diff --git a/app/src/main/res/values-ar-rSA/strings.xml b/app/src/main/res/values-ar-rSA/strings.xml index a310ede96..3d4019afc 100644 --- a/app/src/main/res/values-ar-rSA/strings.xml +++ b/app/src/main/res/values-ar-rSA/strings.xml @@ -53,29 +53,91 @@ Unknown Public Key Bad session key Public Key unauthorized - App connected or standalone messaging device. - Device that does not forward packets from other devices. - Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. - Combination of both ROUTER and CLIENT. Not for mobile devices. - Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. - Broadcasts GPS position packets as priority. - Broadcasts telemetry packets as priority. - Optimized for ATAK system communication, reduces routine broadcasts. - Device that only broadcasts as needed for stealth or power savings. - Broadcasts location as message to default channel regularly for to assist with device recovery. - Enables automatic TAK PLI broadcasts and reduces routine broadcasts. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. - Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. - Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + App connected or standalone messaging device. + Client Mute + Device that does not forward packets from other devices. + Router + Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. + Router Client + Combination of both ROUTER and CLIENT. Not for mobile devices. + Repeater + Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. + Tracker + Broadcasts GPS position packets as priority. + Sensor + Broadcasts telemetry packets as priority. + TAK + Optimized for ATAK system communication, reduces routine broadcasts. + Client Hidden + Device that only broadcasts as needed for stealth or power savings. + Lost and Found + Broadcasts location as message to default channel regularly for to assist with device recovery. + TAK Tracker + Enables automatic TAK PLI broadcasts and reduces routine broadcasts. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. + All Skip Decoding + Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. + لا يوجد + Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. + Core Portnums Only + Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug اسم القناة رمز الاستجابة السريع أيقونة التطبيق @@ -322,7 +384,8 @@ البطارية منخفضه: %s Low battery notifications (favorite nodes) الضغط الجوي - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -400,27 +463,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + الجهاز + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + إعدادات الشاشة + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -441,25 +504,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + إعدادات لورا + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + الجهة + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -476,10 +541,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -491,7 +559,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -509,7 +577,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -524,7 +594,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + إعدادات الحماية + Direct Message Key + Admin Keys Public Key Private Key Admin Key @@ -796,4 +868,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-b+sr+Latn/strings.xml b/app/src/main/res/values-b+sr+Latn/strings.xml index c3d5fb60c..53f331b37 100644 --- a/app/src/main/res/values-b+sr+Latn/strings.xml +++ b/app/src/main/res/values-b+sr+Latn/strings.xml @@ -53,29 +53,91 @@ Nepoznat javni ključ Loš ključ sesije Javni ključ nije autorizovan - Povezana aplikacija ili samostalni uređaj za slanje poruka. - Uređaj koji ne prosleđuje pakete od drugih uređaja. - Infrastrukturni čvor za proširenje pokrivenosti mreže prosleđivanjem poruka. Vidljiv na listi čvorova. - Kombinacija i RUTERA i KLIJENTA. Nije namenjeno za mobilne uređaje. - Infrastrukturni čvor za proširenje pokrivenosti mreže prosleđivanjem poruka sa minimalnim troškovima energije. Nije vidljiv na listi čvorova. - Emituje GPS pakete položaja kao prioritet. - Emituje telemetrijske pakete kao prioritet. - Optimizovano za komunikaciju u ATAK sistemu, smanjuje rutinske emisije. - Uređaj koji prenosi samo kada je potrebno radi skrivenosti ili uštede energije. - Prenosi lokaciju kao poruku na podrazumevani kanal redovno kako bi pomogao u pronalasku uređaja. - Omogućava autmatske TAK PLI emisije i smanjuje rutinske emisije. - Infrastrukturni čvor koji uvek ponovo prenosi pakete jednom, ali tek nakon svih drugih načina, osiguravajući dodatno pokrivanje za lokalne klastere. Vidljiv u listi čvorova. - Ponovo prenosi svaku primećenu poruku, ako je bila na našem privatnom kanali ili iz druge mreže sa istim LoRA parametrima. - Isto kao ponašanje kod ALL moda, ali preskače dekodiranje paketa i jednostavno ih ponovo prenosi. Dostupno samo u Repeater ulozi. Postavljanje ovoga na bilo koju drugu ulogu rezultovaće ALL ponašanjem. - Ignoriše primećene poruke iz stranih mreža koje su otvorene ili one koje ne može da dekodira. Ponovo prenosi poruku samo na lokalne primarne/sekundarne kanale čvora. - Ignoriše primećene poruke iz stranih mreža kao LOCAL ONLY, ali ide korak dalje tako što takođe ignoriše poruke sa čvorova koji nisu već na listi nepoznatih čvorova. - Dozvoljeno samo za uloge SENSOR, TRACKER, TAK_TRACKER, ovo će onemogućiti sve ponovne prenose, slično kao uloga CLIENT_MUTE. - Ignoriše pakete sa nestandardnim brojevima porta kao što su: TAK, RangeTest, PaxCounter, itd. Ponovo prenosi samo pakete sa standardnim brojevima porta: NodeInfo, Text, Position, Temeletry i Routing. + Клијент + Povezana aplikacija ili samostalni uređaj za slanje poruka. + Клијент мутиран + Uređaj koji ne prosleđuje pakete od drugih uređaja. + Рутер + Infrastrukturni čvor za proširenje pokrivenosti mreže prosleđivanjem poruka. Vidljiv na listi čvorova. + Router Client + Kombinacija i RUTERA i KLIJENTA. Nije namenjeno za mobilne uređaje. + Поновљач + Infrastrukturni čvor za proširenje pokrivenosti mreže prosleđivanjem poruka sa minimalnim troškovima energije. Nije vidljiv na listi čvorova. + Трекер + Emituje GPS pakete položaja kao prioritet. + Сензор + Emituje telemetrijske pakete kao prioritet. + TAK + Optimizovano za komunikaciju u ATAK sistemu, smanjuje rutinske emisije. + Скривени клијент + Uređaj koji prenosi samo kada je potrebno radi skrivenosti ili uštede energije. + Изгубљено и нађено + Prenosi lokaciju kao poruku na podrazumevani kanal redovno kako bi pomogao u pronalasku uređaja. + ТАК Трекер + Omogućava autmatske TAK PLI emisije i smanjuje rutinske emisije. + Рутер са кашњењем + Infrastrukturni čvor koji uvek ponovo prenosi pakete jednom, ali tek nakon svih drugih načina, osiguravajući dodatno pokrivanje za lokalne klastere. Vidljiv u listi čvorova. + Сви + Ponovo prenosi svaku primećenu poruku, ako je bila na našem privatnom kanali ili iz druge mreže sa istim LoRA parametrima. + All Skip Decoding + Isto kao ponašanje kod ALL moda, ali preskače dekodiranje paketa i jednostavno ih ponovo prenosi. Dostupno samo u Repeater ulozi. Postavljanje ovoga na bilo koju drugu ulogu rezultovaće ALL ponašanjem. + Local Only + Ignoriše primećene poruke iz stranih mreža koje su otvorene ili one koje ne može da dekodira. Ponovo prenosi poruku samo na lokalne primarne/sekundarne kanale čvora. + Known Only + Ignoriše primećene poruke iz stranih mreža kao LOCAL ONLY, ali ide korak dalje tako što takođe ignoriše poruke sa čvorova koji nisu već na listi nepoznatih čvorova. + Bez + Dozvoljeno samo za uloge SENSOR, TRACKER, TAK_TRACKER, ovo će onemogućiti sve ponovne prenose, slično kao uloga CLIENT_MUTE. + Core Portnums Only + Ignoriše pakete sa nestandardnim brojevima porta kao što su: TAK, RangeTest, PaxCounter, itd. Ponovo prenosi samo pakete sa standardnim brojevima porta: NodeInfo, Text, Position, Temeletry i Routing. Treniraj dvostruki dodir na podržanim akcelerometrima kao pritisak korisničkog dugmeta. - Onemogućava trostruki pritisak korisničkog dugmeta za uključivanje ili isključivanje GPS-a. - Kontroliše trepćući LED na uređaju. Kod većine uređaja ovo će kontrolisati jedan od do četiri LED-a, punjač i GPS LED-ovi nisu kontrolisani. + Пошаљи позицију на примарном каналу када се корисничко дугме три пута кликне. + Kontroliše trepćući LED na uređaju. Kod većine uređaja ovo će kontrolisati jedan od do četiri LED-a, punjač i GPS LED-ovi nisu kontrolisani. + Временска зона за датуме на екрану уређаја и у евиденцији. Da li bi osim slanja na MQTT i PhoneAPI, naš NeighborInfo trebalo da se prenosi preko LoRa. Nije dostupno na kanalu sa podrazumevanim ključem i imenom. - Javni ključ + Колико дуго екран остаје укључен након притиска корисничког дугмета или пријема порука. + Аутоматски се пребацује на следећу страницу на екрану као карусел, на основу наведеног интервала. + Смер компаса на екрану изван круга увек ће указивати на север. + Flip screen vertically. + Units displayed on the device screen. + Премаши аутоматско откривање OLED екрана. + Override default screen layout. + Bold the heading text on the screen. + Захтева да уређај има акцелерометар. + Регион у коме ћете користити ваше радио уређаје. + Доступна унапред подешена подешавања модема, подразумевана је Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Оперативна фреквенција вашег нода се израчунава на основу региона, модемског пресета и овог поља. Када је 0, слот се аутоматски израчунава на основу назива примарног канала. + Омогућавање ВајФаја ће онемогућити блутут везу са апликацијом. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + Минимална промена растојања у метрима која ће се узети у обзир за паметно емитовање позиције. + Колико често треба да покушамо да добијемо GPS позицију. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Спаваће све што је више могуће, за улогу трагача и сензора ово ће укључивати и лора радио. Не користите ово подешавање ако желите да користите свој уређај са мобилним апликацијама или користите уређај без корисничког дугмета. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Користи се за креирање заједничког кључа са удаљеним уређајем. + The public key authorized to send admin messages to this node. + Уређајем управља администратор мреже, корисник не може да приступи ниједном подешавању уређаја. + Серијска конзола преко Stream API-ја. + Излаз дебаговања уживо преко серијског интерфејса, прегледајте и извозите логове уређаја са редукованим позицијама преко блутута. + + Пакети позиција + Интервал емитовања + Паметно позиционирање + Минимални интервал + Минимум раздаљине + GPS уређај + Фиксна локација + Висина + Интервал ажурирања + Напредне поставке GPS уређаја + GPS пријем GPIO + GPS предаја GPIO + GPS EN GPIO + GPIO + Дебагуј Naziv kanala QR kod ikonica aplikacije @@ -316,7 +378,8 @@ Низак ниво батерије: %s Нотификације о ниском нивоу батерије (омиљени чворови) Барометарски притисак - Mesh via UDP enabled + Омогућено + UDP Broadcast UDP конфигурација Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -394,27 +457,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Подешавања уређаја - Улога - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Подешавања приказа - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Уређај + Улога уређаја + Дугме GPIO + Звучни сигнал GPIO + Режим реемитовања + Интервал емитовања информација о чвору + Двоструки додир као дугме + Троструки клик за Ad Hoc пинг + Временска зона + LED срчани откуцаји + Приказ + Екран укључен за + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Увек усмеравајте на север + Bold Heading + Wake on tap or motion Compass orientation Подешавање спољних обавештења External notification enabled @@ -435,25 +498,27 @@ Nag timeout (seconds) Мелодија звона Use I2S as buzzer - LoRA подешавања - Use modem preset - Modem Preset + LoRA + Опције + Напредно + Користи предефинисано подешавање + Унапред подешено Проток - Spread factor - Coding rate + Фактор ширења + Стопа кодирања Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Регион + Број хопова + Трансмитер укључен + Transmit Power + Фреквенцијски слот Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + Појачање пријемника + Измена фреквенције PA fan disabled Игнориши MQTT - OK to MQTT + Позитиван за MQTT MQTT подешавања MQTT enabled Адреса @@ -470,10 +535,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Конфигурација мреже + Мрежа + Опције вајфаја + Омогућено WiFi enabled SSID PSK + Етернет опције Ethernet enabled NTP server rsyslog server @@ -485,7 +553,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Подешавања позиције + Позиција Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -503,7 +571,9 @@ Position flags Подешавања напајња Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -518,7 +588,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Сигурносна подешавања + Сигурност + Direct Message Key + Admin Keys Javni ključ Privatni ključ Admin Key @@ -790,4 +862,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-bg-rBG/strings.xml b/app/src/main/res/values-bg-rBG/strings.xml index 7fb039907..2f293198e 100644 --- a/app/src/main/res/values-bg-rBG/strings.xml +++ b/app/src/main/res/values-bg-rBG/strings.xml @@ -53,29 +53,91 @@ Неизвестен публичен ключ Невалиден ключ за сесия Публичният ключ е неоторизиран - Свързано с приложение или самостоятелно устройство за съобщения. - Устройство, което не препредава пакети от други устройства. - Инфраструктурен възел за разширяване на мрежовото покритие чрез препредаване на съобщения. Вижда се в списъка с възли. - Комбинация от РУТЕР и КЛИЕНТ. Не е за мобилни устройства. - Инфраструктурен възел за разширяване на мрежовото покритие чрез препредаване на съобщения с минимални разходи. Не се вижда в списъка с възли. - Излъчва приоритетно пакети за GPS позиция - Излъчва приоритетно телеметрични пакети. - Optimized for ATAK system communication, reduces routine broadcasts. - Device that only broadcasts as needed for stealth or power savings. - Broadcasts location as message to default channel regularly for to assist with device recovery. - Enables automatic TAK PLI broadcasts and reduces routine broadcasts. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. - Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. - Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + Свързано с приложение или самостоятелно устройство за съобщения. + Client Mute + Устройство, което не препредава пакети от други устройства.фигурир + Router + Инфраструктурен възел за разширяване на мрежовото покритие чрез препредаване на съобщения. Вижда се в списъка с възли. + Router Client + Комбинация от РУТЕР и КЛИЕНТ. Не е за мобилни устройства. + Repeater + Инфраструктурен възел за разширяване на мрежовото покритие чрез препредаване на съобщения с минимални разходи. Не се вижда в списъка с възли. + Tracker + Излъчва приоритетно пакети за GPS позиция + Sensor + Излъчва приоритетно телеметрични пакети. + TAK + Optimized for ATAK system communication, reduces routine broadcasts. + Client Hidden + Device that only broadcasts as needed for stealth or power savings. + Lost and Found + Broadcasts location as message to default channel regularly for to assist with device recovery. + TAK Tracker + Enables automatic TAK PLI broadcasts and reduces routine broadcasts. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + Всички + Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. + All Skip Decoding + Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. + Няма + Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. + Core Portnums Only + Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. - Дезактивира трикратното натискане на потребителския бутон за активиране или дезактивиране на GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Публичен ключ + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Фиксирана позиция + Надморска височина + Интервал на актуализиране + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Отстраняване на грешки Име на канал QR код икона на приложението @@ -314,7 +376,8 @@ Батерията е изтощена: %s Известия за изтощена батерия (любими възли) Барометрично налягане - Активирана Mesh чрез UDP + Активиран + UDP Broadcast Конфигуриране на UDP Последно чут: %2$s
Последна позиция: %3$s
Батерия: %4$s]]> Toggle my position @@ -392,27 +455,27 @@ GPIO pin to monitor Detection trigger type Използване на режим INPUT_PULLUP - Конфигуриране на устройството - Роля - Предефиниране на PIN_BUTTON - Предефиниране на PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Дезактивиране на трикратното щракване - POSIX часова зона - Disable LED heartbeat - Конфигуриране на дисплея - Време за изключване на екрана (секунди) - Формат на GPS координатите - Автоматична смяна на екрана (секунди) + Устройство + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Дисплей + Screen on for + Carousel interval Север на компаса отгоре Обръщане на екрана Показвани единици - Override OLED auto-detect + OLED type Режим на дисплея - Удебелено заглавие - Събуждане на екрана при докосване или движение + Always point north + Bold Heading + Wake on tap or motion Ориентация на компаса Конфигуриране за външни известия Външните известия са активирани @@ -433,25 +496,27 @@ Nag timeout (seconds) Тон на звънене Use I2S as buzzer - Конфигуриране на LoRa - Използване на предварително зададени настройки на модема - Предварително настроен модем + LoRa + Options + Разширени + Използване на предварително зададени настройки + Presets Широчина на честотната лента - Spread factor - Coding rate + Spread Factor + Coding Rate Отместване на честотата (MHz) - Регион (честотен план) - Лимит на хопове - TX е активирано - TX мощност (dBm) + Регион + Брой хопове + Предаването е активирано + Мощност на предаване Честотен слот Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Игнориране на MQTT - OK to MQTT + Ok to MQTT Конфигуриране на MQTT MQTT е активиран Адрес @@ -468,10 +533,13 @@ Neighbor Info enabled Интервал на актуализиране (секунди) Предаване през LoRa - Конфигуриране на мрежата + Мрежа + WiFi Options + Активиран Wi-Fi е активиран SSID PSK + Ethernet Options Ethernet е активиран NTP сървър rsyslog сървър @@ -483,7 +551,7 @@ Paxcounter е активиран Праг на WiFi RSSI (по подразбиране -80) Праг на BLE RSSI (по подразбиране -80) - Конфигуриране на позицията + Позиция Интервал на излъчване на позицията (секунди) Smart position enabled Smart broadcast minimum distance (meters) @@ -501,7 +569,9 @@ Position flags Конфигуриране на захранването Активиране на енергоспестяващ режим + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -516,7 +586,9 @@ Отдалечен хардуер е активиран Allow undefined pin access Налични пинове - Конфигуриране на сигурността + Сигурност + Direct Message Key + Admin Keys Публичен ключ Частен ключ Администраторски ключ @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-ca-rES/strings.xml b/app/src/main/res/values-ca-rES/strings.xml index eb971ef95..4c431a836 100644 --- a/app/src/main/res/values-ca-rES/strings.xml +++ b/app/src/main/res/values-ca-rES/strings.xml @@ -53,29 +53,91 @@ Clau Pública Desconeguda Clau de sessió incorrecta Clau Pública no autoritzada - Dispositiu de missatgeria, connectat o autònom. - Dispositiu sense reenviament de paquets. - Node d’infraestructura per ampliar cobertura. Apareix a la llista de nodes. - Combinació ROUTER + CLIENT. No mòbils. - Node d’infraestructura per ampliar cobertura amb mínima càrrega. Ocult a la llista de nodes. - Difon paquets de posició GPS com a prioritat - Difon telemetria com a prioritat - Optimitzat per sistema ATAK, redueix les rutines de difusió. - Dispositiu que només difon quan cal, per discreció o estalvi d’energia. - Difon regularment la ubicació com a missatge al canal per defecte per ajudar a recuperar el dispositiu. - Activa les difusions automàtiques TAK PLI i redueix les difusions rutinàries. - Node d’infraestructura que sempre reenvia els paquets una vegada però només després de tots els altres modes, assegurant cobertura addicional per a clusters locals. Visible a la llista de nodes. - Reenvia qualsevol missatge observat si era al nostre canal privat o d’una altra malla. - .Mateix comportament que ALL, però sense decodificar paquets, només els reenvia. Només disponible en rol de Repeater. Configurar-ho en qualsevol altre rol resultarà en el comportament ALL. - Ignora els missatges observats de malles externes obertes o que no pot desxifrar. Només reenvia missatges als canals primari/secundari locals del node. - Ignora els missatges observats de malles externes com LOCAL ONLY, però va més enllà i també ignora missatges de nodes que no figuren a la llista de nodes coneguts del node. - Només permès per als rols SENSOR, TRACKER i TAK_TRACKER; això inhibirà tots els reenviaments, de manera similar al rol CLIENT_MUTE. - Ignora paquets amb ports no estàndard com: TAK, RangeTest, PaxCounter, etc. Només reenvia paquets amb ports estàndard: NodeInfo, Text, Position, Telemetry i Routing. + Client + Dispositiu de missatgeria, connectat o autònom. + Client Mute + Dispositiu sense reenviament de paquets. + Router + Node d’infraestructura per ampliar cobertura. Apareix a la llista de nodes. + Router Client + Combinació ROUTER + CLIENT. No mòbils. + Repeater + Node d’infraestructura per ampliar cobertura amb mínima càrrega. Ocult a la llista de nodes. + Tracker + Difon paquets de posició GPS com a prioritat + Sensor + Difon telemetria com a prioritat + TAK + Optimitzat per sistema ATAK, redueix les rutines de difusió. + Client Hidden + Dispositiu que només difon quan cal, per discreció o estalvi d’energia. + Lost and Found + Difon regularment la ubicació com a missatge al canal per defecte per ajudar a recuperar el dispositiu. + TAK Tracker + Activa les difusions automàtiques TAK PLI i redueix les difusions rutinàries. + Router Late + Node d’infraestructura que sempre reenvia els paquets una vegada però només després de tots els altres modes, assegurant cobertura addicional per a clusters locals. Visible a la llista de nodes. + All + Reenvia qualsevol missatge observat si era al nostre canal privat o d’una altra malla. + All Skip Decoding + .Mateix comportament que ALL, però sense decodificar paquets, només els reenvia. Només disponible en rol de Repeater. Configurar-ho en qualsevol altre rol resultarà en el comportament ALL. + Local Only + Ignora els missatges observats de malles externes obertes o que no pot desxifrar. Només reenvia missatges als canals primari/secundari locals del node. + Known Only + Ignora els missatges observats de malles externes com LOCAL ONLY, però va més enllà i també ignora missatges de nodes que no figuren a la llista de nodes coneguts del node. + None + Només permès per als rols SENSOR, TRACKER i TAK_TRACKER; això inhibirà tots els reenviaments, de manera similar al rol CLIENT_MUTE. + Core Portnums Only + Ignora paquets amb ports no estàndard com: TAK, RangeTest, PaxCounter, etc. Només reenvia paquets amb ports estàndard: NodeInfo, Text, Position, Telemetry i Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Nom del canal Codi QR icona de l\'aplicació @@ -314,7 +376,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -392,27 +455,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -433,25 +496,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Regió + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -468,10 +533,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -483,7 +551,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -501,7 +569,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -516,7 +586,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Public Key Private Key Admin Key @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-cs-rCZ/strings.xml b/app/src/main/res/values-cs-rCZ/strings.xml index e12568699..45e8a45bb 100644 --- a/app/src/main/res/values-cs-rCZ/strings.xml +++ b/app/src/main/res/values-cs-rCZ/strings.xml @@ -53,29 +53,91 @@ Neznámý veřejný klíč Špatný klíč relace Veřejný klíč není autorizován - Připojená aplikace nebo nezávislé zařízení. - Zařízení, které nepřeposílá pakety ostatních zařízení. - Uzel infrastruktury pro rozšíření pokrytí sítě přeposíláním zpráv. Viditelné v seznamu uzlů. - Kombinace ROUTER a CLIENT. Ne u mobilních zařízení. - Uzel infrastruktury pro rozšíření pokrytí sítě přenosem zpráv s minimální režií. Není viditelné v seznamu uzlů. - Prioritně vysílá pakety s pozicí GPS. - Prioritně vysílá pakety s telemetrií. - Optimalizované pro systémy komunikace ATAK, snižuje rutinní vysílání. - Zařízení, které vysílá pouze podle potřeby pro utajení nebo úsporu energie. - Pravidelně vysílá polohu jako zprávu do výchozího kanálu a pomáhá tak při hledání ztraceného zařízení. - Povolí automatické vysílání TAK PLI a snižuje běžné vysílání. - Infrastrukturní uzel, který vždy jednou zopakuje pakety, ale až po všech ostatních režimech, čímž zajišťuje lepší pokrytí místních clusterů. Je viditelný v seznamu uzlů. - Znovu odeslat jakoukoli pozorovanou zprávu, pokud byla na našem soukromém kanálu nebo z jiné sítě se stejnými parametry lory. - Stejné chování jako ALL, ale přeskočí dekódování paketů a jednoduše je znovu vysílá. Dostupné pouze v roli Repeater. Nastavení této možnosti pro jiné role povede k chování jako u ALL. - Ignoruje přijaté zprávy z cizích mesh sítí, které jsou otevřené nebo které nelze dešifrovat. Opakuje pouze zprávy na primárních / sekundárních kanálech místního uzlu. - Ignoruje přijaté zprávy z cizích mesh sítí, jako je LOCAL ONLY, ale jde ještě o krok dál tím, že také ignoruje zprávy od uzlů, které již nejsou v seznamu známých uzlů daného uzlu. - Povoleno pouze pro role SENSOR, TRACKER a TAK_TRACKER. Toto nastavení zabrání všem opakovaným vysíláním, podobně jako role CLIENT_MUTE. - Ignoruje pakety z nestandardních portů, jako jsou: TAK, RangeTest, PaxCounter atd. Opakuje pouze pakety se standardními porty: NodeInfo, Text, Position, Telemetry a Routing. + Client + Připojená aplikace nebo nezávislé zařízení. + Client Mute + Zařízení, které nepřeposílá pakety ostatních zařízení. + Router + Uzel infrastruktury pro rozšíření pokrytí sítě přeposíláním zpráv. Viditelné v seznamu uzlů. + Router Client + Kombinace ROUTER a CLIENT. Ne u mobilních zařízení. + Repeater + Uzel infrastruktury pro rozšíření pokrytí sítě přenosem zpráv s minimální režií. Není viditelné v seznamu uzlů. + Tracker + Prioritně vysílá pakety s pozicí GPS. + Senzor + Prioritně vysílá pakety s telemetrií. + TAK + Optimalizované pro systémy komunikace ATAK, snižuje rutinní vysílání. + Client Hidden + Zařízení, které vysílá pouze podle potřeby pro utajení nebo úsporu energie. + Lost and Found + Pravidelně vysílá polohu jako zprávu do výchozího kanálu a pomáhá tak při hledání ztraceného zařízení. + TAK Tracker + Povolí automatické vysílání TAK PLI a snižuje běžné vysílání. + Router Late + Uzel infrastruktury, který vždy jednou zopakuje pakety, ale až po všech ostatních režimech, čímž zajišťuje lepší pokrytí místních clusterů. Je viditelný v seznamu uzlů. + All + Znovu odeslat jakoukoli pozorovanou zprávu, pokud byla na našem soukromém kanálu nebo z jiné sítě se stejnými parametry lory. + All Skip Decoding + Stejné chování jako ALL, ale přeskočí dekódování paketů a jednoduše je znovu vysílá. Dostupné pouze v roli Repeater. Nastavení této možnosti pro jiné role povede k chování jako u ALL. + Local Only + Ignoruje přijaté zprávy z cizích mesh sítí, které jsou otevřené nebo které nelze dešifrovat. Opakuje pouze zprávy na primárních / sekundárních kanálech místního uzlu. + Known Only + Ignoruje přijaté zprávy z cizích mesh sítí, jako je LOCAL ONLY, ale jde ještě o krok dál tím, že také ignoruje zprávy od uzlů, které již nejsou v seznamu známých uzlů daného uzlu. + Žádný + Povoleno pouze pro role SENSOR, TRACKER a TAK_TRACKER. Toto nastavení zabrání všem opakovaným vysíláním, podobně jako role CLIENT_MUTE. + Core Portnums Only + Ignoruje pakety z nestandardních portů, jako jsou: TAK, RangeTest, PaxCounter atd. Opakuje pouze pakety se standardními porty: NodeInfo, Text, Position, Telemetry a Routing. Zachází s dvojitým poklepáním na podporovaných akcelerometrech jako se stisknutím uživatelského tlačítka. - Zakáže funkci trojnásobného stisknutí uživatelského tlačítka pro zapnutí nebo vypnutí GPS. - Nastavuje blikání LED diody na zařízení. U většiny zařízení lze ovládat jednu ze čtyř LED diod, avšak LED diody nabíječky a GPS nelze ovládat. + Send a position on the primary channel when the user button is triple clicked. + Nastavuje blikání LED diody na zařízení. U většiny zařízení lze ovládat jednu ze čtyř LED diod, avšak LED diody nabíječky a GPS nelze ovládat. + Time zone for dates on the device screen and log. Umožní odesílat informace o sousedních uzlech (NeighborInfo) nejen do MQTT a PhoneAPI, ale také přes LoRa. Nedostupné na kanálech s výchozím klíčem a názvem. - Veřejný klíč + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Název kanálu QR kód Ikona aplikace @@ -318,7 +380,8 @@ Nízký stav baterie: %s Upozornění na nízký stav baterie (oblíbené uzly) Barometrický tlak - Povoleno posílání přes UDP + Povoleno + UDP Broadcast UDP Konfigurace Naposledy slyšen: %2$s
Poslední pozice: %3$s
Baterie: %4$s]]> Zapnout/vypnout pozici @@ -396,27 +459,27 @@ GPIO pin ke sledování Typ spouštění detekce Použít INPUT_PULLUP režim - Nastavení zařízení - Role - Předefinovat PIN_TLACITKO - Předefinovat PIN_BZUCAK + Zařízení + Role zařízení + Button GPIO + Buzzer GPIO Režim opětovného vysílání - Interval vysílání NodeInfo (v sekundách) - Dvojité klepnutí jako stisk tlačítka - Zakázat trojkliknutí - POSIX časové pásmo - Deaktivovat signalizaci stavu pomocí LED - Nastavení zobrazení - Časový limit obrazovky (v sekundách) - Formát souřadnic GPS - Automatické přepínání obrazovek (v sekundách) + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Obrazovka + Screen on for + Carousel interval Zobrazit sever kompasu nahoře Překlopit obrazovku Zobrazení jednotek - Přepsat automatické rozpoznání OLED + OLED type Režim obrazovky - Nadpis tučně - Probudit obrazovku při klepnutí nebo pohybu + Always point north + Bold Heading + Wake on tap or motion Orientace kompasu Nastavení externího oznámení Externí oznámení povoleno @@ -437,25 +500,27 @@ Interval opakovaného zvonění (v sekundách) Vyzváněcí tón Použít I2S jako bzučák - LoRa nastavení - Použít předvolbu modemu - Předvolba modemu + LoRa + Options + Advanced + Use Preset + Presets Šířka pásma - Spread factor - Coding rate + Spread Factor + Coding Rate Posun frekvence (MHz) - Region (plán frekvence) - Limit skoku - TX povoleno - Výkon TX (dBm) - Frekvenční slot + Region + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Přepsat střídu Ignorovat příchozí - SX126X RX zesílený zisk - Přepsat frekvenci (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignorovat MQTT - OK do MQTT + Ok to MQTT Nastavení MQTT MQTT povoleno Adresa @@ -472,10 +537,13 @@ Informace o sousedech povoleny Interval aktualizace (v sekundách) Přenos přes LoRa - Nastavení sítě + Síť + WiFi Options + Povoleno WiFi povoleno SSID PSK + Ethernet Options Ethernet povolen NTP server rsyslog server @@ -487,7 +555,7 @@ Paxcounter enabled Práh WiFi RSSI (výchozí hodnota -80) Práh BLE RSSI (výchozí hodnota -80) - Nastavení pozice + Pozice Interval vysílání pozice (v sekundách) Chytrá pozice povolena Minimální vzdálenost pro inteligentní vysílání (v metrech) @@ -505,7 +573,9 @@ Příznaky pozice Nastavení napájení Povolit úsporný režim + Shutdown on power loss Interval vypnutí při napájení z baterie (sekundy) + ADC multiplier override Vlastní hodnota násobiče pro ADC Čekat na Bluetooth (sekundy) Trvání super hlubokého spánku (sekundy) @@ -520,7 +590,9 @@ Vzdálený modul povolen Povolit přiřazení nedefinovaného pinu Dostupné piny - Nastavení zabezpečení + Zabezpečení + Direct Message Key + Admin Keys Veřejný klíč Soukromý klíč Administrátorský klíč @@ -789,4 +861,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-de-rDE/strings.xml b/app/src/main/res/values-de-rDE/strings.xml index f0d7b3b4c..b6568ddb0 100644 --- a/app/src/main/res/values-de-rDE/strings.xml +++ b/app/src/main/res/values-de-rDE/strings.xml @@ -53,29 +53,91 @@ Unbekannter öffentlicher Schlüssel Fehlerhafter Sitzungsschlüssel Öffentlicher Schlüssel nicht autorisiert - Mit der App verbundenes oder eigenständiges Messaging-Gerät. - Gerät, welches keine Pakete von anderen Geräten weiterleitet. - Node zur Erweiterung der Netzabdeckung durch Weiterleiten von Nachrichten. In Knotenliste sichtbar. - Kombination von ROUTER und CLIENT. Nicht für mobile Endgeräte. - Infrastrukturknoten zur Erweiterung der Netzabdeckung durch Weiterleitung von Nachrichten mit minimalem Overhead. In der Knotenliste nicht sichtbar. - GPS-Positionspakete mit Priorität gesendet. - Telemetrie-Pakete mit Priorität gesendet. - Optimiert für Kommunikation des ATAK Systems, reduziert Routineübertragungen. - Gerät, das nur bei Bedarf sendet, um sich zu tarnen oder Strom zu sparen. - Sendet den Standort regelmäßig als Nachricht an den Standardkanal, um bei der Wiederherstellung des Geräts zu helfen. - Aktiviert automatische TAK PLI Übertragungen und reduziert Routineübertragungen. - Infrastruktur-Node, der Pakete immer einmal erneut sendet, jedoch erst, nachdem alle anderen Modi durchlaufen wurden, um zusätzliche Abdeckung für lokale Cluster sicherzustellen. Sichtbar in der Node-Liste. - Sende jede beobachtete Nachricht erneut aus, ob sie auf unserem privaten Kanal oder von einem anderen Netz mit den gleichen lora-Parametern stammt. - Das gleiche Verhalten wie ALLE aber überspringt die Paketdekodierung und sendet sie einfach erneut. Nur in Repeater Rolle verfügbar. Wenn Sie diese auf jede andere Rolle setzen, wird ALLE Verhaltensweisen folgen. - Ignoriert beobachtete Nachrichten aus fremden Netzen, die offen sind oder die, die nicht entschlüsselt werden können. Sendet nur die Nachricht auf den Knoten lokalen primären / sekundären Kanälen. - Ignoriert beobachtete Nachrichten von fremden Meshes wie bei LOCAL ONLY, geht jedoch einen Schritt weiter, indem auch Nachrichten von Nodes ignoriert werden, die nicht bereits in der bekannten Liste der Nodes enthalten sind. - Dies ist nur für SENSOR, TRACKER und TAK_TRACKER zulässig. Dies verhindert alle Übertragungen, nicht anders als CLIENT_MUTE Rolle. - Ignoriert Pakete von nicht standardmäßigen portnums wie: TAK, Range Test, PaxCounter, etc. Sendet nur Pakete mit Standardportnums: NodeInfo, Text, Position, Telemetrie und Routing erneut. + Client + Mit der App verbundenes oder eigenständiges Messaging-Gerät. + Client Mute + Gerät, das keine Pakete von anderen Geräten weiterleitet. + Router + Knoten zur Erweiterung der Netzabdeckung durch Weiterleiten von Nachrichten. In Knotenliste sichtbar. + Router Client + Kombination von ROUTER und CLIENT. Nicht für mobile Endgeräte. + Repeater + Infrastrukturknoten zur Erweiterung der Netzabdeckung durch Weiterleitung von Nachrichten mit minimalem Overhead. In der Knotenliste nicht sichtbar. + Tracker + GPS Standortnachricht mit Priorität gesendet. + Sensor + Telemetrienachricht mit Priorität gesendet. + TAK + Optimiert für ATAK-Systemkommunikation, verringert die Anzahl der Routineübertragungen. + Client - Versteckt + Gerät, das nur bei Bedarf sendet, um nicht entdeckt zu werden oder Strom zu sparen. + Tracker + Sendet den Standort regelmäßig als Nachricht an den Standardkanal, um das Gerät wiederzufinden. + TAK Tracker + Aktiviert automatische TAK-PLI-Übertragungen und verringert die Anzahl der Routineübertragungen. + Router mit Verzögerung + Infrastruktur-Node, der Pakete immer einmal erneut sendet, jedoch erst, nachdem alle anderen Modi durchlaufen wurden, um zusätzliche Abdeckung für lokale Cluster sicherzustellen. Sichtbar in der Node-Liste. + Alle + Sende jede empfangene Nachricht erneut aus, egal ob sie auf einem privaten Kanal oder von einem anderen Mesh mit den gleichen LoRa Parametern stammt. + All Skip Decoding + Das gleiche Verhalten wie ALLE aber überspringt die Paketdekodierung und sendet sie einfach erneut. Nur in Repeater Rolle verfügbar. Wenn Sie diese auf jede andere Rolle setzen, wird ALLE Verhaltensweisen folgen. + Nur lokal + Ignoriert beobachtete Nachrichten aus fremden Netzen, die offen sind oder die, die nicht entschlüsselt werden können. Sendet nur die Nachricht auf den Knoten lokalen primären / sekundären Kanälen. + Known Only + Ignoriert beobachtete Nachrichten von fremden Meshes wie bei LOCAL ONLY, geht jedoch einen Schritt weiter, indem auch Nachrichten von Nodes ignoriert werden, die nicht bereits in der bekannten Liste der Nodes enthalten sind. + Keins + Nur für SENSOR, TRACKER und TAK_TRACKER zulässig. Verhindert alle Übertragungen, nicht anders als CLIENT_MUTE Rolle. + Core Portnums Only + Ignoriert Nachrichten von nicht standardmäßigen Anschlussnummern wie: TAK, Range Test, Besucherzähler, etc. Sendet nur Nachrichten wie: Knoteninfo, Text, Standort, Telemetrie und Weiterleitung erneut. Behandle Doppeltippen auf unterstützten Beschleunigungssensoren wie einen Benutzer-Tastendruck. - Deaktiviert das dreifache Drücken der Benutzertaste zum Aktivieren oder Deaktivieren des GPS. - Steuert die blinkende LED auf dem Gerät. Bei den meisten Geräten wird damit eine von bis zu 4 LEDs gesteuert, die Lade- und GPS-LEDs sind jedoch nicht steuerbar. + Send a position on the primary channel when the user button is triple clicked. + Steuert die blinkende LED auf dem Gerät. Bei den meisten Geräten wird damit eine von bis zu 4 LEDs gesteuert, nicht jedoch die LEDS zum Laden und für das GPS. + Zeitzone für Daten auf dem Gerätebildschirm und Log. Ob unsere Nachbarinformation zusätzlich zum Senden an MQTT und die Phone-API auch über LoRa übertragen werden soll. Nicht verfügbar auf einem Kanal mit Standardschlüssel und -name. - Öffentlicher Schlüssel + Wie lange die Anzeige eingeschaltet bleibt, nachdem die Benutzertaste gedrückt oder Nachrichten empfangen wurden. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serielle Konsole über die Stream-API. + Ausgabe von Echtzeit-Fehlersuchprotokollen über die serielle Schnittstelle, Anzeige und Export von positionskorrigierten Geräteprotokollen über Bluetooth. + + Standortnachricht + Übertragungsintervall + Smart Position + Minimum Intervall + Minimum Distanz + Geräte-GPS + Fester Standort + Höhe + Aktualisierungsintervall + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Kanalname QR-Code Anwendungssymbol @@ -314,7 +376,8 @@ Leere Batterie: %s Akkustands Warnung (für Favoriten) Luftdruck - Mesh über UDP ermöglichen + Aktiviert + UDP Broadcast UDP Konfiguration Zuletzt gehört:%2$s
Letzte Position:%3$s
Akku:%4$s]]> Position einschalten @@ -392,27 +455,27 @@ Zu überwachender GPIO-Pin Typ der Erkennungsauslösung Eingang PULLUP Einstellung - Geräteeinstellungen - Rolle - PIN_BUTTON neu definieren - PIN-SUMMER neu definieren - Übertragungsmodus - NodeInfo Übertragungsintervall (Sekunden) - Doppeltes Tippen als Knopfdruck - Dreifachklicken deaktivieren - POSIX Zeitzone - Heartbeat-LED deaktivieren - Anzeigeeinstellungen - Bildschirm Timeout (Sekunden) - GPS Koordinatenformat - Auto Bildschirmwechsel (Sekunden) + Gerät + Geräterolle + Button GPIO + Buzzer GPIO + Weiterleitungsmodus + Knoteninfo Übertragungsintervall + Double Tap as Button + Triple Click Ad Hoc Ping + Zeitzone + LED Heartbeat + Anzeige + Screen on for + Carousel interval Kompass Norden oben Bildschirm spiegeln Anzeigeeinheiten - OLED automatische Erkennung überschreiben + OLED type Anzeigemodus - Überschrift fett - Bildschirm bei Tippen oder Bewegung aufwecken + Immer nach Norden zeigen + Fette Überschrift + Wake on tap or motion Kompassausrichtung Einstellungen für externe Benachrichtigungen Externe Benachrichtigungen aktiviert @@ -433,25 +496,27 @@ Nervige Verzögerung (Sekunden) Klingelton I2S als Buzzer verwenden - LoRa Einstellungen - Modem Vorlage verwenden - Modem Voreinstellungen + LoRa + Optionen + Fortgeschritten + Voreinstellung verwenden + Voreinstellungen Bandbreite Spreizfaktor Fehlerkorrektur Frequenzversatz (MHz) - Region (Frequenzplan) - Sprung-Limit - TX aktiviert - TX-Leistung (dBm) - Frequenz Slot + Region + Anzahl Hops + Senden aktiviert + Sendeleistung + Frequenzschlitz Duty-Cycle überschreiben Eingehende ignorieren - SX126X RX verbesserter gain - Überschreibe Frequenz (MHz) + RX Boosted Gain + Frequency Override PA Fan deaktiviert MQTT ignorieren - OK für MQTT + Ok to MQTT MQTT Einstellungen MQTT aktiviert Adresse @@ -468,10 +533,13 @@ Nachbarinformationen aktiviert Aktualisierungsintervall (Sekunden) Übertragen über LoRa - Netzwerkeinstellungen + Netzwerk + WiFi Optionen + Aktiviert WiFi aktiviert SSID PSK + Ethernet Options Ethernet aktiviert NTP Server rsyslog Server @@ -483,7 +551,7 @@ Pax Zähler aktiviert WiFi RSSI Schwellenwert (Standard -80) BLE RSSI Schwellenwert (Standard -80) - Positionseinstellungen + Standort Position Übertragungsintervall (Sekunden) Intelligente Position aktiviert Intelligente Position Minimum Distanz (Meter) @@ -501,7 +569,9 @@ Standort Optionen Power Konfiguration Energiesparmodus aktivieren + Shutdown on power loss Verzögerung zum Herunterfahren bei Akkubetrieb (Sekunden) + ADC multiplier override ADC Multiplikator Überschreibungsverhältnis Warte auf Bluetooth (Sekunden) Supertiefeschlaf (Sekunden) @@ -516,7 +586,9 @@ Entfernte Geräteeinstellungen Erlaube undefinierten Pin-Zugriff Verfügbare Pins - Sicherheitseinstellungen + Sicherheit + Direct Message Key + Admin Keys Öffentlicher Schlüssel Privater Schlüssel Adminschlüssel @@ -788,4 +860,5 @@ Nachrichten von einem öffentlichen Internet Gateway werden an das lokale Mesh weitergeleitet. Aufgrund der Nullsprungrichtlinie wird der Datenverkehr vom MQTT Standardserver nicht über dieses Gerät hinaus weitergeleitet. Symbolbedeutung Durch Deaktivieren des Standortes auf dem primären Kanal werden regelmäßige Standortübertragungen auf dem ersten sekundären Kanal mit aktiviertem Standort ermöglicht, andernfalls ist eine manuelle Standortanforderung erforderlich. + Device configuration diff --git a/app/src/main/res/values-el-rGR/strings.xml b/app/src/main/res/values-el-rGR/strings.xml index 359bdd22e..7260d5751 100644 --- a/app/src/main/res/values-el-rGR/strings.xml +++ b/app/src/main/res/values-el-rGR/strings.xml @@ -53,29 +53,91 @@ Άγνωστο Δημόσιο Κλειδί Bad session key Public Key unauthorized - App connected or standalone messaging device. - Device that does not forward packets from other devices. - Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. - Combination of both ROUTER and CLIENT. Not for mobile devices. - Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. - Broadcasts GPS position packets as priority. - Broadcasts telemetry packets as priority. - Optimized for ATAK system communication, reduces routine broadcasts. - Device that only broadcasts as needed for stealth or power savings. - Broadcasts location as message to default channel regularly for to assist with device recovery. - Enables automatic TAK PLI broadcasts and reduces routine broadcasts. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. - Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. - Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + App connected or standalone messaging device. + Client Mute + Device that does not forward packets from other devices. + Router + Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. + Router Client + Combination of both ROUTER and CLIENT. Not for mobile devices. + Repeater + Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. + Tracker + Broadcasts GPS position packets as priority. + Sensor + Broadcasts telemetry packets as priority. + TAK + Optimized for ATAK system communication, reduces routine broadcasts. + Client Hidden + Device that only broadcasts as needed for stealth or power savings. + Lost and Found + Broadcasts location as message to default channel regularly for to assist with device recovery. + TAK Tracker + Enables automatic TAK PLI broadcasts and reduces routine broadcasts. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. + All Skip Decoding + Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. + None + Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. + Core Portnums Only + Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Δημόσιο Κλειδί + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Όνομα Καναλιού Κώδικας QR εικονίδιο εφαρμογής @@ -314,7 +376,8 @@ Low battery: %s Low battery notifications (favorite nodes) Βαρομετρική Πίεση - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -392,27 +455,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Συσκευή + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Οθόνη + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -433,25 +496,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Περιφέρεια + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Διεύθυνση @@ -468,10 +533,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Δίκτυο + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -483,7 +551,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Τοποθεσία Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -501,7 +569,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -516,7 +586,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Ασφάλεια + Direct Message Key + Admin Keys Δημόσιο Κλειδί Ιδιωτικό Κλειδί Admin Key @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-es-rES/strings.xml b/app/src/main/res/values-es-rES/strings.xml index 1226d84fd..dd3c5f9c5 100644 --- a/app/src/main/res/values-es-rES/strings.xml +++ b/app/src/main/res/values-es-rES/strings.xml @@ -53,29 +53,91 @@ Clave pública desconocida Mala clave de sesión Clave pública no autorizada - Aplicación conectada o dispositivo de mensajería autónomo. - El dispositivo no reenvía mensajes de otros dispositivos. - Nodo de infraestructura para ampliar la cobertura de la red mediante la retransmisión de mensajes. Visible en la lista de nodos. - Combinación de ROUTER y CLIENTE. No para dispositivos móviles. - Nodo de infraestructura para ampliar la cobertura de la red mediante la retransmisión de mensajes. Visible en la lista de nodos. - Transmisión de paquetes de posición GPS como prioridad. - Transmite paquetes de telemetría como prioridad. - Optimizado para el sistema de comunicación ATAK, reduciendo las transmisiones rutinarias. - Dispositivo que solo emite según sea necesario por sigilo o para ahorrar energía. - Transmite regularmente la ubicación como mensaje al canal predeterminado para asistir en la recuperación del dispositivo. - Permite la transmisión automática TAK PLI y reduce las transmisiones rutinarias. - Nodo de infraestructura que permite la retransmisión de paquetes una vez posterior a los demás modos, asegurando cobertura adicional a los grupos locales. Es visible en la lista de nodos. - Si está en nuestro canal privado o desde otra red con los mismos parámetros lora, retransmite cualquier mensaje observado. - Igual al comportamiento que TODOS pero omite la decodificación de paquetes y simplemente los retransmite. Sólo disponible en el rol repetidor. Establecer esto en cualquier otro rol dará como resultado TODOS los comportamientos. - Ignora mensajes observados desde mallas foráneas que están abiertas o que no pueden descifrar. Solo retransmite mensajes en los nodos locales principales / canales secundarios. - Ignora los mensajes recibidos de redes externas como LOCAL ONLY, pero ignora también mensajes de nodos que no están ya en la lista de nodos conocidos. - Solo permitido para los roles SENSOR, TRACKER y TAK_TRACKER, esto inhibirá todas las retransmisiones, no a diferencia del rol de CLIENT_MUTE. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + Aplicación conectada o dispositivo de mensajería autónomo. + Client Mute + El dispositivo no reenvía mensajes de otros dispositivos. + Router + Nodo de infraestructura para ampliar la cobertura de la red mediante la retransmisión de mensajes. Visible en la lista de nodos. + Router Client + Combinación de ROUTER y CLIENTE. No para dispositivos móviles. + Repeater + Un nodo que es parte de infraestructura para extender el rango de esta misma, reemitiendo mensajes de nodos con poco alcance. No aparecerá en la lista de nodos visibles. + Tracker + Transmisión de paquetes de posición GPS como prioridad. + Sensor + Transmite paquetes de telemetría como prioridad. + TAK + Optimizado para el sistema de comunicación ATAK, reduciendo las transmisiones rutinarias. + Client Hidden + Dispositivo que solo emite según sea necesario por sigilo o para ahorrar energía. + Lost and Found + Transmite regularmente la ubicación como mensaje al canal predeterminado para asistir en la recuperación del dispositivo. + TAK Tracker + Permite la transmisión automática TAK PLI y reduce las transmisiones rutinarias. + Router Late + Nodo de infraestructura que permite la retransmisión de paquetes una vez posterior a los demás modos, asegurando cobertura adicional a los grupos locales. Es visible en la lista de nodos. + Todos + Si está en nuestro canal privado o desde otra red con los mismos parámetros lora, retransmite cualquier mensaje observado. + All Skip Decoding + Igual al comportamiento que TODOS pero omite la decodificación de paquetes y simplemente los retransmite. Sólo disponible en el rol repetidor. Establecer esto en cualquier otro rol dará como resultado TODOS los comportamientos. + Local Only + Ignora mensajes observados desde mallas foráneas que están abiertas o que no pueden descifrar. Solo retransmite mensajes en los nodos locales principales / canales secundarios. + Known Only + Ignora los mensajes recibidos de redes externas como LOCAL ONLY, pero ignora también mensajes de nodos que no están ya en la lista de nodos conocidos. + Ninguna + Solo permitido para los roles SENSOR, TRACKER y TAK_TRACKER, esto inhibirá todas las retransmisiones, no a diferencia del rol de CLIENT_MUTE. + Core Portnums Only + Ignora paquetes de puertos no estándar, tales como los TAK, Test de Rango (Rangetest), Contador de paquetes (Pax), etc. Solo retransmite paquetes que vengan de puertos estándar como: Información de Nodo (NodeInfo), Mensajes de texto, Posición, telemetría y Routing. Trate un doble toque en acelerómetros soportados como una pulsación de botón de usuario. - Deshabilita la triple pulsación del botón de usuario para activar o desactivar GPS. - Controla el LED parpadeante del dispositivo. Para la mayoría de los dispositivos esto controlará uno de los hasta 4 LEDs, el cargador y el GPS tienen LEDs no controlables. + Send a position on the primary channel when the user button is triple clicked. + Controla el LED parpadeante del dispositivo. Para la mayoría de los dispositivos esto controlará uno de los hasta 4 LEDs, el cargador y el GPS tienen LEDs no controlables. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Clave Pública + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Intervalo de transmisión + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Posición Fijada + Altitud + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Depuración Nombre del canal Código QR icono de la aplicación @@ -315,7 +377,8 @@ Rango de Valores 0 - 500. Batería baja: %s Notificaciones de batería baja (nodos favoritos) Presión Barométrica - Mesh a través de UDP activado + Habilitado + UDP Broadcast Configuración UDP Última escucha: %2$s
Última posición: %3$s
Batería: %4$s]]> Cambiar mi posición @@ -393,27 +456,27 @@ Rango de Valores 0 - 500. Pin GPIO para monitorizar Tipo de detección para activar Utilizar el modo de entrada PULL_UP - Configuración del dispositivo - Rol - Redefinir PIN_BOTÓN (PIN_BUTTON) - Redefinir PIN_BUZZER + Dispositivo + Device Role + Button GPIO + Buzzer GPIO Modo de retransmisión - Periodo entre transmisiones de la información del nodo (segundos) - Tratar las dobles pulsaciones como una de botón - Desactivar pulsaciones triples - Zona horaria POSIX - Desactivar el latido LED - Configuración de pantalla - Tiempo para apagar la pantalla (segundos) - Formato de las coordenadas GPS - Tiempo para pasar entre pantallas automáticamente (segundos) + Intervalo de transmisión de información del nodo + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Pantalla + Screen on for + Carousel interval La brújula apunta al norte Girar la pantalla 180º Unidades en pantalla - Sobrescribir la auto-detección OLED + OLED type Modo de la pantalla - Rumbo en negrita - Despertar al tocar o moverse + Always point north + Encabezado en negrita + Wake on tap or motion Orientación de la brújula Configuración de las notificaciones externas Notificaciones externas activadas @@ -434,25 +497,27 @@ Rango de Valores 0 - 500. Nag timeout (seconds) Tono de notificación Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Usar ajuste + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Tasa de codificación Frequency offset (MHz) - Region (frequency plan) - Hop limit - - TX power (dBm) - Frequency slot + Región + Number of hops + Transmisión Activa + Potencia de transmisión + Slot de frecuencia Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -469,10 +534,13 @@ Rango de Valores 0 - 500. Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Conexión Red + WiFi Options + Habilitado WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -484,7 +552,7 @@ Rango de Valores 0 - 500. Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Configuración de la posición + Posición Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -502,7 +570,9 @@ Rango de Valores 0 - 500. Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -517,7 +587,9 @@ Rango de Valores 0 - 500. Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Seguridad + Direct Message Key + Admin Keys Clave Pública Clave privada Admin Key @@ -789,4 +861,5 @@ Rango de Valores 0 - 500. Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-et-rEE/strings.xml b/app/src/main/res/values-et-rEE/strings.xml index ca6de077c..1fc64d923 100644 --- a/app/src/main/res/values-et-rEE/strings.xml +++ b/app/src/main/res/values-et-rEE/strings.xml @@ -53,29 +53,91 @@ Tundmatu avalik võti Vigane sessiooni võti Avalik võti autoriseerimata - Rakendusega ühendatud või iseseisev sõnumsideseade. - Seade, mis ei edasta pakette teistelt seadmetelt. - Infrastruktuuri sõlm võrgu leviala laiendamiseks sõnumite edastamise kaudu. Nähtav sõlmede loendis. - Ruuteri ja Kliendi kombinatsioon. Ei ole mõeldud mobiilseadmetele. - Infrastruktuuri sõlm võrgu leviala laiendamiseks, edastades sõnumeid minimaalse üldkuluga. Pole sõlmede loendis nähtav. - Esmajärjekorras edastatakse GPS asukoha pakette. - Esmalt edastatakse telemeetria pakette. - Optimeeritud ATAK süsteemi side jaoks, vähendab rutiinseid saateid. - Seade, mis edastab ülekandeid ainult siis, kui see on vajalik varjamiseks või energia säästmiseks. - Edastab asukohta regulaarselt vaikekanalile sõnumina, et aidata seadme leidmisel. - Võimaldab automaatseid TAK PLI saateid ja vähendab rutiinseid saateid. - Infrastruktuurisõlm, mis saadab pakette ainult ühe korra, ning alles peale kõiki teisi sõlmi, tagades kohalikele klastritele täiendava katvuse. Nähtav sõlmede loendis. - Saada uuesti mis tahes jälgitav sõnum, kui see oli privaatkanali või teisest samade LoRa parameetritega kärgvõrgus. - Sama käitumine nagu KÕIK puhul, aga pakete ei dekodeerita vaid need lihtsalt edastatakse. Saadaval ainult Repiiteri rollis. Teise rolli puhul toob kaasa KÕIK käitumise. - Ignoreerib jälgitavaid sõnumeid välis kärgvõrkudest avatud või dekrüpteerida mittevõimalikke sõnumeid. Saadab sõnumeid ainult kohalikel primaarsetel/sekundaarsetel kanalitel. - Ignoreerib sõnumeid välistest kärgvõrkudest, nt AINULT KOHALIK, saadud sõnumeid, kuid läheb sammu edasi, ignoreerides ka sõnumeid sõlmedelt, mis pole veel tuntud sõlme loendis. - Lubatud ainult rollidele SENSOR, TRACKER ja TAK_TRACKER, see blokeerib kõik kordus edastused, vastupidiselt CLIENT_MUTE rollile. - Ignoreerib pakette mittestandardsetest pordinumbritest, näiteks: TAK, RangeTest, PaxCounter jne. Edastatakse ainult standardsete pordinumbritega pakette: NodeInfo, Tekst, Asukoht, Telemeetia ja Routimine. + Client + Rakendusega ühendatud või iseseisev sõnumsideseade. + Client Mute + Seade, mis ei edasta pakette teistelt seadmetelt. + Router + Infrastruktuuri sõlm võrgu leviala laiendamiseks sõnumite edastamise kaudu. Nähtav sõlmede loendis. + Router Client + Ruuteri ja Kliendi kombinatsioon. Ei ole mõeldud mobiilseadmetele. + Repeater + Infrastruktuuri sõlm võrgu leviala laiendamiseks, edastades sõnumeid minimaalse üldkuluga. Pole sõlmede loendis nähtav. + Tracker + Esmajärjekorras edastatakse GPS asukoha pakette. + Sensor + Esmalt edastatakse telemeetria pakette. + TAK + Optimeeritud ATAK süsteemi side jaoks, vähendab rutiinseid saateid. + Client Hidden + Seade, mis edastab ülekandeid ainult siis, kui see on vajalik varjamiseks või energia säästmiseks. + Lost and Found + Edastab asukohta regulaarselt vaikekanalile sõnumina, et aidata seadme leidmisel. + TAK Tracker + Võimaldab automaatseid TAK PLI saateid ja vähendab rutiinseid saateid. + Router Late + Infrastruktuurisõlm, mis saadab pakette ainult ühe korra, ning alles peale kõiki teisi sõlmi, tagades kohalikele klastritele täiendava katvuse. Nähtav sõlmede loendis. + Kõik + Saada uuesti mis tahes jälgitav sõnum, kui see oli privaatkanali või teisest samade LoRa parameetritega kärgvõrgus. + All Skip Decoding + Sama käitumine nagu KÕIK puhul, aga pakete ei dekodeerita vaid need lihtsalt edastatakse. Saadaval ainult Repiiteri rollis. Teise rolli puhul toob kaasa KÕIK käitumise. + Local Only + Ignoreerib jälgitavaid sõnumeid välis kärgvõrkudest avatud või dekrüpteerida mittevõimalikke sõnumeid. Saadab sõnumeid ainult kohalikel primaarsetel/sekundaarsetel kanalitel. + Known Only + Ignoreerib sõnumeid välistest kärgvõrkudest, nt AINULT KOHALIK, saadud sõnumeid, kuid läheb sammu edasi, ignoreerides ka sõnumeid sõlmedelt, mis pole veel tuntud sõlme loendis. + Puudub + Lubatud ainult rollidele SENSOR, TRACKER ja TAK_TRACKER, see blokeerib kõik kordus edastused, vastupidiselt CLIENT_MUTE rollile. + Core Portnums Only + Ignoreerib pakette mittestandardsetest pordinumbritest, näiteks: TAK, RangeTest, PaxCounter jne. Edastatakse ainult standardsete pordinumbritega pakette: NodeInfo, Tekst, Asukoht, Telemeetia ja Routimine. Topelt puudutust toetatud kiirendusmõõturitel käsitletakse kasutaja nupuvajutusena. - Keelab kolmikvajutuse GPS lubamiseks või keelamiseks. - Juhib seadme vilkuvaid LED. Enamiku seadmete puhul juhib see 1 kuni 4 LED, laadija ja GPS LED ei ole juhitavad. + Send a position on the primary channel when the user button is triple clicked. + Juhib seadme vilkuvaid LED. Enamiku seadmete puhul juhib see ühe kuni 4 LED, laadija ja GPS LED ei ole juhitavad. + Time zone for dates on the device screen and log. Lisaks MQTT-le ja PhoneAPI-le saatmisele peaks meie NeighborInfo edastama ka LoRa kaudu. Ei tööta vaikimisi võtme ja - nimega kanalil. - Avalik võti + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Silumine Kanali nimi QR kood rakenduse ikoon @@ -314,7 +376,8 @@ Madal akupinge: %s Madala akupinge teated (lemmik sõlmed) Baromeetri rõhk - Kärgvõrk UDP kaudu lubatud + Enabled + UDP Broadcast UDP sätted Viimati kuuldud: %2$s
viimane asukoht: %3$s
Akupinge: %4$s]]> Lülita asukoht sisse @@ -392,27 +455,27 @@ GPIO klemmi jälgimine Identifitseerimistüüp Kasuta INPUT_PULLUP režiimi - Seadme sätted - Roll - Seadista uuesti PIN_NUPP - Seadista uuesti PIN_SIGNAAL - Uuesti edastamise režiim - Sõlme Info edastuse sagedus (sekund) - Topelt puudutus nupuvajutusena - Kolmikvajutuse keelamine - POSIX ajatsoon - Keela südamelöögid - Ekraani sätted - Ekraani välja lükkamine (sekund) - GPS koordinaatide formaat - Automaatne ekraani karussell (sekund) + Seade + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Ekraan + Screen on for + Carousel interval Kompassi põhjasuund üleval Keera ekraani Ekraani ühikud - OLED automaat tuvastamise tühistamine + OLED type Ekraani režiim - Pealkiri paksult - Ekraani äratamine puudutamise või liigutamisega + Always point north + Bold Heading + Wake on tap or motion Kompassi suund Välisete teadete sätted Luba Välised teated @@ -433,25 +496,27 @@ Häire ajalõpp (sekundit) Helin Kasuta I2S summerina - LoRa sätted - Kasuta modemi vaikesätteid - Modemi vaikesäte + LoRa + Options + Täpsem + Use Preset + Presets Ribalaius - Levitustegur - Kodeerimiskiirus + Spread Factor + Coding Rate Sagedusnihe (MHz) - Regioon (sagedusplaan) - Hüppe limiit - TX lubatud - TX võimsus (dBm) - Sageduspesa + Regioon + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Töötsükli tühistamine Ignoreeri sissetulevaid - SX126X RX võimendamine - Kasuta kohandatud sagedust (MHz) + RX Boosted Gain + Frequency Override PA ventilaator keelatud Keela MQTT - MQTT kasutuses + Ok to MQTT MQTT sätted MQTT lubatud Aadress @@ -468,10 +533,13 @@ Naabri teave lubatud Uuenduste sagedus (sekundit) Saada LoRa kaudu - Võrgu sätted + Võrk + WiFi Options + Enabled Wifi lubatud SSID PSK + Ethernet Options Ethernet lubatud NTP server rsyslog server @@ -483,7 +551,7 @@ Paxcounter lubatud WiFi RSSI lävi (vaikeväärtus -80) BLE RSSI lävi (vaikeväärtus -80) - Asukoha sätted + Asukoht Asukoha jagamine sagedus (sekund) Nutikas asukoht kasutuses Nutika asukoha minimaalne muutus (meetrites) @@ -501,7 +569,9 @@ Asukoha märgid Toite sätted Luba energiasäästurežiim + Shutdown on power loss Aku viivitus väljalükkamisel (sekund) + ADC multiplier override Asenda ADC kordistaja suhe Sinihamba ootamine (sekund) Super süvaune kestvus (sekund) @@ -516,7 +586,9 @@ Kaug riistvara lubatud Luba määratlemata klemmi juurdepääs Saadaval klemmid - Turva sätted + Turvalisus + Direct Message Key + Admin Keys Avalik võti Salajane võti Administraatori võti @@ -788,4 +860,5 @@ Avaliku interneti ligipääsu sõnumid edastatakse kohalikku kärgvõrgu. Nullhüppe poliitika tõttu ei levi MQTT vaikeserverist tulev liiklus sellest seadmest kaugemale. Ikooni tähendused Põhikanalil asukoha jagamise keelamine lubab perioodilist asukoha edastust esimesel lisakanalil, kui asukoht on lubatud, vastasel juhul on vaja käsitsi asukoha päringut teha. + Device configuration diff --git a/app/src/main/res/values-fi-rFI/strings.xml b/app/src/main/res/values-fi-rFI/strings.xml index 6291b565c..a711c1dcb 100644 --- a/app/src/main/res/values-fi-rFI/strings.xml +++ b/app/src/main/res/values-fi-rFI/strings.xml @@ -53,29 +53,91 @@ Tuntematon julkinen avain Virheellinen istuntoavain Julkinen avain ei ole valtuutettu - Yhdistetty sovellukseen tai itsenäinen viestintälaite. - Laite, joka ei välitä paketteja muilta laitteilta. - Laite, joka laajentaa verkon infrastruktuuria viestejä välittämällä. Näkyy solmulistauksessa. - Yhdistelmä ROUTER sekä CLIENT roolista. Ei mobiililaitteille. - Laite, joka laajentaa verkon kattavuutta välittämällä viestejä verkkoa kuormittamatta. Ei näy solmulistauksessa. - Lähettää GPS-sijaintitiedot ensisijaisesti. - Lähettää telemetriatiedot ensisijaisesti. - Optimoitu ATAK-järjestelmän viestintään, joka vähentää tavanomaisia lähetyksiä. - Laite, joka lähettää vain tarvittaessa tai virransäästotilassa. - Lähettää laitteen sijainnin viestillä oletuskanavalle sen löytämisen helpottamiseksi. - Ottaa käyttöön automaattisen TAK PLI -lähetyksen vähentäen tavanomaisia lähetyksiä. - Muuten samanlainen kuin ROUTER rooli, mutta se uudelleen lähettää paketteja vasta kaikkien muiden tilojen jälkeen, varmistaen paremman peittoalueen muille laitteille. Laite näkyy mesh-verkon solmuluettelossa muille käyttäjille. - Uudelleenlähettää kaikki havaitut viestit, jos ne ovat olleet omalla yksityisellä kanavalla tai toisessa mesh-verkosta, jossa on samat LoRa-parametrit. - Käyttäytyy samalla tavalla kuin ALL, mutta jättää pakettien purkamisen väliin ja lähettää niitä vain uudelleen. Mahdollista käyttää vain Repeater-roolissa. Tämän asettaminen muille rooleille johtaa ALL-käyttäytymiseen. - Ei ota huomioon havaittuja viestejä ulkomaisista verkoista, jotka ovat avoimia tai joita se ei voi purkaa. Lähettää uudelleen viestin vain solmun paikallisilla ensisijaisilla / toissijaisilla kanavilla. - Ei ota huomioon havaittuja viestejä ulkomaisista verkoista kuten LOCAL ONLY, mutta menee askeleen pidemmälle myös jättämällä huomiotta viestit solmuista, joita ei ole jo solmun tuntemassa listassa. - Sallittu vain SENSOR-, TRACKER- ja TAK_TRACKER -rooleille. Tämä estää kaikki uudelleenlähetykset, toisin kuin CLIENT_MUTE -roolissa. - Ei ota huomioon paketteja, jotka tulevat ei-standardeista porttinumeroista, kuten: TAK, RangeTest, PaxCounter jne. Lähettää uudelleen vain paketteja, jotka käyttävät standardeja porttinumeroita: NodeInfo, Text, Position, Telemetry ja Routing. + Client + Yhdistetty sovellukseen tai itsenäinen viestintälaite. + Client Mute + Laite, joka ei välitä paketteja muilta laitteilta. + Router + Laite, joka laajentaa verkon infrastruktuuria viestejä välittämällä. Näkyy laitelistauksessa. + Router Client + Yhdistelmä ROUTER sekä CLIENT roolista. Ei mobiililaitteille. + Repeater + Laite, joka laajentaa verkon kattavuutta välittämällä viestejä verkkoa kuormittamatta. Ei näy laitelistauksessa. + Tracker + Lähettää GPS-sijaintitiedot ensisijaisesti. + Sensor + Lähettää telemetriatiedot ensisijaisesti. + TAK + Optimoitu ATAK-järjestelmän viestintään, joka vähentää tavanomaisia lähetyksiä. + Client Hidden + Laite, joka lähettää vain tarvittaessa tai virransäästotilassa. + Lost and Found + Lähettää laitteen sijainnin viestillä oletuskanavalle sen löytämisen helpottamiseksi. + TAK Tracker + Ottaa käyttöön automaattisen TAK PLI -lähetyksen vähentäen tavanomaisia lähetyksiä. + Router Late + Muuten samanlainen kuin ROUTER rooli, mutta se uudelleen lähettää paketteja vasta kaikkien muiden tilojen jälkeen, varmistaen paremman peittoalueen muille laitteille. Laite näkyy mesh-verkon laiteluettelossa muille käyttäjille. + Kaikki + Uudelleenlähettää kaikki havaitut viestit, jos ne ovat olleet omalla yksityisellä kanavalla tai toisessa mesh-verkosta, jossa on samat LoRa-parametrit. + Ohita kaikki dekoodaukset + Käyttäytyy samalla tavalla kuin ALL, mutta jättää pakettien purkamisen väliin ja lähettää niitä vain uudelleen. Mahdollista käyttää vain Repeater-roolissa. Tämän asettaminen muille rooleille johtaa ALL-käyttäytymiseen. + Vain paikallinen + Ei ota huomioon havaittuja viestejä ulkomaisista verkoista, jotka ovat avoimia tai joita se ei voi purkaa. Lähettää uudelleen viestin vain laitteen paikallisilla ensisijaisilla / toissijaisilla kanavilla. + Vain tunnetut + Ei ota huomioon havaittuja viestejä ulkomaisista verkoista kuten LOCAL ONLY, mutta menee askeleen pidemmälle myös jättämällä huomiotta viestit laitteista, joita ei ole jo laitteen tuntemassa listassa. + ei mitään + Sallittu vain SENSOR-, TRACKER- ja TAK_TRACKER -rooleille. Tämä estää kaikki uudelleenlähetykset, toisin kuin CLIENT_MUTE -roolissa. + Ainoastaan ytimen porttinumerot + Ei ota huomioon paketteja, jotka tulevat ei-standardeista porttinumeroista, kuten: TAK, RangeTest, PaxCounter jne. Lähettää uudelleen vain paketteja, jotka käyttävät standardeja porttinumeroita: NodeInfo, Text, Position, Telemetry ja Routing. Käsittele tuetun kiihtyvyysanturin kaksoisnapautusta käyttäjäpainikkeella. - Poista käytöstä kolmoisnapautuksen GPS:n käyttöönoton painike. - Hallitsee laitteen vilkkuvaa LED-valoa. Useimmissa laitteissa tällä voidaan ohjata yhtä neljästä LED-valosta, mutta latauksen tai GPS:n valoja ei voi hallita. + Lähetä sijainti ensisijaisella kanavalla, kun käyttäjäpainiketta painetaan kolme kertaa. + Hallitsee laitteen vilkkuvaa LED-valoa. Useimmissa laitteissa tällä voidaan ohjata yhtä neljästä LED-valosta, mutta latauksen tai GPS:n valoja ei voi hallita. + Aikavyöhyke laitteen näytöllä ja lokissa käytettäville päivämäärille. Lähetetäänkö naapuritiedot LoRa:n kautta sen lisäksi, että ne lähetetään MQTT-protokollalla ja PhoneAPI sovellusrajapinnassa? Tämä ei ole tuettu kanavalla, joka käyttää oletussalausavainta ja nimeä. - Julkinen avain + Kuinka kauan näyttö pysyy päällä sen jälkeen, kun käyttäjäpainiketta on painettu tai viestejä on vastaanotettu. + Vaihtaa automaattisesti seuraavalle näytön sivulle kuin karuselli, määritetyn aikavälin perusteella. + Näytön ympyrän ulkopuolella oleva kompassisuunta osoittaa aina pohjoiseen. + Käännä näyttö pystysuunnassa. + Laitteen näytöllä näytettävät yksiköt. + Ohita OLED-näytön automaattinen tunnistus. + Ohita oletusnäytön asettelu. + Tee näytön otsikkotekstistä lihavoitu. + Edellyttää, että laitteessasi on kiihtyvyysanturi. + Alue, jossa aiot käyttää radiolaitteitasi. + Saatavilla olevat modeemiesiasetukset, oletus on Long Fast. + Asettaa maksimihyppyjen määrän, oletus on 3. Hyppyjen määrän lisääminen kasvattaa myös ruuhkaa, joten sitä tulisi käyttää varoen. 0 hypyn lähettämät viestit eivät saa kuittauksia (ACK). + Laitteesi käyttötaajuus lasketaan alueen, modeemin esiasetuksen ja tämän kentän perusteella. Kun arvo on 0, aikaväli lasketaan automaattisesti ensisijaisen kanavan nimen perusteella. + WiFi:n käyttöön ottaminen poistaa Bluetooth-yhteyden sovellukseen. + Ethernetin ottaminen käyttöön poistaa Bluetooth-yhteyden sovellukseen. TCP-laiteyhteydet eivät ole käytettävissä Applen laitteilla. + Ota käyttöön pakettien lähettäminen UDP:n kautta paikallisverkossa. + Suurin aikaväli, jonka aikana laite ei lähetä sijaintia. + Nopein mahdollinen sijaintipäivitysten lähetysväli, kun minimietäisyys on täyttynyt. + Vähimmäisetäisyys metreinä, jonka muutos otetaan huomioon älykkäässä sijainnin lähetyksessä. + Kuinka usein GPS-sijaintia tulisi yrittää ottaa. + Valinnaiset kentät, jotka sisällytetään sijaintiviesteihin. Mitä enemmän kenttiä sisällytetään, sitä suurempi viesti on, mikä pidentää lähetysaikaa ja lisää pakettihäviön riskiä. + Asetus laittaa kaiken mahdollisen lepotilaan. Seuranta- ja anturiroolissa tämä sisältää myös LoRa-radion. Älä käytä tätä asetusta, jos haluat käyttää laitetta puhelinsovellusten kanssa tai laitetta ilman käyttäjäpainiketta. + Luodaan julkisesta avaimestasi ja lähetetään muille verkon solmuille, jotta ne voivat laskea jaetun salaisen avaimen. + Käytetään jaetun avaimen luomiseen etälaitteen kanssa. + Julkinen avain, jolla on oikeus lähettää hallintaviestejä tälle laitteelle. + Laite on verkon ylläpitäjän hallinnoima, eikä käyttäjä pääse muokkaamaan laitteen asetuksia. + Sarjaporttikonsoli käyttöön Stream API:n kautta. + Tulosta reaaliaikainen virheenkorjausloki sarjaportin kautta, ja tarkastele sekä vie Bluetoothin kautta laitteesta poistettuja sijaintitietoja sisältäviä lokitiedostoja. + + Sijainti Paketti + Lähetyksen aikaväli + Älykäs sijainti + Vähimmäisaikaväli + Pienin etäisyys + Laitteen GPS + Kiinteä sijainti + Korkeus + Päivitysväli + Laitteen GPS:n lisäasetukset + GPS vastaanoton GPIO-pinni + GPS lähetyksen GPIO-pinni + GPS EN GPIO-pinni + GPIO + Vianetsintä Kanavan nimi QR-koodi Sovelluskuvake @@ -314,7 +376,8 @@ Akku vähissä: %s Akun vähäisen varauksen ilmoitukset (suosikkilaitteet) Barometrinen paine - Mesh-verkko UDP:n kautta käytössä + Käytössä + UDP-lähetys UDP asetukset Viimeksi kuultu: %2$s
Viimeisin sijainti: %3$s
Akku: %4$s]]> Kytke sijainti päälle @@ -392,27 +455,27 @@ GPIO-pinni valvontaa varten Tunnistuksen tyyppi Käytä INPUT_PULLUP tilaa - Laitteen asetukset - Rooli - Uudelleenmääritä PIN_BUTTON - Uudelleenmääritä PIN_BUZZER + Laite + Laitteen rooli + Painikkeen GPIO-pinni + Summerin GPIO-pinni Uudelleenlähetyksen tila - Laitetiedon lähetyksen väli (sekuntia) - Kaksoisnapautus napin painalluksena - Poista kolmoisklikkaus käytöstä - POSIX-aikavyöhyke - Poista valvontasignaalin LED käytöstä - Näytön asetukset - Näyttö pois päältä (sekuntia) - GPS-koordinaattien formaatti - Automaattinen näytön karuselli (sekuntia) + Laitteen tietojen lähetyksen aikaväli + Kaksoisnapautus painikkeena + Kolmoisklikkaus Ad Hoc -pingille + Aikavyöhyke + Ledin valvontasignaali + Näyttö + Näytön päälläoloaika + Karusellin aikaväli Kompassin pohjoinen ylhäällä Käännä näyttö Näyttöyksiköt - Ohita OLED-näytön automaattinen tunnistus + OLED-tyyppi Näyttötila - Lihavoitu otsikko - Herätä näyttö kosketuksella tai liikkeellä + Osoita aina pohjoiseen + Lihavoitu otsikko + Herätä napautuksesta tai liikkeestä Kompassin suuntaus Ulkoisten ilmoituksien asetukset Ulkoiset ilmoitukset käytössä @@ -433,22 +496,24 @@ Hälytysaikakatkaisu (sekuntia) Soittoääni Käytä I2S protokollaa äänimerkille - LoRa:n asetukset - Käytä modeemin esiasetusta - Modeemin esiasetus + LoRa + Valinnat + Lisäasetukset + Käytä esiasetusta + Esiasetukset Kaistanlevyes - Signaalin levennyskerroin + Levennyskerroin (Spread Factor) Koodausnopeus Taajuuspoikkeama (MHz) - Alue (taajuussuunnitelma) - Hyppyraja - TX käytössä - TX-lähetysteho (dBm) + Alue + Hyppyjen määrä + Lähetys käytössä + Lähetysteho Taajuuspaikka Ohita käyttöaste (Duty Cycle) Ohita saapuvat - SX126X RX tehostettu vahvistus - Käytä mukautettua taajuutta (MHz) + RX tehostettu vahvistus + Taajuuden ohitus PA tuuletin pois käytöstä Ohita MQTT MQTT päällä @@ -468,10 +533,13 @@ Naapuritiedot käytössä Päivityksen aikaväli (sekuntia) Lähetä LoRa:n kautta - Verkon asetukset + Verkko + WiFi:n asetukset + Käytössä WiFi käytössä SSID PSK + Verkon asetukset Ethernet käytössä NTP palvelin rsyslog-palvelin @@ -483,7 +551,7 @@ PAX-laskuri käytössä WiFi-signaalin RSSI-kynnysarvo (oletus -80) BLE-signaalin RSSI-kynnysarvo (oletus -80) - Sijainnin asetukset + Sijainti Sijainnin lähetyksen väli (sekuntia) Älykäs sijainti käytössä Älykkään sijainnin etäisyys (metriä) @@ -501,7 +569,9 @@ Sijaintimerkinnät Virran asetukset Ota virransäästötila käyttöön + Sammuta virran katketessa Akun viivästetty sammutus (sekuntia) + ADC-kertoimen ohitus Korvaava AD-muuntimen kerroin Bluetoothin odotusaika (sekuntia) Syväunivaiheen kesto (sekuntia) @@ -516,7 +586,9 @@ Etälaitteen ohjaus käytössä Salli määrittämättömän pinnin käyttö Käytettävissä olevat pinnit - Turvallisuusasetukset + Turvallisuus + Suoran viestin avain + Ylläpitäjän avaimet Julkinen avain Yksityinen avain Ylläpitäjän avain @@ -788,4 +860,5 @@ Julkisesta internet-yhdyskäytävästä tulevat viestit välitetään paikalliseen mesh-verkkoon. Nollahyppysääntöjen vuoksi oletuksena MQTT-palvelimelta tuleva liikenne ei etene tätä laitetta pidemmälle. Kuvakkeiden merkitykset Sijainnin poistaminen käytöstä ensisijaisella kanavalla mahdollistaa sijainnin jaksottaisen lähetyksen ensimmäisellä toissijaisella kanavalla, jossa sijainti on käytössä. Muussa tapauksessa vaaditaan manuaalinen sijaintipyyntö. + Laitteen asetukset diff --git a/app/src/main/res/values-fr-rFR/strings.xml b/app/src/main/res/values-fr-rFR/strings.xml index 45d0e51c5..b055c137b 100644 --- a/app/src/main/res/values-fr-rFR/strings.xml +++ b/app/src/main/res/values-fr-rFR/strings.xml @@ -53,29 +53,91 @@ Clé publique inconnue Mauvaise clé de session Clé publique non autorisée - Dispositif de messagerie autonome ou connecté à l\'application. - Le périphérique ne peut pas retransmettre les paquets des autres périphériques. - Nœud d\'infrastructure pour étendre la couverture réseau en relayant les messages. Visible dans la liste des nœuds. - Combinaison à la fois du ROUTER et du CLIENT. Pas pour les appareils mobiles. - Nœud d\'infrastructure pour étendre la couverture réseau en relayant les messages avec une surcharge minimale. Non visible dans la liste des nœuds. - Diffuse les paquets de position GPS en priorité. - Diffuse les paquets de télémétrie en priorité. - Optimisé pour la communication du système ATAK, réduit les diffusions de routine. - Appareil qui ne diffuse que si nécessaire pour économiser en énergie ou en furtivité. - Diffuse la localisation comme message vers le canal par défaut régulièrement afin d\'aider à la récupération de l\'appareil. - Active les diffusions automatiques de TAK PLI et réduit les diffusions de routine. - Nœud d\'infrastructure qui retransmet toujours les paquets une fois mais seulement après tous les autres modes, assurant une couverture supplémentaire pour les clusters locaux. Visible dans la liste des nœuds. - Rediffuse tout message observé, si il était sur notre canal privé ou depuis un autre maillage avec les mêmes paramètres lora. - Identique au comportement de TOUS mais ignore le décodage des paquets et les rediffuse simplement. Uniquement disponible pour le rôle Répéteur. Définir cela sur tout autre rôle entraînera le comportement de TOUS. - Ignoré mesaj obsève soti nan meshes etranje ki louvri oswa sa yo li pa ka dekripte. Sèlman rebroadcast mesaj sou kanal prensipal / segondè lokal nœud. - Ignoré mesaj obsève soti nan meshes etranje tankou \"LOCAL ONLY\", men ale yon etap pi lwen pa tou ignorer mesaj ki soti nan nœud ki poko nan lis konnen nœud la. - Seulement autorisé pour les rôles SENSOR, TRACKER et TAK_TRACKER, cela empêchera toutes les rediffusions, contrairement au rôle CLIENT_MUTE. - Ignoré pakè soti nan portnum ki pa estanda tankou: TAK, RangeTest, PaxCounter, elatriye. Sèlman rebroadcast pakè ak portnum estanda: NodeInfo, Tèks, Pozisyon, Telemetri, ak Routing. + Client + Dispositif de messagerie autonome ou connecté à l\'application. + Client Mute + Appareil ne transmettant pas les paquets provenant d\'autres appareils. + Router + Nœud d\'infrastructure pour étendre la couverture réseau en relayant les messages. Visible dans la liste des nœuds. + Router Client + Combinaison à la fois du ROUTER et du CLIENT. Pas pour les appareils mobiles. + Repeater + Nœud d\'infrastructure pour étendre la couverture réseau en relayant les messages avec une surcharge minimale. Non visible dans la liste des nœuds. + Tracker + Transmet les paquets de positions GPS en priorité. + Sensor + Transmet les paquets de télémétrie en priorité. + TAK + Optimisé pour le système de communication ATAK, diminue les émissions de routine. + Client Hidden + Appareil ne diffusant que si nécessaire pour la discrétion et l\'économie d\'énergie. + Lost and Found + Transmet régulièrement la position par message dans le canal par défaut pour vous aider à retrouver l\'appareil. + TAK Tracker + Active les diffusions automatiques de TAK PLI et réduit les diffusions de routine. + Router Late + Nœud d\'infrastructure qui retransmet toujours les paquets une fois mais seulement après tous les autres modes, assurant une couverture supplémentaire pour les clusters locaux. Visible dans la liste des nœuds. + All + Rediffuser tout message observé, s\'il était sur notre canal privé ou à partir d\'un autre maillage avec les mêmes paramètres Lora. + All Skip Decoding + Identique au comportement de TOUS mais ignore le décodage des paquets et les rediffuse simplement. Uniquement disponible pour le rôle Répéteur. Définir cela sur tout autre rôle entraînera le comportement de TOUS. + Local Only + Ignoré mesaj obsève soti nan meshes etranje ki louvri oswa sa yo li pa ka dekripte. Sèlman rebroadcast mesaj sou kanal prensipal / segondè lokal nœud. + Known Only + Ignore les messages observés depuis des mailles distantes comme LOCAL SEULEMENT, mais va plus loin en ignorant également les messages des nœuds qui ne sont pas déjà dans la liste connue du nœud. + Aucun + Seulement autorisé pour les rôles SENSOR, TRACKER et TAK_TRACKER, cela empêchera toutes les rediffusions, contrairement au rôle CLIENT_MUTE. + Core Portnums Only + Ignoré pakè soti nan portnum ki pa estanda tankou: TAK, RangeTest, PaxCounter, elatriye. Sèlman rebroadcast pakè ak portnum estanda: NodeInfo, Tèks, Pozisyon, Telemetri, ak Routing. Traiter un double appui sur les accéléromètres compatibles comme une pression de bouton utilisateur. - Désactive le triple appui du bouton utilisateur pour activer ou désactiver le GPS. - Contrôle la LED clignotante sur l\'appareil. Pour la plupart des appareils cela contrôlera une des 4 LED, celles du chargeur et du GPS ne sont pas contrôlables. + Send a position on the primary channel when the user button is triple clicked. + Contrôle la LED clignotante sur l\'appareil. Pour la plupart des appareils cela contrôlera une des 4 LED, celles du chargeur et du GPS ne sont pas contrôlables. + Time zone for dates on the device screen and log. Que ce soit en plus de l\'envoyer à MQTT et à PhoneAPI, notre NeighborInfo devrait être transmis par LoRa. Non disponible sur un canal avec la clé et le nom par défaut. - Clé publique + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Intervalle de diffusion + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Position fixe + Altitude + Intervalle de mise à jour + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Nom du canal Code QR icône de l\'application @@ -314,7 +376,8 @@ Batterie faible Notifications de batterie faible (nœuds favoris) Pression Barométrique - Maillage via UDP activer + Activé + UDP Broadcast Configuration UDP Dernière écoute : %2$s
Dernière position : %3$s
Batterie : %4$s]]> Basculer ma position @@ -392,27 +455,27 @@ Broche GPIO a surveiller Type du déclencheur de détection Utiliser le mode INPUT_PULLUP - Configuration de l\'appareil - Rôle - Redéfinir le PIN_BUTTON - Redéfinir le PIN_BUZZER - Mode de retransmission - Intervalle de diffusion de NodeInfo (secondes) - Appuyer deux fois sur le bouton - Désactiver le triple-clic - Zone horaire POSIX - Désactiver la LED de pulsation - Configuration de l\'affichage - Délai de mise en veille de l\'écran (secondes) - Format des coordonnées GPS - Carrousel automatique des écrans (secondes) + Appareil + Device Role + Button GPIO + Buzzer GPIO + Mode de réémission + Intervalle de diffusion des infos nœud + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Écran + Screen on for + Carousel interval Nord de la boussole vers le haut Inverser l\'écran Unités d\'affichage - Remplacer OLED auto-détection + OLED type Mode d\'affichage - Titre en gras - Réveiller l\'écran lors d\'un appui ou d\'un déplacement + Always point north + Titre en gras + Wake on tap or motion Orientation de la boussole Configuration de notification externe Notifications externes activées @@ -433,25 +496,27 @@ Délai d\'attente du nag Sonnerie Utiliser l\'I2S comme buzzer - Configuration LoRa - Utiliser le pré-réglage du modem - Préréglage du modem + LoRa + Options + Avancé + Utiliser un préréglage + Presets Bande Passante - Facteur de propagation + Spread Factor Taux de codage Décalage de fréquence (MHz) - Région (plan de fréquence) - Limite de saut - TX activé - Puissance TX (dBM) - Emplacement de fréquence + Région + Nombre de sauts + Transmission activée + Puissance d\'émission + Slot de fréquence Ne pas prendre en compte la limite d\'utilisation Ignorer les entrées - Gain de SX126X RX augmenté - Remplacer la fréquence (MHz) + RX Boosted Gain + Frequency Override Ventilateur PA désactivé Ignorer MQTT - OK vers MQTT + Ok to MQTT Configuration MQTT MQTT activé Adresse @@ -468,10 +533,13 @@ Infos de voisinage activées Intervalle de mise à jour (secondes) Transmettre par LoRa - Configuration du réseau + Réseau + WiFi Options + Activé WiFi activé SSID PSK + Ethernet Options Ethernet activé Serveur NTP Serveur Rsyslog @@ -483,7 +551,7 @@ Paxcounter activé Seuil RSSI WiFi (par défaut -80) Seuil BLE RSSI (par défaut -80) - Configuration de la position + Position Intervalle de diffusion de la position (secondes) Position intelligente activée Distance minimale de diffusion intelligente (mètres) @@ -501,7 +569,9 @@ Informations relatives à la position Configuration de l\'alimentation Activer le mode économie d\'énergie + Shutdown on power loss Délai d’extinction sur batterie (secondes) + ADC multiplier override Facteur de remplacement du multiplicateur ADC Temps d\'attente pour le Bluetooth Durée de sommeil en profondeur (secondes) @@ -516,7 +586,9 @@ Matériel distant activé Autoriser l\'accès non défini aux broches Broches disponibles - Configuration de sécurité + Sécurité + Direct Message Key + Admin Keys Clé publique Clé privée Clé Admin @@ -785,4 +857,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-ga-rIE/strings.xml b/app/src/main/res/values-ga-rIE/strings.xml index 42d74ff14..602a40727 100644 --- a/app/src/main/res/values-ga-rIE/strings.xml +++ b/app/src/main/res/values-ga-rIE/strings.xml @@ -53,29 +53,91 @@ Pre-set den x-teirí code Earráid i eochair sesún an riarthóra Eochair phoiblí riarthóra neamhúdaraithe - Feiste nascaithe nó feiste teachtaireachtaí standálaí. - Feiste nach dtarchuir pacáistí ó ghléasanna eile. - Ceannaire infreastruchtúrtha chun clúdach líonra a leathnú trí theachtaireachtaí a athsheoladh. Infheicthe i liosta na nóid. - Comhcheangail de dhá ról ROUTER agus CLIENT. Ní do ghléasanna soghluaiste. - Ceannaire infreastruchtúrtha chun clúdach líonra a leathnú trí theachtaireachtaí a athsheoladh le níos lú romha. - Bíonn sé ag seoladh pacáistí suíomh GPS mar thosaíocht. - Bíonn sé ag seoladh pacáistí teiliméadair mar thosaíocht. - Optamaithe le haghaidh cumarsáide ATAK, laghdaíonn sé cainéil seirbhíse beacht. - Feiste a seolann ach nuair is gá, chun éalú nó do chumas cothromóige. - Pacáiste leis an suíomh agus é seolta chuig an cainéal réamhshocraithe gach lá. - Ceadaíonn fadhb beathú do bhoganna PLI i sórtú PLI i feidhm reatha. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Athsheoladh aon teachtaireacht i ndáiríre má bhí sí oiriúnach le do cheist go léannais foghlamhrúcháin. - Ceim misniúla thosaí go lucht shnaithte! - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Cuireann sé bac ar theachtaireachtaí a fhaightear ó mhóilíní seachtracha cosúil le LOCAL ONLY, ach téann sé céim níos faide trí theachtaireachtaí ó nóid nach bhfuil sa liosta aitheanta ag an nóid a chosc freisin. - Ceadaítear é seo ach amháin do na róil SENSOR, TRACKER agus TAK_TRACKER, agus cuirfidh sé bac ar gach athdháileadh, cosúil leis an róil CLIENT_MUTE. - Cuireann sé bac ar phacáistí ó phortníomhaíochtaí neamhchaighdeánacha mar: TAK, RangeTest, PaxCounter, srl. Ní athdháileann ach pacáistí le portníomhaíochtaí caighdeánacha: NodeInfo, Text, Position, Telemetry, agus Routing. + Client + Feiste nascaithe nó feiste teachtaireachtaí standálaí. + Client Mute + Feiste nach dtarchuir pacáistí ó ghléasanna eile. + Router + Ceannaire infreastruchtúrtha chun clúdach líonra a leathnú trí theachtaireachtaí a athsheoladh. Infheicthe i liosta na nóid. + Router Client + Comhcheangail de dhá ról ROUTER agus CLIENT. Ní do ghléasanna soghluaiste. + Repeater + Ceannaire infreastruchtúrtha chun clúdach líonra a leathnú trí theachtaireachtaí a athsheoladh le níos lú romha. + Tracker + Bíonn sé ag seoladh pacáistí suíomh GPS mar thosaíocht. + Sensor + Bíonn sé ag seoladh pacáistí teiliméadair mar thosaíocht. + TAK + Optamaithe le haghaidh cumarsáide ATAK, laghdaíonn sé cainéil seirbhíse beacht. + Client Hidden + Feiste a seolann ach nuair is gá, chun éalú nó do chumas cothromóige. + Lost and Found + Pacáiste leis an suíomh agus é seolta chuig an cainéal réamhshocraithe gach lá. + TAK Tracker + Ceadaíonn fadhb beathú do bhoganna PLI i sórtú PLI i feidhm reatha. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Athsheoladh aon teachtaireacht i ndáiríre má bhí sí oiriúnach le do cheist go léannais foghlamhrúcháin. + All Skip Decoding + Ceim misniúla thosaí go lucht shnaithte! + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Cuireann sé bac ar theachtaireachtaí a fhaightear ó mhóilíní seachtracha cosúil le LOCAL ONLY, ach téann sé céim níos faide trí theachtaireachtaí ó nóid nach bhfuil sa liosta aitheanta ag an nóid a chosc freisin. + Ní dhéanfaidh sé + Ceadaítear é seo ach amháin do na róil SENSOR, TRACKER agus TAK_TRACKER, agus cuirfidh sé bac ar gach athdháileadh, cosúil leis an róil CLIENT_MUTE. + Core Portnums Only + Cuireann sé bac ar phacáistí ó phortníomhaíochtaí neamhchaighdeánacha mar: TAK, RangeTest, PaxCounter, srl. Ní athdháileann ach pacáistí le portníomhaíochtaí caighdeánacha: NodeInfo, Text, Position, Telemetry, agus Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Ainm Cainéal Cód QR deilbhín feidhmchláir @@ -320,7 +382,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -398,27 +461,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -439,25 +502,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Réigiún + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -474,10 +539,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -489,7 +557,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -507,7 +575,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -522,7 +592,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Public Key Private Key Admin Key @@ -794,4 +866,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-gl-rES/strings.xml b/app/src/main/res/values-gl-rES/strings.xml index 21b46be48..df7fed134 100644 --- a/app/src/main/res/values-gl-rES/strings.xml +++ b/app/src/main/res/values-gl-rES/strings.xml @@ -53,29 +53,91 @@ Unknown Public Key Bad session key Public Key unauthorized - Aplicación conectada ou dispositivo de mensaxería autónomo. - Device that does not forward packets from other devices. - Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. - Combination of both ROUTER and CLIENT. Not for mobile devices. - Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. - Broadcasts GPS position packets as priority. - Broadcasts telemetry packets as priority. - Optimized for ATAK system communication, reduces routine broadcasts. - Device that only broadcasts as needed for stealth or power savings. - Broadcasts location as message to default channel regularly for to assist with device recovery. - Enables automatic TAK PLI broadcasts and reduces routine broadcasts. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. - Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. - Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + Aplicación conectada ou dispositivo de mensaxería autónomo. + Client Mute + Device that does not forward packets from other devices. + Router + Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. + Router Client + Combination of both ROUTER and CLIENT. Not for mobile devices. + Repeater + Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. + Tracker + Broadcasts GPS position packets as priority. + Sensor + Broadcasts telemetry packets as priority. + TAK + Optimized for ATAK system communication, reduces routine broadcasts. + Client Hidden + Device that only broadcasts as needed for stealth or power savings. + Lost and Found + Broadcasts location as message to default channel regularly for to assist with device recovery. + TAK Tracker + Enables automatic TAK PLI broadcasts and reduces routine broadcasts. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. + All Skip Decoding + Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. + None + Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. + Core Portnums Only + Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Nome de canle Código QR icona da aplicación @@ -314,7 +376,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -392,27 +455,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -433,25 +496,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Rexión + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -468,10 +533,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -483,7 +551,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -501,7 +569,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -516,7 +586,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Public Key Private Key Admin Key @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-hr-rHR/strings.xml b/app/src/main/res/values-hr-rHR/strings.xml index ad4019f86..5a46729f5 100644 --- a/app/src/main/res/values-hr-rHR/strings.xml +++ b/app/src/main/res/values-hr-rHR/strings.xml @@ -53,29 +53,91 @@ Unknown Public Key Bad session key Public Key unauthorized - App connected or standalone messaging device. - Device that does not forward packets from other devices. - Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. - Combination of both ROUTER and CLIENT. Not for mobile devices. - Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. - Broadcasts GPS position packets as priority. - Broadcasts telemetry packets as priority. - Optimized for ATAK system communication, reduces routine broadcasts. - Device that only broadcasts as needed for stealth or power savings. - Broadcasts location as message to default channel regularly for to assist with device recovery. - Enables automatic TAK PLI broadcasts and reduces routine broadcasts. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. - Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. - Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + App connected or standalone messaging device. + Client Mute + Device that does not forward packets from other devices. + Router + Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. + Router Client + Combination of both ROUTER and CLIENT. Not for mobile devices. + Repeater + Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. + Tracker + Broadcasts GPS position packets as priority. + Sensor + Broadcasts telemetry packets as priority. + TAK + Optimized for ATAK system communication, reduces routine broadcasts. + Client Hidden + Device that only broadcasts as needed for stealth or power savings. + Lost and Found + Broadcasts location as message to default channel regularly for to assist with device recovery. + TAK Tracker + Enables automatic TAK PLI broadcasts and reduces routine broadcasts. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. + All Skip Decoding + Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. + None + Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. + Core Portnums Only + Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Naziv kanala QR kod ikona aplikacije @@ -316,7 +378,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -394,27 +457,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -435,25 +498,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Regija + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -470,10 +535,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -485,7 +553,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -503,7 +571,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -518,7 +588,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Public Key Private Key Admin Key @@ -790,4 +862,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-ht-rHT/strings.xml b/app/src/main/res/values-ht-rHT/strings.xml index b8b3d1a6d..b797f7f3e 100644 --- a/app/src/main/res/values-ht-rHT/strings.xml +++ b/app/src/main/res/values-ht-rHT/strings.xml @@ -53,29 +53,91 @@ Kle piblik enkoni Kle sesyon move Kle piblik pa otorize - Aplikasyon konekte oswa aparèy mesaj endepandan. - Aparèy ki pa voye pake soti nan lòt aparèy. - Nœud enfrastrikti pou elaji kouvèti rezo pa relaye mesaj. Vizyèl nan lis nœud. - Kombinasyon de toude ROUTER ak CLIENT. Pa pou aparèy mobil. - Nœud enfrastrikti pou elaji kouvèti rezo pa relaye mesaj avèk ti overhead. Pa vizib nan lis nœud. - Voye pakè pozisyon GPS kòm priyorite. - Voye pakè telemetri kòm priyorite. - Optimizé pou kominikasyon sistèm ATAK, redwi emisyon regilye. - Aparèy ki sèlman voye kòm sa nesesè pou kachèt oswa ekonomi pouvwa. - Voye pozisyon kòm mesaj nan kanal default regilyèman pou ede ak rekiperasyon aparèy. - Pèmèt emisyon TAK PLI otomatik epi redwi emisyon regilye. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Rebroadcast nenpòt mesaj obsève, si li te sou kanal prive nou oswa soti nan yon lòt mesh ak menm paramèt lora. - Menm jan ak konpòtman kòm \"ALL\" men sote dekodaj pakè yo epi senpleman rebroadcast yo. Disponib sèlman nan wòl Repeater. Mete sa sou nenpòt lòt wòl ap bay konpòtman \"ALL\". - Ignoré mesaj obsève soti nan meshes etranje ki louvri oswa sa yo li pa ka dekripte. Sèlman rebroadcast mesaj sou kanal prensipal / segondè lokal nœud. - Ignoré mesaj obsève soti nan meshes etranje tankou \"LOCAL ONLY\", men ale yon etap pi lwen pa tou ignorer mesaj ki soti nan nœud ki poko nan lis konnen nœud la. - Sèlman pèmèt pou wòl SENSOR, TRACKER ak TAK_TRACKER, sa a ap entèdi tout rebroadcasts, pa diferan de wòl CLIENT_MUTE. - Ignoré pakè soti nan portnum ki pa estanda tankou: TAK, RangeTest, PaxCounter, elatriye. Sèlman rebroadcast pakè ak portnum estanda: NodeInfo, Tèks, Pozisyon, Telemetri, ak Routing. + Client + Aplikasyon konekte oswa aparèy mesaj endepandan. + Client Mute + Aparèy ki pa voye pake soti nan lòt aparèy. + Router + Nœud enfrastrikti pou elaji kouvèti rezo pa relaye mesaj. Vizyèl nan lis nœud. + Router Client + Kombinasyon de toude ROUTER ak CLIENT. Pa pou aparèy mobil. + Repeater + Nœud enfrastrikti pou elaji kouvèti rezo pa relaye mesaj avèk ti overhead. Pa vizib nan lis nœud. + Tracker + Voye pakè pozisyon GPS kòm priyorite. + Sensor + Voye pakè telemetri kòm priyorite. + TAK + Optimizé pou kominikasyon sistèm ATAK, redwi emisyon regilye. + Client Hidden + Aparèy ki sèlman voye kòm sa nesesè pou kachèt oswa ekonomi pouvwa. + Lost and Found + Voye pozisyon kòm mesaj nan kanal default regilyèman pou ede ak rekiperasyon aparèy. + TAK Tracker + Pèmèt emisyon TAK PLI otomatik epi redwi emisyon regilye. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Rebroadcast nenpòt mesaj obsève, si li te sou kanal prive nou oswa soti nan yon lòt mesh ak menm paramèt lora. + All Skip Decoding + Menm jan ak konpòtman kòm \"ALL\" men sote dekodaj pakè yo epi senpleman rebroadcast yo. Disponib sèlman nan wòl Repeater. Mete sa sou nenpòt lòt wòl ap bay konpòtman \"ALL\". + Local Only + Ignoré mesaj obsève soti nan meshes etranje ki louvri oswa sa yo li pa ka dekripte. Sèlman rebroadcast mesaj sou kanal prensipal / segondè lokal nœud. + Known Only + Ignoré mesaj obsève soti nan meshes etranje tankou \"LOCAL ONLY\", men ale yon etap pi lwen pa tou ignorer mesaj ki soti nan nœud ki poko nan lis konnen nœud la. + Pa gen + Sèlman pèmèt pou wòl SENSOR, TRACKER ak TAK_TRACKER, sa a ap entèdi tout rebroadcasts, pa diferan de wòl CLIENT_MUTE. + Core Portnums Only + Ignoré pakè soti nan portnum ki pa estanda tankou: TAK, RangeTest, PaxCounter, elatriye. Sèlman rebroadcast pakè ak portnum estanda: NodeInfo, Tèks, Pozisyon, Telemetri, ak Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Non kanal Kòd QR ikòn aplikasyon an @@ -314,7 +376,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -392,27 +455,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -433,25 +496,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Rejyon + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -468,10 +533,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -483,7 +551,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -501,7 +569,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -516,7 +586,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Public Key Private Key Admin Key @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-hu-rHU/strings.xml b/app/src/main/res/values-hu-rHU/strings.xml index 97b703de7..a72029560 100644 --- a/app/src/main/res/values-hu-rHU/strings.xml +++ b/app/src/main/res/values-hu-rHU/strings.xml @@ -53,29 +53,91 @@ Nem Ismert Publikus Kulcs Hibás munkamenet kulcs Nem Engedélyezett Publikus Kulcs - Alkalmazáshoz csatlakoztatott vagy önálló üzenetküldő eszköz. - Olyan eszköz, amely nem továbbít más eszközöktől érkező csomagokat. - Hálózati lefedettséget bővítő infrastruktúra-csomópont, amely továbbítja az üzeneteket. Látható a csomópont-listában. - ROUTER és CLIENT kombinációja. Nem hordozható eszközökhöz. - Hálózati lefedettséget bővítő infrastruktúra-csomópont, amely minimális terheléssel továbbítja az üzeneteket. Nem látható a listában. - GPS-pozíció csomagok elsődleges sugárzása. - Telemetriai csomagok elsődleges sugárzása. - ATAK rendszerkommunikációra optimalizált, csökkenti a rutin-sugárzásokat. - Eszköz, amely csak szükség esetén sugároz, rejtettség vagy energiatakarékosság miatt. - Rendszeresen sugározza a helyzetet az alapértelmezett csatornára az eszköz visszakeresésének segítésére. - Automatikus TAK PLI sugárzást engedélyez és csökkenti a rutin-sugárzásokat. - Infrastruktúra-csomópont, amely minden csomagot egyszer újraküld, de csak az összes más mód után, extra lefedettséget biztosítva a helyi klasztereknek. Látható a listában. - Újrasugároz minden észlelt üzenetet, ha az a privát csatornánkon volt, vagy más, azonos LoRa-paraméterű hálózatból származik. - Ugyanaz, mint az „ALL” viselkedés, de kihagyja a csomag dekódolását és egyszerűen újrasugározza. Csak Ismétlő (Repeater) szerepkörben elérhető; más szerepkörben az „ALL” mód érvényesül. - Figyelmen kívül hagyja a nyílt vagy nem dekódolható idegen hálózatok üzeneteit. Csak a csomópont helyi elsődleges / másodlagos csatornáin sugároz újra. - Hasonló a „LOCAL ONLY”-hoz, de tovább megy: figyelmen kívül hagyja az olyan csomópontok üzeneteit is, amelyek nem szerepelnek az ismert listában. - Csak SENSOR, TRACKER és TAK_TRACKER szerepkörben engedélyezett; minden újraküldést letilt, hasonlóan a CLIENT_MUTE szerephez. - Figyelmen kívül hagyja a nem szabványos portszámú csomagokat (pl. TAK, RangeTest, PaxCounter), és csak a szabványos portszámúakat sugározza újra: NodeInfo, Text, Position, Telemetry, Routing. + Client + Alkalmazáshoz csatlakoztatott vagy önálló üzenetküldő eszköz. + Client Mute + Olyan eszköz, amely nem továbbít más eszközöktől érkező csomagokat. + Router + Hálózati lefedettséget bővítő infrastruktúra-csomópont, amely továbbítja az üzeneteket. Látható a csomópont-listában. + Router Client + ROUTER és CLIENT kombinációja. Nem hordozható eszközökhöz. + Repeater + Hálózati lefedettséget bővítő infrastruktúra-csomópont, amely minimális terheléssel továbbítja az üzeneteket. Nem látható a listában. + Tracker + GPS-pozíció csomagok elsődleges sugárzása. + Sensor + Telemetriai csomagok elsődleges sugárzása. + TAK + ATAK rendszerkommunikációra optimalizált, csökkenti a rutin-sugárzásokat. + Client Hidden + Eszköz, amely csak szükség esetén sugároz, rejtettség vagy energiatakarékosság miatt. + Lost and Found + Rendszeresen sugározza a helyzetet az alapértelmezett csatornára az eszköz visszakeresésének segítésére. + TAK Tracker + Automatikus TAK PLI sugárzást engedélyez és csökkenti a rutin-sugárzásokat. + Router Late + Infrastruktúra-csomópont, amely minden csomagot egyszer újraküld, de csak az összes más mód után, extra lefedettséget biztosítva a helyi klasztereknek. Látható a listában. + All + Újrasugároz minden észlelt üzenetet, ha az a privát csatornánkon volt, vagy más, azonos LoRa-paraméterű hálózatból származik. + All Skip Decoding + Ugyanaz, mint az „ALL” viselkedés, de kihagyja a csomag dekódolását és egyszerűen újrasugározza. Csak Ismétlő (Repeater) szerepkörben elérhető; más szerepkörben az „ALL” mód érvényesül. + Local Only + Figyelmen kívül hagyja a nyílt vagy nem dekódolható idegen hálózatok üzeneteit. Csak a csomópont helyi elsődleges / másodlagos csatornáin sugároz újra. + Known Only + Hasonló a „LOCAL ONLY”-hoz, de tovább megy: figyelmen kívül hagyja az olyan csomópontok üzeneteit is, amelyek nem szerepelnek az ismert listában. + Semmi + Csak SENSOR, TRACKER és TAK_TRACKER szerepkörben engedélyezett; minden újraküldést letilt, hasonlóan a CLIENT_MUTE szerephez. + Core Portnums Only + Figyelmen kívül hagyja a nem szabványos portszámú csomagokat (pl. TAK, RangeTest, PaxCounter), és csak a szabványos portszámúakat sugározza újra: NodeInfo, Text, Position, Telemetry, Routing. A támogatott gyorsulásmérők dupla koppintását kezelje felhasználói gombnyomásként. - Letiltja a GPS be/ki kapcsolásához szükséges hármas gombnyomást. - Szabályozza az eszköz villogó LED-jét. A legtöbb eszköznél legfeljebb 4 LED egyikét vezérli; a töltő és GPS LED nem állítható. + Send a position on the primary channel when the user button is triple clicked. + Szabályozza az eszköz villogó LED-jét. A legtöbb eszköznél legfeljebb 4 LED egyikét vezérli; a töltő és GPS LED nem állítható. + Time zone for dates on the device screen and log. Meghatározza, hogy az MQTT-n és a PhoneAPI-n kívül a NeighborInfo továbbítva legyen-e LoRa-n is. Nem érhető el alapértelmezett kulcsú és nevű csatornán. - Nyilvános kulcs + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Csatorna neve QR kód alkalmazás ikonja @@ -314,7 +376,8 @@ Alacsony töltöttség: %s Alacsony töltöttségű értesítések (kedvenc csomópontok) Légnyomás - Mesh UDP-n keresztül engedélyezve + Enabled + UDP Broadcast UDP-beállítások Utoljára hallva: %2$s
Utolsó pozíció: %3$s
Akkumulátor: %4$s]]> Saját pozíció váltása @@ -392,27 +455,27 @@ Figyelt GPIO láb Érzékelési ravasztípus INPUT_PULLUP mód használata - Eszközbeállítások - Szerepkör - PIN_BUTTON újradefiniálása - PIN_BUZZER újradefiniálása - Újrasugárzási mód - NodeInfo sugárzási intervallum (másodperc) - Dupla koppintás gombnyomásként - Hármas kattintás letiltása - POSIX időzóna - LED-aktivitásjelző letiltása - Kijelző beállítások - Kijelző-időtúllépés (másodperc) - GPS-koordináta formátum - Automatikus képernyőváltás (másodperc) + Eszköz + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Kijelző + Screen on for + Carousel interval Iránytű észak felül Kijelző megfordítása Mértékegységek megjelenítése - OLED automatikus felismerés felülbírálása + OLED type Kijelző mód - Címsor félkövér - Kijelző ébresztése koppintásra vagy mozgásra + Always point north + Bold Heading + Wake on tap or motion Iránytű tájolás Külső értesítés beállításai Külső értesítés engedélyezve @@ -433,25 +496,27 @@ Ismétlő riasztás időkorlát (másodperc) Csengőhang I2S használata csipogóként - LoRa beállítások - Modem-előbeállítás használata - Modem-előbeállítás + LoRa + Options + Haladó + Use Preset + Presets Sávszélesség - Terjedési tényező - Kódolási ráta + Spread Factor + Coding Rate Frekvenciaeltolás (MHz) - Régió (frekvenciaterv) - Ugráskorlát - Adás engedélyezve - Adóteljesítmény (dBm) - Frekvenciasáv + Régió + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Duty Cycle felülbírálása Bejövő figyelmen kívül hagyása - SX126X RX erősített érzékenység - Frekvencia felülbírálása (MHz) + RX Boosted Gain + Frequency Override PA ventilátor letiltva MQTT figyelmen kívül hagyása - MQTT jóváhagyás + Ok to MQTT MQTT beállítások MQTT engedélyezve Cím @@ -468,10 +533,13 @@ Szomszéd-információ engedélyezve Frissítési intervallum (másodperc) Továbbítás LoRa-n keresztül - Hálózati beállítások + Hálózat + WiFi Options + Enabled WiFi engedélyezve SSID PSK + Ethernet Options Ethernet engedélyezve NTP szerver rsyslog szerver @@ -483,7 +551,7 @@ Paxcounter engedélyezve WiFi RSSI küszöbérték (alapértelmezés: -80) BLE RSSI küszöbérték (alapértelmezés: -80) - Pozíció beállítások + Pozíció Pozíció-sugárzási intervallum (másodperc) Intelligens pozíció engedélyezve Intelligens sugárzás minimális távolság (méter) @@ -501,7 +569,9 @@ Pozíciójelzők Energia-beállítások Energiatakarékos mód engedélyezése + Shutdown on power loss Kikapcsolás akkumulátor késleltetéssel (másodperc) + ADC multiplier override ADC szorzó felülbírálási arány Bluetooth-várakozási idő (másodperc) Szuper mélyalvás időtartam (másodperc) @@ -516,7 +586,9 @@ Távoli hardver engedélyezve Nem definiált pinek elérésének engedélyezése Elérhető pinek - Biztonsági beállítások + Biztonság + Direct Message Key + Admin Keys Nyilvános kulcs Privát kulcs Admin kulcs @@ -785,4 +857,5 @@ A nyilvános internetes átjáróból érkező üzenetek továbbításra kerülnek a helyi mesh hálózatra. A zéró-ugrási szabály miatt az alapértelmezett MQTT szerver forgalma nem terjed tovább ennél az eszköznél. Ikonmagyarázatok Az elsődleges csatornán a pozíció letiltása lehetővé teszi az időszakos pozíció-sugárzást az első olyan másodlagos csatornán, ahol a pozíció engedélyezett, ellenkező esetben kézi pozíciólekérés szükséges. + Device configuration diff --git a/app/src/main/res/values-is-rIS/strings.xml b/app/src/main/res/values-is-rIS/strings.xml index b63b98de4..bed796386 100644 --- a/app/src/main/res/values-is-rIS/strings.xml +++ b/app/src/main/res/values-is-rIS/strings.xml @@ -53,29 +53,91 @@ Unknown Public Key Bad session key Public Key unauthorized - App connected or standalone messaging device. - Device that does not forward packets from other devices. - Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. - Combination of both ROUTER and CLIENT. Not for mobile devices. - Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. - Broadcasts GPS position packets as priority. - Broadcasts telemetry packets as priority. - Optimized for ATAK system communication, reduces routine broadcasts. - Device that only broadcasts as needed for stealth or power savings. - Broadcasts location as message to default channel regularly for to assist with device recovery. - Enables automatic TAK PLI broadcasts and reduces routine broadcasts. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. - Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. - Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + App connected or standalone messaging device. + Client Mute + Device that does not forward packets from other devices. + Router + Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. + Router Client + Combination of both ROUTER and CLIENT. Not for mobile devices. + Repeater + Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. + Tracker + Broadcasts GPS position packets as priority. + Sensor + Broadcasts telemetry packets as priority. + TAK + Optimized for ATAK system communication, reduces routine broadcasts. + Client Hidden + Device that only broadcasts as needed for stealth or power savings. + Lost and Found + Broadcasts location as message to default channel regularly for to assist with device recovery. + TAK Tracker + Enables automatic TAK PLI broadcasts and reduces routine broadcasts. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. + All Skip Decoding + Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. + None + Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. + Core Portnums Only + Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Heiti rásar QR kóði tákn smáforrits @@ -314,7 +376,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -392,27 +455,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -433,25 +496,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Svæði + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -468,10 +533,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -483,7 +551,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -501,7 +569,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -516,7 +586,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Public Key Private Key Admin Key @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-it-rIT/strings.xml b/app/src/main/res/values-it-rIT/strings.xml index e1919a697..efe9e1834 100644 --- a/app/src/main/res/values-it-rIT/strings.xml +++ b/app/src/main/res/values-it-rIT/strings.xml @@ -53,29 +53,91 @@ Chiave Pubblica Sconosciuta Chiave di sessione non valida Chiave Pubblica non autorizzata - App collegata o dispositivo di messaggistica standalone. - Dispositivo che non inoltra pacchetti da altri dispositivi. - Nodo d\'infrastruttura per estendere la copertura di rete tramite inoltro dei messaggi. Visibile nell\'elenco dei nodi. - Combinazione di ROUTER e CLIENT. Non per dispositivi mobili. - Nodo d\'infrastruttura per estendere la copertura della rete tramite inoltro dei messaggi con overhead minimo. Non visibile nell\'elenco dei nodi. - Dà priorità alla trasmissione di pacchetti di posizione GPS. - Dà priorità alla trasmissione di pacchetti di telemetria. - Ottimizzato per la comunicazione del sistema ATAK, riduce le trasmissioni di routine. - Dispositivo che trasmette solo quando necessario, per risparmiare energia o restare invisibile. - Trasmette a intervalli regolari la posizione come messaggio nel canale predefinito per aiutare il recupero del dispositivo. - Abilita le trasmissioni automatiche TAK PLI e riduce le trasmissioni di routine. - Nodo dell\'infrastruttura che ritrasmette sempre i pacchetti una volta ma solo dopo tutte le altre modalità, garantendo una copertura aggiuntiva per i cluster locali. Visibile nella lista dei nodi. - Ritrasmettere qualsiasi messaggio osservato, se era sul nostro canale privato o da un\'altra mesh con gli stessi parametri lora. - Stesso comportamento di ALL ma salta la decodifica dei pacchetti e semplicemente li ritrasmette. Disponibile solo nel ruolo Repeater. Attivando questo su qualsiasi altro ruolo, si otterrà il comportamento di ALL. - Ignora i messaggi osservati da mesh esterne aperte o quelli che non possono essere decifrati. Ritrasmette il messaggio solo nei canali locali primario / secondario dei nodi. - Ignora i messaggi osservati da mesh esterne come fa LOCAL ONLY, ma in più ignora i messaggi da nodi non presenti nella lista dei nodi conosciuti. - Permesso solo per i ruoli SENSOR, TRACKER e TAK_TRACKER, questo inibirà tutte le ritrasmissioni, come il ruolo CLIENT_MUTE. - Ignora pacchetti da numeri di porta non standard come: TAK, RangeTest, PaxCounter, ecc. Ritrasmette solo pacchetti con numeri di porta standard: NodeInfo, Testo, Posizione, Telemetria e Routing. + Client + App collegata o dispositivo di messaggistica standalone. + Client Mute + Dispositivo che non inoltra pacchetti da altri dispositivi. + Router + Nodo d\'infrastruttura per estendere la copertura di rete tramite inoltro dei messaggi. Visibile nell\'elenco dei nodi. + Router Client + Combinazione di ROUTER e CLIENT. Non per dispositivi mobili. + Repeater + Nodo d\'infrastruttura per estendere la copertura della rete tramite inoltro dei messaggi con overhead minimo. Non visibile nell\'elenco dei nodi. + Tracker + Dà priorità alla trasmissione di pacchetti di posizione GPS. + Sensore + Dà priorità alla trasmissione di pacchetti di telemetria. + TAK + Ottimizzato per la comunicazione del sistema ATAK, riduce le trasmissioni di routine. + Client Hidden + Dispositivo che trasmette solo quando necessario, per risparmiare energia o restare invisibile. + Lost and Found + Trasmette a intervalli regolari la posizione come messaggio nel canale predefinito per aiutare il recupero del dispositivo. + TAK Tracker + Abilita le trasmissioni automatiche TAK PLI e riduce le trasmissioni di routine. + Router Late + Nodo dell\'infrastruttura che ritrasmette sempre i pacchetti una volta ma solo dopo tutte le altre modalità, garantendo una copertura aggiuntiva per i cluster locali. Visibile nella lista dei nodi. + Tutti + Ritrasmettere qualsiasi messaggio osservato, se era sul nostro canale privato o da un\'altra mesh con gli stessi parametri lora. + All Skip Decoding + Stesso comportamento di ALL ma salta la decodifica dei pacchetti e semplicemente li ritrasmette. Disponibile solo nel ruolo Repeater. Attivando questo su qualsiasi altro ruolo, si otterrà il comportamento di ALL. + Solo Locale + Ignora i messaggi osservati da mesh esterne aperte o quelli che non possono essere decifrati. Ritrasmette il messaggio solo nei canali locali primario / secondario dei nodi. + Known Only + Ignora i messaggi osservati da mesh esterne come fa LOCAL ONLY, ma in più ignora i messaggi da nodi non presenti nella lista dei nodi conosciuti. + Nessuno + Permesso solo per i ruoli SENSOR, TRACKER e TAK_TRACKER, questo inibirà tutte le ritrasmissioni, come il ruolo CLIENT_MUTE. + Core Portnums Only + Ignora pacchetti da numeri di porta non standard come: TAK, RangeTest, PaxCounter, ecc. Ritrasmette solo pacchetti con numeri di porta standard: NodeInfo, Testo, Posizione, Telemetria e Routing. Considera il doppio tocco sugli accelerometri supportati come la pressione di un pulsante utente. - Disabilita la tripla pressione del pulsante utente per abilitare o disabilitare il GPS. - Controlla il LED lampeggiante del dispositivo. Per la maggior parte dei dispositivi questo controllerà uno dei LED (fino a 4), il LED dell\'alimentazione e il LED del GPS non sono controllabili. + Send a position on the primary channel when the user button is triple clicked. + Controlla il LED lampeggiante del dispositivo. Per la maggior parte dei dispositivi questo controllerà uno dei LED (fino a 4), il LED dell\'alimentazione e il LED del GPS non sono controllabili. + Time zone for dates on the device screen and log. Se oltre a inviarli tramite MQTT e PhoneAPI, i dati NeighborInfo devono essere trasmessi tramite LoRa. Non disponibile su un canale con chiave e nome predefiniti. - Chiave Pubblica + Per quanto tempo lo schermo rimane acceso dopo che il pulsante utente viene premuto o i messaggi vengono ricevuti. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Intervallo Di Trasmissione + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Posizione Fissa + Altitudine + Intervallo di Aggiornamento + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Nome del canale Codice QR Icona dell\'applicazione @@ -314,7 +376,8 @@ Poca energia rimanente nella batteria: %s Notifiche batteria scarica (nodi preferiti) Pressione barometrica - Mesh via UDP abilitato + Abilitato + UDP Broadcast Configurazione UDP Ricevuto l\'ultima volta: %2$s
Posizione più recente: %3$s
Batteria: %4$s]]> Attiva/disattiva posizione @@ -392,27 +455,27 @@ Pin GPIO da monitorare Tipo di trigger di rilevamento Usa modalità INPUT_PULLUP - Configurazione Dispositivo - Ruolo - Ridefinisci PIN_BUTTON - Ridefinisci PIN_BUZZER + Dispositivo + Ruolo Del Dispositivo + Button GPIO + Buzzer GPIO Modalità ritrasmissione - Intervallo di trasmissione NodeInfo (secondi) - Doppio tocco come pressione pulsante - Disabilita triplo-click - POSIX Timezone - Disabilita il LED del battito cardiaco - Configurazione Schermo - Timeout schermo (secondi) - Formato coordinate GPS - Cambia schermate automaticamente (secondi) + Intervallo Di Trasmissione Info Nodo + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Schermo + Screen on for + Carousel interval Tieni in alto il nord della bussola Capovolgi schermo Unità di misura visualizzata - Sovrascrivi rilevamento automatico OLED + OLED type Modalità schermo - Titoli in grassetto - Accendi lo schermo al tocco o al movimento + Always point north + Intestazione in grassetto + Wake on tap or motion Orientamento bussola Configurazione Notifiche Esterne Notifica esterna attivata @@ -433,25 +496,27 @@ Timeout chiusura popup (secondi) Suoneria Usa I2S come buzzer - Configurazione LoRa - Usa preimpostazioni del modem - Configurazione Modem + LoRa + Options + Avanzate + Usa Preset + Preset Larghezza di banda - Fattore di spread - Velocità di codifica + Spread Factor + Coding Rate Offset di frequenza (MHz) - Regione (band plan) - Limite di hop - TX attivata - Potenza TX (dBm) + Regione + Numero di hop + Trasmissione Abilitata + Potenza Di Trasmissione Slot di frequenza Ignora limite di Duty Cycle Ignora in arrivo - Migliora guadagno in RX su SX126X - Sovrascrivi la frequenza (MHz) + RX Boosted Gain + Frequency Override Ventola PA disabilitata Ignora MQTT - OK per MQTT + Ok to MQTT Configurazione MQTT MQTT abilitato Indirizzo @@ -468,10 +533,13 @@ Info Nodi Vicini abilitato Intervallo di aggiornamento (secondi) Trasmettere su LoRa - Configurazione Della Rete + Rete + WiFi Options + Abilitato WiFi abilitato SSID PSK + Ethernet Options Ethernet abilitato Server NTP server rsyslog @@ -483,7 +551,7 @@ Paxcounter abilitato Soglia RSSI WiFi (valore predefinito -80) Soglia RSSI BLE (valore predefinito -80) - Configurazione Posizione + Posizione Intervallo trasmissione posizione (secondi) Posizione smart abilitata Distanza minima per trasmissione smart (metri) @@ -501,7 +569,9 @@ Opzioni posizione Configurazione Alimentazione Abilita modalità risparmio energetico + Shutdown on power loss Ritardo spegnimento a batteria (secondi) + ADC multiplier override Sovrascrivi rapporto moltiplicatore ADC Durata attesa Bluetooth (secondi) Durata super deep sleep (secondi) @@ -516,7 +586,9 @@ Hardware Remoto abilitato Consenti accesso a pin non definiti Pin disponibili - Configurazione Sicurezza + Sicurezza + Direct Message Key + Admin Keys Chiave Pubblica Chiave Privata Chiave Amministratore @@ -788,4 +860,5 @@ I messaggi provenienti da un gateway Internet pubblico vengono inoltrati alla rete mesh locale. A causa della politica zero-hop, il traffico proveniente dal server MQTT predefinito non si propagherà oltre questo dispositivo. Significato delle icone Disabilitando la posizione sul canale primario è possibile trasmettere periodicamente la posizione sul primo canale secondario con la posizione abilitata, altrimenti è necessaria una richiesta manuale della posizione. + Device configuration diff --git a/app/src/main/res/values-iw-rIL/strings.xml b/app/src/main/res/values-iw-rIL/strings.xml index 93cfb51d3..7925dfb40 100644 --- a/app/src/main/res/values-iw-rIL/strings.xml +++ b/app/src/main/res/values-iw-rIL/strings.xml @@ -53,29 +53,91 @@ Unknown Public Key Bad session key Public Key unauthorized - App connected or standalone messaging device. - Device that does not forward packets from other devices. - Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. - Combination of both ROUTER and CLIENT. Not for mobile devices. - Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. - Broadcasts GPS position packets as priority. - Broadcasts telemetry packets as priority. - Optimized for ATAK system communication, reduces routine broadcasts. - Device that only broadcasts as needed for stealth or power savings. - Broadcasts location as message to default channel regularly for to assist with device recovery. - Enables automatic TAK PLI broadcasts and reduces routine broadcasts. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. - Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. - Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + App connected or standalone messaging device. + Client Mute + Device that does not forward packets from other devices. + Router + Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. + Router Client + Combination of both ROUTER and CLIENT. Not for mobile devices. + Repeater + Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. + Tracker + Broadcasts GPS position packets as priority. + Sensor + Broadcasts telemetry packets as priority. + TAK + Optimized for ATAK system communication, reduces routine broadcasts. + Client Hidden + Device that only broadcasts as needed for stealth or power savings. + Lost and Found + Broadcasts location as message to default channel regularly for to assist with device recovery. + TAK Tracker + Enables automatic TAK PLI broadcasts and reduces routine broadcasts. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. + All Skip Decoding + Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. + None + Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. + Core Portnums Only + Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug שם הערוץ קוד QR אייקון אפליקציה @@ -318,7 +380,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -396,27 +459,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -437,25 +500,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + אזור + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -472,10 +537,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -487,7 +555,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -505,7 +573,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -520,7 +590,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Public Key Private Key Admin Key @@ -792,4 +864,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-ja-rJP/strings.xml b/app/src/main/res/values-ja-rJP/strings.xml index 93509bf86..4ba551be5 100644 --- a/app/src/main/res/values-ja-rJP/strings.xml +++ b/app/src/main/res/values-ja-rJP/strings.xml @@ -53,29 +53,91 @@ 不明な公開キー セッションキーが不正です 許可されていない公開キー - アプリに接続されているか、スタンドアロンのメッセージングデバイスです。 - このデバイスは他のデバイスからのパケットを転送しません。 - メッセージを中継することでネットワークの通信範囲を拡大するためのインフラストラクチャノード。ノードリストに表示されます。 - ROUTERとCLIENTの組み合わせ。モバイルデバイス向けではありません。 - 最小限のオーバーヘッドでメッセージを中継することでネットワークの通信範囲を拡大するためのインフラストラクチャノード。ノードリストには表示されません。 - GPSの位置情報パケットを優先してブロードキャストします。 - テレメトリーパケットを優先してブロードキャストします。 - ATAKシステムとの通信に最適化し、定期的なブロードキャストを削減します。 - ステルスまたは電力節約のため、必要に応じてのみブロードキャストするデバイス。 - デバイスを見つけやすくするために、デバイス自身の位置情報をメッセージ形式で定期的にデフォルトのチャンネルにブロードキャストします。 - TAK PLIの自動ブロードキャストを有効にし、ルーチンブロードキャストを削減します。 - 常にパケットを再ブロードキャストするインフラストラクチャノードは、他のすべてのモードの後にのみ、ローカルクラスタの追加カバレッジを確保します。ノードリストに表示されます。 - 受信したメッセージが、参加しているプライベートチャンネル上のもの、または同じLoRaパラメータを持つ別のメッシュからのものであれば、それを再ブロードキャストします。 - ALLと同じ動作ですが、パケットのデコードをスキップして単純に再ブロードキャストします。 リピーターロールでのみ使用できます。他のロールに設定すると、ALLの動作になります。 - 開いている外部メッシュや復号できないメッシュからのメッセージを無視します。 ノードのローカルプライマリー/セカンダリーチャンネルでのみメッセージを再ブロードキャストします。 - LOCAL ONLYのような外部メッシュからのメッセージを無視します。 さらに一歩進んで既知のノードリストにないノードからのメッセージを無視します。 - SENSOR、TRACKER、およびTAK_TRACKERロールでのみ許可されています。CLIENT_MUTEロールとは異なり、すべての再ブロードキャストを禁止します。 - TAK、RangeTest、PaxCounterなどの非標準ポート番号からのパケットを無視します。NodeInfo、Text、Position、Telemetry、Routingなどの標準ポート番号を持つパケットのみを再ブロードキャストします。 + Client + アプリに接続されているか、スタンドアロンのメッセージングデバイスです。 + Client Mute + このデバイスは他のデバイスからのパケットを転送しません。 + Router + メッセージを中継することでネットワークの通信範囲を拡大するためのインフラストラクチャノード。ノードリストに表示されます。 + Router Client + ROUTERとCLIENTの組み合わせ。モバイルデバイス向けではありません。 + Repeater + 最小限のオーバーヘッドでメッセージを中継することでネットワークの通信範囲を拡大するためのインフラストラクチャノード。ノードリストには表示されません。 + Tracker + GPSの位置情報パケットを優先してブロードキャストします。 + Sensor + テレメトリーパケットを優先してブロードキャストします。 + TAK + ATAKシステムとの通信に最適化し、定期的なブロードキャストを削減します。 + Client Hidden + ステルスまたは電力節約のため、必要に応じてのみブロードキャストするデバイス。 + Lost and Found + デバイスを見つけやすくするために、デバイス自身の位置情報をメッセージ形式で定期的にデフォルトのチャンネルにブロードキャストします。 + TAK Tracker + TAK PLIの自動ブロードキャストを有効にし、ルーチンブロードキャストを削減します。 + Router Late + 周辺クラスターの通信範囲を拡大させるインフラストラクチャノード。他のすべてのノードが通信し終わった後で、必ずパケットを1回だけ再ブロードキャストする。ノードリストに表示される。 + All + 受信メッセージが、参加しているプライベートチャンネル上のもの、または同じLoRaパラメータを持つ別のメッシュからのものであれば再ブロードキャストします。 + All Skip Decoding + ALLと同じ動作ですが、パケットのデコードをスキップして単純に再ブロードキャストします。 リピーターロールでのみ使用できます。他のロールに設定すると、ALLの動作になります。 + Local Only + 開いている外部メッシュや復号できないメッシュからのメッセージを無視。 ノードのローカルプライマリー/セカンダリーチャンネルでのみメッセージを再ブロードキャスト。 + Known Only + LOCAL ONLYのような外部メッシュからのメッセージを無視します。 さらに一歩進んで既知のノードリストにないノードからのメッセージを無視します。 + なし + SENSOR、TRACKER、およびTAK_TRACKERロールでのみ許可。CLIENT_MUTEロールとは異なり、すべての再ブロードキャストを禁止。 + Core Portnums Only + TAK、RangeTest、PaxCounterなどの非標準ポート番号からのパケットを無視。NodeInfo、Text、Position、Telemetry、Routingなどの標準ポート番号を持つパケットのみを再ブロードキャスト。 加速度センサー搭載デバイスで本体をダブルタップすると、ボタンのプッシュと同じ動作として扱います。 - ボタン3回押しでGPSをオンオフできる機能を無効にします。 - デバイスの点滅するLEDを制御します。ほとんどのデバイスでは、最大4つあるLEDのうちの1つを制御します。充電用LEDとGPS用LEDは制御できません。 + Send a position on the primary channel when the user button is triple clicked. + デバイスの点滅するLEDを制御します。ほとんどのデバイスでは、最大4つあるLEDのうちの1つを制御します。充電用LEDとGPS用LEDは制御できません。 + Time zone for dates on the device screen and log. 近隣ノード情報(NeighborInfo)をMQTTやPhoneAPIへ送信することに加えて、LoRa無線経由でも送信すべきかどうかを設定します。デフォルトの名前とキーが設定されたチャンネルでは利用できません。 - 公開鍵 + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug チャンネル名 QRコード アプリアイコン @@ -313,7 +375,8 @@ バッテリー低残量: %s バッテリー残量低下通知 (お気に入りノード) 大気圧 - UDP経由のメッシュを有効化 + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> 自分の位置を切り替え @@ -391,27 +454,27 @@ モニターのGPIOピン 検出トリガーの種類 INPUT_PULUP モードを使用 - デバイスの設定 - 役割 - PIN_BUTTON を再定義 - PIN_BUZZER を再定義 - 再ブロードキャストモード - 近隣ノード情報のブロードキャスト間隔 (秒) - ボタンとしてダブルタップする - トリプルクリックを無効化 - POSIX 時間帯 - LEDの点滅を無効化 - 表示設定 - 画面のタイムアウト（秒） - GPS座標形式 - 自動画面巻き戻し（秒） + 接続するデバイスを選択 + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + 表示 + Screen on for + Carousel interval ノースアップ表示 画面反転 表示単位 - OLED の自動検出を上書き + OLED type 表示モード - 見出しを太字にする - 画面をタップまたはモーションでスリープ解除 + Always point north + Bold Heading + Wake on tap or motion コンパスの向き 外部通知設定 外部通知を有効にする @@ -432,25 +495,27 @@ 繰り返し通知間隔（秒） 着信メロディ I2Sをブザーとして使用 - LoRa設定 - モデムプリセットを使用 - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets 帯域 - 拡散係数 - コーディングレート + Spread Factor + Coding Rate 周波数オフセット (MHz) - リージョン (周波数プラン) - ホップ制限 - 送信を有効化 - 送信出力（dBm） - 周波数スロット + リージョン + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot デューティサイクルを上書き 着信を無視 - SX126X RXブーストゲイン - 周波数を上書き (MHz) + RX Boosted Gain + Frequency Override PAファン無効 MQTT を無視 - MQTTを許可 + Ok to MQTT MQTT設定 MQTTを有効化 アドレス @@ -467,10 +532,13 @@ 近隣ノード情報を有効化 更新間隔 (秒) LoRaで送信 - ネットワーク設定 + ネットワーク + WiFi Options + Enabled Wi-Fiを有効化 SSID PSK + Ethernet Options イーサネット有効 NTPサーバー rsyslogサーバー @@ -482,7 +550,7 @@ Paxcounter を有効化 WiFi RSSI閾値（デフォルトは -80） BLE RSSI閾値（デフォルトは -80） - 位置情報設定 + 位置 位置情報のブロードキャスト間隔 (秒) スマートポジションを有効化 スマートブロードキャストの最小距離（メートル） @@ -500,7 +568,9 @@ フラグの位置 電源設定 省電力モードを有効化 + Shutdown on power loss 外部電源喪失後の自動シャットダウンまでの待機時間（秒） + ADC multiplier override ADC乗算器のオーバーライド率 Bluetooth接続が一定時間無ければ自動的にオフ（秒） スーパーディープスリープモードの最大継続時間（秒） @@ -515,7 +585,9 @@ リモートハードウェアを有効化 未定義のPINアクセスを許可 使用可能な端子 - セキュリティ設定 + セキュリティ + Direct Message Key + Admin Keys 公開鍵 秘密鍵 管理者キー @@ -787,4 +859,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-ko-rKR/strings.xml b/app/src/main/res/values-ko-rKR/strings.xml index 3332e539f..b5cee4fef 100644 --- a/app/src/main/res/values-ko-rKR/strings.xml +++ b/app/src/main/res/values-ko-rKR/strings.xml @@ -53,29 +53,91 @@ 알 수 없는 공개 키 세션 키 오류 허용되지 않는 공개 키 - 앱과 연결해서 사용하거나 독립형 메시징 장치. - 다른 장치에서 온 패킷을 전달하지 않는 장치. - 메시지를 중계하여 네트워크 범위를 확장하는 인프라 노드. 노드 목록에 표시. - CLIENT와 ROUTER의 조합. 이동형 장치에는 적합하지 않음. - 최소한의 오버헤드로 메시지를 전달하여 네트워크 범위를 확장하기 위한 인프라 노드. 노드 목록에 표시되지 않음. - GPS 위치 정보를 우선적으로 전송. - 텔레메트리 패킷을 우선적으로전송. - ATAK 시스템 통신에 최적화됨, 정기적 전송을 최소화. - 스텔스 또는 절전을 위해 필요한 경우에만 전송. - 분실 장치의 회수를 돕기 위해 기본 채널에 정기적으로 위치 정보를 전송. - TAK PLI 전송을 자동화하고 정기적 전송을 최소화. - 모든 다른 모드의 노드들이 패킷을 재전송한 후에만 항상 한 번씩 패킷을 재전송하여, 로컬 클러스터에 추가적인 커버리지를 보장하는 인프라스트럭처 노드입니다. 노드 목록에 표시. - 관찰된 메시지가 우리 비공개 채널에 있거나, 동일한 LoRa 파라미터를 사용하는 다른 메쉬에서 온 경우 해당 메시지를 재전송합니다. - ALL 역할과 동일하게 동작하지만, 패킷 디코딩을 건너뛰고 단순히 재전송만 수행합니다. Repeater 일때 설정가능. 다른 Role에서는 ALL로 동작. - 오픈되어 있거나 해독할 수 없는 외부 메시에서 관찰된 메시지를 무시합니다. 로컬 기본/보조 채널에서만 메시지를 재브로드캐스트. - LOCAL_ONLY와 유사하게 외부 메쉬에서 관찰된 메시지를 무시하지만, 추가적으로 알려진 목록에 없는 노드의 메시지도 무시합니다. - SENSOR, TRACKER 및 TAK_TRACKER role에서만 허용되며 CLIENT_MUTE role과 마찬가지로 모든 재브로드캐스트를 금지합니다. - TAK, RangeTest, PaxCounter 등과 같은 비표준 포트 번호의 패킷을 무시합니다. NodeInfo, Text, Position, Telemetry 및 Routing과 같은 표준 포트 번호가 있는 패킷만 재브로드캐스트. + Client + 앱과 연결해서 사용하거나 독립형 메시징 장치. + Client Mute + 다른 장치에서 온 패킷을 전달하지 않는 장치. + Router + 메시지를 중계하여 네트워크 범위를 확장하는 인프라 노드. 노드 목록에 표시. + Router Client + CLIENT와 ROUTER의 조합. 이동형 장치에는 적합하지 않음. + Repeater + 최소한의 오버헤드로 메시지를 전달하여 네트워크 범위를 확장하기 위한 인프라 노드. 노드 목록에 표시되지 않음. + Tracker + GPS 위치 정보를 우선적으로 전송. + Sensor + 텔레메트리 패킷을 우선적으로전송. + TAK + ATAK 시스템 통신에 최적화됨, 정기적 전송을 최소화. + Client Hidden + 스텔스 또는 절전을 위해 필요한 경우에만 전송. + Lost and Found + 분실 장치의 회수를 돕기 위해 기본 채널에 정기적으로 위치 정보를 전송. + TAK Tracker + TAK PLI 전송을 자동화하고 정기적 전송을 최소화. + Router Late + 모든 다른 모드의 노드들이 패킷을 재전송한 후에만 항상 한 번씩 패킷을 재전송하여, 로컬 클러스터에 추가적인 커버리지를 보장하는 인프라스트럭처 노드입니다. 노드 목록에 표시. + All + 관찰된 메시지가 우리 비공개 채널에 있거나, 동일한 LoRa 파라미터를 사용하는 다른 메쉬에서 온 경우 해당 메시지를 재전송합니다. + All Skip Decoding + ALL 역할과 동일하게 동작하지만, 패킷 디코딩을 건너뛰고 단순히 재전송만 수행합니다. Repeater 일때 설정가능. 다른 Role에서는 ALL로 동작. + Local Only + 오픈되어 있거나 해독할 수 없는 외부 메시에서 관찰된 메시지를 무시합니다. 로컬 주/보조 채널에서만 메시지를 재브로드캐스트. + Known Only + LOCAL_ONLY와 유사하게 외부 메쉬에서 관찰된 메시지를 무시하지만, 추가적으로 알려진 목록에 없는 노드의 메시지도 무시합니다. + 없음 + SENSOR, TRACKER 및 TAK_TRACKER role에서만 허용되며 CLIENT_MUTE role과 마찬가지로 모든 재브로드캐스트를 금지합니다. + Core Portnums Only + TAK, RangeTest, PaxCounter 등과 같은 비표준 포트 번호의 패킷을 무시합니다. NodeInfo, Text, Position, Telemetry 및 Routing과 같은 표준 포트 번호가 있는 패킷만 재브로드캐스트. 가속도계가 있는 장치를 두 번 탭하여 사용자 버튼과 동일한 동작. - 사용자 버튼 세 번 눌러서 GPS 켬/끔 기능 끄기. - 장치에서 깜빡이는 LED를 제어합니다. 대부분 장치의 경우 최대 4개의 LED 중 하나를 제어할 수 있지만 충전 상태 LED와 GPS 상태 LED는 제어할 수 없습니다. + Send a position on the primary channel when the user button is triple clicked. + 장치에서 깜빡이는 LED를 제어합니다. 대부분 장치의 경우 최대 4개의 LED 중 하나를 제어할 수 있지만 충전 상태 LED와 GPS 상태 LED는 제어할 수 없습니다. + Time zone for dates on the device screen and log. MQTT 및 PhoneAPI로 전송하는 것 외에도, 우리 NeighborInfo는 LoRa를 통해 전송되어야 합니다. 기본 키와 이름을 사용하는 채널에서는 사용할 수 없습니다. - 공개 키 + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + 전송 간격 + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug 채널명 QR코드 앱아이콘 @@ -312,7 +374,8 @@ 배터리 부족: %s 배터리 부족 알림 (즐겨찾기 노드) 기압 - UDP를 통한 메시 활성화 + 활성화 + UDP Broadcast UDP 설정 최근 수신: %2$s
최근 위치: %3$s
배터리: %4$s]]> 내 위치 토글 @@ -390,27 +453,27 @@ 상태 모니터링 GPIO 핀 디텍션 트리거 타입 INPUT_PULLUP 모드 사용 - 장치 설정 - 역할 - PIN_BUTTON 재정의 - PIN_BUZZER 재정의 + 장치 + Device Role + Button GPIO + Buzzer GPIO 중계 모드 - 노드 정보 중계 간격 (초) - 더블 탭하여 버튼 누름 - 세 번 클릭 끄기 - POSIX 시간대 - LED 숨쉬기 끄기 - 화면 설정 - 화면 끄기 시간 (초) - GPS 좌표 포맷 - 화면 자동 전환 (초) + 노드 정보 발송 주기 + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + 화면 + Screen on for + Carousel interval 나침반 상단을 북쪽으로 고정 화면 뒤집기 단위 표시 - OLED 자동 감지 + OLED type 디스플레이 모드 - 상태표시줄 볼드체 - 탭하거나 모션으로 깨우기 + Always point north + 상태표시줄 볼드체 + Wake on tap or motion 나침반 방향 외부 알림 설정 외부 알림 활성화 @@ -431,25 +494,27 @@ 반복 종료 시간 (초) 벨소리 I2S 부저 사용 - LoRa 설정 - 모뎀 프리셋 사용 - 모뎀 프리셋 + LoRa + Options + 고급 + 프리셋 사용 + Presets 대역폭 - Spread factor + Spread Factor Coding rate 주파수 오프셋 (MHz) - 지역 (주파수 지정) - Hop 제한 - 송신 활성화 - 송신 전력 (dBm) + 지역 + Hops 수 + 전송 활성화 + 전송 출력 주파수 슬롯 Duty Cycle 무시 수신 무시 - SX126X 수신 부스트 gain - 프리셋 주파수 무시하고 해당 주파수 사용 (Mhz) + RX Boosted Gain + Frequency Override PA fan 비활성화됨 MQTT로 부터 수신 무시 - MQTT로 전송 허용 + Ok to MQTT MQTT 설정 MQTT 활성화 서버 주소 @@ -466,10 +531,13 @@ 이웃 정보 활성화 업데이트 간격 (초) LoRa로 전송 - 네트워크 설정 + 네트워크 + WiFi Options + 활성화 WiFi 활성화 SSID PSK + Ethernet Options 이더넷 활성화 NTP 서버 rsyslog 서버 @@ -481,7 +549,7 @@ 팍스카운터 활성화 WiFi RSSI 임계값 (기본값 -80) BLE RSSI 임계값 (기본값 -80) - 위치 설정 + 위치 위치 송신 간격 (초) 스마트 위치 활성화 스마트 위치 사용 최소 거리 간격 (m) @@ -499,7 +567,9 @@ 위치 전송값 옵션 전원 설정 저젼력 모드 설정 + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -514,7 +584,9 @@ 원격 하드웨어 활성화 Allow undefined pin access Available pins - 보안 설정 + 보안 + Direct Message Key + Admin Keys 공개 키 개인 키 Admin 키 @@ -786,4 +858,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-lt-rLT/strings.xml b/app/src/main/res/values-lt-rLT/strings.xml index 78558ba6e..dce364cc0 100644 --- a/app/src/main/res/values-lt-rLT/strings.xml +++ b/app/src/main/res/values-lt-rLT/strings.xml @@ -53,29 +53,91 @@ Nežinomas viešasis raktas Blogas sesijos raktas Viešasis raktas nepatvirtintas - Programėlė prijungta prie atskiro susirašinėjimo įtaiso. - Įtaisas kuris nepersiunčia kitų įtaisų paketų. - Stacionarus aukštuminis įtaisas geresniam tinklo padengimui. Matomas node`ų sąraše. - ROUTER ir CLIENT kombinacija. Neskirta mobiliems įtaisams. - Stacionarus įtaisas tinklo išplėtimui, persiunčiantis žinutes. Nerodomas įtaisų sąraše. - Pirmenybinis GPS pozicijos paketų siuntimas - Pirmenybinis telemetrijos paketų siuntimas - Optimizuota ATAK komunikacijai, sumažinta rutininių transliacijų - Įtaisas transliuojantis tik prireikus. Naudojama slaptumo ar energijos taupymui. - Reguliariai siunčia GPS pozicijos informaciją į pagrindinį kanalą, lengvesniam įtaiso radimui. - Įgalina automatines TAK PLI transliacijas ir sumažina rutininių transliacijų kiekį. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Persiųsti visas žinutes, nesvarbu jos iš Jūsų privataus tinklo ar iš kito tinklo su analogiškais LoRa parametrais. - Taip pat kaip ir VISI bet nebando dekoduoti paketų ir juos tiesiog persiunčia. Galima naudoti tik Repeater rolės įtaise. Įjungus bet kokiame kitame įtaise - veiks tiesiog kaip VISI. - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. - Leidžiama tik SENSOR, TRACKER ar TAK_TRACKER rolių įtaisams. Tai užblokuos visas retransliacijas, ne taip kaip CLIENT_MUTE atveju. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + Programėlė prijungta prie atskiro susirašinėjimo įtaiso. + Client Mute + Įtaisas kuris nepersiunčia kitų įtaisų paketų. + Router + Stacionarus aukštuminis įtaisas geresniam tinklo padengimui. Matomas node`ų sąraše. + Router Client + ROUTER ir CLIENT kombinacija. Neskirta mobiliems įtaisams. + Repeater + Stacionarus įtaisas tinklo išplėtimui, persiunčiantis žinutes. Nerodomas įtaisų sąraše. + Tracker + Pirmenybinis GPS pozicijos paketų siuntimas + Sensor + Pirmenybinis telemetrijos paketų siuntimas + TAK + Optimizuota ATAK komunikacijai, sumažinta rutininių transliacijų + Client Hidden + Įtaisas transliuojantis tik prireikus. Naudojama slaptumo ar energijos taupymui. + Lost and Found + Reguliariai siunčia GPS pozicijos informaciją į pagrindinį kanalą, lengvesniam įtaiso radimui. + TAK Tracker + Įgalina automatines TAK PLI transliacijas ir sumažina rutininių transliacijų kiekį. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Persiųsti visas žinutes, nesvarbu jos iš Jūsų privataus tinklo ar iš kito tinklo su analogiškais LoRa parametrais. + All Skip Decoding + Taip pat kaip ir VISI bet nebando dekoduoti paketų ir juos tiesiog persiunčia. Galima naudoti tik Repeater rolės įtaise. Įjungus bet kokiame kitame įtaise - veiks tiesiog kaip VISI. + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. + Nėra + Leidžiama tik SENSOR, TRACKER ar TAK_TRACKER rolių įtaisams. Tai užblokuos visas retransliacijas, ne taip kaip CLIENT_MUTE atveju. + Core Portnums Only + Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. - Atjungia galimybė trigubu paspaudimu įgalinti arba išjungti GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Viešasis raktas + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Kanalo pavadinimas QR kodas aplikacijos piktograma @@ -318,7 +380,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -396,27 +459,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -437,25 +500,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Regionas + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -472,10 +537,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -487,7 +555,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -505,7 +573,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -520,7 +590,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Viešasis raktas Privatus raktas Admin Key @@ -792,4 +864,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-nl-rNL/strings.xml b/app/src/main/res/values-nl-rNL/strings.xml index aa8bce2e3..20ab9fc5f 100644 --- a/app/src/main/res/values-nl-rNL/strings.xml +++ b/app/src/main/res/values-nl-rNL/strings.xml @@ -53,29 +53,91 @@ Onbekende publieke sleutel Ongeldige sessiesleutel Publieke sleutel onbevoegd - Toestel geeft geen pakketten door van andere toestellen. - Apparaat stuurt geen pakketten van andere apparaten. - Infrastructuur node om netwerk bereik te vergroten door berichten door te geven. Zichtbare in noden lijst. - Combinatie van ROUTER en CLIENT. Niet voor mobiele toestellen. - Infrastructuur node om netwerk bereik te vergroten door berichten door te geven zonder overtolligheid. Niet zichtbaar in noden lijst. - Zendt GPS-positiepakketten met prioriteit uit. - Zendt telemetriepakketten met prioriteit uit. - Geoptimaliseerd voor ATAK-systeemcommunicatie, beperkt routine uitzendingen. - Apparaat dat alleen uitzendt als dat nodig is voor stealth of energiebesparing. - Zend locatie regelmatig als bericht via het standaard kanaal voor zoektocht apparaat. - Activeer automatisch zenden TAK PLI en beperk routine zendingen. - Infrastructuurknooppunt dat altijd pakketten één keer opnieuw uitzendt, maar pas nadat alle andere modi zijn voltooid, om extra dekking te bieden voor lokale clusters. Zichtbaar in de lijst met knooppunten. - Herzend ontvangen berichten indien ontvangen op eigen privé kanaal of van een ander toestel met dezelfde lora instellingen. - Hetzelfde gedrag als ALL maar sla pakketdecodering over en herzendt opnieuw. Alleen beschikbaar in Repeater rol. Het instellen van dit op andere rollen resulteert in ALL gedrag. - Negeert waargenomen berichten van open vreemde mazen of die welke niet kunnen decoderen. Alleen heruitzenden bericht op de nodes lokale primaire / secundaire kanalen. - Negeert alleen waargenomen berichten van vreemde meshes zoals LOCAL ONLY, maar gaat een stap verder door ook berichten van knooppunten te negeren die nog niet in de bekende lijst van knooppunten staan. - Alleen toegestaan voor SENSOR, TRACKER en TAK_TRACKER rollen, dit zal alle heruitzendingen beperken, niet in tegenstelling tot CLIENT_MUTE rol. - Negeert pakketten van niet-standaard portnums, zoals: TAK, RangeTest, PaxCounter, etc. Herzendt alleen pakketten met standaard portnummers: NodeInfo, Text, Positie, Telemetry, en Routing. + Client + Toestel geeft geen pakketten door van andere toestellen. + Client Mute + Apparaat stuurt geen pakketten van andere apparaten. + Router + Infrastructuur node om netwerk bereik te vergroten door berichten door te geven. Zichtbare in noden lijst. + Router Client + Combinatie van ROUTER en CLIENT. Niet voor mobiele toestellen. + Repeater + Infrastructuur node om netwerk bereik te vergroten door berichten door te geven zonder overtolligheid. Niet zichtbaar in noden lijst. + Tracker + Zendt GPS-positiepakketten met prioriteit uit. + Sensor + Zendt telemetriepakketten met prioriteit uit. + TAK + Geoptimaliseerd voor ATAK-systeemcommunicatie, beperkt routine uitzendingen. + Client Hidden + Apparaat dat alleen uitzendt als dat nodig is voor stealth of energiebesparing. + Lost and Found + Zend locatie regelmatig als bericht via het standaard kanaal voor zoektocht apparaat. + TAK Tracker + Activeer automatisch zenden TAK PLI en beperk routine zendingen. + Router Late + Infrastructuurknooppunt dat altijd pakketten één keer opnieuw uitzendt, maar pas nadat alle andere modi zijn voltooid, om extra dekking te bieden voor lokale clusters. Zichtbaar in de lijst met knooppunten. + Alles + Herzend ontvangen berichten indien ontvangen op eigen privé kanaal of van een ander toestel met dezelfde lora instellingen. + All Skip Decoding + Hetzelfde gedrag als ALL maar sla pakketdecodering over en herzendt opnieuw. Alleen beschikbaar in Repeater rol. Het instellen van dit op andere rollen resulteert in ALL gedrag. + Local Only + Negeert waargenomen berichten van open vreemde mazen of die welke niet kunnen decoderen. Alleen heruitzenden bericht op de nodes lokale primaire / secundaire kanalen. + Known Only + Negeert alleen waargenomen berichten van vreemde meshes zoals LOCAL ONLY, maar gaat een stap verder door ook berichten van knooppunten te negeren die nog niet in de bekende lijst van knooppunten staan. + Geen + Alleen toegestaan voor SENSOR, TRACKER en TAK_TRACKER rollen, dit zal alle heruitzendingen beperken, niet in tegenstelling tot CLIENT_MUTE rol. + Core Portnums Only + Negeert pakketten van niet-standaard portnums, zoals: TAK, RangeTest, PaxCounter, etc. Herzendt alleen pakketten met standaard portnummers: NodeInfo, Text, Positie, Telemetry, en Routing. Behandel een dubbele tik op ondersteunde versnellingsmeters als een knopindruk door de gebruiker. - Schakelt de drie keer indrukken van de gebruikersknop uit voor het in- of uitschakelen van GPS. - Regelt de knipperende LED op het apparaat. Voor de meeste apparaten betreft dit een van de maximaal 4 LEDs; de LED\'s van de lader en GPS zijn niet regelbaar. + Send a position on the primary channel when the user button is triple clicked. + Regelt de knipperende LED op het apparaat. Voor de meeste apparaten betreft dit een van de maximaal 4 LEDs; de LED\'s van de lader en GPS zijn niet regelbaar. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Publieke sleutel + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Kanaalnaam QR-code applicatie icon @@ -314,7 +376,8 @@ Batterij bijna leeg: %s Low battery notifications (favorite nodes) Luchtdruk - Mesh via UDP ingeschakeld + Enabled + UDP Broadcast UDP Configuratie Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Wissel mijn positie @@ -392,27 +455,27 @@ GPIO pin om te monitoren Detectie trigger type Use INPUT_PULLUP mode - Apparaat Configuratie - Functie - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast modus - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - LED-knipperen uitschakelen - Weergave Configuratie - Scherm timeout (seconden) - GPS coördinaten formaat - Auto screen carousel (seconds) + Apparaat + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Weergave + Screen on for + Carousel interval Kompas Noorden bovenaan Scherm omdraaien Geef eenheden weer - Overschrijf OLED automatische detectie + OLED type Weergavemodus - Heading bold - Scherm inschakelen bij aanraking of beweging + Always point north + Bold Heading + Wake on tap or motion Kompas oriëntatie External Notification Config External notification enabled @@ -433,25 +496,27 @@ Nag timeout (seconds) Beltoon Use I2S as buzzer - LoRa Configuratie - Gebruik modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandbreedte - Spread factor - Codering ratio + Spread Factor + Coding Rate Frequentie offset (MHz) - Region (frequency plan) - Hoplimiet - TX ingeschakeld - TX vermogen (dBm) - Frequentie slot + Regio + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Overschrijf Duty Cycle Inkomende negeren - SX126X RX boosted gain - Overschrijf frequentie (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Negeer MQTT - OK to MQTT + Ok to MQTT MQTT Configuratie MQTT ingeschakeld Adres @@ -468,10 +533,13 @@ Neighbor Info enabled Update-interval (seconden) Zend over LoRa - Netwerkconfiguratie + Netwerk + WiFi Options + Enabled Wifi ingeschakeld SSID PSK + Ethernet Options Ethernet ingeschakeld NTP server rsyslog server @@ -483,7 +551,7 @@ Paxcounter ingeschakeld WiFi RSSI drempelwaarde (standaard -80) BLE RSSI drempelwaarde (standaard -80) - Positie Configuratie + Positie Position broadcast interval (seconds) Slimme positie ingeschakeld Smart broadcast minimum distance (meters) @@ -501,7 +569,9 @@ Positie vlaggen Energie configuratie Energiebesparingsmodus inschakelen + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -516,7 +586,9 @@ Externe hardware ingeschakeld Allow undefined pin access Beschikbare pinnen - Beveiligings Configuratie + Beveiliging + Direct Message Key + Admin Keys Publieke sleutel Privésleutel Admin Sleutel @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-no-rNO/strings.xml b/app/src/main/res/values-no-rNO/strings.xml index 65ca6adad..35b9448da 100644 --- a/app/src/main/res/values-no-rNO/strings.xml +++ b/app/src/main/res/values-no-rNO/strings.xml @@ -53,29 +53,91 @@ Ukjent Offentlig Nøkkel Ikke-gyldig sesjonsnøkkel Ikke-autorisert offentlig nøkkel - App-tilkoblet eller frittstående meldingsenhet. - Enhet som ikke videresender pakker fra andre enheter. - Infrastruktur-node for utvidelse av nettverksdekning ved å videresende meldinger. Synlig i nodelisten. - Kombinasjon av ROUTER og CLIENT. Ikke for mobile enheter. - Infrastruktur-node for utvidelse av nettverksdekning ved å videresende meldinger med minimal overhead. Ikke synlig i nodelisten. - Sender GPS-posisjonspakker som prioritert. - Sender telemetripakker som prioritet. - Optimalisert for ATAK systemkommunikasjon, reduserer rutinemessige kringkastinger. - Enhet som bare kringkaster når nødvendig, for stealth eller strømsparing. - Sender sted som melding til standardkanalen regelmessig for å hjelpe med å finne enheten. - Aktiverer automatiske TAK PLI-sendinger og reduserer rutinesendinger. - Infrastrukturnode som alltid sender pakker på nytt én gang, men bare etter alle andre moduser og sikrer ekstra dekning for lokale klynger. Synlig i nodelisten. - Alle observerte meldinger sendes på nytt hvis den var på vår private kanal eller fra en annen mesh med samme lora-parametere. - Samme atferd som alle andre, men hopper over pakkedekoding og sender dem ganske enkelt på nytt. Kun tilgjengelig i Repeater-rollen. Å sette dette på andre roller vil resultere i ALL oppførsel. - Ignorerer observerte meldinger fra fremmede mesh\'er som er åpne eller de som ikke kan dekrypteres. Sender kun meldingen på nytt på nodene lokale primære / sekundære kanaler. - Ignorer observerte meldinger fra utenlandske mesher som KUN LOKALE men tar det steget videre, ved å også ignorere meldinger fra noder som ikke allerede er i nodens kjente liste. - Bare tillatt for SENSOR, TRACKER og TAK_TRACKER roller, så vil dette hindre alle rekringkastinger, ikke i motsetning til CLIENT_MUTE rollen. - Ignorerer pakker fra ikke-standard portnumre som: TAK, RangeTest, PaxCounter, etc. Kringkaster kun pakker med standard portnum: NodeInfo, Text, Position, Telemetrær og Ruting. + Client + App-tilkoblet eller frittstående meldingsenhet. + Client Mute + Enhet som ikke videresender pakker fra andre enheter. + Router + Infrastruktur-node for utvidelse av nettverksdekning ved å videresende meldinger. Synlig i nodelisten. + Router Client + Kombinasjon av ROUTER og CLIENT. Ikke for mobile enheter. + Repeater + Infrastruktur-node for utvidelse av nettverksdekning ved å videresende meldinger med minimal overhead. Ikke synlig i nodelisten. + Tracker + Sender GPS-posisjonspakker som prioritert. + Sensor + Sender telemetripakker som prioritet. + TAK + Optimalisert for ATAK systemkommunikasjon, reduserer rutinemessige kringkastinger. + Client Hidden + Enhet som bare kringkaster når nødvendig, for stealth eller strømsparing. + Lost and Found + Sender sted som melding til standardkanalen regelmessig for å hjelpe med å finne enheten. + TAK Tracker + Aktiverer automatiske TAK PLI-sendinger og reduserer rutinesendinger. + Router Late + Infrastrukturnode som alltid sender pakker på nytt én gang, men bare etter alle andre moduser og sikrer ekstra dekning for lokale klynger. Synlig i nodelisten. + All + Alle observerte meldinger sendes på nytt hvis den var på vår private kanal eller fra en annen mesh med samme lora-parametere. + All Skip Decoding + Samme atferd som alle andre, men hopper over pakkedekoding og sender dem ganske enkelt på nytt. Kun tilgjengelig i Repeater-rollen. Å sette dette på andre roller vil resultere i ALL oppførsel. + Local Only + Ignorerer observerte meldinger fra fremmede mesh\'er som er åpne eller de som ikke kan dekrypteres. Sender kun meldingen på nytt på nodene lokale primære / sekundære kanaler. + Known Only + Ignorer observerte meldinger fra utenlandske mesher som KUN LOKALE men tar det steget videre, ved å også ignorere meldinger fra noder som ikke allerede er i nodens kjente liste. + Ingen + Bare tillatt for SENSOR, TRACKER og TAK_TRACKER roller, så vil dette hindre alle rekringkastinger, ikke i motsetning til CLIENT_MUTE rollen. + Core Portnums Only + Ignorerer pakker fra ikke-standard portnumre som: TAK, RangeTest, PaxCounter, etc. Kringkaster kun pakker med standard portnum: NodeInfo, Text, Position, Telemetrær og Ruting. Behandle dobbeltrykk på støttede akselerometre som brukerknappetrykk. - Deaktiverer trippeltrykk av brukerknappen for å aktivere eller deaktivere GPS. - Kontrollerer blinking av LED på enheten. For de fleste enheter vil dette kontrollere en av de opp til 4 lysdiodene. Laderen og GPS-lysene er ikke kontrollerbare. + Send a position on the primary channel when the user button is triple clicked. + Kontrollerer blinking av LED på enheten. For de fleste enheter vil dette kontrollere en av de opp til 4 lysdiodene. Laderen og GPS-lysene er ikke kontrollerbare. + Time zone for dates on the device screen and log. Hvorvidt det i tillegg for å sende det til MQTT og til telefonen, skal vår Naboinfo overføres over LoRa. Ikke tilgjengelig på en kanal med standardnøkkel og standardnavn. - Offentlig nøkkel + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Kanal Navn QR kode applikasjon ikon @@ -314,7 +376,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -392,27 +455,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -433,25 +496,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Region + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -468,10 +533,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -483,7 +551,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -501,7 +569,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -516,7 +586,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Offentlig nøkkel Privat nøkkel Admin Key @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-pl-rPL/strings.xml b/app/src/main/res/values-pl-rPL/strings.xml index b5e8089f1..c1c475b26 100644 --- a/app/src/main/res/values-pl-rPL/strings.xml +++ b/app/src/main/res/values-pl-rPL/strings.xml @@ -53,29 +53,91 @@ Nieznany klucz publiczny Nieprawidłowy klucz sesji Nieautoryzowany klucz publiczny - Urządzenie samodzielne lub sparowane z aplikacją. - Urządzenie, które nie przekazuje pakietów z innych urządzeń. - Węzeł infrastruktury do rozszerzenia zasięgu sieci poprzez przekazywanie pakietów. Widoczny na liście węzłów. - Połączenie zarówno trybu ROUTER, jak i CLIENT. Nie dla urządzeń przenośnych. - Węzeł infrastruktury do rozszerzenia zasięgu sieci poprzez przekazywanie pakietów z minimalnym narzutem. Niewidoczny na liście węzłów. - Nadaje priorytetowo pakiety z pozycją GPS. - Nadaje priorytetowo pakiety telemetryczne. - Zoptymalizowany pod kątem komunikacji systemowej ATAK, redukuje nadmiarowe transmisje. - Urządzenie, które nadaje tylko wtedy, gdy jest to konieczne w celu zachowania ukrycia lub oszczędzania energii. - Nadaje regularnie lokalizację jako wiadomości do głównego kanału, aby pomóc w odzyskaniu urządzenia. - Umożliwia automatyczne transmisje TAK PLI i zmniejsza liczbę nadmiarowych transmisji. - Węzeł infrastruktury, który zawsze powtarza pakiety raz, ale tylko po wszystkich innych trybach, zapewniając dodatkowe pokrycie lokalnych klastrów. Widoczne na liście węzłów. - Przekazuje ponownie każdy odebrany pakiet, niezależnie od tego, czy został wysłany na nasz prywatny kanał, czy z innej sieci Mesh o tych samych parametrach radia. - To samo zachowanie co ALL, ale pomija dekodowanie pakietów i po prostu je retransmituje. Dostępne tylko w roli REPEATER. Ustawienie tego w innych rolach spowoduje zachowanie jak ALL. - Ignoruje odebrane pakiety z obcych sieci Mesh, które są otwarte lub których nie można odszyfrować. Retransmituje wiadomość tylko na lokalnych kanałach primary / secondary. - Ignoruje odebrane pakiety z obcych sieci, podobnie jak LOCAL_ONLY, ale idzie o krok dalej, ignorując również pakiety z węzłów, które nie znajdują się jeszcze na liście znanych węzłów. - Dozwolone wyłącznie dla ról SENSOR, TRACKER i TAK_TRACKER. Spowoduje to zablokowanie wszystkich retransmisji, podobnie jak rola CLIENT_MUTE. - Ignoruje niestandardowe pakiety (non-standard portnums) takie jak: TAK, RangeTest, PaxCounter, itp. Przekazuje dalej jedynie standardowe pakiety (standard portnums): NodeInfo, Text, Position, Telemetry oraz Routing. + Client + Urządzenie samodzielne lub sparowane z aplikacją. + Client Mute + Wyciszenie klienta - To samo, co klient, z wyjątkiem pakietów, które nie przeskakują przez ten węzeł, nie przyczynia się do routingu pakietów dla siatki. + Router + Węzeł infrastruktury do rozszerzenia zasięgu sieci poprzez przekazywanie pakietów. Widoczny na liście węzłów. + Router Client + Połączenie zarówno trybu ROUTER, jak i CLIENT. Nie dla urządzeń przenośnych. + Repeater + Węzeł infrastruktury do rozszerzenia zasięgu sieci poprzez przekazywanie pakietów z minimalnym narzutem. Niewidoczny na liście węzłów. + Tracker + Tracker - Do użytku z urządzeniami przeznaczonymi jako śledzenie GPS. Pakiety pozycyjne wysyłane z tego urządzenia będą miały wyższy priorytet, z nadawaniem pozycji co dwie minuty. Inteligentna transmisja pozycji będzie domyślnie wyłączona. + Sensor + Nadaje priorytetowo pakiety telemetryczne. + TAK + Zoptymalizowany pod kątem komunikacji systemowej ATAK, redukuje nadmiarowe transmisje. + Client Hidden + Used for nodes that \"only speak when spoken to\" Turns all of the routine broadcasts but allows for ad-hoc communication. Still rebroadcasts, but with local only rebroadcast mode (known meshes only). Can be used for private operation or to dramatically reduce airtime / power consumption. + Lost and Found + Nadaje regularnie lokalizację jako wiadomości do głównego kanału, aby pomóc w odzyskaniu urządzenia. + TAK Tracker + Umożliwia automatyczne transmisje TAK PLI i zmniejsza liczbę nadmiarowych transmisji. + Router Late + Węzeł infrastruktury, który zawsze powtarza pakiety raz, ale tylko po wszystkich innych trybach, zapewniając dodatkowe pokrycie lokalnych klastrów. Widoczne na liście węzłów. + Wszystkie + Przekazuje ponownie każdy odebrany pakiet, niezależnie od tego, czy został wysłany na nasz prywatny kanał, czy z innej sieci Mesh o tych samych parametrach radia. + All Skip Decoding + To samo zachowanie co ALL, ale pomija dekodowanie pakietów i po prostu je retransmituje. Dostępne tylko w roli REPEATER. Ustawienie tego w innych rolach spowoduje zachowanie jak ALL. + Local Only + Ignoruje odebrane pakiety z obcych sieci Mesh, które są otwarte lub których nie można odszyfrować. Retransmituje wiadomość tylko na lokalnych kanałach primary / secondary. + Known Only + Ignoruje odebrane pakiety z obcych sieci, podobnie jak LOCAL_ONLY, ale idzie o krok dalej, ignorując również pakiety z węzłów, które nie znajdują się jeszcze na liście znanych węzłów. + Brak + Dozwolone wyłącznie dla ról SENSOR, TRACKER i TAK_TRACKER. Spowoduje to zablokowanie wszystkich retransmisji, podobnie jak rola CLIENT_MUTE. + Core Portnums Only + Ignoruje niestandardowe pakiety (non-standard portnums) takie jak: TAK, RangeTest, PaxCounter, itp. Przekazuje dalej jedynie standardowe pakiety (standard portnums): NodeInfo, Text, Position, Telemetry oraz Routing. Traktuj podwójne dotknięcie na obsługiwanych akcelerometrach jako naciśnięcie przycisku użytkownika. - Wyłącza trzykrotne naciśnięcie przycisku użytkownika, aby włączyć lub wyłączyć GPS. - Kontroluje miganie LED na urządzeniu. Dla większości urządzeń będzie to sterować jednym z maksymalnie 4 diod LED, ładowarka i diody GPS nie są sterowane. + Send a position on the primary channel when the user button is triple clicked. + Kontroluje miganie LED na urządzeniu. Dla większości urządzeń będzie to sterować jednym z maksymalnie 4 diod LED, ładowarka i diody GPS nie są sterowane. + Time zone for dates on the device screen and log. Czy oprócz wysyłania do MQTT i PhoneAPI, NeighborInfo powinny być przesłane przez LoRa? Niedostępny na kanale z domyślnym kluczem i nazwą. - Klucz publiczny + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Nazwa Kanału Kod QR ikona aplikacji @@ -318,7 +380,8 @@ Niski poziom baterii: %s Powiadomienia o niskim poziomie baterii (ulubione węzły) Ciśnienie barometryczne - Mesh na UDP włączony + Włączony + UDP Broadcast Ustawienia UDP Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Pokaż moją pozycję @@ -396,27 +459,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Konfiguracja urządzenia - Rola - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Konfiguracja wyświetlacza - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Urządzenie + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Wyświetlacz + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Orientacja kompasu Konfiguracja Zewnętrznego Powiadomienia External notification enabled @@ -437,25 +500,27 @@ Nag timeout (seconds) Dzwonek Użyj I2S jako buzzer - Konfiguracja LoRa - Use modem preset - Modem Preset + LoRa + Opcje + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Limit skoków - TX enabled - TX power (dBm) - Frequency slot + Region + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT Konfiguracja MQTT MQTT enabled Address @@ -472,10 +537,13 @@ Neighbor Info enabled Częstotliwość aktualizacji (w sekundach) Nadaj przez LoRa - Konfiguracja sieci + Sieć + WiFi Options + Włączony WiFi włączone SSID PSK + Ethernet Options Ethernet włączony Serwer NTP Serwer rsyslog @@ -487,7 +555,7 @@ Paxcounter enabled Próg WiFi RSSI (domyślnie: -80) BLE RSSI threshold (defaults to -80) - Konfiguracja pozycjonowania + Pozycjonowanie Position broadcast interval (seconds) Sprytne pozycjonowanie Smart broadcast minimum distance (meters) @@ -505,7 +573,9 @@ Flagi położenia Konfiguracja zarządzania energią Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -520,7 +590,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Konfiguracja zabezpieczeń + Bezpieczeństwo + Direct Message Key + Admin Keys Klucz publiczny Klucz prywatny Admin Key @@ -792,4 +864,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-pt-rBR/strings.xml b/app/src/main/res/values-pt-rBR/strings.xml index acb219500..ba39faf0d 100644 --- a/app/src/main/res/values-pt-rBR/strings.xml +++ b/app/src/main/res/values-pt-rBR/strings.xml @@ -53,29 +53,91 @@ Chave Pública Desconhecida Chave de sessão incorreta Chave Publica não autorizada - Aplicativo conectado ou é um dispositivo autônomo de mensagem. - Dispositivo que não retransmite pacotes de outros dispositivos. - Nó de infraestrutura para estender a cobertura da rede repassando mensagens. Visível na lista de nós. - Combinação de ROUTER e CLIENT. Incompatível com dispositivos móveis. - Nó de infraestrutura para estender a cobertura da rede repassando mensagens com sobrecarga mínima. Não visível na lista de nós. - Transmita pacotes de posição do GPS como prioridade. - Transmita pacotes de telemetria como prioridade. - Otimizado para a comunicação do sistema ATAK, reduz as transmissões de rotina. - Dispositivo que só transmite conforme necessário para economizar energia ou se manter em segredo. - Transmite o local como mensagem para o canal padrão regularmente para ajudar na recuperação do dispositivo. - Habilita transmissões automáticas TAK PLI e reduz as transmissões rotineiras. - Nó de infraestrutura que sempre retransmitirá pacotes somente uma vez depois de todos os outros modos, garantindo cobertura adicional para clusters locais. Visível na lista de nós. - Retransmita qualquer mensagem observada, se estivesse em nosso canal privado ou de outra malha com os mesmos parâmetros de lora. - O mesmo que o comportamento de TODOS, mas ignora a decodificação de pacotes e simplesmente os retransmite. Apenas disponível no papel de Repetidor. Configurar isso em qualquer outra função resultará em comportamento como TODOS. - Ignora mensagens observadas de malhas estrangeiras que estão abertas ou aquelas que não pode descriptografar. Apenas retransmite mensagem nos nós de canais primários / secundários. - Ignora mensagens observadas de malhas estrangeiras como APENAS LOCAL, e vai ainda mais longe ignorando também mensagens de nós que não estão na lista conhecida do nó. - Somente permitido para os papéis SENSOR, TRACKER e TAK_TRACKER, isso irá inibir todas as retransmissões, como do papel CLIENT_MUTE. - Ignora pacotes de portnums não padrão como: TAK, RangeTest, PaxCounter, etc. Apenas retransmite pacotes com portnums padrão: NodeInfo, Text, Position, Telemetry, and Routing. + Client + Aplicativo conectado ou é um dispositivo autônomo de mensagem. + Client Mute + Dispositivo que não retransmite pacotes de outros dispositivos. + Router + Nó de infraestrutura para estender a cobertura da rede repassando mensagens. Visível na lista de nós. + Router Client + Combinação de ROUTER e CLIENT. Incompatível com dispositivos móveis. + Repeater + Nó de infraestrutura para estender a cobertura da rede repassando mensagens com sobrecarga mínima. Não visível na lista de nós. + Tracker + Transmita pacotes de posição do GPS como prioridade. + Sensor + Transmita pacotes de telemetria como prioridade. + TAK + Otimizado para a comunicação do sistema ATAK, reduz as transmissões de rotina. + Client Hidden + Dispositivo que só transmite conforme necessário para economizar energia ou se manter em segredo. + Lost and Found + Transmite o local como mensagem para o canal padrão regularmente para ajudar na recuperação do dispositivo. + TAK Tracker + Habilita transmissões automáticas TAK PLI e reduz as transmissões rotineiras. + Router Late + Nó de infraestrutura que sempre retransmitirá pacotes somente uma vez depois de todos os outros modos, garantindo cobertura adicional para clusters locais. Visível na lista de nós. + All + Retransmita qualquer mensagem observada, se estivesse em nosso canal privado ou de outra malha com os mesmos parâmetros de lora. + All Skip Decoding + O mesmo que o comportamento de TODOS, mas ignora a decodificação de pacotes e simplesmente os retransmite. Apenas disponível no papel de Repetidor. Configurar isso em qualquer outra função resultará em comportamento como TODOS. + Local Only + Ignora mensagens observadas de malhas estrangeiras que estão abertas ou aquelas que não pode descriptografar. Apenas retransmite mensagem nos nós de canais primários / secundários. + Known Only + Ignora mensagens observadas de malhas estrangeiras como APENAS LOCAL, e vai ainda mais longe ignorando também mensagens de nós que não estão na lista conhecida do nó. + Nenhum + Somente permitido para os papéis SENSOR, TRACKER e TAK_TRACKER, isso irá inibir todas as retransmissões, como do papel CLIENT_MUTE. + Core Portnums Only + Ignora pacotes de portnums não padrão como: TAK, RangeTest, PaxCounter, etc. Apenas retransmite pacotes com portnums padrão: NodeInfo, Text, Position, Telemetry, and Routing. Tratar toque duplo nos acelerômetros suportados enquanto um botão pressionado pelo usuário. - Desativa o pressionamento triplo do botão pelo usuário para ativar ou desativar o GPS. - Controla o LED piscando no dispositivo. Para a maioria dos dispositivos, isto controlará um dos até 4 LEDs, os LEDs do carregador e GPS não são controláveis. + Send a position on the primary channel when the user button is triple clicked. + Controla o LED piscando no dispositivo. Para a maioria dos dispositivos, isto controlará um dos até 4 LEDs, os LEDs do carregador e GPS não são controláveis. + Time zone for dates on the device screen and log. Se além de enviá-lo para MQTT e PhoneAPI, nosso NeighborInfo deve ser transmitido por LoRa. Não disponível em um canal com chave e nome padrão. - Chave Publica + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Nome do canal Código QR ícone do aplicativo @@ -314,7 +376,8 @@ Bateria fraca: %s Notificações de bateria fraca (nós favoritos) Pressão Barométrica - Mesh via UDP ativado + Enabled + UDP Broadcast Configuração UDP Última vez: %2$s
Última posição: %3$s
Bateria: %4$s]]> Ativar minha posição @@ -392,27 +455,27 @@ Pin GPIO para monitorar Tipo de gatilho de deteção Usar o modo INPUT_PULLUP - Configuração do Dispositivo - Papel - Definir PIN_BUTTON - Definir PIN_BUZZER - Modo de retransmissão - Intervalo de transmissão de NodeInfo (segundos) - Toque duplo para pressionar botão - Desativar click triplo - Fuso horário POSIX - Desativar pulsação do LED - Configuração da Tela - Tempo limite da tela (segundos) - Formato das coordenadas GPS - Carrossel de tela automático (segundos) + Dispositivo + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Tela + Screen on for + Carousel interval Norte da bússola no topo Inverter tela Unidades de exibição - Ignorar deteção automática do OLED + OLED type Modo da tela - Direção em destaque - Ligar a tela ao tocar ou mover + Always point north + Bold Heading + Wake on tap or motion Orientação da bússola Configuração de Notificação Externa Notificação Externa habilitada @@ -433,25 +496,27 @@ Tempo limite a incomodar (segundos) Toque Usar I2S como buzzer - Configuração do LoRa - Usar predefinição do modem - Predefinição do modem + LoRa + Options + Advanced + Use Preset + Presets Largura da banda - Fator de difusão - Taxa de codificação + Spread Factor + Coding Rate Deslocamento da frequência (MHz) - Região (plano de frequências) - Limite de saltos - TX ativado - Potência TX (dBm) - Intervalo de frequência + Região + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Ignorar ciclo de trabalho Ignorar entrada - RX com ganho reforçado SX126X - Substituir a frequência (MHz) + RX Boosted Gain + Frequency Override Ventilador do PA desativado Ignorar MQTT - OK para MQTT + Ok to MQTT Configuração MQTT MQTT ativado Endereço @@ -468,10 +533,13 @@ Informações do Vizinho ativado Intervalo de atualização (segundos) Enviar por LoRa - Configuração de Rede + Rede + WiFi Options + Enabled Wi-Fi ativado SSID PSK + Ethernet Options Ethernet ativado Servidor NTP servidor rsyslog @@ -483,7 +551,7 @@ Contador de Pessoas ativado Limite de RSSI do Wi-Fi (o padrão é -80) Limite de RSSI BLE (o padrão é -80) - Configuração da Posição + Posição Intervalo de transmissão de posição (segundos) Posição inteligente ativada Distância mínima de transmissão inteligente (metros) @@ -501,7 +569,9 @@ Opções de posição Configuração de Energia Ativar modo de economia de energia + Shutdown on power loss Espera para desligar ao passar para bateria (segundos) + ADC multiplier override Alterar proporção do multiplicador ADC Tempo de espera por Bluetooth (segundos) Duração do sono profundo (segundos) @@ -516,7 +586,9 @@ Hardware Remoto ativado Permitir acesso indefinido ao pin Pins disponíveis - Configuração de Segurança + Segurança + Direct Message Key + Admin Keys Chave Publica Chave Privada Chave do Administrador @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-pt-rPT/strings.xml b/app/src/main/res/values-pt-rPT/strings.xml index 2c182ade6..696ae63cd 100644 --- a/app/src/main/res/values-pt-rPT/strings.xml +++ b/app/src/main/res/values-pt-rPT/strings.xml @@ -53,29 +53,91 @@ Public Key desconhecida Chave de sessão inválida Public Key não autorizada - Ligado por app, ou dispositivo autónomo de mensagens. - Dispositivo que não encaminha mensagens de outros dispositivos. - Node de infraestrutura que retransmite mensagens para estender a cobertura da rede (Router). Visível na lista de nodes. - Combinação de ROUTER e CLIENT. Não indicado para dispositivos móveis. - Node de infraestrutura para estender a cobertura da rede retransmitindo mensagens com overhead mínimo. Não visível na lista de nodes. - Transmite dados de posições GPS como prioridade. - Transmite dados de telemetria como prioridade. - Otimizado para comunicação do sistema ATAK, reduz as transmissões de rotina. - Dispositivo que só transmite quando necessário para economizar energia ou anonimidade. - Transmite regularmente a localização como uma mensagem para o canal default, para auxiliar na recuperação do dispositivo. - Permite transmissões automáticas do TAK PLI e reduz as transmissões de rotina. - Node de infraestrutura que vai sempre retransmitir dados uma vez, mas apenas após todos os outros modos, garantindo cobertura adicional para grupos locais. Visível na lista de nós. - Se estiver no nosso canal privado ou de outra rede com os mesmos parâmetros LoRa, retransmite qualquer mensagem observada. - Modo indêntico ao ALL, mas apenas retransmite os dados sem os descodificar. Apenas disponível em modo Repeater. Esta opção em qualquer outro modo resulta em comportamento igual ao ALL. - Ignora mensagens observadas de malhas estrangeiras que estão abertas ou aquelas que não pode desencriptar. Apenas retransmite mensagem nos canais primários / secundários locais. - Ignora mensagens observadas de malhas estrangeiras, como APENAS LOCAL, mas leva mais longe ignorando também mensagens de nodes que não já estão na lista conhecida do node. - Permitido apenas para SENSOR, TRACKER e TAK_TRACKER, isto irá desativar todas as retransmissões, como o papel CLIENT_MUTE. - Ignora pacotes de portas não padrão, tais como: TAK, RangeTest, PaxCounter, etc. Apenas retransmite pacotes com portas padrão: NodeInfo, Texto, Posição, Telemetria e Roteamento. + Client + Ligado por app, ou dispositivo autónomo de mensagens. + Client Mute + Dispositivo que não encaminha mensagens de outros dispositivos. + Router + Node de infraestrutura que retransmite mensagens para estender a cobertura da rede (Router). Visível na lista de nodes. + Router Client + Combinação de ROUTER e CLIENT. Não indicado para dispositivos móveis. + Repeater + Node de infraestrutura para estender a cobertura da rede retransmitindo mensagens com overhead mínimo. Não visível na lista de nodes. + Tracker + Transmite dados de posições GPS como prioridade. + Sensor + Transmite dados de telemetria como prioridade. + TAK + Otimizado para comunicação do sistema ATAK, reduz as transmissões de rotina. + Client Hidden + Dispositivo que só transmite quando necessário para economizar energia ou anonimidade. + Lost and Found + Transmite regularmente a localização como uma mensagem para o canal default, para auxiliar na recuperação do dispositivo. + TAK Tracker + Permite transmissões automáticas do TAK PLI e reduz as transmissões de rotina. + Router Late + Node de infraestrutura que vai sempre retransmitir dados uma vez, mas apenas após todos os outros modos, garantindo cobertura adicional para grupos locais. Visível na lista de nós. + Tudo + Se estiver no nosso canal privado ou de outra rede com os mesmos parâmetros LoRa, retransmite qualquer mensagem observada. + All Skip Decoding + Modo indêntico ao ALL, mas apenas retransmite os dados sem os descodificar. Apenas disponível em modo Repeater. Esta opção em qualquer outro modo resulta em comportamento igual ao ALL. + Local Only + Ignora mensagens observadas de malhas estrangeiras que estão abertas ou aquelas que não pode desencriptar. Apenas retransmite mensagem nos canais primários / secundários locais. + Known Only + Ignora mensagens observadas de malhas estrangeiras, como APENAS LOCAL, mas leva mais longe ignorando também mensagens de nodes que não já estão na lista conhecida do node. + Nenhum + Permitido apenas para SENSOR, TRACKER e TAK_TRACKER, isto irá desativar todas as retransmissões, como o papel CLIENT_MUTE. + Core Portnums Only + Ignora pacotes de portas não padrão, tais como: TAK, RangeTest, PaxCounter, etc. Apenas retransmite pacotes com portas padrão: NodeInfo, Texto, Posição, Telemetria e Roteamento. Tratar toques duplos em acelerómetros suportados como pressionar um botão. - Desativa o pressionar triplo do botão para ativar ou desativar o GPS. - Controla o piscar do LED no dispositivo. Para a maioria dos dispositivos, isto controla um dos até 4 LEDs, os do carregador e GPS não são controláveis. + Send a position on the primary channel when the user button is triple clicked. + Controla o piscar do LED no dispositivo. Para a maioria dos dispositivos, isto controla um dos até 4 LEDs, os do carregador e GPS não são controláveis. + Time zone for dates on the device screen and log. Além de enviar para MQTT e PhoneAPI, a vizinhança deve ser transmitida através da LoRa. Não disponível em canais com chave e nome padrão. - Chave pública + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Depuração Nome do Canal Código QR icone da aplicação @@ -314,7 +376,8 @@ Bateria fraca: %s Notificações de bateria fraca (nodes favoritos) Pressão atmosférica - Ativar malha via UDP + Enabled + UDP Broadcast Configuração UDP Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -392,27 +455,27 @@ Pin GPIO para monitorizar Tipo de gatilho de deteção Usar o modo INPUT_PULLUP - Configuração do Dispositivo - Papel - Definir PIN_BUTTON - Definir PIN_BUZZER - Modo de retransmissão - Intervalo de difusão nodeInfo (segundos) - Toque duplo para pressionar botão - Desativar click triplo - Fuso horário POSIX - Desativar pulsação do LED - Configuração do Ecrã - Tempo limite do ecrã (segundos) - Formato das coordenadas GPS - Carrossel de ecrã automático (segundos) + Dispositivo + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Ecrã + Screen on for + Carousel interval Norte da bússola no topo Inverter ecrã Unidade de visualização - Ignorar deteção automática do OLED + OLED type Modo de visualização - Direção em destaque - Ligar o ecrã ao tocar ou mover + Always point north + Bold Heading + Wake on tap or motion Orientação da bússola Configuração de Notificação Externa Ativar notificações externas @@ -433,25 +496,27 @@ Tempo limite a incomodar (segundos) Toque Usar I2S como buzzer - Configuração de LoRa - Usar predefinição do modem - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Largura de banda - Fator de difusão - Índice de codificação + Spread Factor + Coding Rate Compensação de frequência (MHz) - Região (plano de frequências) - Limite de saltos - Ativar TX - Potência TX (dBm) - Intervalo de frequência + Região + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Ignorar ciclo de trabalho Ignorar entrada - RX com ganho reforçado SX126X - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignorar MQTT - Disponibilizar no MQTT + Ok to MQTT Configuração MQTT MQTT ativo Endereço @@ -468,10 +533,13 @@ Enviar informações de vizinhos Intervalo de atualização (segundos) Enviar por LoRa - Configuração de Rede + Rede + WiFi Options + Enabled WiFi ligado SSID PSK + Ethernet Options Ethernet ativada Servidor NTP servidor rsyslog @@ -483,7 +551,7 @@ Ativar contador de pessoas Limite de RSSI do Wi-Fi (o padrão é -80) Limite de RSSI BLE (o padrão é -80) - Configuração da posição + Posição Intervalo de difusão da posição (segundos) Ativar posição inteligente Distância mínima de difusão inteligente (metros) @@ -501,7 +569,9 @@ Opções de posição Configuração de Energia Ativar modo de poupança de energia + Shutdown on power loss Espera para desligar ao passar para bateria (segundos) + ADC multiplier override Alterar rácio do multiplicador ADC Tempo de espera por Bluetooth (segundos) Duração do sono profundo (segundos) @@ -516,7 +586,9 @@ Hardware Remoto ativado Permitir acesso indefinido ao pin Pins disponíveis - Configuração de Segurança + Segurança + Direct Message Key + Admin Keys Chave pública Chave privada Chave do Administrador @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-ro-rRO/strings.xml b/app/src/main/res/values-ro-rRO/strings.xml index 54e68aa0e..f5013e725 100644 --- a/app/src/main/res/values-ro-rRO/strings.xml +++ b/app/src/main/res/values-ro-rRO/strings.xml @@ -53,29 +53,91 @@ Unknown Public Key Bad session key Cheie publică neautorizată - App connected or standalone messaging device. - Device that does not forward packets from other devices. - Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. - Combination of both ROUTER and CLIENT. Not for mobile devices. - Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. - Broadcasts GPS position packets as priority. - Transmite pachete telemetrice ca prioritate. - Optimized for ATAK system communication, reduces routine broadcasts. - Device that only broadcasts as needed for stealth or power savings. - Broadcasts location as message to default channel regularly for to assist with device recovery. - Enables automatic TAK PLI broadcasts and reduces routine broadcasts. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. - Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. - Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + App connected or standalone messaging device. + Client Mute + Device that does not forward packets from other devices. + Router + Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. + Router Client + Combination of both ROUTER and CLIENT. Not for mobile devices. + Repeater + Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. + Tracker + Broadcasts GPS position packets as priority. + Sensor + Transmite pachete telemetrice ca prioritate. + TAK + Optimized for ATAK system communication, reduces routine broadcasts. + Client Hidden + Device that only broadcasts as needed for stealth or power savings. + Lost and Found + Broadcasts location as message to default channel regularly for to assist with device recovery. + TAK Tracker + Enables automatic TAK PLI broadcasts and reduces routine broadcasts. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. + All Skip Decoding + Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. + None + Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. + Core Portnums Only + Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Numele canalului Cod QR Iconița aplicației @@ -316,7 +378,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -394,27 +457,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -435,25 +498,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Regiune + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -470,10 +535,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -485,7 +553,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -503,7 +571,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -518,7 +588,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Public Key Private Key Admin Key @@ -790,4 +862,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-ru-rRU/strings.xml b/app/src/main/res/values-ru-rRU/strings.xml index 59ecd5483..b4459b5c7 100644 --- a/app/src/main/res/values-ru-rRU/strings.xml +++ b/app/src/main/res/values-ru-rRU/strings.xml @@ -53,29 +53,91 @@ Неизвестный публичный ключ Неверный ключ сессии Публичный ключ не авторизован - Приложение подключено или автономное устройство обмена сообщениями. - Устройство, которое не пересылает пакеты с других устройств. - Инфраструктурный узел для расширения охвата сети путем передачи сообщений. Видим в списке узлов. - Комбинация ROUTER и CLIENT. Не для мобильных устройств. - Инфраструктурный узел для расширения покрытия сети путем передачи сообщений с минимальными накладными расходами. Не виден в списке узлов. - Транслирует пакеты позиций GPS в качестве приоритета. - Транслирует пакеты телеметрии в приоритетном порядке. - Оптимизировано для связи с системой ATAK, сокращает текущие передачи. - Устройство, которое передает сигнал только при необходимости для скрытности или экономии энергии. - Регулярно передает местоположение в виде сообщения на канал по умолчанию для помощи в восстановлении устройства. - Включает автоматические трансляции TAK PLI и сокращает рутинные трансляции. - Инфраструктурный узел, который всегда ретранслирует пакеты один раз, но только после всех остальных режимов, обеспечивая дополнительное покрытие для локальных кластеров. Видим в списке. - Ретранслировать замеченное сообщение, если оно было на нашем частном канале или из другой сетки с теми же параметрами lora. - Так же, как и все, но пропускает декодирование пакетов и просто ретранслирует их. Доступно только в роли репитера. Установка этой функции для любых других ролей приведет к поведению режима ВСЁ. - Игнорирует замеченные сообщения от чужих сетей, которые открыты или не может расшифровать. Ретранслировать сообщение только на узлах локальных первичных / вторичных каналов. - Игнорируемые сообщения из других сетей, таких как ТОЛЬКО ДЛЯ СВОИХ, но так же, и игнорирует сообщения от узлов, которые еще не включены в известный список узлов. - Разрешено только для ролей SENSOR, TRACKER и TAK_TRACKER, это запретит все ретрансляции, не похожие на роль CLIENT_MUTE. - Игнорирует пакеты из нестандартных портов, таких как: TAK, RangeTest, PaxCounter и т. д. Только ретранслирует пакеты со стандартными номерами портов: NodeInfo, Text, Position, Telemetry, Routing. + Client + Приложение подключено или автономное устройство обмена сообщениями. + Client Mute + Устройство, которое не пересылает пакеты с других устройств. + Router + Инфраструктурный узел для расширения охвата сети путем передачи сообщений. Видим в списке узлов. + Router Client + Сочетание ROUTER и CLIENT. Не для переносных устройств. + Repeater + Инфраструктурный узел для расширения покрытия сети путем передачи сообщений с минимальными накладными расходами. Не виден в списке узлов. + Tracker + Транслирует пакеты местоположения GPS в приоритетном порядке. + Sensor + Транслирует пакеты телеметрии в приоритетном порядке. + TAK + Оптимизировано для связи с системой ATAK, сокращает текущие передачи. + Client Hidden + Устройство, которое передает сигнал только при необходимости для скрытности или экономии энергии. + Lost and Found + Регулярно передает местоположение в виде сообщения на канал по умолчанию для помощи в восстановлении устройства. + TAK Tracker + Включает автоматические трансляции TAK PLI и сокращает рутинные трансляции. + Router Late + Инфраструктурный узел, который всегда ретранслирует пакеты один раз, но только после всех остальных режимов, обеспечивая дополнительное покрытие для локальных кластеров. Видим в списке. + Всё + Ретранслировать замеченное сообщение, если оно было на нашем частном канале или из другой сетки с теми же параметрами lora. + All Skip Decoding + Так же, как и все, но пропускает декодирование пакетов и просто ретранслирует их. Доступно только в роли репитера. Установка этой функции для любых других ролей приведет к поведению режима ВСЁ. + Local Only + Игнорирует обнаруженные сообщения из чужих mesh-сетей, которые открыты или не могут быть расшифрованы. Ретранслирует сообщение только на локальных основных / дополнительных каналах узлов. + Known Only + Игнорируемые сообщения из других сетей, таких как ТОЛЬКО ДЛЯ СВОИХ, но так же, и игнорирует сообщения от узлов, которые еще не включены в известный список узлов. + Отсутствует + Разрешено только для ролей SENSOR, TRACKER и TAK_TRACKER, это запретит все ретрансляции, не похожие на роль CLIENT_MUTE. + Core Portnums Only + Игнорирует пакеты из нестандартных портов, таких как: TAK, RangeTest, PaxCounter и т. д. Только ретранслирует пакеты со стандартными номерами портов: NodeInfo, Text, Position, Telemetry, Routing. Рассматривать двойное нажатие на поддерживаемых акселерометрах как нажатие пользовательской кнопки. - Отключает тройное нажатие кнопки пользователя, чтобы включить или отключить GPS. - Управляет мигающим светодиодом на устройстве. Для большинства устройств это будет управлять одним из до 4 светодиодов, зарядное устройство и GPS светодиоды не управляются. + Send a position on the primary channel when the user button is triple clicked. + Управляет мигающим светодиодом на устройстве. Для большинства устройств это будет управлять одним из до 4 светодиодов, зарядное устройство и GPS светодиоды не управляются. + Time zone for dates on the device screen and log. В дополнение к отправке на MQTT и PhoneAPI, наши NeighborInfo должны быть переданы через LoRa. Недоступно на канале с ключом и именем по умолчанию. - Публичный ключ + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Имя канала QR код значок приложения @@ -318,7 +380,8 @@ Низкий заряд батареи: %s Уведомления о низком заряде батареи (Фаворитные узлы) Давление на барометре - Сеть через UDP включена + Enabled + UDP Broadcast UDP Config Последний приём: %2$s
Последнее местоположение: %3$s
Батарея: %4$s]]> Переключить мою позицию @@ -396,27 +459,27 @@ GPIO контакт для мониторинга Тип триггера обнаружения Использовать режим INPUT_PULLUP - Настройки устройства - Роль - Изменить PIN_BUTTON - Переопределить PIN_BUZER - Режим ретрансляции - Интервал трансляции узла (в секундах) - Двойное нажатие по нажатию кнопки - Отключить тройное нажатие - POSIX Timezone - Отключить светодиод - Отображать конфигурацию - Тайм-аут экрана (в секундах) - Формат координат GPS - Автоматическая карусель экрана (в секундах) + Устройство + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Дисплей + Screen on for + Carousel interval Север компаса в верх Повернуть экран Единицы отображения - Переопределить автоопределение OLED + OLED type Режим экрана - Направление жирным текстом - Включать экран при касании или движении + Always point north + Bold Heading + Wake on tap or motion Направление компаса Настройка внешнего уведомления Внешние уведомления включены @@ -437,25 +500,27 @@ Таймаут Nag (в секундах) Рингтон Использовать I2S как буззер - Настройка LoRa - Использовать шаблон модема - Режим работы модема + LoRa + Options + Advanced + Use Preset + Presets Ширина канала - Коэффициент распространения - Частота кодирования + Spread Factor + Coding Rate Частота смещения (MHz) - Регион (частотный план) - Ограничение прыжков - TX включён - Мощность TX (dBm) - Частотный слот + Регион / Страна + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Переопределить цикл работы Игнорировать входящие - Повышенная усиление SX126X RX - Переопределить частоту (MHz) + RX Boosted Gain + Frequency Override PA вентилятор выключен Игнорировать MQTT - ОК в MQTT + Ok to MQTT Настройка MQTT MQTT включен Адрес @@ -472,10 +537,13 @@ Информация о соседях включена Интервал обновления (в секундах) Передать через LoRa - Настройка сети + Сеть + WiFi Options + Enabled WiFi включен Название сети Пароль + Ethernet Options Ethernet включен NTP сервер Сервер rsyslog @@ -487,7 +555,7 @@ Paxcounter включен Порог WiFi RSSI (по умолчанию -80) BLE RSSI порог (по умолчанию -80) - Настройки позиции + Местоположение Интервал трансляции позиции (секунды) Умная позиция включена Умная трансляция минимальное расстояние (метры) @@ -505,7 +573,9 @@ Флаги позиции Настройка питания Включить энергосбережение + Shutdown on power loss Задержка выключения в режиме батареи (в секундах) + ADC multiplier override Коэффициент переопределения ADC Ожидание Bluetooth (в секундах) Длительность супер глубокого сна (в секундах) @@ -520,7 +590,9 @@ Удаленное оборудование включено Разрешить неопределённый контакт Доступные контакты - Настройки безопасности + Безопасность + Direct Message Key + Admin Keys Публичный ключ Закрытый ключ Ключ админа @@ -789,4 +861,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-sk-rSK/strings.xml b/app/src/main/res/values-sk-rSK/strings.xml index 50cb7c6c2..0c795883f 100644 --- a/app/src/main/res/values-sk-rSK/strings.xml +++ b/app/src/main/res/values-sk-rSK/strings.xml @@ -53,29 +53,91 @@ Neznámy verejný kľúč Zlý kľúč relácie Verejný kľúč neautorizovaný - Pripojená aplikácia, alebo samostatné zariadenie na odosielanie správ. - Zariadenie, ktoré nepreposiela pakety z ďalších zariadení. - Uzol infraštruktúry na rozšírenie pokrytia siete prenosom správ. Viditeľný v zozname uzlov. - Kombinácia ROUTER a CLIENT. Nie pre mobilné zariadenia. - Uzol infraštruktúry na rozšírenie pokrytia siete prenosom správ s minimálnou réžiou. Nezobrazuje sa v zozname uzlov. - Prioritne vysiela pakety polohy GPS. - Prioritne vysiela telemetrické pakety. - Optimalizované pre systémovú komunikáciu ATAK, znižuje rutinné vysielanie. - Zariadenie, ktoré vysiela len podľa potreby pre utajenie, alebo úsporu energie. - Pravidelne vysiela polohu ako správu na predvolený kanál, aby pomohol pri obnove zariadenia. - Umožňuje automatické vysielanie TAK PLI a znižuje rutinné vysielanie. - Uzol infraštruktúry, ktorý vždy preposiela pakety raz, ale až po všetkých ostatných režimoch, čím zabezpečuje dodatočné pokrytie pre miestne zväzky. Viditeľný v zozname uzlov. - Preposiela akúkoľvek pozorovanú správu, ak bola na našom súkromnom kanáli alebo z inej siete s rovnakými parametrami lora. - Rovnaké ako správanie ako ALL, ale preskočí dekódovanie paketov a jednoducho ich prepošle. Dostupné iba v úlohe Opakovača. Nastavenie tejto možnosti na akékoľvek iné roly bude mať za následok správania sa ako ALL. - Ignoruje pozorované správy z cudzích sietí, ktoré sú otvorené alebo tie, ktoré nedokáže dešifrovať. Opätovne vysiela správu iba na lokálnych primárnych / sekundárnych kanáloch uzlov. - Ignoruje pozorované správy z cudzích sietí, ako napríklad LOCAL ONLY, ale ide o krok ďalej tým, že ignoruje aj správy z uzlov, ktoré ešte nie sú v známom zozname uzla. - Povolené len pre role SENSOR, TRACKER a TAK_TRACKER, zamedzí to všetkým opätovným vysielaniam, na rozdiel od roly CLIENT_MUTE. - Ignoruje pakety z neštandardných portov, ako sú: TAK, RangeTest, PaxCounter atď. Opätovne vysiela iba pakety so štandardnými portami: NodeInfo, Text, Position, Telemetry a Routing. + Client + Pripojená aplikácia, alebo samostatné zariadenie na odosielanie správ. + Client Mute + Zariadenie, ktoré nepreposiela pakety z ďalších zariadení. + Router + Uzol infraštruktúry na rozšírenie pokrytia siete prenosom správ. Viditeľný v zozname uzlov. + Router Client + Kombinácia ROUTER a CLIENT. Nie pre mobilné zariadenia. + Repeater + Uzol infraštruktúry na rozšírenie pokrytia siete prenosom správ s minimálnou réžiou. Nezobrazuje sa v zozname uzlov. + Tracker + Prioritne vysiela pakety polohy GPS. + Sensor + Prioritne vysiela telemetrické pakety. + TAK + Optimalizované pre systémovú komunikáciu ATAK, znižuje rutinné vysielanie. + Client Hidden + Zariadenie, ktoré vysiela len podľa potreby pre utajenie, alebo úsporu energie. + Lost and Found + Pravidelne vysiela polohu ako správu na predvolený kanál, aby pomohol pri obnove zariadenia. + TAK Tracker + Umožňuje automatické vysielanie TAK PLI a znižuje rutinné vysielanie. + Router Late + Uzol infraštruktúry, ktorý vždy preposiela pakety raz, ale až po všetkých ostatných režimoch, čím zabezpečuje dodatočné pokrytie pre miestne zväzky. Viditeľný v zozname uzlov. + All + Preposiela akúkoľvek pozorovanú správu, ak bola na našom súkromnom kanáli alebo z inej siete s rovnakými parametrami lora. + All Skip Decoding + Rovnaké ako správanie ako ALL, ale preskočí dekódovanie paketov a jednoducho ich prepošle. Dostupné iba v úlohe Opakovača. Nastavenie tejto možnosti na akékoľvek iné roly bude mať za následok správania sa ako ALL. + Local Only + Ignoruje pozorované správy z cudzích sietí, ktoré sú otvorené alebo tie, ktoré nedokáže dešifrovať. Opätovne vysiela správu iba na lokálnych primárnych / sekundárnych kanáloch uzlov. + Known Only + Ignoruje pozorované správy z cudzích sietí, ako napríklad LOCAL ONLY, ale ide o krok ďalej tým, že ignoruje aj správy z uzlov, ktoré ešte nie sú v známom zozname uzla. + Žiadny + Povolené len pre role SENSOR, TRACKER a TAK_TRACKER, zamedzí to všetkým opätovným vysielaniam, na rozdiel od roly CLIENT_MUTE. + Core Portnums Only + Ignoruje pakety z neštandardných portov, ako sú: TAK, RangeTest, PaxCounter atď. Opätovne vysiela iba pakety so štandardnými portami: NodeInfo, Text, Position, Telemetry a Routing. Vykoná dvojklepnutie na podporovaných akcelerometroch ako stlačenie užívateľského tlačidla. - Vypne trojité stlačenie užívateľského tlačidla pre zapnutie, alebo vypnutie GPS. - Ovláda blikajúcu LED na zariadení. Pre väčšinu zariadení toto ovláda jednu zo štyroch LED, neovláda LED pre GPS a nabíjanie. + Send a position on the primary channel when the user button is triple clicked. + Ovláda blikajúcu LED na zariadení. Pre väčšinu zariadení toto ovláda jednu zo štyroch LED, neovláda LED pre GPS a nabíjanie. + Time zone for dates on the device screen and log. Okrem odoslania do MQTT a PhoneAPI je prenášanie informácii o susedoch prostredníctvom LoRa. Nedostupné na kanáli s predvoleným kľúčom a názvom. - Verejný kľúč + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Názov kanála QR kód Ikona aplikácie @@ -318,7 +380,8 @@ Slabá batéria: %s Upozornenia o slabej batérii (obľúbene uzle) Barometrický tlak - Sieť prostredníctvom UDP zapnutá + Enabled + UDP Broadcast Konfigurácia UDP Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Zapnúť lokalizáciu @@ -396,27 +459,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Zariadenie + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Obrazovka + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -437,25 +500,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Región + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -472,10 +537,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Sieť + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -487,7 +555,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Pozícia Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -505,7 +573,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -520,7 +590,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Zabezpečenie + Direct Message Key + Admin Keys Verejný kľúč Súkromný kľúč Admin Key @@ -792,4 +864,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-sl-rSI/strings.xml b/app/src/main/res/values-sl-rSI/strings.xml index 0b56b80c0..468e9ad96 100644 --- a/app/src/main/res/values-sl-rSI/strings.xml +++ b/app/src/main/res/values-sl-rSI/strings.xml @@ -53,29 +53,91 @@ Neznan javni ključ Napačen sejni ključ Javni ključ ni pooblaščen - Aplikacija povezana ali samostojna naprava za sporočanje. - Naprava ki ne posreduje paketkov drugih naprav. - Infrastrukturno vozlišče za razširitev pokritosti omrežja s posredovanjem sporočil. Vidno na seznamu vozlišč. - Kombinacija ROUTER in CLIENT. Ni za mobilne naprave. - Infrastrukturno vozlišče za razširitev pokritosti omrežja s posredovanjem sporočil z minimalnimi stroški. Ni vidno na seznamu vozlišč. - Prednostno oddaja paketke GPS položaja. - Prednostno oddaja paketke telemetrije. - Optimizirano za komunikacijo sistema ATAK, zmanjšuje rutinsko oddajanje. - Naprava, ki oddaja samo po potrebi zaradi prikritosti ali varčevanja z energijo. - Redno oddaja lokacijo kot sporočilo privzetemu kanalu za pomoč pri vrnitvi naprave. - Omogoča samodejno oddajanje TAK PLI in zmanjšuje rutinsko oddajanje. - Infrastrukturno vozlišče, ki vedno znova oddaja paketke enkrat, vendar šele po vseh drugih načinih, kar zagotavlja dodatno pokritost za lokalne gruče. Vidno na seznamu vozlišč. - Ponovno oddaja vsako opaženo sporočilo, če je bilo na našem zasebnem kanalu ali iz drugega omrežja z enakimi parametri. - Enako kot vedenje ALL, vendar preskoči dekodiranje paketkov in jih preprosto ponovno odda. Na voljo samo v vlogi Repeater. Če to nastavite za katero koli drugo vlogo, bo to povzročilo vedenje ALL. - Ignorira opažena sporočila tujih odprtih mrež, ali tistih, ki jih ne more dešifrirati. Ponovno oddaja samo sporočila na lokalnih primarnih/sekundarnih kanalih vozlišč. - Ignorira opažena sporočila iz tujih mrež, kot je LOCAL ONLY, vendar gre korak dlje, tako da ignorira tudi sporočila vozlišč, ki še niso na seznamu znanih. - Dovoljeno samo za vloge SENSOR, TRACKER in TAK_TRACKER, prepovedano bo vsakršnje ponovno oddajanje, v nasprotju z vlogo CLIENT_MUTE. - Ignorira nestandardne paketke, kot so: TAK, RangeTest, PaxCounter itd. Ponovno oddaja samo standardne paketke: NodeInfo, Text, Position, Telemetry in Routing. + Client + Aplikacija povezana ali samostojna naprava za sporočanje. + Client Mute + Naprava ki ne posreduje paketkov drugih naprav. + Router + Infrastrukturno vozlišče za razširitev pokritosti omrežja s posredovanjem sporočil. Vidno na seznamu vozlišč. + Router Client + Kombinacija ROUTER in CLIENT. Ni za mobilne naprave. + Repeater + Infrastrukturno vozlišče za razširitev pokritosti omrežja s posredovanjem sporočil z minimalnimi stroški. Ni vidno na seznamu vozlišč. + Tracker + Prednostno oddaja paketke GPS položaja. + Sensor + Prednostno oddaja paketke telemetrije. + TAK + Optimizirano za komunikacijo sistema ATAK, zmanjšuje rutinsko oddajanje. + Client Hidden + Naprava, ki oddaja samo po potrebi zaradi prikritosti ali varčevanja z energijo. + Lost and Found + Redno oddaja lokacijo kot sporočilo privzetemu kanalu za pomoč pri vrnitvi naprave. + TAK Tracker + Omogoča samodejno oddajanje TAK PLI in zmanjšuje rutinsko oddajanje. + Router Late + Infrastrukturno vozlišče, ki vedno znova oddaja paketke enkrat, vendar šele po vseh drugih načinih, kar zagotavlja dodatno pokritost za lokalne gruče. Vidno na seznamu vozlišč. + All + Ponovno oddaja vsako opaženo sporočilo, če je bilo na našem zasebnem kanalu ali iz drugega omrežja z enakimi parametri. + All Skip Decoding + Enako kot vedenje ALL, vendar preskoči dekodiranje paketkov in jih preprosto ponovno odda. Na voljo samo v vlogi Repeater. Če to nastavite za katero koli drugo vlogo, bo to povzročilo vedenje ALL. + Local Only + Ignorira opažena sporočila tujih odprtih mrež, ali tistih, ki jih ne more dešifrirati. Ponovno oddaja samo sporočila na lokalnih primarnih/sekundarnih kanalih vozlišč. + Known Only + Ignorira opažena sporočila iz tujih mrež, kot je LOCAL ONLY, vendar gre korak dlje, tako da ignorira tudi sporočila vozlišč, ki še niso na seznamu znanih. + Brez + Dovoljeno samo za vloge SENSOR, TRACKER in TAK_TRACKER, prepovedano bo vsakršnje ponovno oddajanje, v nasprotju z vlogo CLIENT_MUTE. + Core Portnums Only + Ignorira nestandardne paketke, kot so: TAK, RangeTest, PaxCounter itd. Ponovno oddaja samo standardne paketke: NodeInfo, Text, Position, Telemetry in Routing. Obravnavaj dvojni pritisk na podprtih merilnikih pospeška kot pritisk uporabnika. - Onemogoči trikratni pritisk uporabniškega gumba za omogočanje ali onemogočanje GPS. - Upravlja utripajočo LED na napravi. Pri večini naprav bo to krmililo eno od največ 4 LED diod, LED napajanja in GPS ni mogoče nadzorovati. + Send a position on the primary channel when the user button is triple clicked. + Upravlja utripajočo LED na napravi. Pri večini naprav bo to krmililo eno od največ 4 LED diod, LED napajanja in GPS ni mogoče nadzorovati. + Time zone for dates on the device screen and log. Izbira ali je treba naš NeighborInfo poleg pošiljanja v MQTT in PhoneAPI posredovati tudi prek LoRa. Ni na voljo na kanalu s privzetim ključem in imenom. - Javni ključ + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Ime kanala QR koda Ikona aplikacije @@ -318,7 +380,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -396,27 +459,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -437,25 +500,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Regija + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -472,10 +537,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -487,7 +555,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -505,7 +573,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -520,7 +590,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Javni ključ Zasebni ključ Admin Key @@ -792,4 +864,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-sq-rAL/strings.xml b/app/src/main/res/values-sq-rAL/strings.xml index edfc4b546..f9d13aa0c 100644 --- a/app/src/main/res/values-sq-rAL/strings.xml +++ b/app/src/main/res/values-sq-rAL/strings.xml @@ -53,29 +53,91 @@ Çelësi publik i panjohur Çelës sesioni i gabuar Çelësi publik i paautorizuar - Pajisje e lidhur ose pajisje mesazhi autonome. - Pajisje që nuk kalon paketa nga pajisje të tjera. - Nyjë infrastrukture për zgjerimin e mbulimit të rrjetit duke transmetuar mesazhe. E dukshme në listën e nyjeve. - Kombinim i të dyjave ROUTER dhe CLIENT. Nuk është për pajisje mobile. - Nyjë infrastrukture për zgjerimin e mbulimit të rrjetit duke transmetuar mesazhe me ngarkesë minimale. Nuk është e dukshme në listën e nyjeve. - Transmeton paketa pozicioni GPS si prioritet. - Transmeton paketa telemetri si prioritet. - Optimizuar për komunikim në sistemin ATAK, zvogëlon transmetimet rutinë. - Pajisje që transmeton vetëm kur është e nevojshme për fshehtësi ose kursim energjie. - Transmeton vendndodhjen si mesazh në kanalin e parazgjedhur rregullisht për të ndihmuar në rikuperimin e pajisjeve. - Aktivizon transmetimet automatikisht TAK PLI dhe zvogëlon transmetimet rutinë. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Ritransmeton çdo mesazh të vërejtur, nëse ishte në kanalin tonë privat ose nga një tjetër rrjet me të njëjtat parametra LoRa. - Po të njëjtën sjellje si ALL, por kalon pa dekoduar paketat dhe thjesht i ritransmeton. I disponueshëm vetëm për rolin Repeater. Vendosja e kësaj në rolet e tjera do të rezultojë në sjelljen e ALL. - Injoron mesazhet e vëzhguara nga rrjete të huaja që janë të hapura ose ato që nuk mund t\'i dekodoj. Vetëm ritransmeton mesazhe në kanalet lokale primare / dytësore të nyjës. - Injoron mesazhet e vëzhguara nga rrjete të huaja si LOCAL ONLY, por e çon më tutje duke injoruar edhe mesazhet nga nyje që nuk janë në listën e njohur të nyjës. - Lejohet vetëm për rolet SENSOR, TRACKER dhe TAK_TRACKER, kjo do të pengojë të gjitha ritransmetimet, jo ndryshe nga roli CLIENT_MUTE. - Injoron paketat nga portnumra jo standardë si: TAK, RangeTest, PaxCounter, etj. Vetëm ritransmeton paketat me portnumra standard: NodeInfo, Text, Position, Telemetry, dhe Routing. + Client + Pajisje e lidhur ose pajisje mesazhi autonome. + Client Mute + Pajisje që nuk kalon paketa nga pajisje të tjera. + Router + Nyjë infrastrukture për zgjerimin e mbulimit të rrjetit duke transmetuar mesazhe. E dukshme në listën e nyjeve. + Router Client + Kombinim i të dyjave ROUTER dhe CLIENT. Nuk është për pajisje mobile. + Repeater + Nyjë infrastrukture për zgjerimin e mbulimit të rrjetit duke transmetuar mesazhe me ngarkesë minimale. Nuk është e dukshme në listën e nyjeve. + Tracker + Transmeton paketa pozicioni GPS si prioritet. + Sensor + Transmeton paketa telemetri si prioritet. + TAK + Optimizuar për komunikim në sistemin ATAK, zvogëlon transmetimet rutinë. + Client Hidden + Pajisje që transmeton vetëm kur është e nevojshme për fshehtësi ose kursim energjie. + Lost and Found + Transmeton vendndodhjen si mesazh në kanalin e parazgjedhur rregullisht për të ndihmuar në rikuperimin e pajisjeve. + TAK Tracker + Aktivizon transmetimet automatikisht TAK PLI dhe zvogëlon transmetimet rutinë. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Ritransmeton çdo mesazh të vërejtur, nëse ishte në kanalin tonë privat ose nga një tjetër rrjet me të njëjtat parametra LoRa. + All Skip Decoding + Po të njëjtën sjellje si ALL, por kalon pa dekoduar paketat dhe thjesht i ritransmeton. I disponueshëm vetëm për rolin Repeater. Vendosja e kësaj në rolet e tjera do të rezultojë në sjelljen e ALL. + Local Only + Injoron mesazhet e vëzhguara nga rrjete të huaja që janë të hapura ose ato që nuk mund t\'i dekodoj. Vetëm ritransmeton mesazhe në kanalet lokale primare / dytësore të nyjës. + Known Only + Injoron mesazhet e vëzhguara nga rrjete të huaja si LOCAL ONLY, por e çon më tutje duke injoruar edhe mesazhet nga nyje që nuk janë në listën e njohur të nyjës. + Asnjë + Lejohet vetëm për rolet SENSOR, TRACKER dhe TAK_TRACKER, kjo do të pengojë të gjitha ritransmetimet, jo ndryshe nga roli CLIENT_MUTE. + Core Portnums Only + Injoron paketat nga portnumra jo standardë si: TAK, RangeTest, PaxCounter, etj. Vetëm ritransmeton paketat me portnumra standard: NodeInfo, Text, Position, Telemetry, dhe Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Emri i kanalit radio Kodi QR Ikona e aplikacionit @@ -314,7 +376,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Enabled + UDP Broadcast UDP Config Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -392,27 +455,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Role - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Device + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -433,25 +496,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem Preset + LoRa + Options + Advanced + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Rajon + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -468,10 +533,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Network + WiFi Options + Enabled WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -483,7 +551,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -501,7 +569,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -516,7 +586,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Security + Direct Message Key + Admin Keys Public Key Private Key Admin Key @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-srp/strings.xml b/app/src/main/res/values-srp/strings.xml index e3444d19e..2cab4ec03 100644 --- a/app/src/main/res/values-srp/strings.xml +++ b/app/src/main/res/values-srp/strings.xml @@ -53,29 +53,91 @@ Непознат јавни кључ Лош кључ сесије Јавни кључ није ауторизован - Повезана апликација или самостални уређај за слање порука. - Уређај који не прослеђује пакете са других уређаја. - Инфраструктурни чвор за проширење покривености мреже прослеђивањем порука. Видљив на листи чворова. - Комбинација и РУТЕРА и КЛИЈЕНТА. Нису намењени за мобилне уређаје. - Инфраструктурни чвор за проширење покривености мреже прослеђивањем порука са минималним трошковима енергије. Није видљив на листи чворова. - Емитује GPS пакете положаја као приоритет. - Преноси телеметријске пакете као приоритетне. - Оптимизовано за комуникацију у ATAK систему, смањује рутинске преносе. - Уређај који преноси само када је потребно ради скривености или уштеде енергије. - Преноси локацију као поруку на подразумевани канал редовно како би помогао у проналаску уређаја. - Омогућава аутоматске TAK PLI преносе и смањује рутинске преносе. - Инфраструктурни чвор који увек поново емитује пакете само једном, али тек након свих других режима, обезбеђујући додатно покривање за локалне кластере. Видљиво на листи чворова. - Поново преноси сваку примећену поруку, ако је била на нашем приватном каналу или из друге мреже са истим LoRA параметрима. - Исто као понашање као ALL, али прескаче декодирање пакета и једноставно их поново преноси. Доступно само у Repeater улози. Постављање овога на било коју другу улогу резултираће ALL понашањем. - Игнорише примећене поруке из страних мрежа које су отворене или оне које не може да декодира. Поново преноси поруку само на локалне примарне/секундарне канале чвора. - Игнорише примећене поруке из страних мрежа као LOCAL ONLY, али иде корак даље тако што такође игнорише поруке са чворова који нису већ на листи познатих чворова. - Дозвољено само за улоге SENSOR, TRACKER и TAK_TRACKER, ово ће онемогућити све поновне преносе, слично као улога CLIENT_MUTE. - Игнорише пакете са нестандардним бројевима порта као што су: TAK, RangeTest, PaxCounter, итд. Поново преноси само пакете са стандардним бројевима порта: NodeInfo, Text, Position, Telemetry и Routing. + Клијент + Повезана апликација или самостални уређај за слање порука. + Клијент мутиран + Уређај који не прослеђује пакете примљене од других уређаја. + Рутер + Инфраструктурни чвор за проширење покривености мреже прослеђивањем порука. Видљив на листи чворова. + Router Client + Комбинација и РУТЕРА и КЛИЈЕНТА. Нису намењени за мобилне уређаје. + Поновљач + Инфраструктурни чвор за проширење покривености мреже прослеђивањем порука са минималним трошковима енергије. Није видљив на листи чворова. + Трекер + Емитује пакете са GPS позицијом као приоритет. + Сензор + Емитује телеметријске пакете као приоритет. + TAK + Оптимизован за комуникацију са ATAK системом, смањује рутинске емисије. + Скривени клијент + Уређај који емитује само по потреби ради прикривености или уштеде енергије. + Изгубљено и нађено + Редовно емитује локацију као поруку подразумеваном каналу ради помоћи при проналаску уређаја. + ТАК Трекер + Омогућава аутоматске TAK PLI емисије и смањује рутинске емисије. + Рутер са кашњењем + Инфраструктурни чвор који увек поново емитује пакете само једном, али тек након свих других режима, обезбеђујући додатно покривање за локалне кластере. Видљиво на листи чворова. + Сви + Поново преноси сваку примећену поруку, ако је била на нашем приватном каналу или из друге мреже са истим LoRA параметрима. + All Skip Decoding + Исто као понашање као ALL, али прескаче декодирање пакета и једноставно их поново преноси. Доступно само у Repeater улози. Постављање овога на било коју другу улогу резултираће ALL понашањем. + Local Only + Игнорише примећене поруке из страних мрежа које су отворене или оне које не може да декодира. Поново преноси поруку само на локалне примарне/секундарне канале чвора. + Known Only + Игнорише примећене поруке из страних мрежа као LOCAL ONLY, али иде корак даље тако што такође игнорише поруке са чворова који нису већ на листи познатих чворова. + Ништа + Дозвољено само за улоге SENSOR, TRACKER и TAK_TRACKER, ово ће онемогућити све поновне преносе, слично као улога CLIENT_MUTE. + Core Portnums Only + Игнорише пакете са нестандардним бројевима порта као што су: TAK, RangeTest, PaxCounter, итд. Поново преноси само пакете са стандардним бројевима порта: NodeInfo, Text, Position, Telemetry и Routing. Третирај двоструки тап на подржаним акцелерометрима као притисак корисничког дугмета. - Онемогућава троструко притискање корисничког дугмета за укључивање или искључивање GPS-а. - Контролише трепћућу LED лампицу на уређају. За већину уређаја ово ће контролисати једну од до 4 LED лампице, LED лампице за пуњач и GPS нису контролисане. + Пошаљи позицију на примарном каналу када се корисничко дугме три пута кликне. + Контролише трепћућу LED лампицу на уређају. За већину уређаја ово ће контролисати једну од до 4 LED лампице, LED лампице за пуњач и GPS нису контролисане. + Временска зона за датуме на екрану уређаја и у евиденцији. Да ли би поред слања на MQTT и PhoneAPI, наша NeighborInfo требало да се преноси преко LoRa? Није доступно на каналу са подразумеваним кључем и именом. - Јавни кључ + Колико дуго екран остаје укључен након притиска корисничког дугмета или пријема порука. + Аутоматски се пребацује на следећу страницу на екрану као карусел, на основу наведеног интервала. + Смер компаса на екрану изван круга увек ће указивати на север. + Flip screen vertically. + Units displayed on the device screen. + Премаши аутоматско откривање OLED екрана. + Override default screen layout. + Bold the heading text on the screen. + Захтева да уређај има акцелерометар. + Регион у коме ћете користити ваше радио уређаје. + Доступна унапред подешена подешавања модема, подразумевана је Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Оперативна фреквенција вашег нода се израчунава на основу региона, модемског пресета и овог поља. Када је 0, слот се аутоматски израчунава на основу назива примарног канала. + Омогућавање ВајФаја ће онемогућити блутут везу са апликацијом. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + Минимална промена растојања у метрима која ће се узети у обзир за паметно емитовање позиције. + Колико често треба да покушамо да добијемо GPS позицију. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Спаваће све што је више могуће, за улогу трагача и сензора ово ће укључивати и лора радио. Не користите ово подешавање ако желите да користите свој уређај са мобилним апликацијама или користите уређај без корисничког дугмета. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Користи се за креирање заједничког кључа са удаљеним уређајем. + The public key authorized to send admin messages to this node. + Уређајем управља администратор мреже, корисник не може да приступи ниједном подешавању уређаја. + Серијска конзола преко Stream API-ја. + Излаз дебаговања уживо преко серијског интерфејса, прегледајте и извозите логове уређаја са редукованим позицијама преко блутута. + + Пакети позиција + Интервал емитовања + Паметно позиционирање + Минимални интервал + Минимум раздаљине + GPS уређај + Фиксна локација + Висина + Интервал ажурирања + Напредне поставке GPS уређаја + GPS пријем GPIO + GPS предаја GPIO + GPS EN GPIO + GPIO + Дебагуј Назив канала QR код иконица апликације @@ -316,7 +378,8 @@ Низак ниво батерије: %s Нотификације о ниском нивоу батерије (омиљени чворови) Барометарски притисак - Mesh via UDP enabled + Омогућено + UDP Broadcast UDP конфигурација Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -394,27 +457,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Подешавања уређаја - Улога - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX Timezone - Disable LED heartbeat - Подешавања приказа - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Уређај + Улога уређаја + Дугме GPIO + Звучни сигнал GPIO + Режим реемитовања + Интервал емитовања информација о чвору + Двоструки додир као дугме + Троструки клик за Ad Hoc пинг + Временска зона + LED срчани откуцаји + Приказ + Екран укључен за + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Увек усмеравајте на север + Bold Heading + Wake on tap or motion Compass orientation Подешавање спољних обавештења External notification enabled @@ -435,25 +498,27 @@ Nag timeout (seconds) Мелодија звона Use I2S as buzzer - LoRA подешавања - Use modem preset - Modem Preset + LoRA + Опције + Напредно + Користи предефинисано подешавање + Унапред подешено Проток - Spread factor - Coding rate + Фактор ширења + Стопа кодирања Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Регион + Број хопова + Трансмитер укључен + Transmit Power + Фреквенцијски слот Override Duty Cycle Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + Појачање пријемника + Измена фреквенције PA fan disabled Игнориши MQTT - OK to MQTT + Позитиван за MQTT MQTT подешавања MQTT enabled Адреса @@ -470,10 +535,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Конфигурација мреже + Мрежа + Опције вајфаја + Омогућено WiFi enabled SSID PSK + Етернет опције Ethernet enabled NTP server rsyslog server @@ -485,7 +553,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Подешавања позиције + Позиција Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -503,7 +571,9 @@ Position flags Подешавања напајња Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -518,7 +588,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Сигурносна подешавања + Сигурност + Direct Message Key + Admin Keys Јавни кључ Приватни кључ Admin Key @@ -790,4 +862,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-sv-rSE/strings.xml b/app/src/main/res/values-sv-rSE/strings.xml index 3f8774433..359186e46 100644 --- a/app/src/main/res/values-sv-rSE/strings.xml +++ b/app/src/main/res/values-sv-rSE/strings.xml @@ -53,29 +53,91 @@ Okänd publik nyckel Felaktig sessionsnyckel Obehörig publik nyckel - App uppkopplad eller fristående nod. - Nod som inte vidarebefordrar meddelanden. - Nod som utökar nätverket igenom att vidarebefordra meddelanden. Syns i nod listan. - Kombinerad ROUTER och CLIENT. Ej för mobila noder. - Nod som utökar nätverket igenom att vidarebefordra meddelanden utan egen information. Syns ej i nod listan. - Nod som prioriterar GPS meddelanden. - Nod som prioriterar telemetri meddelanden. - Roll optimerad för användning tillsammans med ATAK. - Nod som endast kommunicerar vid behov för att gömma sig och samtidigt hålla nere strömförbrukningen. - Skickar regelbundet ut GPS position på standardkanalen för att assistera vid uppsökande. - Skickar automatiskt ut GPS position för användning med ATAK. - Nod som utökar nätverket igenom att vidarebefordra meddelanden men endast efter alla noder. Syns i nod listan. - Vidarebefordra alla mottagna meddelanden med samma lora inställningar. - Vidarebefordra alla mottagna meddelanden med samma lora inställningar utan avkodning. Endast valbar som REPEATER. Om vald med annan roll används ALL. - Ignorerar mottagna meddelanden från okända kanaler som är öppna eller krypterade. Vidarebefordrar endast meddelanden för nodens primära och sekundära kanaler. - Ignorerar mottagna meddelanden från okända meshnätverk som är öppna eller krypterade samt från noder som inte finns i nod listan. Vidarebefordrar endast meddelanden för kända kanaler. - Endast för SENSOR, TRACKER och TAK_TRACKER. Stoppar all annan vidarebefordran av meddelanden. - Ignorerar meddelanden från icke-standard portnummer. Exempelvis: TAK, RangeTest, PaxCounters, etc. Vidarebefordrar endast standard portnummer. Exempelvis: NodeInfo, Text, Position, Telemetri och Routing. + Client + App uppkopplad eller fristående nod. + Client Mute + Nod som inte vidarebefordrar meddelanden. + Router + Nod som utökar nätverket igenom att vidarebefordra meddelanden. Syns i nod listan. + Router Client + Kombinerad ROUTER och CLIENT. Ej för mobila noder. + Repeater + Nod som utökar nätverket igenom att vidarebefordra meddelanden utan egen information. Syns ej i nod listan. + Tracker + Nod som prioriterar GPS meddelanden. + Sensor + Nod som prioriterar telemetri meddelanden. + TAK + Roll optimerad för användning tillsammans med ATAK. + Client Hidden + Nod som endast kommunicerar vid behov för att gömma sig och samtidigt hålla nere strömförbrukningen. + Lost and Found + Skickar regelbundet ut GPS position på standardkanalen för att assistera vid uppsökande. + TAK Tracker + Skickar automatiskt ut GPS position för användning med ATAK. + Router Late + Nod som utökar nätverket igenom att vidarebefordra meddelanden men endast efter alla noder. Syns i nod listan. + Alla + Vidarebefordra alla mottagna meddelanden med samma lora inställningar. + All Skip Decoding + Vidarebefordra alla mottagna meddelanden med samma lora inställningar utan avkodning. Endast valbar som REPEATER. Om vald med annan roll används ALL. + Local Only + Ignorerar mottagna meddelanden från okända kanaler som är öppna eller krypterade. Vidarebefordrar endast meddelanden för nodens primära och sekundära kanaler. + Known Only + Ignorerar mottagna meddelanden från okända meshnätverk som är öppna eller krypterade samt från noder som inte finns i nod listan. Vidarebefordrar endast meddelanden för kända kanaler. + Ingen + Endast för SENSOR, TRACKER och TAK_TRACKER. Stoppar all annan vidarebefordran av meddelanden. + Core Portnums Only + Ignorerar meddelanden från icke-standard portnummer. Exempelvis: TAK, RangeTest, PaxCounters, etc. Vidarebefordrar endast standard portnummer. Exempelvis: NodeInfo, Text, Position, Telemetri och Routing. Dubbelklick på supporterad accelerometer räknas som användarknapp. - Stäng av funktion för att slå av- och på GPS med hjälp av att klicka på användarknapp tre gånger. - Kontrollerar den blinkande LED lampan på enheten. På dom flesta enheter kontrollerar det här en av de fyra LED lampor monterade. Laddning och GPS lamporna går inte att kontrollera. + Send a position on the primary channel when the user button is triple clicked. + Kontrollerar den blinkande LED lampan på enheten. På dom flesta enheter kontrollerar det här en av de fyra LED lampor monterade. Laddning och GPS lamporna går inte att kontrollera. + Time zone for dates on the device screen and log. Ange om NeighborInfo ska skickas ut över LoRa utöver igenom MQTT och PhoneAPI. Ej applicerbart på kanalen med standard namn och nyckel. - Publik nyckel + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Sändningsintervall + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fast plats + Altitud + Uppdateringsintervall + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Felsökning Kanalnamn QR-kod applikationsikon @@ -314,7 +376,8 @@ Low battery: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Aktiverad + UDP Broadcast UDP-konfiguration Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -392,27 +455,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Device Config - Roll - Redefine PIN_BUTTON - Redefine PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - POSIX-tidszon - Disable LED heartbeat - Display Config - Screen timeout (seconds) - GPS coordinates format - Auto screen carousel (seconds) + Enhet + Device Role + Button GPIO + Buzzer GPIO + Återutsändningsläge + Sändningsintervall för nod-info + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Display + Screen on for + Carousel interval Compass north top Flip screen Display units - Override OLED auto-detect + OLED type Display mode - Heading bold - Wake screen on tap or motion + Always point north + Fetstil för rubriktext + Wake on tap or motion Compass orientation External Notification Config External notification enabled @@ -433,25 +496,27 @@ Nag timeout (seconds) Ringtone Use I2S as buzzer - LoRa Config - Use modem preset - Modem-förinställningar + LoRa + Options + Advancerat + Använd förinställning + Presets Bandbredd - Spread factor - Coding rate + Spread Factor + Kodningshastighet Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX enabled - TX power (dBm) - Frequency slot + Region + Antal hopp + Sändning aktiverad + Sändningseffekt + Frekvens-slot Ersätt gräns för driftsperiod Ignore incoming - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignorera MQTT - OK till MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -468,10 +533,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Network Config + Nätverk + WiFi Options + Aktiverad WiFi enabled SSID PSK + Ethernet Options Ethernet enabled NTP server rsyslog server @@ -483,7 +551,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Plats Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -501,7 +569,9 @@ Position flags Power Config Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -516,7 +586,9 @@ Remote Hardware enabled Allow undefined pin access Available pins - Security Config + Säkerhet + Direct Message Key + Admin Keys Publik nyckel Privat nyckel Admin Key @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-tr-rTR/strings.xml b/app/src/main/res/values-tr-rTR/strings.xml index 758ee49cf..bc6c37709 100644 --- a/app/src/main/res/values-tr-rTR/strings.xml +++ b/app/src/main/res/values-tr-rTR/strings.xml @@ -53,29 +53,91 @@ Bilinmeyen Genel Anahtar Hatalı oturum anahtarı Genel Anahtar yetkisiz - Uygulamaya bağlı veya bağımsız mesajlaşma cihazı. - Diğer cihazlardan gelen paketleri tekrarlamayan cihaz. - Mesajları tekrarlayarak ağ kapsamını genişletmek için altyapı düğümü. Düğümler listesinde görünür. - Hem ROUTER hem de CLIENT\'ın bir kombinasyonu. Mobil cihazlar için değildir. - Mesajları minimum ek yük ile tekrarlayarak ağ kapsamını genişletmek için altyapı düğümü. Düğümler listesinde görünmez. - Öncelikli olarak konum paketlerini yayınlar. - Öncelikli olarak telemetri paketlerini yayınlar. - Rutin yayınları azaltarak ATAK sistemi için optimize edilmiştir. - Gizlilik veya güç tasarrufu için sadece gerektiğinde yayın yapan cihaz. - Cihazın kurtarılmasına yardımcı olmak için konumunu düzenli olarak varsayılan kanala mesaj olarak gönderir. - Rutin yayınları azaltarak otomatik TAK PLI yayınlarını etkinleştirir. - Tüm diğer modlardan sonra paketleri her zaman bir kez yeniden yayınlayan ve yerel kümeler için ek kapsama alanı sağlayan altyapı düğümü. Düğümler listesinde görünür. - Tespit edilen herhangi bir mesajı, özel kanalımızdaysa veya aynı LoRa parametrelerine sahip başka bir ağdan geliyorsa yeniden yayınlayın. - ALL ile aynı davranış, ancak paketleri çözmeksizin yeniden yayınlar. Yalnızca Repeater rolünde kullanılabilir. Bunu başka herhangi bir rolde ayarlamak ALL davranışıyla sonuçlanacaktır. - Açık olan veya şifresini çözemediği yabancı ağlardan geldiği tespit edilen mesajları yok sayar. Yalnızca düğümlerin yerel birincil / ikincil kanallarında mesajı yeniden yayınlar. - LOCAL ONLY gibi yabancı ağlardan geldiği tespit edilen mesajları yok sayar, ancak düğümün bilinen listesinde bulunmayan düğümlerden gelen mesajları da yok sayarak bir adım daha ileri gider. - Yalnızca SENSOR, TRACKER ve TAK_TRACKER rolleri için izin verilir, CLIENT_MUTE rolünden farklı olarak tüm yeniden yayınları engeller. - TAK, RangeTest, PaxCounter gibi standart olmayan portnum\'ları yok sayarken sadece standart portnum\'lar olan NodeInfo, Text, Position, Telemetry ve Routing\'i yeniden yayınlar. + Client + Uygulamaya bağlı veya bağımsız mesajlaşma cihazı. + Client Mute + Diğer cihazlardan gelen paketleri tekrarlamayan cihaz. + Router + Mesajları tekrarlayarak ağ kapsamını genişletmek için altyapı düğümü. Düğümler listesinde görünür. + Router Client + Hem ROUTER hem de CLIENT\'ın bir kombinasyonu. Mobil cihazlar için değildir. + Repeater + Mesajları minimum ek yük ile tekrarlayarak ağ kapsamını genişletmek için altyapı düğümü. Düğümler listesinde görünmez. + Tracker + Öncelikli olarak konum paketlerini yayınlar. + Sensor + Öncelikli olarak telemetri paketlerini yayınlar. + TAK + Rutin yayınları azaltarak ATAK sistemi için optimize edilmiştir. + Client Hidden + Gizlilik veya güç tasarrufu için sadece gerektiğinde yayın yapan cihaz. + Lost and Found + Cihazın kurtarılmasına yardımcı olmak için konumunu düzenli olarak varsayılan kanala mesaj olarak gönderir. + TAK Tracker + Rutin yayınları azaltarak otomatik TAK PLI yayınlarını etkinleştirir. + Router Late + Tüm diğer modlardan sonra paketleri her zaman bir kez yeniden yayınlayan ve yerel kümeler için ek kapsama alanı sağlayan altyapı düğümü. Düğümler listesinde görünür. + Hepsi + Tespit edilen herhangi bir mesajı, özel kanalımızdaysa veya aynı LoRa parametrelerine sahip başka bir ağdan geliyorsa yeniden yayınlayın. + All Skip Decoding + ALL ile aynı davranış, ancak paketleri çözmeksizin yeniden yayınlar. Yalnızca Repeater rolünde kullanılabilir. Bunu başka herhangi bir rolde ayarlamak ALL davranışıyla sonuçlanacaktır. + Local Only + Açık olan veya şifresini çözemediği yabancı ağlardan geldiği tespit edilen mesajları yok sayar. Yalnızca düğümlerin yerel birincil / ikincil kanallarında mesajı yeniden yayınlar. + Known Only + LOCAL ONLY gibi yabancı ağlardan geldiği tespit edilen mesajları yok sayar, ancak düğümün bilinen listesinde bulunmayan düğümlerden gelen mesajları da yok sayarak bir adım daha ileri gider. + Yok + Yalnızca SENSOR, TRACKER ve TAK_TRACKER rolleri için izin verilir, CLIENT_MUTE rolünden farklı olarak tüm yeniden yayınları engeller. + Core Portnums Only + TAK, RangeTest, PaxCounter gibi standart olmayan portnum\'ları yok sayarken sadece standart portnum\'lar olan NodeInfo, Text, Position, Telemetry ve Routing\'i yeniden yayınlar. Desteklenen ivmeölçerlere çift dokunmayı kullanıcı düğmesine basma olarak değerlendirir. - GPS\'i etkinleştirmek veya devre dışı bırakmak için kullanıcı düğmesine üç kez basılmasını devre dışı bırakır. - Cihaz üzerindeki yanıp sönen LED\'i kontrol eder. Çoğu cihaz için bu, en fazla 4 LED\'den birini kontrol edecektir, şarj ve GPS LED\'leri kontrol edilemez. + Send a position on the primary channel when the user button is triple clicked. + Cihaz üzerindeki yanıp sönen LED\'i kontrol eder. Çoğu cihaz için bu, en fazla 4 LED\'den birini kontrol edecektir, şarj ve GPS LED\'leri kontrol edilemez. + Time zone for dates on the device screen and log. MQTT ve PhoneAPI\'ye göndermenin yanı sıra, NeighborInfo\'muzun LoRa üzerinden iletilip iletilmeyeceğidir. Varsayılan anahtar ve ada sahip bir kanalda kullanılamaz. - Genel Anahtar + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Rakım + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Hata Ayıklama Kanal Adı Karekod uygulama ikonu @@ -314,7 +376,8 @@ Düşük pil: %s Düşük pil bildirimleri (favori düğümler) Barometrik Basınç - UDP üzerinden Mesh etkinleştirildi + Açık + UDP Broadcast UDP Ayarları Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Konumunumu aç/kapa @@ -392,27 +455,27 @@ İzlenecek GPIO pini Algılama tetikleme türü INPUT_PULLUP modu kullan - Cihaz Ayarı - Rol - PIN_BUTTON yeniden tanımla - PIN_BUZZER yeniden tanımla - Yeniden yayın modu - NodeInfo yayın aralığı (saniye) - Çift tıklamayı düğmeye basma olarak kabul et - Üçlü tıklamayı devre dışı bırak - POSIX Zaman Dilimi - LED kalp atışını devre dışı bırak - Akran Ayarı - Ekran zaman aşımı (saniye) - GPS koordinat formatı - Otomatik ekran kayması (saniye) + Cihaz + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Bilgisi Yayın Aralığı + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Ekran + Screen on for + Carousel interval Pusula kuzey üstte Ekranı Çevir Görüntü Birimleri - OLED otomatik algılamayı geçersiz kıl + OLED type Görüntü Modu - Başlık kalın - Ekrana dokunuş veya hareketle uyan + Always point north + Bold Heading + Wake on tap or motion Pusula yönü Harici Bildirim Ayarı Harici bildirim etkin @@ -433,25 +496,27 @@ Nag zaman aşımı (saniye) Zil tipi I2S\'yi zırnı olarak kullan - LoRa Ayarı - Modem ön ayarını kullan - Modem Ön Ayarı + LoRa + Options + Gelişmiş + Use Preset + Presets Bant genişliği - Yayılma faktörü - Kodlama oranı + Spread Factor + Coding Rate Frekans kayması (MHz) - Bölge (frekans planı) - Sıçrama limiti - TX etkin - TX gücü (dBm) - Frekans slotu + Bölge + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Görev Döngüsünü Geçersiz Kıl Gelenleri Yoksay - SX126X RX arttırılmış kazanç - Frekansı Geçersiz Kıl (MHz) + RX Boosted Gain + Frequency Override PA fanı devre dışı MQTT\'yi Yoksay - MQTT\'ye Tamam + Ok to MQTT MQTT Yapılandırması MQTT etkin Adres @@ -468,10 +533,13 @@ Komşu Bilgisi etkin Güncelleme aralığı (saniye) LoRa üzerinden ilet - Ağ Ayarı + Ağ + WiFi Options + Açık WiFi etkin SSID PSK + Ethernet Options Ethernet etkin NTP sunucusu rsyslog sunucusu @@ -483,7 +551,7 @@ Pax sayacı etkin WiFi RSSI eşiği (varsayılan -80) BLE RSSI eşiği (varsayılan -80) - Konum Ayarı + Konum Konum yayılma aralığı (saniye) Akıllı konum etkin Akıllı yayılma minimum mesafe (metre) @@ -501,7 +569,9 @@ Konum bayrakları Güç Ayarı Güç tasarrufu modunu etkinleştir + Shutdown on power loss Pilin kapanma gecikmesi (saniye) + ADC multiplier override ADC çarpanını geçersiz kılma oranı Bluetooth bekleme süresi (saniye) Süper derin uyku süresi (saniye) @@ -516,7 +586,9 @@ Uzak Donanım etkin Tanımlanmamış pin erişimine izin ver Mevcut pinler - Güvenlik Ayarı + Güvenlik + Direct Message Key + Admin Keys Genel Anahtar Özel Anahtar Yönetici Anahtarı @@ -788,4 +860,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-uk-rUA/strings.xml b/app/src/main/res/values-uk-rUA/strings.xml index e909bca7a..24f50ff01 100644 --- a/app/src/main/res/values-uk-rUA/strings.xml +++ b/app/src/main/res/values-uk-rUA/strings.xml @@ -53,29 +53,91 @@ Unknown Public Key Bad session key Public Key unauthorized - App connected or standalone messaging device. - Device that does not forward packets from other devices. - Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. - Combination of both ROUTER and CLIENT. Not for mobile devices. - Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. - Broadcasts GPS position packets as priority. - Broadcasts telemetry packets as priority. - Optimized for ATAK system communication, reduces routine broadcasts. - Device that only broadcasts as needed for stealth or power savings. - Broadcasts location as message to default channel regularly for to assist with device recovery. - Enables automatic TAK PLI broadcasts and reduces routine broadcasts. - Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. - Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. - Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. - Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. - Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. - Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. - Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. + Client + App connected or standalone messaging device. + Client Mute + Device that does not forward packets from other devices. + Router + Infrastructure node for extending network coverage by relaying messages. Visible in nodes list. + Router Client + Combination of both ROUTER and CLIENT. Not for mobile devices. + Repeater + Infrastructure node for extending network coverage by relaying messages with minimal overhead. Not visible in nodes list. + Tracker + Broadcasts GPS position packets as priority. + Sensor + Broadcasts telemetry packets as priority. + TAK + Optimized for ATAK system communication, reduces routine broadcasts. + Client Hidden + Device that only broadcasts as needed for stealth or power savings. + Lost and Found + Broadcasts location as message to default channel regularly for to assist with device recovery. + TAK Tracker + Enables automatic TAK PLI broadcasts and reduces routine broadcasts. + Router Late + Infrastructure node that always rebroadcasts packets once but only after all other modes, ensuring additional coverage for local clusters. Visible in nodes list. + All + Rebroadcast any observed message, if it was on our private channel or from another mesh with the same lora parameters. + All Skip Decoding + Same as behavior as ALL but skips packet decoding and simply rebroadcasts them. Only available in Repeater role. Setting this on any other roles will result in ALL behavior. + Local Only + Ignores observed messages from foreign meshes that are open or those which it cannot decrypt. Only rebroadcasts message on the nodes local primary / secondary channels. + Known Only + Ignores observed messages from foreign meshes like LOCAL ONLY, but takes it step further by also ignoring messages from nodes not already in the node\'s known list. + None + Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. + Core Portnums Only + Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. Treat double tap on supported accelerometers as a user button press. - Disables the triple-press of user button to enable or disable GPS. - Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Send a position on the primary channel when the user button is triple clicked. + Controls the blinking LED on the device. For most devices this will control one of the up to 4 LEDs, the charger and GPS LEDs are not controllable. + Time zone for dates on the device screen and log. Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. Not available on a channel with default key and name. - Public Key + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Висота + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + Debug Ім\'я каналу QR код значок додатку @@ -318,7 +380,8 @@ Низький заряд батареї: %s Low battery notifications (favorite nodes) Barometric Pressure - Mesh via UDP enabled + Увімкнено + UDP Broadcast Налаштування UDP Last heard: %2$s
Last position: %3$s
Battery: %4$s]]> Toggle my position @@ -396,27 +459,27 @@ GPIO pin to monitor Detection trigger type Use INPUT_PULLUP mode - Конфігурація пристрою - Роль - Перевизначити PIN_BUTTON - Перевизначити PIN_BUZZER - Rebroadcast mode - NodeInfo broadcast interval (seconds) - Double tap as button press - Disable triple-click - Часова зона POSIX - Disable LED heartbeat - Налаштування дисплею - Тайм-аут екрану (секунд) - GPS coordinates format - Auto screen carousel (seconds) + Пристрій + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + Дисплей + Screen on for + Carousel interval Compass north top Перевернути екран Display units - Override OLED auto-detect + OLED type Режим екрану - Heading bold - Wake screen on tap or motion + Always point north + Bold Heading + Wake on tap or motion Орієнтація компаса External Notification Config External notification enabled @@ -437,25 +500,27 @@ Nag timeout (seconds) Мелодія Use I2S as buzzer - Налаштування LoRa - Use modem preset - Modem Preset + LoRa + Options + Розширені + Use Preset + Presets Bandwidth - Spread factor - Coding rate + Spread Factor + Coding Rate Frequency offset (MHz) - Region (frequency plan) - Hop limit - TX увімкнено - Потужність TX (dBm) - Frequency slot + Регіон + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot Override Duty Cycle Ігнорувати вхідні - SX126X RX boosted gain - Override frequency (MHz) + RX Boosted Gain + Frequency Override PA fan disabled Ignore MQTT - OK to MQTT + Ok to MQTT MQTT Config MQTT enabled Address @@ -472,10 +537,13 @@ Neighbor Info enabled Update interval (seconds) Transmit over LoRa - Налаштування мережі + Мережа + WiFi Options + Увімкнено WiFi увімкнено SSID PSK + Ethernet Options Ethernet увімкнено NTP-сервер rsyslog-сервер @@ -487,7 +555,7 @@ Paxcounter enabled WiFi RSSI threshold (defaults to -80) BLE RSSI threshold (defaults to -80) - Position Config + Position Position broadcast interval (seconds) Smart position enabled Smart broadcast minimum distance (meters) @@ -505,7 +573,9 @@ Position flags Налаштування живлення Enable power saving mode + Shutdown on power loss Shutdown on battery delay (seconds) + ADC multiplier override ADC multiplier override ratio Wait for Bluetooth duration (seconds) Super deep sleep duration (seconds) @@ -520,7 +590,9 @@ Remote Hardware enabled Allow undefined pin access Доступні піни - Налаштування безпеки + Безпека + Direct Message Key + Admin Keys Public Key Private Key Ключ адміністратора @@ -792,4 +864,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-zh-rCN/strings.xml b/app/src/main/res/values-zh-rCN/strings.xml index 4de0484dd..a3f8ba854 100644 --- a/app/src/main/res/values-zh-rCN/strings.xml +++ b/app/src/main/res/values-zh-rCN/strings.xml @@ -53,29 +53,91 @@ 未知公钥 会话密钥错误 未授权的公钥 - 应用配对或独立使用的消息传递设备 - 不转发其他设备数据包的设备 - 用于通过转发消息扩展网络覆盖范围的基础设施节点。可在节点列表中看到。 - 同时兼具路由器和客户端功能的设备。不适用于移动设备。 - 通过最低开销转发消息扩展网络覆盖的基础设施节点。不可见于节点列表。 - 优先广播 GPS 位置数据包 - 优先广播遥测数据包 - 优化ATAK系统通讯，减少常规广播。 - 仅在需要时广播的设备，用于隐蔽或节能模式 - 定期向默认频道广播位置，以协助设备恢复。 - 启用自动 TAK PLI 广播并减少常规广播。 - 基础设施节点，总是在所有其他模式之后重新广播数据包一次，以确保本地集群的额外覆盖范围。会在节点列表中显示。 - 重新广播任何观察到的消息，无论是来自我们的私有频道还是具有相同 LoRa 参数的其他网状网络。 - 与 ALL 模式的行为相同，但跳过数据包解码，仅简单地重新广播它们。仅适用于中继器角色。在其他角色中设置此选项将表现为 ALL 模式。 - 忽略来自开放网状网络或无法解密的消息，仅在节点的本地主/次频道上重新广播消息。 - 与 LOCAL_ONLY 类似，忽略来自其他网状网络的消息，但更进一步，忽略来自不在节点已知列表中的节点的消息。 - 仅限 SENSOR、TRACKER 和 TAK_TRACKER 角色，此模式将禁止所有重新广播，与 CLIENT_MUTE 角色类似。 - 忽略来自非标准端口号（如 TAK、RangeTest、PaxCounter 等）的数据包，仅重新广播标准端口号的数据包：NodeInfo、Text、Position、Telemetry 和 Routing。 + 客户端 + 应用配对或独立使用的消息传递设备 + 客户端静默 + 不转发其他设备数据包的设备。 + 路由 + 用于通过转发消息扩展网络覆盖范围的基础设施节点。可在节点列表中看到。 + Router Client + 同时兼具路由器和客户端功能的设备。不适用于移动设备。 + 中继 + 通过最低开销转发消息扩展网络覆盖的基础设施节点。不可见于节点列表。 + 追踪器 + 定位模式 - 用于作为 GPS 跟踪器。从该设备发送的定位数据包优先级较高，每两分钟广播一次。智能位置广播默认为关闭。 + 传感器 + 将遥测数据包优先广播。 + TAK + 针对 ATAK 系统通信进行优化，减少常规广播。 + 客户端隐藏 + 只在需要时才广播的设备，以达到隐蔽或省电的目的。 + 失物招领 + 定期向默认信道发送位置信息，以协助设备恢复。 + TAK 追踪器 + 启用自动 TAK PLI（Position Location Information）广播，并减少常规广播。 + Router Late + 基础设施节点，总是在所有其他模式之后重新广播数据包一次，以确保本地集群的额外覆盖范围。会在节点列表中显示。 + 全部 + 重新广播任何观察到的消息，无论是来自我们的私有频道还是具有相同 LoRa 参数的其他网状网络。 + All Skip Decoding + 与 ALL 模式的行为相同，但跳过数据包解码，仅简单地重新广播它们。仅适用于中继器角色。在其他角色中设置此选项将表现为 ALL 模式。 + Local Only + 忽略来自开放网状网络或无法解密的消息，仅在节点的本地主/次频道上重新广播消息。 + Known Only + 与 LOCAL_ONLY 类似，忽略来自其他网状网络的消息，但更进一步，忽略来自不在节点已知列表中的节点的消息。 + 无 + 仅限 SENSOR、TRACKER 和 TAK_TRACKER 角色，此模式将禁止所有重新广播，与 CLIENT_MUTE 角色类似。 + Core Portnums Only + 忽略来自非标准端口号（如 TAK、RangeTest、PaxCounter 等）的数据包，仅重新广播标准端口号的数据包：NodeInfo、Text、Position、Telemetry 和 Routing。 将支持的加速度计上的双击操作视为 User 按键的按压动作。 - 禁用 User 按键的三击操作来启用或禁用 GPS。 - 控制设备上的指示灯闪烁。对于大多数设备，这将控制最多 4 个指示灯，充电器和 GPS 指示灯无法控制。 + 当用户按钮被点击三次时，在主通道上发送定位。 + 控制设备上的指示灯闪烁。对于大多数设备，这将控制最多 4 个指示灯，充电器和 GPS 指示灯无法控制。 + Time zone for dates on the device screen and log. 是否除了发送到 MQTT 和 PhoneAPI 外，还应通过 LoRa 传输我们的邻居信息（NeighborInfo）。在具有默认密钥和名称的通道上不可用。 - 公钥 + 按下用户按钮或收到消息后屏幕保持亮屏的时间。 + 根据指定的时间间隔，像旋转木马一样自动切换到屏幕上的下一页。 + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + 使用电台的地区。 + 可用的调制解调器预置，默认为 “Long Fast”。 + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + 启用 WiFi 将禁用应用程序的蓝牙连接。 + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + 智能位置广播考虑的最小距离变化（以米为单位）。 + 尝试获取 GPS 定位的频率。 + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + 尽可能让所有设备处于睡眠状态，对于跟踪器和传感器来说，这也包括 LoRa 无线电。如果您想将电台与手机 App 一起使用，或使用没有用户按钮的电台，请不要使用此设置。 + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + 设备由 Mesh 管理员管理，用户无法访问任何设备设置。 + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + 广播间隔 + Smart Position + Minimum Interval + Minimum Distance + 设备 GPS + Fixed Position + Altitude + Update Interval + 高级设备 GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + 调试 频道名称 QR 码 应用程序图标 @@ -314,7 +376,8 @@ 电池电量低: %s 低电量通知 (收藏节点) 气压 - 通过 UDP 的Mesh + 启用 + UDP Broadcast UDP 设置 最后听到: %2$s
最后位置: %3$s
电量: %4$s]]> 切换我的位置 @@ -392,27 +455,27 @@ 显示器的 GPIO 引脚 检测触发器类型 使用 输入上拉 模式 - 设备配置 - 角色 - 重新定义 PIN_BUTTON - 重新定义 PIN_BUZZER + 设备 + 设备角色 + 按钮 GPIO + 蜂鸣器 GPIO 转播模式 - 节点信息广播间隔 (秒) - 双击按键按钮 - 禁用三次点击 - POSIX 时区 - 禁用LED心跳 - 显示设置 - 屏幕超时(秒) - GPS坐标格式 - 自动旋转屏幕(秒) + Node Info Broadcast Interval + 双击作为按钮 + Triple Click Ad Hoc Ping + Time Zone + LED 心跳 + 显示 + Screen on for + Carousel interval 罗盘总是朝北 翻转屏幕 显示单位 - 覆盖 OLED 自动检测 + OLED type 显示模式 - 标题粗体 - 点击或移动时唤醒屏幕 + Always point north + Bold Heading + Wake on tap or motion 罗盘方向 外部通知设置 启用外部通知 @@ -433,25 +496,27 @@ 屏幕超时(秒) 铃声 使用 I2S 作为蜂鸣器 - LoRa 配置 - 使用调制解调器预设 - 调制解调器预设 + LoRa + 选项 + 高级 + 使用预设 + 预设 带宽 - 传播因子 - 编码速率 + Spread Factor + 编码率 频率偏移(MHz) - 地区(频率计划) - 跳跃限制 + 区域 + Number of hops 启用传输 - 传输功率(dBm) - 频率槽位 + Transmit Power + Frequency Slot 覆盖占空比 忽略接收 - SX126X 接收强化增益 - 覆盖频率(MHz) + RX Boosted Gain + Frequency Override PA风扇已禁用 忽略 MQTT - 使用MQTT + Ok to MQTT MQTT设置 启用MQTT 地址 @@ -468,10 +533,13 @@ 启用邻居信息 更新间隔（秒） 通过 LoRa 传输 - 网络配置 + 网络 + WiFi Options + 启用 启用 WiFi SSID 共享密钥/PSK + Ethernet Options 启用以太网 NTP 服务器 rsyslog 服务器 @@ -483,7 +551,7 @@ 启用 Paxcount WiFi RSSI 阈值(默认为-80) BLE RSSI 阈值(默认为-80) - 位置设置 + 定位 位置广播间隔 (秒) 启用智能位置 智能广播最小距离(米) @@ -501,7 +569,9 @@ 定位日志 电源配置 启用节能模式 + Shutdown on power loss 电池延迟关闭(秒) + ADC multiplier override ADC乘数修正比率 等待蓝牙持续时间 (秒) 深度睡眠时间(秒) @@ -516,7 +586,9 @@ 启用远程硬件 允许未定义的引脚访问 可用引脚 - 安全设置 + 安全 + Direct Message Key + Admin Keys 公钥 私钥 管理员密钥 @@ -787,4 +859,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration diff --git a/app/src/main/res/values-zh-rTW/strings.xml b/app/src/main/res/values-zh-rTW/strings.xml index 73a91ba1f..effdbbc74 100644 --- a/app/src/main/res/values-zh-rTW/strings.xml +++ b/app/src/main/res/values-zh-rTW/strings.xml @@ -53,29 +53,91 @@ 未知公鑰 無效的會話金鑰 無法識別公鑰 - 應用程式連接或獨立收發裝置。 - 對其他裝置封包不予轉播的節點。 - 加強網路覆蓋的中繼基地台節點。顯示在節點列表上。 - 兼具路由器和用戶端功能的節點。行動裝置不宜使用。 - 加強網路覆蓋的中繼基地台節點，但轉播時僅添加最低限度的額外負擔（Overhead）。不會顯示在節點列表上。 - 優先廣播 GPS 位置封包。 - 優先廣播遙測資料封包。 - 最佳化以供 ATAK 系統通訊使用，減少日常廣播量。 - 基於省電或隱私需求，僅提供最低限度廣播通訊的節點。 - 定期向預設頻道播送定位的裝置，以便於裝置復原。 - 啓用自動 TAK PLI 廣播，將減少定期廣播。 - 基礎建設節點，總是在所有其他模式之後才重新廣播一次封包，以確保本地群集有額外的覆蓋範圍。在節點清單中可見。 - 重播任何觀察到的訊息，如果它是在我們的私人頻道上或來自具有相同 lora 參數的其他網路上。 - 與「ALL」行為相同，但會跳過封包解碼，僅重新廣播它們。此功能僅適用於中繼器角色。在其他角色上設定此功能將導致「ALL」行為。 - 忽略來自開放的或無法解密的外部 Mesh 觀察到的訊息。僅轉播來自本地節點的主要/次要頻道的訊息。 - 近似於 LOCAL_ONLY 角色，將忽略來自外部Mesh節點的訊息，同時也忽略已知節點列表以外節點的訊息。 - 僅允許 SENSOR、TRACKER 和 TAK_TRACKER 角色，與 CLIENT_MUTE 角色不同，此模式將禁止所有重新廣播行為。 - 忽略來自非標準通訊埠號（諸如 TAK、RangeTest、PaxCounter 等）的封包，僅重新廣播標準通訊埠號的封包：NodeInfo、Text、Position、Telemetry 和 Routing。 + Client + 應用程式連接或獨立收發裝置。 + Client Mute + 對其他裝置封包不予轉播的節點。 + Router + 加強網路覆蓋的中繼基地台節點。顯示在節點列表上。 + Router Client + 兼具路由器和用戶端功能的節點。行動裝置不宜使用。 + Repeater + 加強網路覆蓋的中繼基地台節點，但轉播時僅添加最低限度的額外負擔（Overhead）。不會顯示在節點列表上。 + Tracker + 優先廣播 GPS 位置封包。 + Sensor + 優先廣播遙測資料封包。 + TAK + 最佳化以供 ATAK 系統通訊使用，減少日常廣播量。 + Client Hidden + 基於省電或隱私需求，僅提供最低限度廣播通訊的節點。 + Lost and Found + 定期向預設頻道播送定位的裝置，以便於裝置復原。 + TAK Tracker + 啓用自動 TAK PLI 廣播，將減少定期廣播。 + Router Late + 基礎建設節點，總是在所有其他模式之後才重新廣播一次封包，以確保本地群集有額外的覆蓋範圍。在節點清單中可見。 + 全部 + 重播任何觀察到的訊息，如果它是在我們的私人頻道上或來自具有相同 lora 參數的其他網路上。 + All Skip Decoding + 與「ALL」行為相同，但會跳過封包解碼，僅重新廣播它們。此功能僅適用於中繼器角色。在其他角色上設定此功能將導致「ALL」行為。 + Local Only + 忽略來自開放的或無法解密的外部 Mesh 觀察到的訊息。僅轉播來自本地節點的主要/次要頻道的訊息。 + Known Only + 近似於 LOCAL_ONLY 角色，將忽略來自外部Mesh節點的訊息，同時也忽略已知節點列表以外節點的訊息。 + 無 + 僅允許 SENSOR、TRACKER 和 TAK_TRACKER 角色，與 CLIENT_MUTE 角色不同，此模式將禁止所有重新廣播行為。 + Core Portnums Only + 忽略來自非標準通訊埠號（諸如 TAK、RangeTest、PaxCounter 等）的封包，僅重新廣播標準通訊埠號的封包：NodeInfo、Text、Position、Telemetry 和 Routing。 將支援加速度計上的雙撃行為視作按壓使用者按鍵。 - 停用透過點擊使用者按鈕三次開啓/關閉 GPS 功能。 - 控制裝置上閃爍的 LED。對大多數裝置而言，這將控制最多 4 個 LED 中的一個，充電器和 GPS LED 則無法控制。 + Send a position on the primary channel when the user button is triple clicked. + 控制裝置上閃爍的 LED。對大多數裝置而言，這將控制最多 4 個 LED 中的一個，充電器和 GPS LED 則無法控制。 + Time zone for dates on the device screen and log. 除了發送至 MQTT 和 PhoneAPI 之外，我們的 NeighborInfo 是否也透過 LoRa 發送？此功能無法在使用預設密鑰和名稱的頻道使用。 - 公鑰 + How long the screen remains on after the user button is pressed or messages are received. + Automatically toggles to the next page on the screen like a carousel, based the specified interval. + The compass heading on the screen outside of the circle will always point north. + Flip screen vertically. + Units displayed on the device screen. + Override automatic OLED screen detection. + Override default screen layout. + Bold the heading text on the screen. + Requires that there be an accelerometer on your device. + The region where you will be using your radios. + Available modem presets, default is Long Fast. + Sets the maximum number of hops, default is 3. Increasing hops also increases congestion and should be used carefully. 0 hop broadcast messages will not get ACKs. + Your node’s operating frequency is calculated based on the region, modem preset, and this field. When 0, the slot is automatically calculated based on the primary channel name. + Enabling WiFi will disable the bluetooth connection to the app. + Enabling Ethernet will disable the bluetooth connection to the app. TCP node connections are not available on Apple devices. + Enable broadcasting packets via UDP over the local network. + The maximum interval that can elapse without a node broadcasting a position. + The fastest that position updates will be sent if the minimum distance has been satisfied. + The minimum distance change in meters to be considered for a smart position broadcast. + How often should we try to get a GPS position. + Optional fields to include when assembling position messages. the more fields are included, the larger the message will be - leading to longer airtime and a higher risk of packet loss. + Will sleep everything as much as possible, for the tracker and sensor role this will also include the lora radio. Don\'t use this setting if you want to use your device with the phone apps or are using a device without a user button. + Generated from your public key and sent out to other nodes on the mesh to allow them to compute a shared secret key. + Used to create a shared key with a remote device. + The public key authorized to send admin messages to this node. + Device is managed by a mesh administrator, the user is unable to access any of the device settings. + Serial Console over the Stream API. + Output live debug logging over serial, view and export position-redacted device logs over Bluetooth. + + Position Packet + Broadcast Interval + Smart Position + Minimum Interval + Minimum Distance + Device GPS + Fixed Position + Altitude + Update Interval + Advanced Device GPS + GPS Receive GPIO + GPS Transmit GPIO + GPS EN GPIO + GPIO + 调试 頻道名稱 QRCODE 應用程式圖示 @@ -312,7 +374,8 @@ 低電量:%s 低電量通知(收藏節點) 氣壓 - 通过 UDP 的Mesh + Enabled + UDP Broadcast UDP設置 最後接收: %2$s
最後位置: %3$s
電量: %4$s]]> 切換我的位置 @@ -390,27 +453,27 @@ 螢幕的 GPIO 腳位 偵測觸發類型 使用輸入上拉模式 - 設備設置 - 角色 - 重新定義按鈕腳位 - 重新定義蜂鳴器腳位 - 轉發模式 - 節點資訊廣播間隔（秒） - 雙擊視為按鈕操作 - 禁用三擊 - POSIX時區 - 禁用LED心跳 - 顯示設置 - 屏幕超時時間(秒) - GPS坐標格式 - 自動荧幕轉盤（秒） + 裝置 + Device Role + Button GPIO + Buzzer GPIO + Rebroadcast Mode + Node Info Broadcast Interval + Double Tap as Button + Triple Click Ad Hoc Ping + Time Zone + LED Heartbeat + 顯示 + Screen on for + Carousel interval 總是以指南針北為上 翻轉畫面 顯示單位 - 覆寫OLED自動偵測 + OLED type 顯示模式 - 標題加粗 - 點擊或移動時喚醒屏幕 + Always point north + Bold Heading + Wake on tap or motion 羅盤朝向 外部通知配寘 啟用外部通知 @@ -431,25 +494,27 @@ 通知逾時時間（秒） 鈴聲 使用 I2S 控制蜂鳴器 - LoRa 設定 - 使用 Modem 預設集 - Modem 預設集 + LoRa + Options + 進階 + Use Preset + Presets 帶寬 - 展頻因數 (SF) - 編碼率（CR） + Spread Factor + Coding Rate 頻率偏移量 (MHz) - 區域（頻段劃分） - 最大轉發限制 - TX已啟用 - TX功率 (dBm) - 頻率槽位 + 地區 + Number of hops + Transmit Enabled + Transmit Power + Frequency Slot 覆蓋工作週期/佔空比 忽略來訊 - SX126X 接收增益提升 - 複寫頻率(MHz) + RX Boosted Gain + Frequency Override 停用PA風扇 無視MQTT - 將消息轉發至MQTT + Ok to MQTT MQTT配置 啟用MQTT服務器 地址 @@ -466,10 +531,13 @@ 啟用鄰居資訊 更新間隔（秒） 通過Lora無線電傳輸 - 網路配置 + 網路 + WiFi Options + Enabled 啟用WiFi SSID PSK + Ethernet Options 啟用以太網 時間伺服器 rsyslog伺服器 @@ -481,7 +549,7 @@ 啟用Paxcount WiFi RSSI 閾值(預設為-80) 藍牙 RSSI 閾值(預設為-80) - 位置設定 + 位置 位置廣播間隔（秒） 啟用智慧位置 智慧廣播最小距離（公尺） @@ -499,7 +567,9 @@ 定位日誌 電源設定 啟用省電模式 + Shutdown on power loss 電池延時關閉（秒） + ADC multiplier override ADC乘數修正比率 等待藍牙持續時間（秒） 深度睡眠時間（秒） @@ -514,7 +584,9 @@ 啟動遠端硬體 允許未定義腳位連接 可用腳位 - 安全性設定 + 安全 + Direct Message Key + Admin Keys 公鑰 私鑰 管理員金鑰 @@ -786,4 +858,5 @@ Messages from a public internet gateway are forwarded to the local mesh. Due to the zero-hop policy, traffic from the default MQTT server will not propagate further than this device. Icon Meanings Disabling position on the primary channel allows periodic position broadcasts on the first secondary channel with the position enabled, otherwise manual position request required. + Device configuration