Hayley c3dd1eafb7 Set flow control for higher baud rate ... per FTDI reccommendation, set the flow control to XON-XOFF, with 0x11 = Xon and 0x13 Xoff, per example by FTDI		2019-06-24 14:36:58 -05:00
..
bit_pattern_matcher.c	Try to unify code style	2015-08-25 10:15:43 -05:00
bit_pattern_matcher.h	Try to unify code style	2015-08-25 10:15:43 -05:00
dstar.c	RX State Machine HEADER_PROCESSING to BIT_FRAME_SYNC	2019-06-20 13:37:04 -05:00
dstar.h	Move RX=END status message to DSTAR State machine and add new STATUS_END_RX case in status message function	2015-08-31 11:52:41 -05:00
DStarDefines.h	Add slow data encode of message and header data	2015-08-26 14:18:32 -05:00
gmsk_modem.c	Add slight peaking IIR at 4800Hz after GMSK demod.	2015-09-03 12:49:20 -05:00
gmsk_modem.h	Add slight peaking IIR at 4800Hz after GMSK demod.	2015-09-03 12:49:20 -05:00
slow_data.c	Reset message index if we decode gets off	2015-09-03 10:46:32 -05:00
slow_data.h	Add slow_data.c|.h	2015-08-29 14:48:56 -05:00
thumbDV.c	Set flow control for higher baud rate	2019-06-24 14:36:58 -05:00
thumbDV.h	Always unlink from decoded list if there is data	2019-06-21 09:50:18 -05:00