mirror of
https://github.com/meshcore-dev/MeshCore.git
synced 2026-04-20 22:13:47 +00:00
5d495d505a
As discussed on discord with @recrof people are having issues, possibly due to these changes. See https://github.com/meshcore-dev/MeshCore/issues/746
This reverts commit a16e011bd2.
55 lines
1.3 KiB
C++
55 lines
1.3 KiB
C++
#pragma once
|
|
|
|
#include <MeshCore.h>
|
|
#include <Arduino.h>
|
|
|
|
// built-ins
|
|
#define PIN_VBAT_READ 4
|
|
#define PIN_BAT_CTL 6
|
|
#define MV_LSB (3000.0F / 4096.0F) // 12-bit ADC with 3.0V input range
|
|
|
|
class T114Board : public mesh::MainBoard {
|
|
protected:
|
|
uint8_t startup_reason;
|
|
|
|
public:
|
|
void begin();
|
|
uint8_t getStartupReason() const override { return startup_reason; }
|
|
|
|
#if defined(P_LORA_TX_LED)
|
|
void onBeforeTransmit() override {
|
|
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED on
|
|
}
|
|
void onAfterTransmit() override {
|
|
digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED off
|
|
}
|
|
#endif
|
|
|
|
uint16_t getBattMilliVolts() override {
|
|
int adcvalue = 0;
|
|
analogReadResolution(12);
|
|
analogReference(AR_INTERNAL_3_0);
|
|
pinMode(PIN_BAT_CTL, OUTPUT); // battery adc can be read only ctrl pin 6 set to high
|
|
digitalWrite(PIN_BAT_CTL, 1);
|
|
|
|
delay(10);
|
|
adcvalue = analogRead(PIN_VBAT_READ);
|
|
digitalWrite(6, 0);
|
|
|
|
return (uint16_t)((float)adcvalue * MV_LSB * 4.9);
|
|
}
|
|
|
|
const char* getManufacturerName() const override {
|
|
return "Heltec T114";
|
|
}
|
|
|
|
void reboot() override {
|
|
NVIC_SystemReset();
|
|
}
|
|
|
|
void powerOff() override {
|
|
sd_power_system_off();
|
|
}
|
|
|
|
bool startOTAUpdate(const char* id, char reply[]) override;
|
|
};
|