SUPREME_V3
                Wire1.begin(I2C1_SDA, I2C1_SCL);
                Wire.begin(I2C0_SDA, I2C0_SCL);
                if (begin(Wire1)) beginStatus = true;
            #else
                Wire.begin(SDA, SCL);
                if (begin(Wire)) beginStatus = true;
            #endif
            if (beginStatus) {
                Serial.println("AXP2101 init done!");
            } else {
                Serial.println("AXP2101 init failed!");
            }
            activateLoRa();
            activateMeasurement();
            PMU.setPrechargeCurr(XPOWERS_AXP2101_PRECHARGE_200MA);
            PMU.setChargerTerminationCurr(XPOWERS_AXP2101_CHG_ITERM_25MA);
            PMU.setChargeTargetVoltage(XPOWERS_AXP2101_CHG_VOL_4V2);
            PMU.setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_800MA);
            PMU.setSysPowerDownVoltage(2600);
        #endif

        #ifdef BATTERY_PIN
            pinMode(BATTERY_PIN, INPUT);
        #endif

        #ifdef INTERNAL_LED_PIN
            pinMode(INTERNAL_LED_PIN, OUTPUT);
            digitalWrite(INTERNAL_LED_PIN, LOW);
        #endif

        if (Config.battery.sendExternalVoltage || Config.battery.monitorExternalVoltage) {
            pinMode(Config.battery.externalVoltagePin, INPUT);
        }

        #ifdef VEXT_CTRL
            pinMode(VEXT_CTRL,OUTPUT); // GPS + TFT on HELTEC Wireless_Tracker and only for Oled in HELTEC V3
            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3)
                digitalWrite(VEXT_CTRL, Config.digi.ecoMode == 1 ? LOW : HIGH);
            #endif
            #if defined(HELTEC_WP) || defined(HELTEC_WS) || defined(HELTEC_V3_2) || defined(HELTEC_WSL_V3)
                digitalWrite(VEXT_CTRL, Config.digi.ecoMode == 1 ? HIGH : LOW);
            #endif
        #endif
        
        #ifdef HAS_GPS
            if (Config.beacon.gpsActive && Config.digi.ecoMode != 1) activateGPS();
        #endif

        #ifdef ADC_CTRL
            pinMode(ADC_CTRL, OUTPUT);
            #if defined(HELTEC_WIRELESS_TRACKER) || defined(HELTEC_V3_2)
                digitalWrite(ADC_CTRL, LOW);
            #endif
            #if defined(HELTEC_V3) || defined(HELTEC_V2) || defined(HELTEC_WSL_V3) || defined(HELTEC_WP)
                digitalWrite(ADC_CTRL, HIGH);
            #endif
        #endif

        #if defined(HELTEC_WIRELESS_TRACKER)
            Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
        #endif

        #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WS) || defined(LIGHTGATEWAY_1_0) || defined(LIGHTGATEWAY_PLUS_1_0) || defined(TTGO_LORA32_T3S3_V1_2) || defined(HELTEC_V2)
            Wire.begin(OLED_SDA, OLED_SCL);
        #endif

        #if defined(HELTEC_V3) || defined(HELTEC_V3_2) || defined(HELTEC_WP) || defined(HELTEC_WSL_V3) || defined(HELTEC_WSL_V3_DISPLAY)
            Wire1.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
        #endif

        #if defined(TTGO_T_DECK_GPS) || defined(TTGO_T_DECK_PLUS)
            pinMode(BOARD_POWERON, OUTPUT);
            digitalWrite(BOARD_POWERON, HIGH);

            pinMode(BOARD_SDCARD_CS, OUTPUT);
            pinMode(RADIO_CS_PIN, OUTPUT);
            pinMode(TFT_CS, OUTPUT);

            digitalWrite(BOARD_SDCARD_CS, HIGH);
            digitalWrite(RADIO_CS_PIN, HIGH);
            digitalWrite(TFT_CS, HIGH);

            delay(500);
            Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
        #endif
        
        delay(1000);
        BATTERY_Utils::setup();
        BATTERY_Utils::startupBatteryHealth();
        setCpuFrequencyMhz(80);
    }

}