Rename Project to satisfy app review

Meshtastic/Views/Settings/Config/Module/CannedMessagesConfig.swift

@@ -0,0 +1,8 @@
+//
+//  CannedMessagesConfig.swift
+//  MeshtasticApple
+//
+//  Created by Garth Vander Houwen on 6/22/22.
+//
+
+import Foundation

Meshtastic/Views/Settings/Config/Module/ExternalNotificationConfig.swift

@@ -0,0 +1,94 @@
+//
+//  External Notification Config.swift
+//  Meshtastic Apple
+//
+//  Copyright (c) Garth Vander Houwen 6/22/22.
+//
+import SwiftUI
+
+struct ExternalNotificationConfig: View {
+	
+	@Environment(\.managedObjectContext) var context
+	@EnvironmentObject var bleManager: BLEManager
+	
+	var node: NodeInfoEntity
+	
+	@State var enabled = false
+	@State var outputMilliseconds = 0
+	@State var output = 0
+	@State var active = false
+	@State var alertMessage = false
+	@State var alertBell = false
+	
+	var body: some View {
+		
+		VStack {
+
+			Form {
+				
+				Section(header: Text("Options")) {
+					
+					Toggle(isOn: $enabled) {
+
+						Label("Enabled", systemImage: "megaphone")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+				
+					Toggle(isOn: $alertBell) {
+
+						Label("Alert when receiving a bell", systemImage: "bell")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+					
+					Toggle(isOn: $alertMessage) {
+
+						Label("Alert when receiving a message", systemImage: "message")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+				}
+				
+				Section(header: Text("GPIO")) {
+					
+					Toggle(isOn: $active) {
+
+						Label("Active", systemImage: "togglepower")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+					Text("Specifies whether the external circuit is triggered when the device's GPIO is low or high.")
+						.font(.caption)
+						.listRowSeparator(.visible)
+					
+					Picker("GPIO to monitor", selection: $output) {
+						ForEach(0..<40) {
+							
+							if $0 == 0 {
+								
+								Text("Unset")
+								
+							} else {
+							
+								Text("Pin \($0)")
+							}
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+					Text("Specifies the GPIO that your external circuit is attached to on the device.")
+						.font(.caption)
+						.listRowSeparator(.visible)
+				}
+			}
+			.navigationTitle("External Notification Config")
+			.navigationBarItems(trailing:
+
+				ZStack {
+
+				ConnectedDevice(bluetoothOn: bleManager.isSwitchedOn, deviceConnected: bleManager.connectedPeripheral != nil, name: (bleManager.connectedPeripheral != nil) ? bleManager.connectedPeripheral.shortName : "?????")
+			})
+			.onAppear {
+
+				self.bleManager.context = context
+			}
+			.navigationViewStyle(StackNavigationViewStyle())
+		}
+	}
+}

Meshtastic/Views/Settings/Config/Module/RangeTestConfig.swift

@@ -0,0 +1,64 @@
+//
+//  TelemetryConfig.swift
+//  Meshtastic Apple
+//
+//  Copyright (c) Garth Vander Houwen 6/13/22.
+//
+import SwiftUI
+
+struct RangeTestConfig: View {
+	
+	@Environment(\.managedObjectContext) var context
+	@EnvironmentObject var bleManager: BLEManager
+	
+	@State var enabled = false
+	@State var sender = false
+	@State var save = false
+	
+	var body: some View {
+		
+		VStack {
+
+			Form {
+				
+				Section(header: Text("Options")) {
+				
+					Toggle(isOn: $enabled) {
+
+						Label("Enabled", systemImage: "figure.walk")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+					
+					Toggle(isOn: $sender) {
+
+						Label("Sender", systemImage: "paperplane")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+					Text("This device will send out range test messages.")
+						.font(.caption)
+					
+					Toggle(isOn: $save) {
+
+						Label("Save", systemImage: "square.and.arrow.down.fill")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+					
+					Text("Saves a CSV with the range test message details, only available on ESP32 devices with a web server.")
+						.font(.caption)
+				}
+			}
+			.navigationTitle("Range Test Config")
+			.navigationBarItems(trailing:
+
+				ZStack {
+
+					ConnectedDevice(bluetoothOn: bleManager.isSwitchedOn, deviceConnected: bleManager.connectedPeripheral != nil, name: (bleManager.connectedPeripheral != nil) ? bleManager.connectedPeripheral.shortName : "?????")
+			})
+			.onAppear {
+
+				self.bleManager.context = context
+			}
+			.navigationViewStyle(StackNavigationViewStyle())
+		}
+	}
+}

Meshtastic/Views/Settings/Config/Module/SerialConfig.swift

@@ -0,0 +1,226 @@
+//
+//  SerialConfig.swift
+//  Meshtastic Apple
+//
+//  Copyright (c) Garth Vander Houwen 6/22/22.
+//
+import SwiftUI
+
+enum SerialBaudRates: Int, CaseIterable, Identifiable {
+
+	case baudDefault = 0
+	case baud110 = 1
+	case baud300 = 2
+	case baud600 = 3
+	case baud1200 = 4
+	case baud2400 = 5
+	case baud4800 = 6
+	case baud9600 = 7
+	case baud19200 = 8
+	case baud38400 = 9
+	case baud57600 = 10
+	case baud115200 = 11
+	case baud230400 = 12
+	case baud460800 = 13
+	case baud576000 = 14
+	case baud921600 = 15
+
+	var id: Int { self.rawValue }
+	var description: String {
+		get {
+			switch self {
+
+			case .baudDefault:
+				return "Unset"
+			case .baud110:
+				return "110 Baud"
+			case .baud300:
+				return "300 Baud"
+			case .baud600:
+				return "600 Baud"
+			case .baud1200:
+				return "1200 Baud"
+			case .baud2400:
+				return "2400 Baud"
+			case .baud4800:
+				return "4800 Baud"
+			case .baud9600:
+				return "9600 Baud"
+			case .baud19200:
+				return "19200 Baud"
+			case .baud38400:
+				return "38400 Baud"
+			case .baud57600:
+				return "57600 Baud"
+			case .baud115200:
+				return "115200 Baud"
+			case .baud230400:
+				return "230400 Baud"
+			case .baud460800:
+				return "460800 Baud"
+			case .baud576000:
+				return "576000 Baud"
+			case .baud921600:
+				return "921600 Baud"
+			}
+		}
+	}
+}
+
+enum SerialModeTypes: Int, CaseIterable, Identifiable {
+
+	case modeDefault = 0
+	case modeSimple = 1
+	case modeProto = 2
+
+	var id: Int { self.rawValue }
+	var description: String {
+		get {
+			switch self {
+			case .modeDefault:
+				return "Default"
+			case .modeSimple:
+				return "Simple"
+			case .modeProto:
+				return "Protobufs"
+			}
+		}
+	}
+}
+
+enum SerialTimeoutIntervals: Int, CaseIterable, Identifiable {
+
+	case unset = 0
+	case fiveSeconds = 5
+	case tenSeconds = 10
+	case fifteenSeconds = 15
+	case thirtySeconds = 30
+	case oneMinute = 60
+	case fiveMinutes = 300
+
+	var id: Int { self.rawValue }
+	var description: String {
+		get {
+			switch self {
+			case .unset:
+				return "Unset"
+			case .fiveSeconds:
+				return "Five Seconds"
+			case .tenSeconds:
+				return "Ten Seconds"
+			case .fifteenSeconds:
+				return "Fifteen Seconds"
+			case .thirtySeconds:
+				return "Thirty Seconds"
+			case .oneMinute:
+				return "One Minute"
+			case .fiveMinutes:
+				return "Five Minutes"
+
+			}
+		}
+	}
+}
+
+struct SerialConfig: View {
+	
+	@Environment(\.managedObjectContext) var context
+	@EnvironmentObject var bleManager: BLEManager
+	
+	@State var enabled = false
+	@State var echo = false
+	@State var rxd = 0
+	@State var txd = 0
+	@State var baudRate = 0
+	@State var timeout = 0
+	@State var mode = 0
+	
+	var body: some View {
+		
+		VStack {
+
+			Form {
+				
+				Section(header: Text("Options")) {
+				
+					Toggle(isOn: $enabled) {
+
+						Label("Enabled", systemImage: "terminal")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+					
+					Toggle(isOn: $echo) {
+
+						Label("Echo", systemImage: "repeat")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+					
+					Picker("Baud Rate", selection: $baudRate ) {
+						ForEach(SerialBaudRates.allCases) { sbr in
+							Text(sbr.description)
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+					
+					Picker("Timeout", selection: $timeout ) {
+						ForEach(SerialTimeoutIntervals.allCases) { sti in
+							Text(sti.description)
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+					
+					Picker("Mode", selection: $mode ) {
+						ForEach(SerialModeTypes.allCases) { smt in
+							Text(smt.description)
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+				}
+				Section(header: Text("GPIO")) {
+					
+					Picker("Receive data (rxd) GPIO pin", selection: $rxd) {
+						ForEach(0..<40) {
+							
+							if $0 == 0 {
+								
+								Text("Unset")
+								
+							} else {
+							
+								Text("Pin \($0)")
+							}
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+
+					Picker("Transmit data (txd) GPIO pin", selection: $txd) {
+						ForEach(0..<40) {
+							
+							if $0 == 0 {
+								
+								Text("Unset")
+								
+							} else {
+							
+								Text("Pin \($0)")
+							}
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+				}
+			}
+			.navigationTitle("Serial Config")
+			.navigationBarItems(trailing:
+
+				ZStack {
+
+					ConnectedDevice(bluetoothOn: bleManager.isSwitchedOn, deviceConnected: bleManager.connectedPeripheral != nil, name: (bleManager.connectedPeripheral != nil) ? bleManager.connectedPeripheral.shortName : "?????")
+			})
+			.onAppear {
+
+				self.bleManager.context = context
+			}
+			.navigationViewStyle(StackNavigationViewStyle())
+		}
+	}
+}

Meshtastic/Views/Settings/Config/Module/TelemetryConfig.swift

@@ -0,0 +1,311 @@
+//
+//  TelemetryConfig.swift
+//  Meshtastic Apple
+//
+//  Copyright (c) Garth Vander Houwen 6/13/22.
+//
+import SwiftUI
+
+enum SensorTypes: Int, CaseIterable, Identifiable {
+
+	/// No external telemetry sensor explicitly set
+	case notSet = 0
+
+	/// Moderate accuracy temperature
+	case dht11 = 1
+
+	/// High accuracy temperature
+	case ds18B20 = 2
+
+	/// Moderate accuracy temperature and humidity
+	case dht12 = 3
+
+	/// Moderate accuracy temperature and humidity
+	case dht21 = 4
+
+	/// Moderate accuracy temperature and humidity
+	case dht22 = 5
+
+	/// High accuracy temperature, pressure, humidity
+	case bme280 = 6
+
+	/// High accuracy temperature, pressure, humidity, and air resistance
+	case bme680 = 7
+
+	/// Very high accuracy temperature
+	case mcp9808 = 8
+
+	/// Moderate accuracy temperature and humidity
+	case shtc3 = 9
+
+	/// Moderate accuracy current and voltage
+	case ina260 = 10
+
+	/// Moderate accuracy current and voltage
+	case ina219 = 11
+
+	var id: Int { self.rawValue }
+	var description: String {
+		get {
+			switch self {
+			
+			case .notSet:
+				return "Not Set"
+			case .dht11:
+				return "DHT11 - Temperature"
+			case .ds18B20:
+				return "DS18B20 - Temperature"
+			case .dht12:
+				return "DHT12 - Temperature & humidity"
+			case .dht21:
+				return "DHT21 - Temperature & humidity"
+			case .dht22:
+				return "DHT22 - Temperature & humidity"
+			case .bme280:
+				return "BME280 - Temp, pressure & humidity"
+			case .bme680:
+				return "BME680 - Temp, pressure, humidity & air resistance"
+			case .mcp9808:
+				return "MCP9808 - Temperature"
+			case .shtc3:
+				return "SHTC3 - Temperature & humidity"
+			case .ina260:
+				return "INA260 - Current & voltage"
+			case .ina219:
+				return "INA219 - Current & voltage"
+			}
+		}
+	}
+}
+
+// Default of 0 is off
+enum ErrorRecoveryIntervals: Int, CaseIterable, Identifiable {
+
+	case off = 0
+	case fifteenSeconds = 15
+	case thirtySeconds = 30
+	case oneMinute = 60
+	case fiveMinutes = 300
+	case tenMinutes = 600
+	case fifteenMinutes = 900
+	case thirtyMinutes = 1800
+	case oneHour = 3600
+
+	var id: Int { self.rawValue }
+	var description: String {
+		get {
+			switch self {
+			case .off:
+				return "Unset"
+			case .fifteenSeconds:
+				return "Fifteen Seconds"
+			case .thirtySeconds:
+				return "Thirty Seconds"
+			case .oneMinute:
+				return "One Minute"
+			case .fiveMinutes:
+				return "Five Minutes"
+			case .tenMinutes:
+				return "Ten Minutes"
+			case .fifteenMinutes:
+				return "Fifteen Minutes"
+			case .thirtyMinutes:
+				return "Thirty Minutes"
+			case .oneHour:
+				return "One Hour"
+			}
+		}
+	}
+}
+
+enum UpdateIntervals: Int, CaseIterable, Identifiable {
+
+	case fifteenSeconds = 15
+	case thirtySeconds = 30
+	case oneMinute = 60
+	case fiveMinutes = 300
+	case tenMinutes = 600
+	case fifteenMinutes = 0
+	case thirtyMinutes = 1800
+	case oneHour = 3600
+	case twoHours = 7200
+	case threeHours = 10800
+	case fourHours = 14400
+	case fiveHours = 18000
+	case sixHours = 21600
+	case twelveHours = 43200
+	case eighteenHours = 64800
+	case twentyFourHours = 86400
+
+	var id: Int { self.rawValue }
+	var description: String {
+		get {
+			switch self {
+			case .fifteenSeconds:
+				return "Fifteen Seconds"
+			case .thirtySeconds:
+				return "Thirty Seconds"
+			case .oneMinute:
+				return "One Minute"
+			case .fiveMinutes:
+				return "Five Minutes"
+			case .tenMinutes:
+				return "Ten Minutes"
+			case .fifteenMinutes:
+				return "Fifteen Minutes"
+			case .thirtyMinutes:
+				return "Thirty Minutes"
+			case .oneHour:
+				return "One Hour"
+			case .twoHours:
+				return "Two Hours"
+			case .threeHours:
+				return "Three Hours"
+			case .fourHours:
+				return "Four Hours"
+			case .fiveHours:
+				return "Five Hours"
+			case .sixHours:
+				return "Six Hours"
+			case .twelveHours:
+				return "Twelve Hours"
+			case .eighteenHours:
+				return "Eighteen Hours"
+			case .twentyFourHours:
+				return "Twenty Four Hours"
+			}
+		}
+	}
+}
+
+struct TelemetryConfig: View {
+	
+	@Environment(\.managedObjectContext) var context
+	@EnvironmentObject var bleManager: BLEManager
+	
+	@State var deviceUpdateInterval = 0
+	@State var environmentUpdateInterval = 0
+	
+	@State var environmentMeasurementEnabled = false
+	@State var environmentSensorType = 0
+	@State var environmentScreenEnabled = false
+	@State var environmentDisplayFahrenheit = false
+	@State var environmentSensorPin = 0
+	@State var environmentRecoveryInterval = 0
+	@State var environmentReadErrorCountThreshold = 0
+	
+	var body: some View {
+		
+		VStack {
+
+			Form {
+				
+				Section(header: Text("Update Intervals")) {
+					
+					Picker("Device Metrics", selection: $deviceUpdateInterval ) {
+						ForEach(UpdateIntervals.allCases) { ui in
+							Text(ui.description)
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+					Text("How often device metrics are sent out over the mesh. Default is 15 minutes.")
+						.font(.caption)
+					
+					Picker("Sensor Metrics", selection: $environmentUpdateInterval ) {
+						ForEach(UpdateIntervals.allCases) { ui in
+							Text(ui.description)
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+					Text("How often sensor metrics are sent out over the mesh. Default is 15 minutes.")
+						.font(.caption)
+				}
+				
+				Section(header: Text("Sensor Options")) {
+				
+					Toggle(isOn: $environmentMeasurementEnabled) {
+
+						Label("Enabled", systemImage: "chart.xyaxis.line")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+					
+					Picker("Sensor", selection: $environmentSensorType ) {
+						ForEach(SensorTypes.allCases) { st in
+							Text(st.description)
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+					
+					Toggle(isOn: $environmentScreenEnabled) {
+
+						Label("Show on device screen", systemImage: "display")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+
+					Toggle(isOn: $environmentDisplayFahrenheit) {
+
+						Label("Display Fahrenheit", systemImage: "thermometer")
+					}
+					.toggleStyle(SwitchToggleStyle(tint: .accentColor))
+
+					Picker("GPIO Pin for sensor readings", selection: $environmentSensorPin) {
+						ForEach(0..<40) {
+							
+							if $0 == 0 {
+								
+								Text("Unset")
+								
+							} else {
+							
+								Text("Pin \($0)")
+							}
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+				}
+				
+				Section(header: Text("Errors")) {
+					
+					Picker("Error Count Threshold", selection: $environmentReadErrorCountThreshold) {
+						ForEach(0..<101) {
+							
+							if $0 == 0 {
+								
+								Text("Unset")
+								
+							} else if $0 % 5 == 0 {
+								
+								Text("\($0)")
+							}
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+					Text("Sometimes sensor reads can fail. If this happens, we will retry a configurable number of attempts, each attempt will be delayed by the minimum required refresh rate for that sensor")
+						.font(.caption)
+					
+					Picker("Error Recovery Interval", selection: $environmentRecoveryInterval ) {
+						ForEach(ErrorRecoveryIntervals.allCases) { eri in
+							Text(eri.description)
+						}
+					}
+					.pickerStyle(DefaultPickerStyle())
+					
+					Text("Sometimes we can end up with more failures than our error count threshold. In this case, we will stop trying to read from the sensor for a while. Wait this long until trying to read from the sensor again")
+						.font(.caption)
+				}
+			}
+			.navigationTitle("Telemetry Config")
+			.navigationBarItems(trailing:
+
+				ZStack {
+
+				ConnectedDevice(bluetoothOn: bleManager.isSwitchedOn, deviceConnected: bleManager.connectedPeripheral != nil, name: (bleManager.connectedPeripheral != nil) ? bleManager.connectedPeripheral.shortName : "?????")
+			})
+			.onAppear {
+
+				self.bleManager.context = context
+			}
+			.navigationViewStyle(StackNavigationViewStyle())
+		}
+	}
+}