mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-04-20 22:13:47 +00:00
e2aa33b3a0
Adds a LEDManager class (src/helpers/ui/LEDManager.h) that centralizes all LED control into one component with begin()/loop() lifecycle and per-pin active-HIGH/LOW polarity support. LED settings are exposed as custom vars (led.status, led.activity) accessible via companion radio binary protocol, CLI set/get commands, and the SensorManager settings interface. Status LED modes: off, boot-30s, slow blink (200ms/4s), always on. Activity LED modes: off, BLE only, LoRa TX only, BLE + LoRa TX. Integrated into 23 board variants, replacing scattered hardcoded digitalWrite calls in onBeforeTransmit/onAfterTransmit/powerOff.
77 lines
No EOL
2 KiB
C++
77 lines
No EOL
2 KiB
C++
#pragma once
|
|
|
|
#include <MeshCore.h>
|
|
#include <Arduino.h>
|
|
#include <helpers/NRF52Board.h>
|
|
#include <helpers/ui/LEDManager.h>
|
|
|
|
// LoRa and SPI pins
|
|
|
|
#define P_LORA_DIO_1 (32 + 12) // P1.12
|
|
#define P_LORA_NSS (32 + 13) // P1.13
|
|
#define P_LORA_RESET (32 + 11) // P1.11
|
|
#define P_LORA_BUSY (32 + 10) // P1.10
|
|
#define P_LORA_SCLK (32 + 15) // P1.15
|
|
#define P_LORA_MISO (0 + 29) // P0.29
|
|
#define P_LORA_MOSI (0 + 2) // P0.2
|
|
|
|
#define LR11X0_DIO_AS_RF_SWITCH true
|
|
#define LR11X0_DIO3_TCXO_VOLTAGE 1.6
|
|
|
|
#define PIN_VBAT_READ BATTERY_PIN
|
|
#define ADC_MULTIPLIER (1.815f) // dependent on voltage divider resistors. TODO: more accurate battery tracking
|
|
|
|
class MinewsemiME25LS01Board : public NRF52BoardDCDC {
|
|
protected:
|
|
uint8_t btn_prev_state;
|
|
|
|
public:
|
|
MinewsemiME25LS01Board() : NRF52Board("Minewsemi_OTA") {}
|
|
void begin();
|
|
|
|
#define BATTERY_SAMPLES 8
|
|
|
|
uint16_t getBattMilliVolts() override {
|
|
analogReadResolution(12);
|
|
|
|
uint32_t raw = 0;
|
|
for (int i = 0; i < BATTERY_SAMPLES; i++) {
|
|
raw += analogRead(PIN_VBAT_READ);
|
|
}
|
|
raw = raw / BATTERY_SAMPLES;
|
|
return (ADC_MULTIPLIER * raw);
|
|
}
|
|
|
|
const char* getManufacturerName() const override {
|
|
return "Minewsemi";
|
|
}
|
|
|
|
void powerOff() override {
|
|
#ifdef HAS_GPS
|
|
digitalWrite(GPS_VRTC_EN, LOW);
|
|
digitalWrite(GPS_RESET, LOW);
|
|
digitalWrite(GPS_SLEEP_INT, LOW);
|
|
digitalWrite(GPS_RTC_INT, LOW);
|
|
pinMode(GPS_RESETB, OUTPUT);
|
|
digitalWrite(GPS_RESETB, LOW);
|
|
#endif
|
|
|
|
#ifdef BUZZER_EN
|
|
digitalWrite(BUZZER_EN, LOW);
|
|
#endif
|
|
|
|
if (ledManager) ledManager->powerOff();
|
|
|
|
#ifdef BUTTON_PIN
|
|
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(BUTTON_PIN), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_HIGH);
|
|
#endif
|
|
sd_power_system_off();
|
|
}
|
|
|
|
void onBeforeTransmit() override {
|
|
if (ledManager) ledManager->onBeforeTransmit();
|
|
}
|
|
void onAfterTransmit() override {
|
|
if (ledManager) ledManager->onAfterTransmit();
|
|
}
|
|
}; |