Meshtastic-Apple/zh-Hans.lproj/Localizable.strings

/*
  Localizable.strings
  Meshtastic

  Created by BG6TNB on 01/06/23.
  
*/
"about"="关于";
"about.meshtastic"="关于 Meshtastic";
"activity"="活动";
"admin"="管理员";
"admin.log"="管理员消息日志";
"ago"="之前";
"airtime"="广播时间";
"always.on"="常亮";
"ambient.lighting"="氛围灯";
"ambient.lighting.config"="氛围灯配置";
"appsettings"="通用设置";
"appsettings.provide.location"="提供定位到 Mesh 网络";
"appsettings.smartposition"="智能定位";
"are.you.sure"="是否确认？";
"ascii.capable"="ASCII 兼容";
"available.radios"="可以连接的电台";
"automatic.detection"="自动识别";
"battery.level"="电池电量";
"ble.name"="蓝牙名称";
"ble.connection.timeout %d %@"="尝试连接%@失败，你可能需要在系统设置的蓝牙选项中忽略该电台。";
"ble.errorcode.6 %@"="%@ 如果在首选电台的旁边，App 将会自动重连。";
"ble.errorcode.14 %@"="%@ 这个错误通常无法自动修复，你需要在系统设置的蓝牙选项中忽略该电台并重新配对。";
"ble.errorcode.pin %@"="%@ 请再次尝试连接并仔细检查 PIN 码。";
"bluetooth"="蓝牙";
"bluetooth.off"="蓝牙已关闭";
"bluetooth.config"="蓝牙配置";
"bluetooth.mode.randompin"="随机 PIN 码";
"bluetooth.mode.fixedpin"="固定 PIN 码";
"bluetooth.mode.nopin"="不使用 PIN 码（直接配对）";
"bluetooth.pairingmode"="配对模式";
"bluetooth.pin.validation"="蓝牙 PIN 码必须是 6 位数字。";
"bytes"="字节";
"cancel"="取消";
"canned.messages"="快捷消息";
"canned.messages.config"="快捷消息配置";
"canned.messages.preset.manual"="手动配置";
"canned.messages.preset.rakrotary"="RAK 旋转编码器";
"canned.messages.preset.cardkb"="M5Stack 卡片键盘 / RAK 键盘";
"channel"="频道";
"channel.role.disabled"="禁用";
"channel.role.primary"="主要";
"channel.role.secondary"="次要";
"channel.utilization"="频道利用率";
"channels"="频道";
"clear.app.data"="清除 App 数据";
"clear.log"="清除日志";
"close"="关闭";
"config.power.settings"="电源";
"config.power.title"="电源配置";
"config.power.section.battery"="电池";
"config.power.section.sleep"="休眠";
"config.power.adc.override"="ADC 修改";
"config.power.adc.multiplier"="ADC 放大";
"config.power.ls.secs"="轻度睡眠间隔";
"config.power.min.wake.secs"="最小唤醒间隔";
"config.power.saving"="省电模式";
"config.power.saving.description"="尽可能将所有部件都置于休眠状态，对于跟踪器和传感器功能，这还包括 LoRa 无线电。如果您要使用手机应用程序或者使用没有用户按钮的设备，请不要使用这个设置。";
"config.power.shutdown.on.power.loss"="断电时关机";
"config.power.shutdown.after.secs"="After";
"config.power.wait.bluetooth.secs"="蓝牙关闭 After";
"config.ringtone"="RTTTL 铃声";
"config.ringtone.title"="铃声配置";
"config.ringtone.label"="铃声传输语言";
"config.ringtone.description"="支持外部通知中使用的铃声传输语言 (RTTTL) 铃声字符串。";
"config.module.paxcounter.settings"="PAX 计数器";
"config.module.paxcounter.title"="PAX 计数器配置";
"config.module.paxcounter.enabled.description"="启用 PAX 计数器模块时，通过使用 WiFi 和蓝牙来计算经过的人数。为了使 PAX 计数器正常工作，必须将 WiFi 和蓝牙都禁用。";
"config.module.paxcounter.updateinterval"="更新间隔";
"config.module.paxcounter.updateinterval.description"="检测到人员时，我们可以隔多久发送一条消息到 Mesh";
"config.save.confirm"="电台将会在配置保存后重启。";
"connected.radio"="已连接的电台";
"communicating"="与电台进行通讯中...";
"connected"="已连接到电台";
"connecting"="连接中...";
"contacts"="联系人";
"contacts %@"="联系人 (%@)";
"copy"="复制";
"current"="当前";
"default"="默认";
"delete"="删除";
"detection.sensor"="检测传感器";
"device"="电台";
"device.config"="电台配置";
"device.configuration"="设备配置";
"device.metrics.delete"="删除所有电台指标?";
"device.metrics.log"="电台指标日志";
"device.role.client"="标准模式 - App 可以连接到电台进行收发操作，并且会自动转发 Mesh 网络中其他节点的消息。";
"device.role.clientmute"="静默模式 - 与标准模式类似，App 可以连接到电台进行收发操作，但不会转发 Mesh 网络中其他节点的消息。";
"device.role.clienthidden"="用于\"只有在被请求时才发言\"的节点。关闭所有常规广播，但允许临时通信。仍然会进行转发，但采用本地转发模式（仅限已知的网络）。可用于私密操作或大幅减少空中时间/功耗。";
"device.role.lostandfound"="用于定期自动向 Mesh 发送包含设备当前位置的文本消息的功能：\"I'm lost! Position: lat / long\"";
"device.role.router"="纯路由模式 -  自动转发 Mesh 网络中其他节点的消息，中继模式下屏幕会熄灭，Wi-Fi 和蓝牙将会进入睡眠模式，App 将无法连接到电台进行收发操作。";
"device.role.routerclient"="路由客户端模式 - 优先转发 Mesh 网络中其他节点的消息，App 也可以连接到电台进行收发操作。";
"device.role.repeater"="中继模式 - Mesh 网络数据包将优先通过此节点路由。此模式可消除不必要的开销，如节点信息、设备遥测和任何其他 Mesh 数据包，从而使设备不显示为 Mesh 网络的一部分。有关此角色的其他特定设置，请参阅转播模式。";
"device.role.tracker"="定位模式 - 用于作为 GPS 跟踪器。从该设备发送的定位数据包优先级较高，每两分钟广播一次。智能位置广播默认为关闭。";
"device.role.lostandfound"="定期向默认通道广播位置信息，以帮助寻回设备。";
"device.role.sensor"="将遥测数据包优先广播。";
"device.role.tak"="针对 ATAK 系统通信进行优化，减少常规广播。";
"device.role.taktracker"="启用自动 TAK PLI（Position Location Information）广播，并减少常规广播。";
"direct.messages"="直频消息";
"dismiss.keyboard"="隐藏键盘";
"display"="屏幕（电台屏幕）";
"display.config"="屏幕配置";
"distance"="距离";
"disconnect"="断开连接";
"echo"="回声";
"email.address"="邮件地址";
"enabled"="启用";
"encrypted"="加密";
"export"="Export";
"external.notification"="外部通知";
"external.notification.config"="外部通知配置";
"finish"="Finish";
"firmware.version"="固件版本";
"firmware.version.unsupported"="检测到不支持的固件版本，无法连接到电台。";
"gas"="气体";
"gas.resistance"="气体阻抗";
"generate.qr.code"="生成二维码";
"gpsformat.dec"="十进制";
"gpsformat.dms"="度分秒";
"gpsformat.utm"="通用横轴墨卡托投影";
"gpsformat.mgrs"="军事网格参考系统";
"gpsformat.olc"="开放的位置代码（又称加码）";
"gpsformat.osgr"="英国国土测量局网格参考";
"heard"="收到";
"heard.last"="最后收到";
"hybrid"="混合";
"hybrid.flyover"="混合视图";
"include"="包含";
"incomplete"="Incomplete";
"inputevent.none"="无";
"inputevent.up"="上";
"inputevent.down"="下";
"inputevent.left"="左";
"inputevent.right"="右";
"inputevent.select"="选择";
"inputevent.back"="后退";
"inputevent.cancel"="取消";
"interval.one.second"="一秒";
"interval.two.seconds"="两秒";
"interval.three.seconds"="三秒";
"interval.four.seconds"="四秒";
"interval.five.seconds"="五秒";
"interval.ten.seconds"="十秒";
"interval.fifteen.seconds"="十五秒";
"interval.twenty.seconds"="二十秒";
"interval.twentyfive.seconds"="二十五秒";
"interval.thirty.seconds"="三十秒";
"interval.fortyfive.seconds"="四十五秒";
"interval.one.minute"="一分钟";
"interval.two.minutes"="两分钟";
"interval.five.minutes"="五分钟";
"interval.ten.minutes"="十分钟";
"interval.fifteen.minutes"="十五分钟";
"interval.thirty.minutes"="三十分钟";
"interval.one.hour"="一小时";
"interval.two.hours"="两小时";
"interval.three.hours"="三小时";
"interval.four.hours"="四小时";
"interval.five.hours"="五小时";
"interval.six.hours"="六小时";
"interval.twelve.hours"="十二小时";
"interval.eighteen.hours"="十八小时";
"interval.twentyfour.hours"="二十四小时";
"interval.thirtysix.hours"="三十六小时";
"interval.tyeight.hours"="四十八小时小时";
"interval.eventytwo.hours"="七十二小时";
"keyboard.type"="键盘类型";
"logging"="加载中";
"lora"="LoRa";
"lora.config"="LoRa 配置";
"map"="Mesh 地图";
"map.centering"="居中";
"map.tiles.delete"="删除已缓存的地图区块";
"map.recentering"="自动重新居中";
"map.use.legacy"="使用传统网状地图";
"map.type"="地图类型";
"map.usertrackingmode"="用户跟随模式";
"map.usertrackingmode.none"="无";
"map.usertrackingmode.follow"="跟随";
"map.usertrackingmode.followwithheading"="跟随航向";
"mesh.live.activity"="Mesh 实时活动";
"mesh.log"="Mesh 日志";
"mesh.log.ambientlighting.config %@"="Ambient Lighting module config received: %@";
"mesh.log.bluetooth.config %@"="Bluetooth config received: %@";
"mesh.log.cannedmessage.config %@"="Canned Message module config received: %@";
"mesh.log.cannedmessages.messages.get %@"="Requested Canned Messages Module Messages for node: %@";
"mesh.log.cannedmessages.messages.received %@"="Canned Messages Messages Received For: %@";
"mesh.log.channel.sent %@ %d"="Sent a Channel for: %@ Channel Index %d";
"mesh.log.channel.received %d %@"="Channel %d received from: %@";
"mesh.log.device.config %@"="Device config received: %@";
"mesh.log.display.config %@"="Display config received: %@";
"mesh.log.devicemetadata %@"="Requesting Device Metadata for %@";
"mesh.log.device.metadata.received %@"="Device Metadata admin message received from: %@";
"mesh.log.detectionsensor.config %@"="Detection Sensor module config received: %@";
"mesh.log.externalnotification.config %@"="External Notification module config received: %@";
"mesh.log.lora.config %@"="LoRa config received: %@";
"mesh.log.lora.config.sent %@"="Sent a LoRa.Config for: %@";
"mesh.log.mqtt.config %@"="MQTT module config received: %@";
"mesh.log.myinfo %@"="MyInfo received: %@";
"mesh.log.network.config %@"="Network config received: %@";
"mesh.log.nodeinfo.received %@"="Node info received for: %@";
"mesh.log.paxcounter %@"="PAX Counter message received for: %@";
"mesh.log.position.config %@"="Positon config received: %@";
"mesh.log.position.received %@"="Position Packet received from node: %@";
"mesh.log.rangetest.config %@"="Range Test module config received: %@";
"mesh.log.ringtone.config %@"="RTTTL Ringtone config received: %@";
"mesh.log.routing.message %@ %@"="Routing received for RequestID: %@ Ack Status: %@";
"mesh.log.serial.config %@"="Serial module config received: %@";
"mesh.log.sharelocation %@"="Sent a Position Packet from the Apple device GPS to node: %@";
"mesh.log.storeforward.config %@"="Store & Forward module config received: %@";
"mesh.log.telemetry.config %@"="Telemetry module config received: %@";
"mesh.log.telemetry.received %@"="Telemetry received for: %@";
"mesh.log.textmessage.received"="Message received from the text message app.";
"mesh.log.textmessage.send.failed %@"="Message Send Failed, not properly connected to %@";
"mesh.log.textmessage.sent %@ %@ %@"="Sent message %@ from %@ to %@";
"mesh.log.traceroute.received.direct %@"="Trace Route request sent to node: %@ was recieived directly.";
"mesh.log.traceroute.received.route %@"="Trace Route request returned: %@";
"mesh.log.traceroute.sent %@"="Sent a Trace Route Request to node: %@";
"mesh.log.wantconfig %@"="Issuing Want Config to %@";
"mesh.log.waypoint.sent %@"="Sent a Waypoint Packet from: %@";
"mesh.log.waypoint.received %@"="Waypoint Packet received from node: %@";
"message"="消息";
"message.details"="消息详情";
"messages"="消息";
"mode"="模式";
"module.configuration"="模块配置";
"mqtt"="MQTT";
"mqtt.connect"="连接至 MQTT";
"mqtt.config"="MQTT 配置";
"mqtt.clientproxy"="MQTT 客户端代理";
"mqtt.disconnect"="断开 MQTT 连接";
"mqtt.username"="用户名称";
"name"="名称";
"network"="网络";
"network.config"="网络配置";
"nodes"="节点";
"nodes %@"="节点 (%@)";
"nodelist.filter.distance %@"="最远距离 %@";
"no.nodes"="未找到 Meshtastic 节点";
"not.connected"="未连接到电台";
"numbers.punctuation"="数字和标点符号";
"off"="关闭";
"offline"="离线";
"on.boot"="仅在启动时";
"options"="选项";
"password"="密码";
"pause"="暂停";
"phone.gps"="手机 GPS";
"phone.gps.interval.description"="电台通过手机获取定位的时间间隔，但是向 Mesh 网络中刷新定位的时间间隔由电台控制。";
"position"="定位";
"position.config"="定位配置";
"preferred.radio"="首选电台";
"radio.configuration"="电台配置";
"range.test"="拉距测试";
"range.test.blocked"="区块范围测试";
"range.test.config"="拉距测试配置";
"reply"="回复";
"reboot"="重启";
"reboot.node"="重启节点？";
"received.ack"="收到确认";
"received.ack.real"="收件人确认";
"resume"="恢复";
"ringtone"="铃声";
"ringtone.config"="铃声设置";
"route.recorder"="路径记录器";
"routes"="路径";
"routing.acknowledged"="确认";
"routing.noroute"="找不到目标";
"routing.gotnak"="收到否认";
"routing.timeout"="超时";
"routing.nointerface"="无连接";
"routing.maxretransmit"="已达到最大重试次数";
"routing.nochannel"="没有频道";
"routing.toolarge"="数据包过大";
"routing.noresponse"="无响应";
"routing.dutycyclelimit"="已达到当前区域循环周期发射上限";
"routing.badRequest"="错误请求";
"routing.notauthorized"="未授权";
"satellite"="卫星";
"satellite.flyover"="卫星视图";
"save"="保存";
"save.config %@"="保存%@的配置";
"serial"="串口";
"serial.config"="串口配置";
"serial.mode.default"="默认";
"serial.mode.simple"="简单";
"serial.mode.proto"="Protobufs";
"serial.mode.txtmsg"="文本消息";
"serial.mode.nmea"="NMEA 位置";
"settings"="设置";
"share.channels"="分享频道二维码";
"share.position"="分享位置";
"subscribed"="连接到 Mesh 网络";
"select.contact"="选择一名联系人";
"select.node"="选择一个节点";
"select.menu.item"="从菜单选择一个选项";
"set.region"="设置 LoRa 区域";
"standard"="标准";
"standard.muted"="标准静音";
"start"="开始";
"ssid"="SSID";
"storeforward"="储存 & 转发";
"storeforward.config"="储存 & 转发设置";
"storeforward.heartbeat"="发送心跳包";
"tapback"="响应";
"tapback.heart"="心";
"tapback.thumbsup"="竖大拇指";
"tapback.thumbsdown"="倒大拇指";
"tapback.haha"="哈哈";
"tapback.exclamation"="感叹号";
"tapback.question"="问号";
"tapback.poop"="便便";
"tapback.wave"="Wave";
"telemetry"="遥测（传感器）";
"telemetry.config"="遥测配置";
"timeout"="超时";
"timestamp"="时间戳";
"tip.bluetooth.connect.title"="连接到 LoRa 电台";
"tip.bluetooth.connect.message"="显示当前通过蓝牙连接的 Lora 电台的信息。您可以向左滑动断开电台，长按查看统计信息或开始实时活动。";
"tip.channel.admin.title"="admin 频道";
"tip.channel.admin.message"="检测到 admin 频道：请从下拉菜单中选择一个节点，来管理已连接或远程设备。";
"tip.channels.create.title"="管理频道";
"tip.channels.create.message"="大多数 Mesh 上的数据都通过主要频道发送。您可以设置次要频道，以创建额外的消息组，并通过其自己的密钥进行安全保护。 [频道配置提示](https://meshtastic.org/docs/configuration/radio/channels/)";
"tip.channels.share.title"="共享 Meshtastic 频道";
"tip.channels.share.message"="在 Meshtastic 网络中最多有 8 个频道。第一个频道是主频道，大多数活动都发生在这里，也是必需的。如果您不共享主频道，您的第一个共享频道就会成为其他网络的主频道。它会在其主频道和您的辅助频道上对话。名称为 admin 的频道可远程控制节点。其他频道用于私人群组，每个群组都有自己的密钥。";
"tip.messages.title"="消息";
"tip.messages.message"="您可以发送和接收直频消息和群聊。在任何信息中，您都可以长按查看可用的操作，如复制、回复、拍一拍、删除以及详情。";
"twitter"="Twitter";
"unknown"="未知";
"unknown.age"="未知时间";
"unset"="未设置";
"update.firmware"="更新你的固件";
"update.interval"="更新间隔";
"user"="用户";
"user.details"="用户信息";
"voltage"="电压";
"waiting"="等待中...";
"appsettings.newNodeNotifications"="新节点通知";