mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-04-20 22:13:47 +00:00
e2aa33b3a0
Adds a LEDManager class (src/helpers/ui/LEDManager.h) that centralizes all LED control into one component with begin()/loop() lifecycle and per-pin active-HIGH/LOW polarity support. LED settings are exposed as custom vars (led.status, led.activity) accessible via companion radio binary protocol, CLI set/get commands, and the SensorManager settings interface. Status LED modes: off, boot-30s, slow blink (200ms/4s), always on. Activity LED modes: off, BLE only, LoRa TX only, BLE + LoRa TX. Integrated into 23 board variants, replacing scattered hardcoded digitalWrite calls in onBeforeTransmit/onAfterTransmit/powerOff.
49 lines
1.2 KiB
C++
49 lines
1.2 KiB
C++
#include "MeshtinyBoard.h"
|
|
|
|
#include <Arduino.h>
|
|
#include <Wire.h>
|
|
#include <bluefruit.h>
|
|
|
|
static BLEDfu bledfu;
|
|
|
|
static void connect_callback(uint16_t conn_handle) {
|
|
(void)conn_handle;
|
|
MESH_DEBUG_PRINTLN("BLE client connected");
|
|
}
|
|
|
|
static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
|
|
(void)conn_handle;
|
|
(void)reason;
|
|
|
|
MESH_DEBUG_PRINTLN("BLE client disconnected");
|
|
}
|
|
|
|
void MeshtinyBoard::begin() {
|
|
NRF52BoardDCDC::begin();
|
|
btn_prev_state = HIGH;
|
|
|
|
pinMode(PIN_VBAT_READ, INPUT); // VBAT ADC input
|
|
|
|
// Set all button pins to INPUT_PULLUP
|
|
pinMode(PIN_BUTTON1, INPUT_PULLUP);
|
|
pinMode(PIN_BUTTON2, INPUT_PULLUP);
|
|
pinMode(PIN_BUTTON3, INPUT_PULLUP);
|
|
pinMode(PIN_BUTTON4, INPUT_PULLUP);
|
|
|
|
#if defined(PIN_WIRE_SDA) && defined(PIN_WIRE_SCL)
|
|
Wire.setPins(PIN_WIRE_SDA, PIN_WIRE_SCL);
|
|
#endif
|
|
|
|
Wire.begin();
|
|
|
|
pinMode(SX126X_POWER_EN, OUTPUT);
|
|
digitalWrite(SX126X_POWER_EN, HIGH);
|
|
delay(10); // give sx1262 some time to power up
|
|
|
|
// Start LEDs with defaults; prefs are applied after loadPrefs()
|
|
static LEDManager _ledManager(LED_GREEN, PIN_LED2);
|
|
ledManager = &_ledManager;
|
|
ledManager->begin(LED_STATUS_BOOT_30S, LED_ACTIVITY_BOTH);
|
|
}
|
|
|
|
|