geeksville
0b66d813ef
message status icons approximately work - still a problem on first send though
2020-05-31 11:23:25 -07:00
geeksville
7506d712ff
message status updates are coded but not yet tested.
2020-05-30 19:58:36 -07:00
geeksville
b2d8b30d5b
add packetid assignment to the phone side
2020-05-30 17:28:00 -07:00
geeksville
ed4236d8e3
only use the new api now, old device loads have been out a while
2020-05-30 16:23:42 -07:00
geeksville
6031b5eaa0
clean up message API to/from mesh service, to allow clients to get
...
updates on message status
2020-05-30 15:55:47 -07:00
geeksville
67d95039bf
begin support for message status
2020-05-30 14:38:16 -07:00
geeksville
05776c2593
fix warnings
2020-05-29 14:00:50 -07:00
geeksville
afedd47258
1 one minute boot delay is probably sufficient
2020-05-24 11:42:22 -07:00
geeksville
4d6ca25caf
autobug, prevent redundant notifcations from onConnectChanged
2020-05-24 11:38:33 -07:00
geeksville
238ae9a06c
fix autobug, if we don't have a gatt currently, treat as a BLEException
2020-05-24 11:15:13 -07:00
geeksville
38f45a9413
fix autobug that showed on a MIX2 (whatever that is), ignore BLE state changes
...
when we don't have a gatt
2020-05-24 11:07:15 -07:00
geeksville
e6abd9d1a5
autobugs - some phones send bougs onMtuChanged when we are not setting mtu
2020-05-24 11:01:13 -07:00
geeksville
8b3817964e
make sync BLE operations timeout a bit shorter
2020-05-24 10:47:02 -07:00
geeksville
6d463334a5
fix autobug racecondition that could occur with non gps devices
2020-05-24 10:46:50 -07:00
geeksville
74449be999
don't spam with autobugs if we just fail because the device is off
2020-05-24 10:46:27 -07:00
geeksville
a191dac0f4
stay with old api for now, because too much change hurts reliaiblity ;-)
2020-05-24 10:12:12 -07:00
geeksville
4efd25d009
Possible fix #26 . It seems some phones don't quite have the services
...
list populated at the time they say service discovery has completed.
Make the nasty 500ms delay a 1000ms delay instead
2020-05-24 09:51:25 -07:00
geeksville
774ab65ece
treat radio not connected exception like a remote exception
2020-05-24 09:45:52 -07:00
geeksville
28023b8f42
Fix 27: add timeouts for BLE operations, to protect against buggy drivers
2020-05-24 09:45:39 -07:00
geeksville
bba9def20e
it has been a couple of weeks since new API rolled out, now just
...
always use it
2020-05-24 08:47:36 -07:00
geeksville
501ca3df9d
mark that we want our text transmissions to be reliable
2020-05-21 17:25:04 -07:00
geeksville
c06f5f1c39
set aside ble sw update for now
2020-05-15 10:18:15 -07:00
geeksville
3c338aec61
firmware update progress bar kinda works
2020-05-14 11:47:24 -07:00
geeksville
c1388d6bad
firmware update button is kinda in
2020-05-13 17:00:23 -07:00
geeksville
6576f5eab5
backend updated to reneable firmware update
2020-05-13 14:47:55 -07:00
geeksville
b4da48beb5
after boot wait even longer - 2 min, we are in no rush anyways
...
the phone should be quite less busy by then
2020-05-11 15:27:53 -07:00
geeksville
407a38594f
workaround for slow booting Samsung phones
2020-05-11 13:12:44 -07:00
geeksville
33265c7c2e
fix autobug - if someone runs really old device code with buggy bluetooth
...
just wait for them to fix their device...
https://console.firebase.google.com/u/0/project/meshutil/crashlytics/app/android:com.geeksville.mesh/issues/1948d9ea376e223f34d7065d1aba39df?time=last-seven-days&sessionId=5EB4DF6800B900016F5DA5AAC26367BE_DNE_1_v2
2020-05-11 11:44:24 -07:00
geeksville
0b7f853abc
fix an autobug - race condition on some phones BLE reconnect
2020-05-10 21:39:49 -07:00
geeksville
877006f26b
temp code for testing failures
2020-05-10 21:39:23 -07:00
geeksville
de4cb68930
update to latest protobufs
2020-05-09 21:20:17 -07:00
geeksville
12f7e9a8ce
support int based lat/long
...
for https://github.com/meshtastic/Meshtastic-device/issues/124
2020-05-04 08:05:59 -07:00
geeksville
ee34a7a370
fix missing strings reported by @Mango-sauce
2020-05-01 13:43:57 -07:00
geeksville
d669a06ed7
update protobufs
2020-04-28 18:02:01 -07:00
geeksville
5822dddc6c
Fix #23 : autobug, if we get mystery BLE error 133 while reading messages
...
drop the BLE link and reconnect and try again.
2020-04-26 13:03:35 -07:00
geeksville
ba91920154
fix autobug: if user has location disabled, warn that we can't provide it to mesh
2020-04-25 07:33:51 -07:00
geeksville
51efde08c0
0.5.6 if we lose connection during initial radio download, fail gracefully
2020-04-24 15:59:01 -07:00
geeksville
e302848607
0.5.5 only try to set max MTU once, if it fails consider phone buggy
2020-04-24 15:49:34 -07:00
geeksville
3e89510f52
Some phones have buggy race conditions wrt finding services or characteristics
...
This workaround is: If we fail in that way during initial device connection
we disconnect() and try again 500 ms later.
2020-04-24 15:22:54 -07:00
geeksville
a3db3eca06
We now detect and use the newapi if the device doesn't offer the old one
2020-04-23 12:08:34 -07:00
geeksville
17edf75b95
setting now works using the new ble api
2020-04-23 11:24:57 -07:00
geeksville
a5eaa057a1
new ble api approximately works for reading
2020-04-23 11:24:57 -07:00
geeksville
2ced6f5f6a
WIP, begin adding support for the simpler BLE api
...
https://github.com/meshtastic/Meshtastic-esp32/issues/69
2020-04-23 11:24:57 -07:00
geeksville
6f5c7b2452
move logging to the IO thread
2020-04-22 08:20:57 -07:00
geeksville
8ec8b038b6
Increase MTU _before_ discovering services, because it will speed up the link
2020-04-22 08:10:23 -07:00
geeksville
b63ebadf72
track # of text messages received/sent
2020-04-22 07:59:07 -07:00
geeksville
b194659e8a
Fix autobug: some BLE implementations might not be completed
...
with service enumeration by the time they call the discover services
callback. Therefore be careful to not touch "service" until after
the 500ms delay everyone on stackoverflow says these buggy drivers need.
2020-04-22 07:25:07 -07:00
geeksville
35c745d93f
track total time connected to mesh
2020-04-21 14:46:52 -07:00
geeksville
671bafa05f
don't leak macaddrs into logs - could be possibly personally identifying
2020-04-21 08:21:42 -07:00
geeksville
c00ca9b3db
move notify later, to see if the autobug is _all_ BLE transactions or just notfiies
2020-04-21 07:57:07 -07:00
